Dataset Information

Thermal conductivity and thermal diffusivity of fullerene-based nanofluids.

ABSTRACT: Owing to their outstanding characteristics, carbon based nanofluids (CbNFs) have been applied to various advanced heat transfer and cooling technologies. It was claimed that these CbNFs can considerably improve the properties of the base working fluids. Among all the thermal characteristics, the thermal conductivity (λ) is regarded as the primary parameter to be considered for the application of nanofluids (NFs). In the present research study we measured for the first time both λ and thermal diffusivity (a_T) of very stable fullerene (C₆₀)-based NFs in liquid phase (1,2,3,4-tetrahydronaphthalene and 1,2-dicholorobenzene) by the transient multi-current hot wire technique at atmospheric pressure in a wide range of temperature (254-323 K). Similar to the base liquids (BLs), we observed a slight decrease in λ with an increase in temperature. Additionally, compared to the BLs λ was reduced upon the addition of C₆₀. The results were compared with the predicted ones using different theoretical models. Not much variation in a_T was observed between the C₆₀ NFs and the corresponding BLs due partly to the small variation of λ with the addition of C₆₀.

SUBMITTER: Reding B

PROVIDER: S-EPMC9187655 | biostudies-literature | 2022 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Thermal conductivity and thermal diffusivity of fullerene-based nanofluids.

Reding Brian B Khayet Mohamed M

Scientific reports 20220610 1

Owing to their outstanding characteristics, carbon based nanofluids (CbNFs) have been applied to various advanced heat transfer and cooling technologies. It was claimed that these CbNFs can considerably improve the properties of the base working fluids. Among all the thermal characteristics, the thermal conductivity (λ) is regarded as the primary parameter to be considered for the application of nanofluids (NFs). In the present research study we measured for the first time both λ and thermal dif ...[more]

PMID: 35689018

Similar Datasets

Project description:Developing stable nanofluids and improving their thermo-physical properties are highly important in heat transfer applications. In the present work, the stability, thermal conductivity, and rheological properties of tungsten disulphide (WS2) nanoparticles (NPs) with ethylene glycol (EG) were profoundly examined using a particle size analyzer, zeta-sizer, thermal property analyzer, rheometer, and pH measuring system. WS2 NPs were characterized by various techniques, such as XRD (X-Ray Diffraction), FTIR (Fourier Transform Infrared Spectroscopy), FESEM (Field emission scanning electron microscopy), and high-resolution transmission electron microscopy (HRTEM). The nanofluids were obtained with the two-step method by employing three volume concentrations (0.005%, 0.01%, and 0.02%) of WS2. The influence of different surfactants (Sodium dodecyl sulphate (SDS), Sodium dodecylbenzenesulfonate (SDBS), Cetyltrimethylammonium bromide (CTAB)) with various volume concentrations (0.05-2%) on the measured properties has also been evaluated. Pristine WS2/EG nanofluids exhibit low zeta potential values, i.e., -7.9 mV, -9.3 mV, and -5 mV, corresponding to 0.005%, 0.01%, and 0.02% nanofluid, respectively. However, the zeta potential surpassed the threshold (±30 mV) and the maximum values reached of -52 mV, -45 mV, and 42 mV for SDS, SDBS, and CTAB-containing nanofluids. This showed the successful adsorption of surfactants onto WS2, which was also observed through the increased agglomerate size of up to 1720 nm. Concurrently, particularly for 0.05% SDS with 0.005% WS2, thermal conductivity was enhanced by up to 4.5%, with a corresponding decrease in viscosity of up to 10.5% in a temperature range of (25-70 °C), as compared to EG. Conversely, the viscoelastic analysis has indicated considerable yield stress due to the presence of surfactants, while the pristine nanofluids exhibited enhanced fluidity over the entire tested deformation range. The shear flow behavior showed a transition from a non-Newtonian to a Newtonian fluid at a low shear rate of 10 s-1. Besides this, the temperature sweep analysis has shown a viscosity reduction in a range of temperatures (25-70 °C), with an indication of a critical temperature limit. However, owing to an anomalous reduction in the dynamic viscosity of up to 10.5% and an enhancement in the thermal conductivity of up to 6.9%, WS2/EG nanofluids could be considered as a potential candidate for heat transfer applications.

Dataset Information

Thermal conductivity and thermal diffusivity of fullerene-based nanofluids.

Publications

Thermal conductivity and thermal diffusivity of fullerene-based nanofluids.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets