Browse
Submit Data
Databases
API
Help

Dataset Information

11 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Cheap and Sustainable Biosensor Fabrication by Enzyme Immobilization in Commercial Polyacrylic Acid/Carbon Nanotube Films.

ABSTRACT: Novel glucose biosensors were constructed by loading glucose oxidase (GOx) into the nanopores of homogenous carbon nanotube (CNT) films on the surface of Pt disk electrodes and trapping the enzyme by subsequent deposition of polyacrylic acid (PAA), forming PAA/GOx-CNT-modified Pt disks. In amperometric biosensing with anodic hydrogen peroxide (H₂O₂) detection at a potential of +600 mV, increasing electrolyte glucose concentrations produced instantaneous steps in the H₂O₂ oxidation current. Glucose biosensor amperometry was feasible down to 10 μM, with a sensitivity of about 34 μA mM^-1 cm^-2 and linear current response up to 5 mM. The biosensors reliably determined glucose concentrations in human serum and a beverage. Successful trials with PAA/GOx-CNT-modified screen-printed Pt electrode disks demonstrated the potential of this means of enzyme fixation in biosensor mass fabrication, which offers a unique combination of cheap availability of the two matrix constituents and sensor layer formation through simple drop-and-dry steps. PAA/GOx-CNT/Pt biosensors are green and user-friendly bioanalytical tools that do not need large budgets, special skills, or laboratory amenities for their production. Any user, from industrial, university, or school laboratories, even if inexperienced in biosensor construction, can prepare functional biosensors with GOx, as in these proof-of-principle studies, or with other redox enzymes, for clinical, environmental, pharmaceutical, or food sample analysis.

SUBMITTER: Sakdaphetsiri K

PROVIDER: S-EPMC9202243 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Antistaphylococcal nanocomposite films based on enzyme-nanotube conjugates.

Project description:Infection with antibiotic-resistant pathogens such as methicillin-resistant Staphylococcus aureus (MRSA) is one of the primary causes of hospitalizations and deaths. To address this issue, we have designed antimicrobial coatings incorporating carbon nanotube-enzyme conjugates that are highly effective against antibiotic-resistant pathogens. Specifically, we incorporated conjugates of carbon nanotubes with lysostaphin, a cell wall degrading enzyme, into films to impart bactericidal properties against Staphylococcus aureus and Staphylococcus epidermidis. We fabricated and characterized nanocomposites containing different conjugate formulations and enzyme loadings. These enzyme-based composites were highly efficient in killing MRSA (>99% within 2 h) without release of the enzyme into solution. Additionally, these films were reusable and stable under dry storage conditions for a month. Such enzyme-based film formulations may be used to prevent growth of pathogenic and antibiotic-resistant microorganisms on various common surfaces in hospital settings. Polymer and paint films containing such antimicrobial conjugates, in particular, could be advantageous to prevent risk of staphylococcal-specific infection and biofouling.

| S-EPMC2919614 | biostudies-literature

Sustainable Electropolymerization of Zingerone and Its C2 Symmetric Dimer for Amperometric Biosensor Films.

Project description:Polymeric permselective films are frequently used for amperometric biosensors to prevent electroactive interference present in the target matrix. Phenylenediamines are the most commonly used for the deposition of shielding polymeric films against interfering species; however, even phenolic monomers have been utilized in the creation of these films for microsensors and biosensors. The purpose of this paper is to evaluate the performances of electrosynthesized polymers, layered by means of constant potential amperometry (CPA), of naturally occurring compound zingerone (ZING) and its dimer dehydrozingerone (ZING DIM), which was obtained by straight oxidative coupling reaction. The polymers showed interesting shielding characteristics against the main interfering species, such as ascorbic acid (AA): actually, polyZING exhibited an AA shielding aptitude comprised between 77.6 and 99.6%, comparable to that obtained with PPD. Moreover, a marked capability of increased monitoring of hydrogen peroxide (HP), when data were compared with bare metal results, was observed. In particular, polyZING showed increases ranging between 55.6 and 85.6%. In the present work, the molecular structures of the obtained polymers have been theorized and docking analyses were performed to understand their peculiar characteristics better. The structures were docked using the Lamarckian genetic algorithm (LGA). Glutamate biosensors based on those polymers were built, and their performances were compared with biosensors based on PPD, which is the most widespread polymer for the construction of amperometric biosensors.

| S-EPMC10459948 | biostudies-literature

Facile Fabrication of Durable Superhydrophobic Films from Carbon Nanotube/Main-Chain Type Polybenzoxazine Composites.

Project description:Superhydrophobic materials have immense applications in the fields of industry and research. However, their durability is still a cause for concern. A facile method for preparing durable superhydrophobic films from carbon nanotubes (CNTs) and the main-chain type polybenzoxazine precursors is reported herein. We used probe ultrasonicator to prepare CNT/polybenzoxazine coatings. Compared with the general sonicating dispersion process, the dispersion time was greatly reduced from a few hours to 5 minutes and the prepared suspension exhibited film-forming characteristics well. The CNT/polybenzoxazine films, which do not contain any fluorinated compounds, exhibit remarkable durability against thermal treatment, organic solvents, corrosive liquids, and sandpaper abrasion, while retaining their superhydrophobicity. Furthermore, these CNT/polybenzoxazine films also showed durable superhydrophobicity after ultraviolet (UV) irradiation for 100 h. This CNT/polybenzoxazine film can be readily used for practical applications to make durable superhydrophobic coatings.

| S-EPMC6680462 | biostudies-literature

Immobilization of myoglobin on Au nanoparticle-decorated carbon nanotube/polytyramine composite as a mediator-free H2O2 and nitrite biosensor.

Project description:A novel composite film was designed for use as a highly selective mediator-free amperometric biosensor, and a method was created for accomplishing direct electrochemistry of myoglobin on a multi-walled carbon nanotube and tyramine-modified composite decorated with Au nanoparticles on a glassy carbon electrode. The ultraviolet-visible and electrochemical impedance spectroscopy results showed that myoglobin retained its native conformation in the interaction with Au-PTy-f-MWCNT. The surface coverage of Mb-heme-Fe((II)/(III)) immobilized on Au-PTy-f-MWCNT and the heterogeneous electron-transfer rate constant were 2.12 × 10(-9) mol cm(-2) and 4.86 s(-1), respectively, indicating a higher loading capacity of the nanocomposite for direct electron transfer of Mb onto the electrode surface. The proposed Mb/Au-PTy-f-MWCNT biofilm exhibited excellent electrocatalytic behavior toward the reduction of H2O2 and the oxidation of nitrite with linear ranges of 2 to 5000 μM and 1 to 8000 μM and lower detection limits of 0.01 μM and 0.002 μM, respectively. An apparent Michaelis-Menten constant of 0.12 mM indicated that the Mb immobilized on the Au-PTy-f-MWCNT film retained its native activity. This biosensor can be successfully applied to detect H2O2 and nitrite in disinfectant cream, eye drops, pickle juice, and milk samples.

| S-EPMC4682093 | biostudies-literature

Micromask Lithography for Cheap and Fast 2D Materials Microstructures Fabrication.

Project description:The fast and precise fabrication of micro-devices based on single flakes of novel 2D materials and stacked heterostructures is vital for exploration of novel functionalities. In this paper, we demonstrate a fast high-resolution contact mask lithography through a simple upgrade of metallographic optical microscope. Suggested kit for the micromask lithography is compact and easily compatible with a glove box, thus being suitable for a wide range of air-unstable materials. The shadow masks could be either ordered commercially or fabricated in a laboratory using a beam lithography. The processes of the mask alignment and the resist exposure take a few minutes and provide a micrometer resolution. With the total price of the kit components around USD 200, our approach would be convenient for laboratories with the limited access to commercial lithographic systems.

| S-EPMC8397995 | biostudies-literature

Carbon Nanotube and Cellulose Nanocrystal Hybrid Films.

Project description:The use of cellulose nanocrystals (CNC) in high performance coatings is attractive for micro-scale structures or device fabrication due to the anisotropic geometry, however CNC are insulating materials. Carbon nanotubes (CNT) are also rod-shaped nanomaterials that display high mechanical strength and electrical conductivity. The hydrophobic regions of surface-modified CNC can interact with hydrophobic CNT and aid in association between the two anisotropic nanomaterials. The long-range electrostatic repulsion of CNC plays a role in forming a stable CNT and CNC mixture dispersion in water, which is integral to forming a uniform hybrid film. At concentrations favorable for film formation, the multiwalled nanotubes + CNC mixture dispersion shows cellular network formation, indicating local phase separation, while the single-walled nanotube + CNC mixture dispersion shows schlieren texture, indicating liquid crystal mixture formation. Conductive CNT + CNC hybrid films (5-20 μm thick) were cast on glass microscope slides with and without shear by blade coating. The CNT + CNC hybrid films electrical conductivity increased with increasing CNT loadings and some anisotropy was observed with the sheared hybrid films, although to a lesser extent than what was anticipated. Percolation models were applied to model the hybrid film conductivity and correlate with the hybrid film microstructure.

| S-EPMC6681000 | biostudies-literature

3D Conformal Fabrication of Piezoceramic Films.

Project description:Piezoceramic films are an essential class of energy-conversion materials that have been widely used in the electronics industry. Although current methods create a great freedom for fabricating high-quality piezoceramic films, it requires well-controlled synthesis conditions, including special high-cost equipment and planar substrates particularly. The limited substrate selections hinder the applications of piezoceramic films in 3D conformal structures where most objects possess complex curvilinear surfaces. To overcome such limitations, a fast, energy-efficient, and cost-effective approach, named flame treated spray (FTS) coating, is developed for preparing piezoceramic films on free-form surfaces. The flame treatment significantly enhances the hydrophilicity of a substrate, assisting in forming a uniform and continuous thin film. The followed spray coating deposits hundreds of nanometers to several micrometers thick films on 3D free-form surfaces. Given the size controllability and arbitrary surface compatibility of the FTS method, a highly conformal piezoelectric tactile sensor array (4 × 4) is assembled on a spherical surface for mimicking robot fingers and an on-site thin-film sensor on the wing of an aircraft model to monitor the vibration in real-time during flight. The FTS film deposition offers a highly promising methodology for the application of functional thin-film from micro- to marcoscale devices, regardless of conformal problems.

| S-EPMC9218746 | biostudies-literature

Tunable Polymeric Scaffolds for Enzyme Immobilization.

Project description:The number of methodologies for the immobilization of enzymes using polymeric supports is continuously growing due to the developments in the fields of biotechnology, polymer chemistry, and nanotechnology in the last years. Despite being excellent catalysts, enzymes are very sensitive molecules and can undergo denaturation beyond their natural environment. For overcoming this issue, polymer chemistry offers a wealth of opportunities for the successful combination of enzymes with versatile natural or synthetic polymers. The fabrication of functional, stable, and robust biocatalytic hybrid materials (nanoparticles, capsules, hydrogels, or films) has been proven advantageous for several applications such as biomedicine, organic synthesis, biosensing, and bioremediation. In this review, supported with recent examples of enzyme-protein hybrids, we provide an overview of the methods used to combine both macromolecules, as well as the future directions and the main challenges that are currently being tackled in this field.

| S-EPMC7406678 | biostudies-literature

Peptide-modified surfaces for enzyme immobilization.

Project description:BackgroundChemistry and particularly enzymology at surfaces is a topic of rapidly growing interest, both in terms of its role in biological systems and its application in biocatalysis. Existing protein immobilization approaches, including noncovalent or covalent attachments to solid supports, have difficulties in controlling protein orientation, reducing nonspecific absorption and preventing protein denaturation. New strategies for enzyme immobilization are needed that allow the precise control over orientation and position and thereby provide optimized activity.Methodology/principal findingsA method is presented for utilizing peptide ligands to immobilize enzymes on surfaces with improved enzyme activity and stability. The appropriate peptide ligands have been rapidly selected from high-density arrays and when desirable, the peptide sequences were further optimized by single-point variant screening to enhance both the affinity and activity of the bound enzyme. For proof of concept, the peptides that bound to ?-galactosidase and optimized its activity were covalently attached to surfaces for the purpose of capturing target enzymes. Compared to conventional methods, enzymes immobilized on peptide-modified surfaces exhibited higher specific activity and stability, as well as controlled protein orientation.Conclusions/significanceA simple method for immobilizing enzymes through specific interactions with peptides anchored on surfaces has been developed. This approach will be applicable to the immobilization of a wide variety of enzymes on surfaces with optimized orientation, location and performance, and provides a potential mechanism for the patterned self-assembly of multiple enzymes on surfaces.

| S-EPMC3073003 | biostudies-literature

Enzyme Engineering for In Situ Immobilization.

Project description:Enzymes are used as biocatalysts in a vast range of industrial applications. Immobilization of enzymes to solid supports or their self-assembly into insoluble particles enhances their applicability by strongly improving properties such as stability in changing environments, re-usability and applicability in continuous biocatalytic processes. The possibility of co-immobilizing various functionally related enzymes involved in multistep synthesis, conversion or degradation reactions enables the design of multifunctional biocatalyst with enhanced performance compared to their soluble counterparts. This review provides a brief overview of up-to-date in vitro immobilization strategies while focusing on recent advances in enzyme engineering towards in situ self-assembly into insoluble particles. In situ self-assembly approaches include the bioengineering of bacteria to abundantly form enzymatically active inclusion bodies such as enzyme inclusions or enzyme-coated polyhydroxyalkanoate granules. These one-step production strategies for immobilized enzymes avoid prefabrication of the carrier as well as chemical cross-linking or attachment to a support material while the controlled oriented display strongly enhances the fraction of accessible catalytic sites and hence functional enzymes.

| S-EPMC6273058 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data