Browse
Submit Data
Databases
API
Help

Dataset Information

31 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Synthesis and Characterization of 2D-WS2 Incorporated Polyaniline Nanocomposites as Photo Catalyst for Methylene Blue Degradation.

ABSTRACT: 2D-WS₂ incorporated polyaniline nanocomposites (WS₂-PANI) with varying WS₂ loadings were synthesized by a facile in situ oxidative polymerization technique which effectively promoted photocatalytic waste-water remediation using methylene blue (MB) as the probe molecules. The physicochemical properties of WS₂-PANI (1-5) nanocomposites were investigated using multifarious techniques such as FT-IR, XRD, BET surface area, TGA, FESEM, and HRTEM. An electron microscopy analysis that was performed using HRTEM analysis confirm the layered structure of WS₂ with periodic planes (100) separated by 0.27 nm. The photocatalytic performance of the WS₂-PANI (1-5) for MB degradation performed under UV photo irradiation clearly showed that 2 wt.% WS₂-PANI outperformed other variants with 93% degradation MB within 90 min. Furthermore, the catalytic material was reusable for five cycles without a significant loss of the catalytic performance.

SUBMITTER: Shahabuddin S

PROVIDER: S-EPMC9254741 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

SrTiO₃ Nanocube-Doped Polyaniline Nanocomposites with Enhanced Photocatalytic Degradation of Methylene Blue under Visible Light.

Project description:The present study highlights the facile synthesis of polyaniline (PANI)-based nanocomposites doped with SrTiO₃ nanocubes synthesized via the in situ oxidative polymerization technique using ammonium persulfate (APS) as an oxidant in acidic medium for the photocatalytic degradation of methylene blue dye. Field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), X-ray diffraction (XRD), UV⁻Vis spectroscopy, Brunauer⁻Emmett⁻Teller analysis (BET) and Fourier transform infrared spectroscopy (FTIR) measurements were used to characterize the prepared nanocomposite photocatalysts. The photocatalytic efficiencies of the photocatalysts were examined by degrading methylene blue (MB) under visible light irradiation. The results showed that the degradation efficiency of the composite photocatalysts that were doped with SrTiO₃ nanocubes was higher than that of the undoped polyaniline. In this study, the effects of the weight ratio of polyaniline to SrTiO₃ on the photocatalytic activities were investigated. The results revealed that the nanocomposite P-Sr500 was found to be an optimum photocatalyst, with a 97% degradation efficiency after 90 min of irradiation under solar light.

| S-EPMC6432585 | biostudies-literature

Degradation of Methylene Blue with a Cu(II)-Quinoline Complex Immobilized on a Silica Support as a Photo-Fenton-Like Catalyst.

Project description:A Cu(II)-quinoline complex immobilized on a silica support was prepared to enhance the degradation of dyes. Mesoporous silica functionalized with this Cu(II) complex was turned into a photo-Fenton-like catalyst. Various techniques were used to characterize the resulting material, and the catalytic activity was determined by the degradation of methylene blue (MB) under UV light irradiation. The Cu(II) ion was successfully coordinated to the quinoline ligand on a silica support. The dye degradation investigation has shown that 95% of the dye was degraded in 2.5 h. The active radical species involved in the reaction were OH• and O2 •-, suggesting that a peroxo complex intermediate might be formed during degradation processes.

| S-EPMC9494654 | biostudies-literature

Enhanced photocatalytic degradation of methylene blue dye using eco-friendly synthesized rGO@ZnO nanocomposites.

Project description:Industrial chemical pollutants such as methylene blue (MB) dye are released into the water body and potentially cause harm to the human and aquatic biosphere. Therefore, this study aims to synthesize eco-friendly nanocatalysts, i.e., reduced graphene oxide (rGO), zinc oxide (ZnO), and reduced graphene oxide-zinc oxide (rGO@ZnO) nanocomposites, for efficient photocatalytic degradation of MB dye. A graphite rod was obtained from waste dry cell batteries for the electrochemical exfoliation synthesis of graphene oxide (GO) and rGO. For the eco-friendly synthesis of ZnO and rGO@ZnO nanocatalysts, Croton macrostachyus leaf extract was used as a reducing and capping agent. The synthesized nanocatalysts were characterized using a UV-Vis spectrophotometer, Fourier transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy with energy-dispersive X-ray. The eco-friendly synthesized rGO, ZnO, and rGO@ZnO nanocatalysts were applied for the photocatalytic degradation of MB dye using direct sunlight irradiation. At optimum parameters, photocatalytic degradation of MB dye efficiency reached up to 66%, 96.5%, and 99.0%, respectively. Furthermore, kinetics of the photodegradation reaction based on rGO, ZnO, and rGO@ZnO nanocatalysts follow pseudo-first-order with a rate constant of 2.16 × 10-3 min-1, 4.97 × 10-3 min-1, and 5.03 × 10-3 min-1, respectively. Lastly, this study promotes a low catalyst load (20 mg) for the efficient photodegradation of MB dye.

| S-EPMC10721910 | biostudies-literature

Rapid degradation of methylene blue in a novel heterogeneous Fe3O4?@rGO@TiO2-catalyzed photo-Fenton system.

Project description:Herein, a ternary nanocomposite with TiO2 nanoparticles anchored on reduced graphene oxide (rGO)-encapsulated Fe3O4 spheres (Fe3O4@rGO@TiO2) is presented as a high efficient heterogeneous catalyst for photo-Fenton degradation of recalcitrant pollutants under neutral pH. Fe3O4@rGO@TiO2 was synthesized by depositing TiO2 nanoparticles on the surface of the Fe3O4 spheres wrapped by graphene oxide (GO) which was obtained by an electrostatic layer-by-layer method. This as-prepared catalyst reflected good ferromagnetism and superior stability which makes it convenient to be separated and recycled. Due to the synergic effects between the different components composed the catalyst, swift reduction of Fe(3+) can be achieved to regenerate Fe(2+). Fe3O4@rGO@TiO2 exhibited enhancing catalytic activity for the degradation of azo-dyes compared with Fe3O4, Fe3O4@SiO2@TiO2 or SiO2@rGO@TiO2, further conforming the rapid redox reaction between Fe(2+) and Fe(3+). All these merits indicate that the composite catalyst possesses great potential for visible-light driven destruction of organic compounds.

| S-EPMC4441169 | biostudies-literature

ZnO/Boron Nitride Quantum Dots Nanocomposites for the Enhanced Photocatalytic Degradation of Methylene Blue and Methyl Orange.

Project description:In this study, a heterostructure photocatalyst of ZnO nanoparticles decorated with boron nitride quantum dots (ZnO/BNQDs) was successfully synthesized by a simple solution procedure. The synthesized ZnO/BNQDs show that the BNQDs effectively suppress the recombination of photoinduced electrons and holes and the transfer of holes from ZnO nanoparticles by the formation of a heterojunction. The ZnO/BNQD nanocomposites thus demonstrate superior photocatalytic performances and excellent stability for the degradation of methylene blue (MB) and methyl orange (MO) under UV light irradiation. Based on the obtained results, the possible photocatalytic mechanism is proposed and discussed. Thus, the ZnO/BNQD nanocomposites demonstrate potential as an efficient low-cost photocatalyst for application in the photodegradation of organic dyes in wastewater for environmental remediation.

| S-EPMC9612324 | biostudies-literature

Photocatalytic degradation of methylene blue with spent FCC catalyst loaded with ferric oxide and titanium dioxide.

Project description:The spent fluid catalytic cracking (FCC) catalyst has been loaded with ferric oxide (Fe2O3) and titanium dioxide (TiO2). Fe-Ti/SF composite (loaded with 5 wt% TiO2 and 5 wt% Fe2O3), Fe/SF composite (loaded with10 wt% Fe2O3) and Ti/SF composite (loaded with 10 wt% TiO2) have been fabricated via a modified-impregnation method. The band gaps of the Fe-Ti/SF, Fe/SF and Ti/SF composites (evaluated by the energy versus [F(R∞)hv]n) are 2.23, 1.98 and 3.0 eV, respectively. Electrochemical impedance spectroscopy shows that the Fe-Ti/SF has lower electron transfer resistance, it has the small charge transfer resistance and fast charge transfer rate. The interparticle electrons transfer between the Fe2O3 and TiO2, which can improve the separation of the photo-electrons and holes. The holes transfer from valence band of TiO2 to the valence band of Fe2O3, which can provide more active sites around the adsorbed molecules. The methylene blue degradation efficiencies (with the Fe-Ti/SF, Fe/SF and Ti/SF composites) are ~ 94.2%, ~ 22.3% and ~ 54.0% in 120 min, respectively. This work reveals that the spent FCC catalyst as supporter can be loaded with Fe2O3 and TiO2. This composite is highly suitable for degradation of methylene blue, which can provide a potential method to dispose the spent FCC catalyst in industry.

| S-EPMC7391759 | biostudies-literature

Fe-Immobilised Catechol-Based Hypercrosslinked Polymer as Heterogeneous Fenton Catalyst for Degradation of Methylene Blue in Water.

Project description:Clean water is one of the sustainable development goals. Organic dye is one of the water pollutants affecting water quality. Hence, the conversion of dyes to safer species is crucial for water treatment. The Fenton reaction using Fe as a catalyst is a promising process. However, homogeneous catalysts are normally sensitive, difficult to separate, and burdensome to reuse. Therefore, a catechol-based hypercrosslinked polymer (catechol-HCP) was developed as an inexpensive solid support for Fe (catechol-HCP-Fe) and applied as a heterogenous Fenton catalyst. The good interaction of the catechol moiety with Fe, as well as the porous structure, simple preparation, low cost, and high stability of catechol-HCP, make it beneficial for Fe-loading in the polymer and Fenton reaction utilisation. The catechol-HCP-Fe demonstrated good catalytic activity for methylene blue (MB) degradation in a neutral pH. Complete decolouration of 100 ppm MB could be observed within 25 min. The rate of reaction was influenced by H2O2 concentration, polymer dose, MB concentration, pH, and temperature. The catechol-HCP-Fe could be reused for at least four cycles. The dominant reactive species of the reaction was considered to be singlet oxygen (1O2), and the plausible mechanism of the reaction was proposed.

| S-EPMC9269043 | biostudies-literature

In-Situ Fabrication of g-C₃N₄/ZnO Nanocomposites for Photocatalytic Degradation of Methylene Blue: Synthesis Procedure Does Matter.

Project description:The nanocomposite preparation procedure plays an important role in achieving a well-established heterostructured junction, and hence, an optimized photocatalytic activity. In this study, a series of g-C₃N₄/ZnO nanocomposites were prepared through two distinct procedures of a low-cost, environmentally-friendly, in-situ fabrication process, with urea and zinc acetate being the only precursor materials. The physicochemical properties of synthesized g-C₃N₄/ZnO composites were mainly characterized by XRD, UV⁻VIS diffuse reflectance spectroscopy (DRS), N₂ adsorption-desorption, FTIR, TEM, and SEM. These nanocomposites' photocatalytic properties were evaluated in methylene blue (MB) dye photodecomposition under UV and sunlight irradiation. Interestingly, compared with ZnO nanorods, g-C₃N₄/ZnO nanocomposites (x:1, obtained from urea and ZnO nanorods) exhibited weak photocatalytic activity likely due to a "shading effect", while nanocomposites (x:1 CN, made from g-C₃N₄ and zinc acetate) showed enhanced photocatalytic activity that can be ascribed to the effective establishment of heterojunctions. A kinetics study showed that a maximum reaction rate constant of 0.1862 min-1 can be achieved under solar light illumination, which is three times higher than that of bare ZnO nanorods. The photocatalytic mechanism was revealed by determining reactive species through adding a series of scavengers. It suggested that reactive ∙O₂- and h⁺ radicals played a major role in promoting dye photodegradation.

| S-EPMC6409917 | biostudies-literature

2D-3D graphene-coated diatomite as a support toward growing ZnO for advanced photocatalytic degradation of methylene blue.

Project description:In this work, a diatomite@graphene@ZnO (ZGD) photocatalyst was synthesized by chemical vapor deposition and hydrothermal methods and used for the photocatalytic degradation of methylene blue. The characterization of the prepared nanocomposite was performed by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, X-ray diffraction (XRD), and N2 adsorption-desorption techniques. Ultraviolet-visible diffuse reflectance spectroscopy (DRS) showed that the prepared ZGD photocatalyst enhanced the absorption of visible light and induced a red-shift. Photoluminescence spectroscopy (PL) revealed that the recombination of electron and hole pairs can be effectively suppressed. Besides, the synergistic effect of diatomite and graphene avoids the agglomeration of ZnO, increases the number of surface adsorption sites, and limits the electron transport, consequently improving the photocatalytic activity of ZnO. When ZGD-3 was UV-irradiated (λ = 663 nm) for 90 minutes, the degradation effectiveness of methylene blue (MB) was 100%. After the fifth repetition, the photocatalytic degradation efficiency was always greater than 95%. Simply put, the ZGD nanocatalyst can be used as an efficient photocatalyst for dye wastewater treatment.

| S-EPMC9044178 | biostudies-literature

Synthesis of TiO2NWS@AuNPS Composite Catalyst for Methylene Blue Removal.

Project description:In this article, HBP-NH₂-modified titania nanowire (TiO2NWS)-decorated Au nanoparticles (TiO2NWS@AuNPS) were synthesized by one-step method. The role of HBP-NH₂ concentration in the formation of TiO2NWS was investigated. The fineness and uniformity of pure TiO2NWS were enhanced by absorbed amino groups from amino-terminated hyperbranched polymer (HBP-NH₂). The morphology and crystal structure of TiO2NWS and TiO2NWS@AuNPS were examined by transmission electron microscopy (TEM), X-ray diffraction (XRD), and Fournier transform infrared (FTIR) spectroscopy. The chemical states of gold, titanium and oxygen were analyzed by X-ray photoelectron spectroscopy (XPS). The results showed that at the concentration of HBP-NH₂ 100 g/L, the mean diameter of TiO2NWS was nearly 72 nm and Au nanoparticles were uniformly distributed on the surface of TiO2NWS. The presence of AuNPS improved the photocatalytic properties of TiO2NWS under UV light irradiation. The Au load was believed to improve the utilization rate of the photoelectron and activated the adsorbed oxygen. The obtained TiO2NWS@AuNPS decomposed 99.6% methylene blue (MB) after 300 min when subjected to UV light irradiation. After five cycles of the catalyzing process, the TiO2NWS@AuNPS still retained over 90% of its catalytic ability for MB. The Au deposition was found responsible for the high catalytic activity of TiO2NWS@AuNPS.

| S-EPMC6025176 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data