Browse
Submit Data
Databases
API
Help

Dataset Information

28 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Pt-Chitosan-TiO₂ for Efficient Photocatalytic Hydrogen Evolution via Ligand-to-Metal Charge Transfer Mechanism under Visible Light.

ABSTRACT: The Pt-chitosan-TiO₂ charge transfer (CT) complex was synthesized via the sol-gel and impregnation method. The synthesized photocatalysts were thoroughly characterized, and their photocatalytic activity were evaluated toward H₂ production through water reduction under visible-light irradiation. The effect of the preparation conditions of the photocatalysts (the degree of deacetylation of chitosan, addition amount of chitosan, and calcination temperature) on the photocatalytic activity was discussed. The optimal Pt-10%DD75-T200 showed a H₂ generation rate of 280.4 μmol within 3 h. The remarkable visible-light photocatalytic activity of Pt-chitosan-TiO₂ was due to the CT complex formation between chitosan and TiO₂, which extended the visible-light absorption and induced the ligand-to-metal charge transfer (LMCT). The photocatalytic mechanism of Pt-chitosan-TiO₂ was also investigated. This paper outlines a new and facile pathway for designing novel visible-light-driven photocatalysts that are based on TiO₂ modified by polysaccharide biomass wastes that are widely found in nature.

SUBMITTER: Liu Y

PROVIDER: S-EPMC9330878 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Enhanced Photocatalytic Hydrogen Evolution from Transition-Metal Surface-Modified TiO2.

Project description:This study describes the UV solution photodeposition of several earth-abundant 3d transition metals (Co, Ni, and Cu) onto the surface of nanoparticulate TiO2. Irradiated methanolic metal dichloride solutions with suspended Degussa P25-TiO2 (1-2 wt % metal to TiO2) yield visibly colored titanias, whereas the bulk TiO2 structure is unchanged; X-ray photoelectron spectroscopy confirms that metals are present on the titania surface in either reduced metal (Cu/Cu+) or metal cation states (Co2+ and Ni2+), and UV-vis diffuse reflectance spectroscopy shows new visible absorbance features. The analyzed bulk metal contents (∼0.04-0.6 at. %, highest for copper) are lower than the nominal metal solution content. Mixed-metal solution photodeposition reactions roughly parallel observations for single metals, with copper deposition being most favored. These 3d metal surface-modified titanias show significant (∼5-15×) improvement in UV photocatalytic H2 evolution versus unmodified TiO2. H2 evolution rates as high as 85 μmol/h (8500 μmol h-1 g-1) were detected for Cu-coated TiO2 using continuous monitoring of reactor headspace gases by portable mass spectrometry. Control experiments verify the necessity of the methanol sacrificial oxidant in both metal deposition and H2 evolution. In situ metal surface deposition is quickly followed by enhanced H2 evolution relative to TiO2, but at lower levels than isolated metal surface-modified titanias. The photodeposited 3d metal species on the TiO2 surface likely act to reduce electron-hole recombination by facilitating the transfer of photoinduced TiO2 conduction band electrons to protons in solution that are reduced to H2. This study demonstrates a facile method to modify photoactive TiO2 nanoparticles with inexpensive 3d transition metals to improve photocatalytic hydrogen evolution, and it shows the utility of quantitative real-time gas evolution monitoring by portable mass spectrometry.

| S-EPMC6641314 | biostudies-literature

Pt-Decorated g-C3N4/TiO2 Nanotube Arrays with Enhanced Visible-Light Photocatalytic Activity for H2 Evolution.

Project description:Aligned TiO2 nanotube layers (TiNTs) grown by self-organizing anodization of a Ti-substrate in a fluoride-based electrolyte were decorated with graphitic-phase C3N4 (g-C3N4) via a facile chemical vapor deposition approach. In comparison with classical TiO2 nanotubes (anatase), the g-C3N4/TiNTs show an onset of the photocurrent at 2.4?eV (vs. 3.2?eV for anatase) with a considerably high photocurrent magnitude in the visible range. After further decoration with Pt nanoparticles, we obtained a visible-light responsive platform that showed, compared with g-C3N4-free TiNTs, a strong enhancement for photoelectrochemical and bias-free H2 evolution (15.62??Lh-1?cm-2), which was almost a 98-fold increase in the H2 production rate of TiNTs (0.16??Lh-1?cm-2). In a wider context, the g-C3N4-combined 3?D nanoporous/nanotubular structure thus provides a platform with significant visible-light response in photocatalytic applications.

| S-EPMC5114716 | biostudies-literature

Enhanced photocatalytic activity of Se-doped TiO2 under visible light irradiation.

Project description:Anatase TiO2 is a typical photocatalyst, and its excellent performance is limited in ultraviolet light range due to its wide band gap of 3.2?eV. A series of Se-doped TiO2 nanoparticles in anatase structure with various Se concentrations up to 17.1?at.% were prepared using sol-gel method. The doped Se ions are confirmed to be mainly in the valence state of?+?4, which provides extra electronic states in the band gap of TiO2. The band gap is effectively narrowed with the smallest gap energy of 2.17?eV, and the photocatalytic activity is effectively improved due to the extended absorption range. The photocatalytic activity was evaluated by the degradation of Rhodamine B (RhB) in aqueous solution under visible light irradiation. The results show that Se doping significantly improves the photocatalytic activity of TiO2 and 13.63?at.% Se-doped TiO2 has the best performance.

| S-EPMC5993730 | biostudies-literature

Spatial separation of oxidation and reduction co-catalysts for efficient charge separation: Pt@TiO2@MnO x hollow spheres for photocatalytic reactions.

Project description:Efficient charge separation is a critical factor for solar energy conversion by heterogeneous photocatalysts. This paper describes the complete spatial separation of oxidation and reduction cocatalysts to enhance the efficacy of charge separation and surface reaction. Specifically, we design Pt@TiO2@MnO x hollow spheres (PTM-HSs) with Pt and MnO x loaded onto the inner and outer surface of TiO2 shells, respectively. Pt favours electron trapping, while MnO x tends to collect holes. Upon generation from TiO2, electrons and holes flow inward and outward of the spherical photocatalyst, accumulating on the corresponding cocatalysts, and then take part in redox reactions. Combined with other advantages, such as the large surface area and appropriate pore size, the PTM-HSs exhibit high efficiency for the photocatalytic oxidation of water and benzyl alcohol. The mechanism of the oxidation process of benzyl alcohol over the photocatalyst is also presented.

| S-EPMC5530359 | biostudies-literature

Ti3C2 MXene co-catalyst on metal sulfide photo-absorbers for enhanced visible-light photocatalytic hydrogen production.

Project description:Scalable and sustainable solar hydrogen production through photocatalytic water splitting requires highly active and stable earth-abundant co-catalysts to replace expensive and rare platinum. Here we employ density functional theory calculations to direct atomic-level exploration, design and fabrication of a MXene material, Ti3C2 nanoparticles, as a highly efficient co-catalyst. Ti3C2 nanoparticles are rationally integrated with cadmium sulfide via a hydrothermal strategy to induce a super high visible-light photocatalytic hydrogen production activity of 14,342??mol?h-1?g-1 and an apparent quantum efficiency of 40.1% at 420?nm. This high performance arises from the favourable Fermi level position, electrical conductivity and hydrogen evolution capacity of Ti3C2 nanoparticles. Furthermore, Ti3C2 nanoparticles also serve as an efficient co-catalyst on ZnS or ZnxCd1-xS. This work demonstrates the potential of earth-abundant MXene family materials to construct numerous high performance and low-cost photocatalysts/photoelectrodes.

| S-EPMC5512649 | biostudies-literature

Hydrogen and Propane Production From Butyric Acid Photoreforming Over Pt-TiO2.

Project description:Photocatalysis is a promising technology from economic, energetic, and ecological points of view because it takes advantage of solar light. Hence, it is one of the investigated green routes to produce hydrogen from renewable energy resources. Butyric acid (BA) is largely present in wastewater and as an intermediate product in anaerobic digestion and therefore it is an inexpensive resource, which can be converted to valuable chemicals. In this work, photoreforming of butyric acid (BAPR) under UV light in aqueous suspensions of platinum-modified titanium dioxide-based catalysts is reported for the first time. Titania nanotubes (TNT) synthesized and calcined at different temperatures (300, 400, 500°C) and commercial TiO2 (P25), decorated with platinum nanoparticles, have been tested and characterized through different techniques including X-ray powder diffraction, UV-vis diffuse reflectance and photoluminescence spectroscopy, transmission electron microscopy, BET and porosimetry analysis. The main identified products of the BAPR were H2, propane, CO2 and several organic acids (e.g., pentanoic and 3-methylhexanoic acid). It has been found that the morphology and crystallinity of the photocatalysts affected dramatically their optical properties and, consequently, the reaction rate and the product distribution. Specifically, the highest conversion of BA (XBA) and selectivity toward H2 (SH2) was recorded with P25-Pt (XBA = 26.9%, SH2 = 47.2% after 8 h of irradiation). TNT-400-Pt showed the highest selectivity toward propane (SC3H8 = 16.1%) with XBA = 23.4% and SH2 = 36.2%. The activity results in conjunction with the characterization of the catalysts highlighted that the main factor affecting the activity in terms of XBA and generation of H2 was the crystallinity, and in particular the presence of rutile phase in TiO2, whereas SC3H8 appears to increase when the electron-holes recombination is lower.

| S-EPMC6692698 | biostudies-literature

CdSe nanorod/TiO2 nanoparticle heterojunctions with enhanced solar- and visible-light photocatalytic activity.

Project description:CdSe nanorods (NRs) with an average length of ≈120 nm were prepared by a solvothermal process and associated to TiO2 nanoparticles (Aeroxide® P25) by annealing at 300 °C for 1 h. The content of CdSe NRs in CdSe/TiO2 composites was varied from 0.5 to 5 wt %. The CdSe/TiO2 heterostructured materials were characterized by XRD, TEM, SEM, XPS, UV-visible spectroscopy and Raman spectroscopy. TEM images and XRD patterns show that CdSe NRs with wurtzite structure are associated to TiO2 particles. The UV-visible spectra demonstrate that the narrow bandgap of CdSe NRs serves to increase the photoresponse of CdSe/TiO2 composites until ≈725 nm. The CdSe (2 wt %)/TiO2 composite exhibits the highest photocatalytic activity for the degradation of rhodamine B in aqueous solution under simulated sunlight or visible light irradiation. The enhancement in photocatalytic activity likely originates from CdSe sensitization of TiO2 and the heterojunction between these materials which facilitates electron transfer from CdSe to TiO2. Due to its high stability (up to ten reuses without any significant loss in activity), the CdSe/TiO2 heterostructured catalysts show high potential for real water decontamination.

| S-EPMC5753051 | biostudies-literature

Controlled Periodic Illumination Enhances Hydrogen Production by over 50% on Pt/TiO2.

Project description:Efficient solar water photosplitting is plagued by large overpotentials of the HER and OER. Even with a noble metal catalyst, the hydrogen evolution reaction can be limited by the strong M-H bonding over some metals, such as Pt, Pd, and Rh, inhibiting hydrogen desorption. H absorption is regulated by the potential at the metal nanoparticles. Through controlled periodic illumination of a Pt/TiO2 suspension, we hypothesized a fast variation of the photopotential that induced catalytic surface resonance on the metal, resulting in more than a 50% increase of the efficiency at frequencies higher than 80 Hz.

| S-EPMC8294008 | biostudies-literature

Spaced TiO2 Nanotubes Enable Optimized Pt Atomic Layer Deposition for Efficient Photocatalytic H2 Generation.

Project description:In the present work, we report the use of TiO2 nanotube (NT) layers with a regular intertube spacing that are decorated by Pt nanoparticles through the atomic layer deposition (ALD) of Pt. These Pt-decorated spaced (SP) TiO2 NTs are subsequently explored for photocatalytic H2 evolution and are compared to classical close-packed (CP) TiO2 NTs that are also decorated with various amounts of Pt by using ALD. On both tube types, by varying the number of ALD cycles, Pt nanoparticles of different sizes and areal densities are formed, uniformly decorating the inner and outer walls from tube top to tube bottom. The photocatalytic activity for H2 evolution strongly depends on the size and density of Pt nanoparticles, driven by the number of ALD cycles. We show that, for SP NTs, a much higher photocatalytic performance can be achieved with significantly smaller Pt nanoparticles (i.e. for fewer ALD cycles) compared to CP NTs.

| S-EPMC6168027 | biostudies-literature

Nickel nanoparticle-activated MoS2 for efficient visible light photocatalytic hydrogen evolution.

Project description:Direct sunlight-induced water splitting for photocatalytic hydrogen evolution is the dream for an ultimate clean energy source. So far, typical photocatalysts require complicated synthetic processes and barely work without additives or electrolytes. Here, we report the realization of a hydrogen evolution strategy with a novel Ni-Ag-MoS2 ternary nanocatalyst under visible/sun light. Synthesized through an ultrasound-assisted wet method, the composite exhibits stable catalytic activity for long-term hydrogen production from both pure and natural water. A high efficiency of 73 μmol g-1 W-1 h-1 is achieved with only a visible light source and the (MoS2)84Ag10Ni6 catalyst, matching the values of present additive-enriched photocatalysts. Verified by experimental characterizations and first-principles calculations, the enhanced photocatalytic ability is attributed to effective charge migration through the dangling bonds at the Ni-Ag-MoS2 alloy interface and the activation of the MoS2 basal planes.

| S-EPMC9219418 | biostudies-literature