Browse
Submit Data
Databases
API
Help

Dataset Information

40 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Nickel nanoparticle-activated MoS₂ for efficient visible light photocatalytic hydrogen evolution.

ABSTRACT: Direct sunlight-induced water splitting for photocatalytic hydrogen evolution is the dream for an ultimate clean energy source. So far, typical photocatalysts require complicated synthetic processes and barely work without additives or electrolytes. Here, we report the realization of a hydrogen evolution strategy with a novel Ni-Ag-MoS₂ ternary nanocatalyst under visible/sun light. Synthesized through an ultrasound-assisted wet method, the composite exhibits stable catalytic activity for long-term hydrogen production from both pure and natural water. A high efficiency of 73 μmol g^-1 W^-1 h^-1 is achieved with only a visible light source and the (MoS₂)₈₄Ag₁₀Ni₆ catalyst, matching the values of present additive-enriched photocatalysts. Verified by experimental characterizations and first-principles calculations, the enhanced photocatalytic ability is attributed to effective charge migration through the dangling bonds at the Ni-Ag-MoS₂ alloy interface and the activation of the MoS₂ basal planes.

SUBMITTER: Shi X

PROVIDER: S-EPMC9219418 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Pt-Chitosan-TiO2 for Efficient Photocatalytic Hydrogen Evolution via Ligand-to-Metal Charge Transfer Mechanism under Visible Light.

Project description:The Pt-chitosan-TiO2 charge transfer (CT) complex was synthesized via the sol-gel and impregnation method. The synthesized photocatalysts were thoroughly characterized, and their photocatalytic activity were evaluated toward H2 production through water reduction under visible-light irradiation. The effect of the preparation conditions of the photocatalysts (the degree of deacetylation of chitosan, addition amount of chitosan, and calcination temperature) on the photocatalytic activity was discussed. The optimal Pt-10%DD75-T200 showed a H2 generation rate of 280.4 μmol within 3 h. The remarkable visible-light photocatalytic activity of Pt-chitosan-TiO2 was due to the CT complex formation between chitosan and TiO2, which extended the visible-light absorption and induced the ligand-to-metal charge transfer (LMCT). The photocatalytic mechanism of Pt-chitosan-TiO2 was also investigated. This paper outlines a new and facile pathway for designing novel visible-light-driven photocatalysts that are based on TiO2 modified by polysaccharide biomass wastes that are widely found in nature.

| S-EPMC9330878 | biostudies-literature

CdSe nanorod/TiO2 nanoparticle heterojunctions with enhanced solar- and visible-light photocatalytic activity.

Project description:CdSe nanorods (NRs) with an average length of ≈120 nm were prepared by a solvothermal process and associated to TiO2 nanoparticles (Aeroxide® P25) by annealing at 300 °C for 1 h. The content of CdSe NRs in CdSe/TiO2 composites was varied from 0.5 to 5 wt %. The CdSe/TiO2 heterostructured materials were characterized by XRD, TEM, SEM, XPS, UV-visible spectroscopy and Raman spectroscopy. TEM images and XRD patterns show that CdSe NRs with wurtzite structure are associated to TiO2 particles. The UV-visible spectra demonstrate that the narrow bandgap of CdSe NRs serves to increase the photoresponse of CdSe/TiO2 composites until ≈725 nm. The CdSe (2 wt %)/TiO2 composite exhibits the highest photocatalytic activity for the degradation of rhodamine B in aqueous solution under simulated sunlight or visible light irradiation. The enhancement in photocatalytic activity likely originates from CdSe sensitization of TiO2 and the heterojunction between these materials which facilitates electron transfer from CdSe to TiO2. Due to its high stability (up to ten reuses without any significant loss in activity), the CdSe/TiO2 heterostructured catalysts show high potential for real water decontamination.

| S-EPMC5753051 | biostudies-literature

High-throughput Production of ZnO-MoS2-Graphene Heterostructures for Highly Efficient Photocatalytic Hydrogen Evolution.

Project description:High-throughput production of highly efficient photocatalysts for hydrogen evolution remains a considerable challenge for materials scientists. Here, we produced extremely uniform high-quality graphene and molybdenum disulfide (MoS2) nanoplatelets through the electrochemical-assisted liquid-phase exfoliation, out of which we subsequently fabricated MoS2/graphene van der Waals heterostructures. Ultimately, zinc oxide (ZnO) nanoparticles were deposited into these two-dimensional heterostructures to produce an artificial ZnO/MoS2/graphene nanocomposite. This new composite experimentally exhibited an excellent photocatalytic efficiency in hydrogen evolution under the sunlight illumination ( λ > 400   n m ), owing to the extremely high electron mobilities in graphene nanoplatelets and the significant visible-light absorptions of MoS2. Moreover, due to the synergistic effects in MoS2 and graphene, the lifetime of excited carriers increased dramatically, which considerably improved the photocatalytic efficiency of the ZnO/MoS2/graphene heterostructure. We conclude that the novel artificial heterostructure presented here shows great potential for the high-efficient photocatalytic hydrogen generation and the high throughput production of visible-light photocatalysts for industrial applications.

| S-EPMC6678946 | biostudies-literature

Bio-inspired Z-scheme g-C3N4/Ag2CrO4 for efficient visible-light photocatalytic hydrogen generation.

Project description:Due to low charge separation efficiency and poor stability, it is usually difficult for single-component photocatalysts such as graphitic carbon nitride (g-C3N4) and silver chromate (Ag2CrO4) to fulfill photocatalytic hydrogen production efficiently. Z-scheme charge transport mechanism that mimics the photosynthesis in nature is an effective way to solve the above problems. Inspired by photosynthesis, we report Ag2CrO4 nanoparticles-decorated g-C3N4 nanosheet as an efficient photocatalyst for hydrogen evolution reaction (HER) with methanol as sacrificial agent. The formation of Z-scheme g-C3N4/Ag2CrO4 nanosheets photocatalysts could inhibit the recombination of photogenerated electron-hole pairs, promote the generation of hydrogen by photosplitting of water. The experiment results indicate that g-C3N4/Ag2CrO4 nanocomposites present enhanced photocatalytic activity and stability in the H2 evolution of water splitting. And the nanocomposites g-C3N4/Ag2CrO4(23.1%) show the 14 times HER efficiency compared to that of bare g-C3N4.

| S-EPMC6220202 | biostudies-literature

Metal-Organic Framework-Derived ZnO/ZnS Heteronanostructures for Efficient Visible-Light-Driven Photocatalytic Hydrogen Production.

Project description:Developing highly active, recyclable, and inexpensive photocatalysts for hydrogen evolution reaction (HER) under visible light is significant for the direct conversion of solar energy into chemical fuels for various green energy applications. For such applications, it is very challenging but vitally important for a photocatalyst to simultaneously enhance the visible-light absorption and suppress photogenerated electron-hole recombination, while also to maintain high stability and recyclability. Herein, a metal-organic framework (MOF)-templated strategy has been developed to prepare heterostructured nanocatalysts with superior photocatalytic HER activity. Very uniquely, the synthesized photocatalytic materials can be recycled easily after use to restore the initial photocatalytic activity. It is shown that by controlling the calcination temperature and time with MOF-5 as a host and guest thioacetamide as a sulfur source, the chemical compositions of the formed heterojunctions of ZnO/ZnS can be tuned to further enhance the visible-light absorption and photocatalytic activity. The nanoscale heterojunction ZnO/ZnS structural feature serves to reduce the average free path of charge carriers and improve the charge separation efficiency, thus leading to significantly enhanced HER activity under visible-light irradiation (? > 420 nm) with high stability and recyclability without any cocatalyst.

| S-EPMC5908348 | biostudies-literature

Visible-Light-Active Black TiO2 Nanoparticles with Efficient Photocatalytic Performance for Degradation of Pharmaceuticals.

Project description:Special attention has recently been paid to surface-defective titanium dioxide and black TiO2 with advanced optical, electrical, and photocatalytic properties. Synthesis of these materials for photodegradation and mineralization of persistent organic pollutants in water, especially under visible radiation, presents interest from scientific and application points of view. Chemical reduction by heating a TiO2 and NaBH4 mixture at 350 °C successfully introduced Ti3+ defects and oxygen vacancies at the surface of TiO2, with an increase in the photocatalytic degradation of amoxicillin-an antibiotic that is present in wastewater due to its intense use in human and animal medicine. Three TiO2 samples were prepared at different annealing temperatures to control the ratio between anatase and rutile and were subjected to chemical reduction. Electron paramagnetic resonance investigations showed that the formation of surface Ti3+ defects in a high concentration occurred mainly in the anatase sample annealed at 400 °C, contributing to the bandgap reduction from 3.32 eV to 2.92 eV. The reduced band gap enhances visible light absorption and the efficiency of photocatalysis. The nanoparticles of ~90 m2/g specific surface area and 12 nm average size exhibit ~100% efficiency in the degradation of amoxicillin under simulated solar irradiation compared with pristine TiO2. Mineralization of amoxicillin and by-products was over 75% after 48 h irradiation for the anatase sample, where the Ti3+ defects were present in a higher concentration at the catalyst's surface.

| S-EPMC9330099 | biostudies-literature

Enhanced Photocatalytic Activity of Nanoparticle-Aggregated Ag-AgX(X = Cl, Br)@TiO2 Microspheres Under Visible Light.

Project description:Ag-AgX(X = Cl, Br)@TiO2 nanoparticle-aggregated spheres with different mass ratio of R = TiO2/Ag(X) from 35:1 to 5:1 were synthesized by a facile sol-gel technique with post-photoreduction. The photocatalytic activities of both Ag-AgCl@TiO2 and Ag-AgBr@TiO2 under visible light are effectively improved by ~3 times relative to TiO2 NPAS under the simulated sunlight for the decomposition of methyl orange (MO). Ag-AgBr@TiO2 showed 30% improvement and less stable in photocatalytic activity than that of AgCl@TiO2. The role of Ag and AgX nanoparticles on the surface of Ag-AgX(X = Cl, Br)@TiO2 was discussed. Ag on these samples not only can efficiently harvest visible light especially for AgCl, but also efficiently separate excited electrons and holes via the fast electron transfer from AgX(X = Cl, Br) to metal Ag nanoparticles and then to TiO2-aggregated spheres on the surface of heterostructure. On the basis of their efficient and stable photocatalytic activities under visible-light irradiation, these photocatalysts could be widely used for degradation of organic pollutants in aqueous solution.

| S-EPMC6199042 | biostudies-literature

Efficient Charge Transfer in Heterostructures of CdS/NaTaO3 with Improved Visible-Light-Driven Photocatalytic Activity.

Project description:Photocatalyst NaTaO3 with a cube-shaped morphology and an average particle size of 100 nm was synthesized using an effortless hydrothermal method. The composite heterostructures of CdS/NaTaO3 with variable concentrations of CdS were fabricated after the surface functionalization of bare NaTaO3 using 3-mercaptopropionic acid. As-synthesized photocatalysts were characterized using powder X-ray diffraction analysis, Raman spectroscopy, field-emission scanning and transmission electron microscopies with energy-dispersive X-ray spectroscopy furnished with elemental mapping, multipoint Brunauer-Emmett-Teller (BET), and UV-vis diffuse reflectance spectroscopy. Average lifetime (τavg) of photoexcitons in heterostructures was studied using photoluminescence (PL) empowered with the time-correlated single-photon counting technique. The diminishing PL peak intensity and reduced average lifetime (τavg) of photoexcitons in heterostructures indicate the inhibition of photoexciton recombination along with efficient photoexciton exchange between heterostructures. As-synthesized heterostructures demonstrate enhanced visible-light harvesting and appreciably increased the photocatalytic performance toward the degradation of dye rhodamine B. This work highlights the importance of heterostructures with new archetypes which may provide a lead to develop highly capable and reusable photocatalysts to organic dye degradation.

| S-EPMC6682145 | biostudies-literature

Micro and nano hierachical structures of BiOI/activated carbon for efficient visible-light-photocatalytic reactions.

Project description:Constructing the heterojunctions or designing the novel nanostructures are thought as effective methods to improve photocatalytic activities of semiconductors. Herein, a one-step green route was developed to fabricate bismuth oxyiodide/activated carbon (BiOI/C) composite. The prepared BiOI/C exhibit obviously red shifts and increased absorption range of visible light. The presence of Bi-C bonds confirms the heterojunction, on account of which the BiOI nanosheets tightly grew on the surface of carbon and subsequently provided the hierarchical structure, sufficient interfacial interaction and high specific surface area. Significantly, the sufficient interracial interaction is beneficial to the detachment of electrons (e-)-holes (h+) pairs and the Bi-C bonds work like a bridge to rapidly transmit the e- from BiOI to carbon. What's more, the hierarchical structure of BiOI/C efficiently shortened the diffusion pathways of pollutants and the high SBET provided more exposed reaction sites. Benefiting from multiple synergistic effects, the as-prepared BiOI/C exhibited enhanced photocatalytic activities in degrading Rhodamine B (RhB) solution under visible light irradiation. The degradation rate of optimized BiOI/C reaches up to 95% in 120?min, and the efficiency is 3.36 times higher than pure BiOI. This study provides a promising strategy that activated carbon can be utilized in highly-efficiency photocatalysts.

| S-EPMC5601909 | biostudies-other

Boundary activated hydrogen evolution reaction on monolayer MoS2.

Project description:Recently, monolayer molybdenum disulphide (MoS2) has emerged as a promising and non-precious electrocatalyst for hydrogen evolution reaction. However, its performance is largely limited by the low density and poor reactivity of active sites within its basal plane. Here, we report that domain boundaries in the basal plane of monolayer MoS2 can greatly enhance its hydrogen evolution reaction performance by serving as active sites. Two types of effective domain boundaries, the 2H-2H domain boundaries and the 2H-1T phase boundaries, were investigated. Superior hydrogen evolution reaction catalytic activity, long-term stability and universality in both acidic and alkaline conditions were achieved based on a multi-hierarchy design of these two types of domain boundaries. We further demonstrate that such superior catalysts are feasible at a large scale by applying this multi-hierarchy design of domain boundaries to wafer-scale monolayer MoS2 films.

| S-EPMC6430794 | biostudies-literature