Dataset Information

Nano-imprinting of refractive-index-matched indium tin oxide sol-gel in light-emitting diodes for eliminating total internal reflection.

ABSTRACT: Refractive-index (RI)-matched nanostructures are implemented in GaN-based light-emitting diodes (LEDs) for enhancing light output efficiency. The RI-matched indium tin oxide (ITO) nanostructures are successfully implemented in GaN-based lateral LEDs by using ITO sol-gel and nanoimprint lithography. The ITO sol-gel nanostructures annealed at 300 °C have RI of 1.95, showing high transparency of 90% and high diffused transmittance of 34%. Consequently, the light output power in LEDs with the RI-matched nanostructures increases by 8% in comparison with that in LEDs containing flat ITO. Ray tracing and finite-difference time-domain (FDTD) simulations show that the RI-matched nanostructures on the transparent current spreading layer dramatically reduce Fresnel reflection loss at the interface of the current spreading layer with the nanostructure and extract confined waveguide lights in LEDs.

SUBMITTER: Kim S

PROVIDER: S-EPMC9089158 | biostudies-literature | 2018 Nov

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Nano-imprinting of refractive-index-matched indium tin oxide sol-gel in light-emitting diodes for eliminating total internal reflection.

Kim Sungjoo S Yoo Chul Jong CJ Park Jae Yong JY Baek Sangwon S Cho Won Seok WS Lee Jong-Lam JL

RSC advances 20181101 65

Refractive-index (RI)-matched nanostructures are implemented in GaN-based light-emitting diodes (LEDs) for enhancing light output efficiency. The RI-matched indium tin oxide (ITO) nanostructures are successfully implemented in GaN-based lateral LEDs by using ITO sol-gel and nanoimprint lithography. The ITO sol-gel nanostructures annealed at 300 °C have RI of 1.95, showing high transparency of 90% and high diffused transmittance of 34%. Consequently, the light output power in LEDs with the RI-mat ...[more]

PMID: 35557782

Similar Datasets

Project description:Fabrication and organosilane-functionalization and characterization of nanostructured ITO electrodes are reported. Nanostructured ITO electrodes were obtained by electron beam evaporation, and a subsequent annealing treatment was selectively performed to modify their crystalline state. An increase in geometrical surface area in comparison with thin-film electrodes area was observed by atomic force microscopy, implying higher electroactive surface area for nanostructured ITO electrodes and thus higher detection levels. To investigate the increase in detectability, chemical organosilane-functionalization of nanostructured ITO electrodes was performed. The formation of 3-glycidoxypropyltrimethoxysilane (GOPTS) layers was detected by X-ray photoelectron spectroscopy. As an indirect method to confirm the presence of organosilane molecules on the ITO substrates, cyclic voltammetry and electrochemical impedance spectroscopy (EIS) were also carried out. Cyclic voltammograms of functionalized ITO electrodes presented lower reduction-oxidation peak currents compared with non-functionalized ITO electrodes. These results demonstrate the presence of the epoxysilane coating on the ITO surface. EIS showed that organosilane-functionalized electrodes present higher polarization resistance, acting as an electronic barrier for the electron transfer between the conductive solution and the ITO electrode. The results of these electrochemical measurements, together with the significant difference in the X-ray spectra between bare ITO and organosilane-functionalized ITO substrates, may point to a new exploitable oxide-based nanostructured material for biosensing applications. As a first step towards sensing, rapid functionalization of such substrates and their application to electrochemical analysis is tested in this work. Interestingly, oxide-based materials are highly integrable with the silicon chip technology, which would permit the easy adaptation of such sensors into lab-on-a-chip configurations, providing benefits such as reduced size and weight to facilitate on-chip integration, and leading to low-cost mass production of microanalysis systems.

Dataset Information

Nano-imprinting of refractive-index-matched indium tin oxide sol-gel in light-emitting diodes for eliminating total internal reflection.

Publications

Nano-imprinting of refractive-index-matched indium tin oxide sol-gel in light-emitting diodes for eliminating total internal reflection.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets