Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Ender3 3D printer kit transformed into open, programmable syringe pump set.

ABSTRACT: A cheap, open source 3D printer (Creality Ender 3) is transformed into an Open Hardware, programmable syringe pump set. Only 3 parts need to be purchased outside of the printer kit. All other parts are either in the Ender 3 kit, or can be 3D printed. No prior knowledge in electronics or programming languages is required. The pumps are controlled by the 3D printer firmware and motherboard and programmed in simple G-code text files. The total cost of a three pumps setup is ∼€170. The pumps are capable of reaching stable flows down to 5 µL/min using cheap, disposable 10 mL syringes. Higher flow speeds are also achievable, in the order of mL/min.

SUBMITTER: Baas S

PROVIDER: S-EPMC9123459 | biostudies-literature | 2021 Oct

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Ender3 3D printer kit transformed into open, programmable syringe pump set.

Baas Sander S Saggiomo Vittorio V

HardwareX 20210803

A cheap, open source 3D printer (Creality Ender 3) is transformed into an Open Hardware, programmable syringe pump set. Only 3 parts need to be purchased outside of the printer kit. All other parts are either in the Ender 3 kit, or can be 3D printed. No prior knowledge in electronics or programming languages is required. The pumps are controlled by the 3D printer firmware and motherboard and programmed in simple G-code text files. The total cost of a three pumps setup is ∼€170. The pumps are cap ...[more]

PMID: 35607679

Similar Datasets

Development of affordable 3D food printer with an exchangeable syringe-pump mechanism.

Project description:The technique of additive manufacturing has increasing popularity in food research area as well as other scientific fields. However, 3D food printers are expensive options compared to 3D polymer printers. Scientists, that require laboratory scale production capacities, resemble the syringe-pump systems that available in open source and free hardware designs. Present study aimed to develop an exchangeable syringe-pump mechanism (SPM) to demonstrate transformation of conventional 3D printer from polymer to food extrusion. The SPM can print a variety of materials, including miscellaneous foods, pastes, hydrogels and even biopolymers. The complete mechanism relies mostly on 3D printed parts and costs approximately 72$. Therefore, it allows users to obtain a 3D food printer inexpensively and does not require large amounts of technical labor. The SPM uses big volume (60 ml) luer lock syringe and blunt tip needles for greater versatility and user-friendliness. It could also be extended with cooling mechanism, so that the proposed system gains unique attribute among its counterparts. Finally, a standard polymer-printing 3D-Printer was converted into a laboratory-scale food printer, and edible ink was successfully printed in the desired shape.

| S-EPMC10225918 | biostudies-literature

Open-source syringe pump library.

Project description:This article explores a new open-source method for developing and manufacturing high-quality scientific equipment suitable for use in virtually any laboratory. A syringe pump was designed using freely available open-source computer aided design (CAD) software and manufactured using an open-source RepRap 3-D printer and readily available parts. The design, bill of materials and assembly instructions are globally available to anyone wishing to use them. Details are provided covering the use of the CAD software and the RepRap 3-D printer. The use of an open-source Rasberry Pi computer as a wireless control device is also illustrated. Performance of the syringe pump was assessed and the methods used for assessment are detailed. The cost of the entire system, including the controller and web-based control interface, is on the order of 5% or less than one would expect to pay for a commercial syringe pump having similar performance. The design should suit the needs of a given research activity requiring a syringe pump including carefully controlled dosing of reagents, pharmaceuticals, and delivery of viscous 3-D printer media among other applications.

| S-EPMC4167991 | biostudies-literature

Open-source spring-driven syringe pump with 3D-printed components for microfluidic applications.

Project description:The operation of microfluidic devices requires precise and constant fluid flow. Microfluidic systems in low-resource settings require a portable, inexpensive, and electricity-free pumping approach due to the rising demand for microfluidics in point-of-care testing (POCT). Open-source alternatives, employing 3D printing and motors, offer affordability. However, using motors require electrical power, which often relies on external sources, hindering the on-site use of open-source pumps. This study introduces a spring-driven, 3D-printed syringe pump, eliminating the need for an external power source. The syringe pump is operated by the flat spiral spring's torque. By manually winding up the mainspring, the syringe pump can be operated without electricity. Various flow rates can be achieved by utilizing different syringe sizes and choosing the right gear combinations. All the parts of the syringe pump can be fabricated by 3D printing, requiring no additional components that require electricity. It operates by winding a mainspring and is user-friendly, allowing flow rate adjustments by assembling gears that modulate syringe plunger pushing velocity. The fabrication cost is $25-30 and can be assembled easily by following the instructions. We expect that the proposed syringe pump will enable the utilization of microfluidic technologies in resource-limited settings, promoting the adoption of microfluidics. Detailed information and results are available in the original research paper (https://doi.org/10.1016/j.snb.2024.135289).

| S-EPMC11299592 | biostudies-literature

Large volume syringe pump extruder for desktop 3D printers.

Project description:Syringe pump extruders are required for a wide range of 3D printing applications, including bioprinting, embedded printing, and food printing. However, the mass of the syringe becomes a major challenge for most printing platforms, requiring compromises in speed, resolution and/or volume. To address these issues, we have designed a syringe pump large volume extruder (LVE) that is compatible with low-cost, open source 3D printers, and herein demonstrate its performance on a PrintrBot Simple Metal. Key aspects of the LVE include: (1) it is open source and compatible with open source hardware and software, making it inexpensive and widely accessible to the 3D printing community, (2) it utilizes a standard 60 mL syringe as its ink reservoir, effectively increasing print volume of the average bioprinter, (3) it is capable of retraction and high speed movements, and (4) it can print fluids using nozzle diameters as small as 100 µm, enabling the printing of complex shapes/objects when used in conjunction with the freeform reversible embedding of suspended hydrogels (FRESH) 3D printing method. Printing performance of the LVE is demonstrated by utilizing alginate as a model biomaterial ink to fabricate parametric CAD models and standard calibration objects.

| S-EPMC6258044 | biostudies-literature

Syringe pump extruder and curing system for 3D printing of photopolymers.

Project description:Development of new additive manufacturing materials often requires the production of several batches of relatively large volumes in order to print and test objects. This can be difficult for many materials that are expensive or difficult to produce in large volumes on the laboratory scale. Bioprinter systems are advantageous in this regard, however, commercial systems are expensive or do not have the ability to use photopolymers. Herein, we outline a Syringe Pump Extruder and Curing System (SPECS) modification for inexpensive filament-based 3D printers which enables the use of standard bioplotter materials and photopolymers. The system is capable of using multiple syringe volumes and needle sizes that can be quickly and easily exchanged. The SPECS modification is demonstrated using a Prusa i3 mk3 fused filament fabrication printer to print several 3D objects and films using stereolithography (SLA) photopolymer resin. Geometric accuracy in the X, Y, and Z directions was ±0.1 mm using a 5 ml syringe, 22-gauge needle, and commercial SLA resin. The SPECS system could be of great benefit for laboratories pursing material development in the area of additive manufacturing.

| S-EPMC9041271 | biostudies-literature

Principles of open source bioinstrumentation applied to the poseidon syringe pump system.

Project description:The poseidon syringe pump and microscope system is an open source alternative to commercial systems. It costs less than $400 and can be assembled in under an hour using the instructions and source files available at https://pachterlab.github.io/poseidon . We describe the poseidon system and use it to illustrate design principles that can facilitate the adoption and development of open source bioinstruments. The principles are functionality, robustness, safety, simplicity, modularity, benchmarking, and documentation.

| S-EPMC6711986 | biostudies-literature

Repurposed 3D Printer Allows Economical and Programmable Fraction Collection for Proteomics of Nanogram Scale Samples.

Project description:In this work, we describe the construction and application of a repurposed 3D-printer as a fraction collector. We utilize a nano-LC to ensure minimal volumes and surfaces although any LC can be coupled. The setup operates as a high-pH fractionation system capable of effectively working with nanogram scales of lysate digests. The 2D RP-RP system demonstrated superior proteome coverage over single-shot data-dependent acquisition (DDA) analysis using only 5 ng of human cell lysate digest with performance increasing with increasing amounts of material. We found that the fractionation system allowed over 60% signal recovery at the peptide level and, more importantly, we observed improved protein level intensity coverage, which indicates the complexity reduction afforded by the system outweighs the sample losses endured. The application of data-independent acquisition (DIA) and wide window acquisition (WWA) to fractionated samples allowed nearly 8000 proteins to be identified from 50 ng of the material. The utility of the 2D system was further investigated for phosphoproteomics (>21 000 phosphosites from 50 μg starting material) and pull-down type experiments and showed substantial improvements over single-shot experiments. We show that the 2D RP-RP system is a highly versatile and powerful tool for many proteomics workflows.

| S-EPMC11256012 | biostudies-literature

Repurposed 3D Printer Allows Economical and Programmable Fraction Collection for Proteomics of Nanogram Scale Samples

Project description:In this work we describe the construction and application of a repurposed 3D-printer as a fraction collector. We utilise a nanoLC to ensure minimal volumes and surfaces although any LC can be coupled. The setup operates as a high-pH fractionation system capable of effectively working with nanogram scales of lysate digests. The 2D RP-RP system demonstrated superior proteome coverage over single-shot data-dependent acquisition (DDA) analysis using only 5 ng of human cell lysate digest with performance increasing with increasing amounts of material. We found that the fractionation system allowed over 60% signal recovery at the peptide level and, more importantly, we observed improved protein level intensity coverage which indicates the complexity reduction afforded by the system outweighs the sample losses endured. The application of data-independent acquisition (DIA) and wide window acquisition (WWA) to fractionated samples allowed nearly 8,000 proteins to be identified from 50 ng of material. The utility of the 2D system was further investigated for phosphoproteomics (>21,000 phosphosites from 50 µg starting material) and pull-down type experiments and showed substantial improvements over single-shot experiments. We show that the 2D RP-RP system is highly versatile and powerful tool for many proteomics workflows.

2024-07-12 | PXD051148 | Pride

High-performance polymer 3D printing - Open-source liquid cooled scalable printer design.

Project description:To print high-performance polymers, a stable running printer that can reach high temperatures is needed. There is currently a lack of low-cost solutions that allow manipulation of process parameters and expansion of sensors to monitor the printer as well as the process. This paper presents an open-source hardware upgrade for low-cost 3D printers to enable research on new high-temperature polymers as well as manufacturing from all currently available polymers. The hardware cost less than $1700, including the printer. Open-source firmware by Klipper and Fluidd is used for control. The printer is able to reach 500 °C nozzle, 200 °C heated bed, and 135 °C heated chamber with all electronics inside operating within the recommended temperature range. The presented design produced a CF-PEEK 3DBenchy and a spiral vase with excellent surface quality and no signs of delamination. Test specimens according to ISO527 using PA-CF performed similarly to the datasheet provided by the manufacturer for samples produced in the XY-orientation and outperformed the datasheet by 15 % in the ZX direction. Compared to specimens made on an Original Prusa i3 MK3S, the modified printer produced specimens with 22% higher strength in the YX-direction and 25% in ZX. By continuously monitoring and carefully calibrating both hardware and firmware, the presented design can perform as a research tool in material science and produce large-scale components of high-performance polymers.

| S-EPMC9058719 | biostudies-literature

Development of a programmable magnetic agitation device to maintain colloidal suspension of cells during microfluidic syringe pump perfusion.

Project description:Droplet-based microfluidic devices have been used to achieve homogeneous cell encapsulation, but cells sediment in a solution, leading to heterogeneous products. In this technical note, we describe automated and programmable agitation device to maintain colloidal suspensions of cells. We demonstrate that the agitation device can be interfaced with a syringe pump for microfluidic applications. Agitation profiles of the device were predictable and corresponded to device settings. The device maintains the concentration of cells in an alginate solution over time without implicating cell viability. This device replaces manual agitation, and hence is suitable for applications that require slow perfusion for a longer period of time in a scalable manner.

| S-EPMC9994697 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data