Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Effect of metal-ligand ratio on the CO₂ adsorption properties of Cu-BTC metal-organic frameworks.

ABSTRACT: Initially, in the synthesis of Cu-BTC MOFs some fraction of Cu was expected to be replaced with Mg to enhance its CO₂ adsorption properties. Indeed, an enhancement in the specific surface area, microporosity and CO₂ adsorption capacity was observed; however, Mg was not detected. Therefore, additional syntheses of Cu-BTC MOFs with the same Cu to BTC ratios were performed but in the absence of Mg to explain the observed enhancement. It was found that the adjustment of the Cu-BTC ratio to 1.09 : 1.0, which differs from that reported in the literature, resulted in a Cu-BTC MOF with higher specific BET surface area, larger micropore volume, and consequently, superior CO₂ adsorption of 9.33 mmol g^-1 at 0 °C and 1 bar.

SUBMITTER: Liu Y

PROVIDER: S-EPMC9087989 | biostudies-literature | 2018 Oct

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Effect of metal-ligand ratio on the CO2 adsorption properties of Cu-BTC metal-organic frameworks.

Liu Yuanyuan Y Liu Suqin S Gonçalves Alexandre A S AAS Jaroniec Mietek M

RSC advances 20181017 62

Initially, in the synthesis of Cu-BTC MOFs some fraction of Cu was expected to be replaced with Mg to enhance its CO2 adsorption properties. Indeed, an enhancement in the specific surface area, microporosity and CO2 adsorption capacity was observed; however, Mg was not detected. Therefore, additional syntheses of Cu-BTC MOFs with the same Cu to BTC ratios were performed but in the absence of Mg to explain the observed enhancement. It was found that the adjustment of the Cu- ...[more]

PMID: 35547909

Similar Datasets

Mixed-Metal Cu-BTC Metal-Organic Frameworks as a Strong Adsorbent for Molecular Hydrogen at Low Temperatures.

Project description:The advancement of hydrogen and fuel cell technologies hinges on the development of hydrogen storage methods. Metal-organic frameworks (MOFs) are one of the most favorable materials for hydrogen storage. In this study, we synthesized a series of isostructural mixed-metal metal-organic frameworks (MM-MOFs) of 1,3,5-benzenetricarboxylate (BTC), M-Cu-BTC, where M = Zn2+, Ni2+, Co2+, and Fe2+ using the post-synthetic exchange (PSE) method with metal ions. The powder X-ray diffraction patterns of MM-MOFs were similar with those of single-metal Cu-BTC. Scanning electron microscopy indicates the absence of amorphous phases. Inductively coupled plasma mass spectroscopy of the MM-MOFs shows successful metal exchanges using the PSE method. The N2 adsorption measurements confirmed the successful synthesis of porous MM-MOFs. The metal exchanged materials Ni-Cu-BTC, Zn-Cu-BTC, Fe-Cu-BTC, and Co-Cu-BTC were studied for hydrogen storage and showed a gravimetric uptake of 1.6, 1.63, 1.63, and 1.12 wt %; respectively. The increase in hydrogen adsorption capacity for the three metal exchanged materials is about 60% relative to that of the parent MOF (Cu-BTC). The improvement of gravimetric uptake in M-Cu-BTC (where M = Ni2+, Zn2+, and Fe2+) is probably due to the increase in binding enthalpy of H2 with the unsaturated metal sites after the partial exchange from Cu2+ to other metal ions. The higher charge density of metal ions strongly polarizes hydrogen and provides the primary binding sites inside the pores of Cu-BTC and subsequently enhances the gravimetric uptake of hydrogen.

| S-EPMC7658931 | biostudies-literature

Synthesis of bimetallic-organic framework Cu/Co-BTC and the improved performance of thiophene adsorption.

Project description:A bimetallic-organic porous material (Cu/Co-BTC) with a paddle-wheel structure has been successfully synthesized by a solvothermal approach. The as-synthesized materials were characterized by XRD, SEM, ICP-AES, UV-Vis, TGA and N2 adsorption at 77 K. The prepared Cu/Co-BTC samples were investigated in thiophene (TP) adsorption from model gasolines by the fixed bed adsorption method at 298 K. The results showed that only a small amount of Co could be successfully introduced into the framework of HKUST-1, and the introduction of Co had little effect on the crystalline structure, morphology, porosity, and thermal stability. The bimetallic Cu/Co-BTC with a Cu/Co ratio of 174 displayed significantly improved adsorption desulfurization performance, showing an increase in breakthrough volume by 30% compared with HKUST-1, implying that the central metal in the MOF plays an important role in adsorption desulfurization. The addition of toluene or cyclohexene (3.20-3.30 vol%) as a competitor in the model gasoline led to a decline in desulfurization performance, especially when cyclohexene was added. The bimetallic Cu/Co-BTC showed a slight loss in breakthrough volume by only 5% after regenerating 7 times, displaying an excellent regeneration property.

| S-EPMC9064320 | biostudies-literature

Cu and Zn promoted Al-fumarate metal organic frameworks for electrocatalytic CO2 reduction.

Project description:Metal organic frameworks (MOFs) are attractive materials to generate multifunctional catalysts for the electrocatalytic reduction of CO2 to hydrocarbons. Here we report the synthesis of Cu and Zn modified Al-fumarate (Al-fum) MOFs, in which Zn promotes the selective reduction of CO2 to CO and Cu promotes CO reduction to oxygenates and hydrocarbons in an electrocatalytic cascade. Cu and Zn nanoparticles (NPs) were introduced to the Al-fum MOF by a double solvent method to promote in-pore metal deposition, and the resulting reduced Cu-Zn@Al-fum drop-cast on a hydrophobic gas diffusion electrode for electrochemical study. Cu-Zn@Al-fum is active for CO2 electroreduction, with the Cu and Zn loading influencing the product yields. The highest faradaic efficiency (FE) of 62% is achieved at -1.0 V vs. RHE for the conversion of CO2 into CO, HCOOH, CH4, C2H4 and C2H5OH, with a FE of 28% to CH4, C2H4 and C2H5OH at pH 6.8. Al-fum MOF is a chemically robust matrix to disperse Cu and Zn NPs, improving electrocatalyst lifetime during CO2 reduction by minimizing transition metal aggregation during electrode operation.

| S-EPMC10801401 | biostudies-literature

Controlling Cooperative CO2 Adsorption in Diamine-Appended Mg2(dobpdc) Metal-Organic Frameworks.

Project description:In the transition to a clean-energy future, CO2 separations will play a critical role in mitigating current greenhouse gas emissions and facilitating conversion to cleaner-burning and renewable fuels. New materials with high selectivities for CO2 adsorption, large CO2 removal capacities, and low regeneration energies are needed to achieve these separations efficiently at scale. Here, we present a detailed investigation of nine diamine-appended variants of the metal-organic framework Mg2(dobpdc) (dobpdc4- = 4,4'-dioxidobiphenyl-3,3'-dicarboxylate) that feature step-shaped CO2 adsorption isotherms resulting from cooperative and reversible insertion of CO2 into metal-amine bonds to form ammonium carbamate chains. Small modifications to the diamine structure are found to shift the threshold pressure for cooperative CO2 adsorption by over 4 orders of magnitude at a given temperature, and the observed trends are rationalized on the basis of crystal structures of the isostructural zinc frameworks obtained from in situ single-crystal X-ray diffraction experiments. The structure-activity relationships derived from these results can be leveraged to tailor adsorbents to the conditions of a given CO2 separation process. The unparalleled versatility of these materials, coupled with their high CO2 capacities and low projected energy costs, highlights their potential as next-generation adsorbents for a wide array of CO2 separations.

| S-EPMC8224824 | biostudies-literature

Investigation on Electroreduction of CO2 to Formic Acid Using Cu3(BTC)2 Metal-Organic Framework (Cu-MOF) and Graphene Oxide.

Project description:A recent class of porous materials, viz., metal-organic frameworks (MOFs), finds applications in several areas. In this work, Cu-based MOFs (Cu-benzene-1,3,5-tricarboxylic acid) along with graphene oxide, viz., Cu-MOF/GO, are synthesized and used further for reducing CO2 electrochemically. The reduction was accomplished in various supporting electrolytes, viz., KHCO3/H2O, tetrabutylammonium bromide (TBAB)/dimethylformamide (DMF), KBr/CH3OH, CH3COOK/CH3OH, TBAB/CH3OH, and tetrabutylammonium perchlorate (TBAP)/CH3OH to know their effect on product formation. The electrode fabricated with the synthesized material was used for testing the electroreduction of CO2 at various polarization potentials. The electrochemical reduction of CO2 is carried out via the polarization technique within the experimented potential regime vs saturated calomel electrode (SCE). Ion chromatography was employed for the analysis of the produced products in the electrolyte, and the results showed that HCOOH was the main product formed through reduction. The highest concentrations of HCOOH formed for different electrolytes are 0.1404 mM (-0.1 V), 66.57 mM (-0.6 V), 0.2690 mM (-0.5 V), 0.2390 mM (-0.5 V), 0.7784 mM (-0.4 V), and 0.3050 mM (-0.45 V) in various supporting electrolyte systems, viz., KHCO3/H2O, TBAB/DMF, KBr/CH3OH, CH3COOK/CH3OH, TBAB/CH3OH, and TBAP/CH3OH, respectively. The developed catalyst accomplished a significant efficiency in the conversion and reduction of CO2. A high faradic efficiency of 58% was obtained with 0.1 M TBAB/DMF electrolyte, whereas for Cu-MOF alone, the efficiency was 38%. Thus, the work is carried out using a cost-effective catalyst for the conversion of CO2 to formic acid than using the commercial electrodes. The synergistic effect of GO sheets at 3 wt % concentration and Cu+OH- interaction leads to the formation of formic acid in various electrolytes.

| S-EPMC7513332 | biostudies-literature

An experimental and computational study of CO2 adsorption in the sodalite-type M-BTT (M = Cr, Mn, Fe, Cu) metal-organic frameworks featuring open metal sites.

Project description:We present a comprehensive investigation of the CO2 adsorption properties of an isostructural series of metal-organic frameworks, M-BTT (M = Cr, Mn, Fe, Cu; BTT3- = 1,3,5-benzenetristetrazolate), which exhibit a high density of open metal sites capable of polarizing and binding guest molecules. Coupling gas adsorption measurements with in situ neutron and X-ray diffraction experiments provides molecular-level insight into the adsorption process and enables rationalization of the observed adsorption isotherms. In particular, structural data confirms that the high initial isosteric heats of CO2 adsorption for the series are directly correlated with the presence of open metal sites and further reveals the positions and orientations of as many as three additional adsorption sites. Density functional theory calculations that include van der Waals dispersion corrections quantitatively support the observed structural features associated with the primary and secondary CO2 binding sites, including CO2 positions and orientations, as well as the experimentally determined isosteric heats of CO2 adsorption.

| S-EPMC5969499 | biostudies-literature

Three-dimensional printed acrylonitrile butadiene styrene framework coated with Cu-BTC metal-organic frameworks for the removal of methylene blue.

Project description:Three-dimensional (3D) printing was applied for the fabrication of acrylonitrile butadiene styrene (ABS) framework. Functionalization of the ABS framework was then performed by coating of porous Cu-BTC (BTC = benzene tricarboxylic acid) metal-organic frameworks on it using a step-by-step in-situ growth. The size of the Cu-BTC particles on ABS was ranged from 200 nm to 900 nm. The Cu-BTC/ABS framework can take up most of the space of the tubular reactor that makes the adsorption effective with no need of stirring. Methylene blue (MB) can be readily removed from aqueous solution by this Cu-BTC/ABS framework. The MB removal efficiency for solutions with concentrations of 10 and 5 mg/L was 93.3% and 98.3%, respectively, within 10 min. After MB adsorption, the Cu-BTC/ABS composite can easily be recovered without the need for centrifugation or filtration and the composite is reusable. In addition the ABS framework can be recovered for subsequent reuse. A significant advantage of 3D-printed frameworks is that different frameworks can be easily fabricated to meet the needs of different applications. This is a promising strategy to synthesize new frameworks using MOFs and polymers to develop materials for applications beyond adsorption.

| S-EPMC4123204 | biostudies-other

Polyethyleneimine-Modified UiO-66-NH2(Zr) Metal-Organic Frameworks: Preparation and Enhanced CO2 Selective Adsorption.

Project description:UiO-66-NH2, a zirconium-based functional metal-organic framework (MOF), was postsynthetically modified via Schiff base reaction between aldehyde groups in glutaraldehyde and amino groups in UiO-66-NH2 and CO2-preabsorbed polyethyleneimine (PEI). The resulting PEI-modified MOFs, abbreviated as PEIC@UiO, were characterized with 1H NMR, Fourier transform infrared, powder X-ray diffraction, Brunauer-Emmett-Teller, scanning electron microscopy, and thermogravimetric analysis and evaluated as CO2 adsorbents. In comparison with pristine UiO-66-NH2, the PEIC@UiO adsorbents have reduced specific surface area (7-150 m2/g) but maintained the same crystal structure. Particularly, the PEIC96@UiO adsorbent exhibited significantly improved CO2/N2 adsorption selectivity (48 vs 25) and higher CO2 adsorption capacity (3.2 vs 2.7 mmol/g). The adsorbent also displayed moderate desorption energy (68 kJ/mol CO2), superior moisture endurance, and recyclability, which are very desirable for practical applications.

| S-EPMC6648867 | biostudies-literature

Modeling of CO2 adsorption capacity by porous metal organic frameworks using advanced decision tree-based models.

Project description:In recent years, metal organic frameworks (MOFs) have been distinguished as a very promising and efficient group of materials which can be used in carbon capture and storage (CCS) projects. In the present study, the potential ability of modern and powerful decision tree-based methods such as Categorical Boosting (CatBoost), Light Gradient Boosting Machine (LightGBM), Extreme Gradient Boosting (XGBoost), and Random Forest (RF) was investigated to predict carbon dioxide adsorption by 19 different MOFs. Reviewing the literature, a comprehensive databank was gathered including 1191 data points related to the adsorption capacity of different MOFs in various conditions. The inputs of the implemented models were selected as temperature (K), pressure (bar), specific surface area (m2/g) and pore volume (cm3/g) of the MOFs and the output was CO2 uptake capacity (mmol/g). Root mean square error (RMSE) values of 0.5682, 1.5712, 1.0853, and 1.9667 were obtained for XGBoost, CatBoost, LightGBM, and RF models, respectively. The sensitivity analysis showed that among all investigated parameters, only the temperature negatively impacts the CO2 adsorption capacity and the pressure and specific surface area of the MOFs had the most significant effects. Among all implemented models, the XGBoost was found to be the most trustable model. Moreover, this model showed well-fitting with experimental data in comparison with different isotherm models. The accurate prediction of CO2 adsorption capacity by MOFs using the XGBoost approach confirmed that it is capable of handling a wide range of data, cost-efficient and straightforward to apply in environmental applications.

| S-EPMC8714819 | biostudies-literature

Mesoporous Cu-Cu2O@TiO2 heterojunction photocatalysts derived from metal-organic frameworks.

Project description:This study reveals a unique Cu-Cu2O@TiO2 heterojunction photocatalyst obtained with metal-organic framework as the precursor, which can be utilized in dye photodegradation under visible light irradiation. The composition, structure, morphology, porosity, optical properties and photocatalytic performance of the obtained catalysts were all investigated in detail. The Cu-Cu2O@TiO2 nanocomposite is composed of lamellar Cu-Cu2O microspheres embedded by numerous TiO2 nanoparticles. Methylene blue, methyl orange and 4-nitrophenol were used as model pollutants to evaluate the photocatalytic activity of the Cu-Cu2O@TiO2 nanocomposite for dye degradation under visible light irradiation. Nearly 95% decolourisation efficiency of Methylene blue was achieved by the Cu-Cu2O@TiO2 photocatalyst within 3 h, which is much higher than that of TiO2 or Cu2O catalysts. The excellent photocatalytic activity was primarily attributed to the unique MOF-based mesoporous structure, the enlarged photo-adsorption range and the efficient separation of the charge carriers in the Cu-Cu2O@TiO2 heterojunction.

| S-EPMC9052089 | biostudies-literature