Browse
Submit Data
Databases
API
Help

Dataset Information

15 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Enhancing the potential production of bioethanol with bamboo by γ-valerolactone/water pretreatment.

ABSTRACT: In this study, the effect of the γ-valerolactone (GVL)/H₂O pretreatment system on bamboo (Neosinocalamus affinis) for enzymatic hydrolysis and ethanol fermentation was investigated. The performance characterization of the pretreated bamboo substrates, including the chemical composition, the structural characteristics, and the ability to produce bioethanol, were evaluated. The recovered substrates were enzymatically hydrolyzed for 48 h and then fermented to bioethanol. For the cellulose in the raw bamboo material, the highest cellulose-to-glucose conversion yield (CGCY) was achieved at 140 °C for 2 h with GVL : H₂O = 8 : 2, which was 73.39%, and the cellulose-to-ethanol conversion yield (CECY) was 67.00%. This indicated that 183.5 kg of bioethanol could be produced per ton of bamboo, which was 9.71-folds higher than that directly converted from the untreated raw bamboo powder. Under these conditions, 50.60% of the active lignin can be recovered and be used as a wood-derived feedstock for further high-valued utilization. Meanwhile, the maximum concentration of fermentation inhibitors formed after pretreatment was about 140.9 mmol L^-1, and had weak inhibition to the subsequent reaction. It has been shown that the cellulose could be effectively separated from bamboo and converted into bioethanol through the GVL/H₂O pretreatment system.

SUBMITTER: Zhan Y

PROVIDER: S-EPMC9171899 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Bioethanol production from rice straw by popping pretreatment.

Project description:BackgroundRice straw has considerable potential as a raw material for bioethanol production. Popping pretreatment of rice straw prior to downstream enzymatic hydrolysis and fermentation was found to increase cellulose to glucose conversion efficiency. The aim of this study was to investigate the influence of popping pretreatment and determine the optimal enzyme loading using a surface response design.ResultsThe optimal doses of cellulase and xylanase enzymes were 23 FPU and 62 IU/g biomass, respectively. Using the optimized enzyme condition and popping pretreatment of rice straw (15% substrate loading, w/v), a sugar recovery of 0.567 g/g biomass (glucose; 0.394 g/g) was obtained in 48 h, which was significantly higher than that from untreated rice straw (total sugar recovery; 0.270 g/g biomass). Fermentation of the hydrolyzates by Saccharomyces cerevisiae resulted in 0.172 g ethanol/g biomass after 24 h, equivalent to 80.9% of the maximum theoretical yield (based on the amount of glucose in raw material). Changes in the chemical composition and surface area of rice straw were also investigated before and after popping pretreatment. The results showed little or no difference in chemical composition between the pretreated rice straw and the control. However, the surface area of pretreated rice straw increased twofold compared to the control.ConclusionPopping pretreatment of rice straw can effectively improve downstream saccharification and fermentation, important for bioethanol production.

| S-EPMC4176758 | biostudies-literature

Solubility of Organosolv Lignin in γ-Valerolactone/Water Binary Mixtures.

Project description:The solubility of lignin in a mixture of γ-valerolactone (GVL) and water at different weight ratios was measured using the Hildebrand solubility parameters. Based on the molecular structure of lignin, its solubility parameter (δ-value) was calculated as 25.5 MPa1/2 . The δ-value for aqueous GVL solvent increased from 23.1 MPa1/2 for pure GVL to 45.6 MPa1/2 for pure water. Therefore, the lignin solubility was predicted to increase with increasing GVL concentration in the aqueous mixture up to approximately 92-96 wt % of GVL. A ternary diagram describing the phase behavior of water-GVL-lignin mixtures at room temperature was constructed based on the experimental results. The three-component system exhibited a complex behavior with a liquid-liquid and solid-liquid-liquid phase split. The efficiency of the selected fractionation trials in a previous work was validated using the ternary solubility diagram. A promising recovery pathway and lignin isolation method were deduced from the results of this work.

| S-EPMC6586022 | biostudies-literature

Acet-oxy-γ-valerolactone.

Project description:Levulinyl cellulose esters have been produced as an effective renewable binder for architectural coatings. The title compound, C7H10O4 (systematic name: 2-methyl-5-oxo-tetra-hydro-furan-2-yl acetate), assigned as the esterifying species, was isolated and crystallized to confirm the structure. In the crystal, the mol-ecules pack in layers parallel to (102) utilizing weak C-H⋯O inter-actions.

| S-EPMC3685093 | biostudies-literature

Genome sequencing of gut symbiotic Bacillus velezensis LC1 for bioethanol production from bamboo shoots.

Project description:Background:Bamboo, a lignocellulosic feedstock, is considered as a potentially excellent raw material and evaluated for lignocellulose degradation and bioethanol production, with a focus on using physical and chemical pre-treatment. However, studies reporting the biodegradation of bamboo lignocellulose using microbes such as bacteria and fungi are scarce. Results:In the present study, Bacillus velezensis LC1 was isolated from Cyrtotrachelus buqueti, in which the symbiotic bacteria exhibited lignocellulose degradation ability and cellulase activities. We performed genome sequencing of B. velezensis LC1, which has a 3929,782-bp ring chromosome and 46.5% GC content. The total gene length was 3,502,596 bp using gene prediction, and the GC contents were 47.29% and 40.04% in the gene and intergene regions, respectively. The genome contains 4018 coding DNA sequences, and all have been assigned predicted functions. Carbohydrate-active enzyme annotation identified 136 genes annotated to CAZy families, including GH, GTs, CEs, PLs, AAs and CBMs. Genes involved in lignocellulose degradation were identified. After a 6-day treatment, the bamboo shoot cellulose degradation efficiency reached 39.32%, and the hydrolysate was subjected to ethanol fermentation with Saccharomyces cerevisiae and Escherichia coli KO11, yielding 7.2 g/L of ethanol at 96 h. Conclusions:These findings provide an insight for B. velezensis strains in converting lignocellulose into ethanol. B. velezensis LC1, a symbiotic bacteria, can potentially degrade bamboo lignocellulose components and further transformation to ethanol, and expand the bamboo lignocellulosic bioethanol production.

| S-EPMC7048129 | biostudies-literature

The optimized CO2-added ammonia explosion pretreatment for bioethanol production from rice straw.

Project description:A CO2-added ammonia explosion pretreatment was performed for bioethanol production from rice straw. The pretreatment conditions, such as ammonia concentration, CO2 loading level, residence time, and temperature were optimized using response surface methodology. The response for optimization was defined as the glucose conversion rate. The optimized pretreatment conditions resulting in maximal glucose yield (93.6 %) were determined as 14.3 % of ammonia concentration, 2.2 MPa of CO2 loading level, 165.1 °C of temperature, and 69.8 min of residence time. Scanning electron microscopy analysis showed that pretreatment of rice straw strongly increased the surface area and pore size, thus increasing enzymatic accessibility for enzymatic saccharification. Finally, an ethanol yield of 97 % was achieved via simultaneous saccharification and fermentation. Thus, the present study suggests that CO2-added ammonia pretreatment is an appropriate process for bioethanol production from rice straw.

| S-EPMC4141972 | biostudies-literature

Efficiency of Catalytic Liquid Hot Water Pretreatment for Conversion of Corn Stover to Bioethanol.

Project description:Lignocellulose is a promising raw material for the production of second-generation biofuels. In this study, the effects of acid-catalyzed liquid hot water (LHW) on pretreatment of corn stover (CS) for subsequent hydrolysis and conversion to ethanol were studied. The effects of reaction temperature, acid concentration, and residence time on glucose yield were evaluated using a response surface methodology. The optimal condition was 162.4 °C for 29.5 min with 0.45% v/v of sulfuric acid, leading to the maximum glucose yield of 91.05% from enzymatic hydrolysis of the cellulose-enriched fraction. Conversion of the solid fraction to ethanol by simultaneous saccharification and fermentation resulted in a theoretical ethanol yield of 93.91% based on digestible glucose. Scanning electron microscopy revealed disruption on the microstructure of the pretreated CS. Increases of crystallinity index and surface area of the pretreated biomass were observed along with alteration in the functional group profiles, as demonstrated by Fourier transform infrared spectroscopy. This work provides an insight into the effects of LHW on the enzymatic susceptibility and modification of the physicochemical properties of CS for further application on bioethanol production in biorefinery.

| S-EPMC7689892 | biostudies-literature

Experimental determination of the effects of pretreatment on selected Nigerian lignocellulosic biomass in bioethanol production.

Project description:In the present study, five lignocellulosic biomass namely, corn cobs (Zea mays), rice husks (Oryza sativa), cassava peels (Manihot esculenta), sugar cane bagasse (Saccharum officinarum), and white yam peels (Dioscorea rotundata) of two mesh sizes of 300 and 425 microns and a combination of some and all of the biomass were pretreated using combined hydrothermal and acid-based, combined hydrothermal and alkali-based and hydrothermal only processes. The raw and pretreated biomass were also characterized by Fourier transform infrared spectroscopy (FT-IR), Brunauer-Emmett-Teller (BET), X-Ray diffraction (XRD), and Scanning electron microscopy (SEM) to determine the effects of the various pretreatments on the biomass being studied. The cellulose values of the raw biomass range from 25.8 wt% for cassava peels biomass to 40.0 wt% for sugar cane bagasse. The values of the cellulose content increased slightly with the pretreatment, ranging from 33.2 to 43.8 wt%. The results of the analysis indicate that the hydrothermal and alkaline-based pretreatment shows more severity on the different biomass being studied as seen from the pore characteristics results of corn cobs + rice husks biomass, which also shows that the combination of feedstocks can effectively improve the properties of the biomass in the bioethanol production process. The FTIR analysis also showed that the crystalline cellulose present in all the biomass was converted to the amorphous form after the pretreatment processes. The pore characteristics for mixed corn cobs and rice husks biomass have the highest specific surface area and pore volume of 1837 m2/g and 0.5570 cc/g respectively.

| S-EPMC7804122 | biostudies-literature

Improved physicochemical pretreatment and enzymatic hydrolysis of rice straw for bioethanol production by yeast fermentation.

Project description:Lignocellulosic biomass such as agricultural and forest residues are considered as an alternative, inexpensive, renewable, and abundant source for fuel ethanol production. In the present study, three different pretreatment methods for rice straw were carried out to investigate the maximum lignin removal for subsequent bioethanol fermentation. The chemical pretreatments of rice straw were optimized under different pretreatment severity conditions in the range of 1.79-2.26. Steam explosion of rice straw at 170 °C for 10 min, sequentially treated with 2% (w/v) KOH (SEKOH) in autoclave at 121 °C for 30 min, resulted in 85 ± 2% delignification with minimum sugar loss. Combined pretreatment of steam explosion and KOH at severity factor (SF 3.10) showed improved cellulose fraction of biomass. Furthermore, enzymatic hydrolysis at 30 FPU/g enzyme loading resulted in 664.0 ± 5.39 mg/g sugar yield with 82.60 ± 1.7% saccharification efficiency. Consequently, the hydrolysate of SEKOH with 58.70 ± 1.52 g/L sugars when fermented with Saccharomyces cerevisiae OBC14 showed 26.12 ± 1.24 g/L ethanol, 0.44 g/g ethanol yield with 87.03 ± 1.6% fermentation efficiency.

| S-EPMC5605473 | biostudies-literature

Revealing Structural Modifications of Lignin in Acidic ?-Valerolactone-H2O Pretreatment.

Project description:?-valerolactone (GVL)/H2O/acid solvent mixtures has been used in chemical pretreatment of lignocellulosic biomass, it was claimed that GVL lignins were structurally close to proto (native) lignins, or having low molecular weight with narrow polydispersity, however, the structural changes of GVL lignins have not been investigated. In this study, ?-O-4 (?-aryl ether, GG), ?-5 (phenylcoumaran), and ?-? (resinol) lignin model compounds were treated by an acidic GVL-H2O solvent system, a promising pretreatment of lignocellulose for biomass utilization, to investigate the structural changes possibly related to the lignin involved. NMR characterization of the products isolated from the treated GG indicated that a phenyl dihydrobenzofuran, having typical C-H correlations at ?C/?H 50.74/4.50 and 93.49/4.60 ppm in its HSQC spectrum, was produced from GG. In the pretreatment, the released formaldehyde from GG reacted fast with GG to form a novel 1,3-dioxane intermediate whose characteristic HSQC signals were: ?C/?H 94.15-94.48/4.81-5.18 ppm and 80.82-83.34/4.50-4.94 ppm. The ?-5 model, dihydrodehydrodiconiferyl alcohol, was converted into phenylcoumarone and stilbene having benzaldehyde that resulted from the allyl alcohol side chain. The ?-? model, syringaresinol, was isomerized to form a mixture of syringaresinol, epi-, and dia-syringaresinol although being degraded slightly.

| S-EPMC7023100 | biostudies-literature

Chemical Recovery of ?-Valerolactone/Water Biorefinery.

Project description:We introduce the optimization of the pulping conditions and propose different chemical recovery options for a proven biorefinery concept based on ?-valerolactone (GVL)/water fractionation. The pulping process has been optimized whereby the liquor-to-wood (L:W) ratio could be reduced to 3 L/kg without compromising the pulp properties as raw material for textile fibers production. The recovery of the pulping solvent was performed through combinations of lignin precipitation by water addition, distillation at reduced pressure, and liquid CO2 extraction. With a two-step lignin precipitation coupled with vacuum distillation, more than 90% of lignin and GVL could be recovered from the spent liquor. However, a significant part of GVL remained unrecoverable in the residue, which was a highly viscous liquid with complicated phase behavior. The recovery by lignin precipitation combined with liquid CO2 extraction could recover more than 85% GVL and 90% lignin without forming any problematic residue as in the distillation process. The remaining GVL remained in the raffinate containing a low amount of lignin and other compounds, which can be further processed to isolate the GVL and improve the recovery rate.

| S-EPMC6237546 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data