Browse
Submit Data
Databases
API
Help

Dataset Information

28 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Three-Dimensional Monolithically Self-Grown Metal Oxide Highly Dense Nanonetworks as Free-Standing High-Capacity Anodes for Lithium-Ion Batteries.

ABSTRACT: Transition metal oxides (TMOs) have been widely studied as potential next-generation anode materials, owing to their high theoretical gravimetric capacity. However, to date, these anodes syntheses are plagued with time-consuming preparation processes, two-dimensional electrode fabrication, binder requirements, and short operational cycling lives. Here, we present a scalable single-step reagentless process for the synthesis of highly dense Mn₃O₄-based nanonetwork anodes based on a simple thermal treatment transformation of low-grade steel substrates. The monolithic solid-state chemical self-transformation of the steel substrate results in a highly dense forest of Mn₃O₄ nanowires, which transforms the electrochemically inactive steel substrate into an electrochemically highly active anode. The proposed method, beyond greatly improving the current TMO performance, surpasses state-of-the-art commercial silicon anodes in terms of capacity and stability. The three-dimensional self-standing anode exhibits remarkably high capacities (>1500 mA h/g), a stable cycle life (>650 cycles), high Coulombic efficiencies (>99.5%), fast rate performance (>1.5 C), and high areal capacities (>2.5 mA h/cm²). This novel experimental paradigm acts as a milestone for next-generation anode materials in lithium-ion batteries, and pioneers a universal method to transform different kinds of widely available, low-cost, steel substrates into electrochemically active, free-standing anodes and allows for the massive reduction of anode production complexity and costs.

SUBMITTER: Cohen A

PROVIDER: S-EPMC9247978 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

0D-1D Hybrid Silicon Nanocomposite as Lithium-Ion Batteries Anodes.

Project description:Lithium ion batteries (LIBs) are the enabling technology for many of the societal changes that are expected to happen in the following years. Among all the challenges for which LIBs are the key, vehicle electrification is one of the most crucial. Current battery materials cannot provide the required power densities for such applications and therefore, it makes necessary to develop new materials. Silicon is one of the proposed as next generation battery materials, but still there are challenges to overcome. Poor capacity retention is one of those drawbacks, and because it is tightly related with its high capacity, it is a problem rather difficult to address with common and scalable fabrication processes. Here we show that combining 0D and 1D silicon nanostructures, high capacity and stability can be achieved even using standard electrode fabrication processes. Capacities as high as 1200 mAh/g for more than 500 cycles at high current densities (2 A/g) were achieved with the produced hybrid 0D/1D electrodes. In this research, it was shown that while 0D nanostructures provide good strain relaxation capabilities, 1D nanomaterials contribute with enhanced cohesion and conductive matrix integrity.

| S-EPMC7153466 | biostudies-literature

Heteroatom Doped-Carbon Nanospheres as Anodes in Lithium Ion Batteries.

Project description:Long cycle performance is a crucial requirement in energy storage devices. New formulations and/or improvement of "conventional" materials have been investigated in order to achieve this target. Here we explore the performance of a novel type of carbon nanospheres (CNSs) with three heteroatom co-doped (nitrogen, phosphorous and sulfur) and high specific surface area as anode materials for lithium ion batteries. The CNSs were obtained from carbonization of highly-crosslinked organo (phosphazene) nanospheres (OPZs) of 300 nm diameter. The OPZs were synthesized via a single and facile step of polycondensation reaction between hexachlorocyclotriphosphazene (HCCP) and 4,4'-sulphonyldiphenol (BPS). The X-ray Photoelectron Spectroscopy (XPS) analysis showed a high heteroatom-doping content in the structure of CNSs while the textural evaluation from the N₂ sorption isotherms revealed the presence of micro- and mesopores and a high specific surface area of 875 m²/g. The CNSs anode showed remarkable stability and coulombic efficiency in a long charge-discharge cycling up to 1000 cycles at 1C rate, delivering about 130 mA·h·g-1. This study represents a step toward smart engineering of inexpensive materials with practical applications for energy devices.

| S-EPMC5456559 | biostudies-literature

High-capacity rechargeable batteries based on deeply cyclable lithium metal anodes.

Project description:Discovering new chemistry and materials to enable rechargeable batteries with higher capacity and energy density is of paramount importance. While Li metal is the ultimate choice of a battery anode, its low efficiency is still yet to be overcome. Many strategies have been developed to improve the reversibility and cycle life of Li metal electrodes. However, almost all of the results are limited to shallow cycling conditions (e.g., 1 mAh cm-2) and thus inefficient utilization (<1%). Here we achieve Li metal electrodes that can be deeply cycled at high capacities of 10 and 20 mAh cm-2 with average Coulombic efficiency >98% in a commercial LiPF6/carbonate electrolyte. The high performance is enabled by slow release of LiNO3 into the electrolyte and its subsequent decomposition to form a Li3N and lithium oxynitrides (LiN x Oy)-containing protective layer which renders reversible, dendrite-free, and highly dense Li metal deposition. Using the developed Li metal electrodes, we construct a Li-MoS3 full cell with the anode and cathode materials in a close-to-stoichiometric amount ratio. In terms of both capacity and energy, normalized to either the electrode area or the total mass of the electrode materials, our cell significantly outperforms other laboratory-scale battery cells as well as the state-of-the-art Li ion batteries on the market.

| S-EPMC5984539 | biostudies-literature

In-situ Grown SnO<sub>2</sub> Nanospheres on Reduced GO Nanosheets as Advanced Anodes for Lithium-ion Batteries.

Project description:Nanostructured tin dioxide (SnO2) has emerged as a promising anode material for lithium-ion batteries (LIBs) due to its high theoretical capacity (1494?mA?h?g-1) and excellent stability. Unfortunately, the rapid capacity fading and poor electrical conductivity of bulk SnO2 material restrict its practical application. Here, SnO2 nanospheres/reduced graphene oxide nanosheets (SRG) are fabricated through in-situ growth of carbon-coated SnO2 using template-based approach. The nanosheet structure with the external layer of about several nanometers thickness can not only accommodate the volume change of Sn lattice during cycling but also enhance the electrical conductivity effectively. Benefited from such design, the SRG composites could deliver an initial discharge capacity of 1212.3?mA?h?g-1 at 0.1?A?g-1, outstanding cycling performance of 1335.6?mA?h?g-1 after 500 cycles at 1?A?g-1, and superior rate capability of 502.1?mA?h?g-1 at 5?A?g-1 after 10 cycles. Finally, it is believed that this method could provide a versatile and effective process to prepare other metal-oxide/reduced graphene oxide (rGO) 2D nanocomposites.

| S-EPMC6587327 | biostudies-literature

Phosphorus-doped silicon nanorod anodes for high power lithium-ion batteries.

Project description:Heavy-phosphorus-doped silicon anodes were fabricated on CuO nanorods for application in high power lithium-ion batteries. Since the conductivity of lithiated CuO is significantly better than that of CuO, after the first discharge, the voltage cut-off window was then set to the range covering only the discharge-charge range of Si. Thus, the CuO core was in situ lithiated and acts merely as the electronic conductor in the following cycles. The Si anode presented herein exhibited a capacity of 990 mAh/g at the rate of 9 A/g after 100 cycles. The anode also presented a stable rate performance even at a current density as high as 20 A/g.

| S-EPMC5301996 | biostudies-literature

Silicon-Nanographite Aerogel-Based Anodes for High Performance Lithium Ion Batteries.

Project description:To increase the energy storage density of lithium-ion batteries, silicon anodes have been explored due to their high capacity. One of the main challenges for silicon anodes are large volume variations during the lithiation processes. Recently, several high-performance schemes have been demonstrated with increased life cycles utilizing nanomaterials such as nanoparticles, nanowires, and thin films. However, a method that allows the large-scale production of silicon anodes remains to be demonstrated. Herein, we address this question by suggesting new scalable nanomaterial-based anodes. Si nanoparticles were grown on nanographite flakes by aerogel fabrication route from Si powder and nanographite mixture using polyvinyl alcohol (PVA). This silicon-nanographite aerogel electrode has stable specific capacity even at high current rates and exhibit good cyclic stability. The specific capacity is 455 mAh g-1 for 200th cycles with a coulombic efficiency of 97% at a current density 100 mA g-1.

| S-EPMC6787263 | biostudies-literature

Lithium Titanate/Carbon Nanotubes Composites Processed by Ultrasound Irradiation as Anodes for Lithium Ion Batteries.

Project description:In this work, lithium titanate nanoparticles (nLTO)/single wall carbon nanotubes (SWCNT) composite electrodes are prepared by the combination of an ultrasound irradiation and ultrasonic spray deposition methods. It was found that a mass fraction of 15% carbon nanotubes optimizes the electrochemical performance of nLTO electrodes. These present capacities as high as 173, 130, 110 and 70 mAh.g-1 at 0.1C, 1C, 10C and 100C, respectively. Moreover, after 1000 cycles at 1C, the nLTO/SWCNT composites present a capacity loss of just 9% and a Coulombic efficiency of 99.8%. Therefore, the presented methodology might be extended to other suitable active materials in order to manufacture binder free electrodes with optimal energy storage capabilities.

| S-EPMC5548767 | biostudies-literature

Computational Investigation of Copper Phosphides as Conversion Anodes for Lithium-Ion Batteries.

Project description:Using first-principles structure searching with density-functional theory (DFT), we identify a novel Fm3?m phase of Cu2P and two low-lying metastable structures, an I4?3d-Cu3P phase and a Cm-Cu3P11 phase. The computed pair distribution function of the novel Cm-Cu3P11 phase shows its structural similarity to the experimentally identified Cm-Cu2P7 phase. The relative stability of all Cu-P phases at finite temperatures is determined by calculating the Gibbs free energy using vibrational effects from phonon modes at 0 K. From this, a finite-temperature convex hull is created, on which Fm3?m-Cu2P is dynamically stable and the Cu3-x P (x < 1) defect phase Cmc21-Cu8P3 remains metastable (within 20 meV/atom of the convex hull) across a temperature range from 0 to 600 K. Both CuP2 and Cu3P exhibit theoretical gravimetric capacities higher than contemporary graphite anodes for Li-ion batteries; the predicted Cu2P phase has a theoretical gravimetric capacity of 508 mAh/g as a Li-ion battery electrode, greater than both Cu3P (363 mAh/g) and graphite (372 mAh/g). Cu2P is also predicted to be both nonmagnetic and metallic, which should promote efficient electron transfer in the anode. Cu2P's favorable properties as a metallic, high-capacity material suggest its use as a future conversion anode for Li-ion batteries; with a volume expansion of 99% during complete cycling, Cu2P anodes could be more durable than other conversion anodes in the Cu-P system, with volume expansions greater than 150%. The structures and figures presented in this paper, and the code used to generate them, can be interactively explored online using Binder.

| S-EPMC7469244 | biostudies-literature

Hollow porous SiO2 nanocubes towards high-performance anodes for lithium-ion batteries.

Project description:The high theoretical capacity and low discharge potential of silicon have attracted much attention on Si-based anodes. Herein, hollow porous SiO2 nanocubes have been prepared via a two-step hard-template process and evaluated as electrode materials for lithium-ion batteries. The hollow porous SiO2 nanocubes exhibited a reversible capacity of 919 mAhg(-1) over 30 cycles. The reasonable property could be attributed to the unique hollow nanostructure with large volume interior and numerous crevices in the shell, which could accommodate the volume change and alleviate the structural strain during Li ions' insertion and extraction, as well as allow rapid access of Li ions during charge/discharge cycling. It is found that the formation of irreversible or reversible lithium silicates in the anodes determines the capacity of a deep-cycle battery, fast transportation of Li ions in hollow porous SiO2 nanocubes is beneficial to the formation of Li2O and Si, contributing to the high reversible capacity.

| S-EPMC3610094 | biostudies-literature

Three-Dimensional Self-assembled Hairball-Like VS<sub>4</sub> as High-Capacity Anodes for Sodium-Ion Batteries.

Project description:Sodium-ion batteries (SIBs) are considered to be attractive candidates for large-scale energy storage systems because of their rich earth abundance and consistent performance. However, there are still challenges in developing desirable anode materials that can accommodate rapid and stable insertion/extraction of Na+ and can exhibit excellent electrochemical performance. Herein, the self-assembled hairball-like VS4 as anodes of SIBs exhibits high discharge capacity (660 and 589 mAh g-1 at 1 and 3 A g-1, respectively) and excellent rate property (about 100% retention at 10 and 20 A g-1 after 1000 cycles) at room temperature. Moreover, the VS4 can also exhibit 591 mAh g-1 at 1 A g-1 after 600 cycles at 0 °C. An unlike traditional mechanism of VS4 for Na+ storage was proposed according to the dates of ex situ characterization, cyclic voltammetry, and electrochemical kinetic analysis. The capacities of the final stabilization stage are provided by the reactions of reversible transformation between Na2S and S, which were considered the reaction mechanisms of Na-S batteries. This work can provide a basis for the synthesis and application of sulfur-rich compounds in fields of batteries, semiconductor devices, and catalysts.

| S-EPMC7770669 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data