Steel slag as low-cost catalyst for artificial photosynthesis to convert CO2 and water into hydrogen and methanol.
Ontology highlight
ABSTRACT:
SUBMITTER: Fusco C
PROVIDER: S-EPMC9256681 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Soil washing is an effective remediation method to remove heavy metals from contaminated soil. However, it produces wastewater that contains large amounts of heavy metals, which lead to serious pollution. This study investigated the removal of vanadium (V) from synthetic soil washing effluent using BOF steel slag. The effects of particle size, slag dosage, initial pH, and initial vanadium concentration on removal behavior were studied. Adsorption kinetics and isotherms were also analyzed. The results showed that the vanadium removal efficiency increased as the steel slag particle size decreased and as the amount of slag increased. The initial pH and vanadium concentration did not play key roles. At the optimum particle size (<0.15 mm) and dosage (50 g/L), the removal rate reached 97.1% when treating 100 mg/L of vanadium. The influence of the washing reagent residue was studied to simulate real conditions. Citric acid, tartaric acid, and Na2EDTA all decreased the removal rate. While oxalic acid did not have negative effects on vanadium removal at concentrations of 0.05-0.2 mol/L, which was proved by experiments using real washing effluents. Considering both soil washing effect and effluent treatment, oxalic acid of 0.2 mol/L is recommended as soil washing reagent.
| S-EPMC5594007 | biostudies-literature
Project description:Both steelmaking via an electric arc furnace and manufacturing of portland cement are energy-intensive and resource-exploiting processes, with great amounts of carbon dioxide (CO2) emission and alkaline solid waste generation. In fact, most CO2 capture and storage technologies are currently too expensive to be widely applied in industries. Moreover, proper stabilization prior to utilization of electric arc furnace slag are still challenging due to its high alkalinity, heavy metal leaching potentials and volume instability. Here we deploy an integrated approach to mineralizing flue gas CO2 using electric arc furnace slag while utilizing the reacted product as supplementary cementitious materials to establish a waste-to-resource supply chain toward a circular economy. We found that the flue gas CO2 was rapidly mineralized into calcite precipitates using electric arc furnace slag. The carbonated slag can be successfully utilized as green construction materials in blended cement mortar. By this modulus, the global CO2 reduction potential using iron and steel slags was estimated to be ~138 million tons per year.
| S-EPMC5722910 | biostudies-literature
Project description:In this work, steel slag slurry was used in combination with O3 oxidation for the simultaneous removal of SO2 and NO x in a laboratory-scale wet flue gas desulfurization process. The effects of the oxidation temperature, steel slag concentration, initial SO2 concentration, and pH value on the desulfurization and denitrification efficiencies were studied. The results showed that the highest NO x removal efficiency occurred at an oxidation temperature of 90 °C. With an increase of the oxidation temperature above 90 °C, the denitrification efficiency decreased due to the decomposition of N2O5. The effect of the SO2 concentration on denitrification was complicated. When the concentration of SO2 was 500 ppm, generation of SO3 2- promoted the absorption of NO2. However, higher SO2 concentrations strengthened the competitive absorption of SO2 and NO x . In the pH range of 8.5-4.5, the denitrification efficiency was maintained at about 96%. The component analyses of the aqueous solution and the solid residue were conducted to investigate the compositions of the absorption products. The results showed that NO3 - and SO4 2- were the major anions in the aqueous solution. The nitrogen balance was analyzed to be 95.8%, clearly illustrating the migration and transformation path of nitrogen. In the solid residue, most alkaline substances were consumed, and the final products were mainly CaSO4 and FeO. Accordingly, the reaction mechanism of simultaneous desulfurization and denitrification using steel slag combined with ozone oxidation was proposed.
| S-EPMC8567348 | biostudies-literature
Project description:Carbon dioxide sequestration via carbonation of steel slags is a promising way of combining two waste products to create value. Understanding the dissolution kinetics of steel slags, which are alkaline and rich in calcium, in acidic media is essential to configure such a process. In this study, we seek to analyse the dissolution mechanism from experimental studies and develop a mathematical model considering the heterogeneous characteristics of slag. We found that the reduction in calcium extraction efficiency with an increase in particle size, which is normally associated with surface passivation or non-uniformity of samples, can be explained by considering the morphological features associated with the distribution of MgO-FeO (RO) phase in the calcium silicate matrix. We present a population balance model and show that the reduction in calcium extraction efficiency in coarse particle fractions is due to increased sporulation of the RO phase. The findings in the study suggest that the leaching of metal ions from slag is controlled by proton-promoted surface dissolution reaction, where the dependence of acid concentration follows the Langmuir-Hinshelwood adsorption isotherm. The model shows good agreement with a large set of parametric studies and demonstrates the importance of considering morphological features, as we progress towards development of a priori dissolution models for multi-mineral oxides and silicates.
| S-EPMC6501660 | biostudies-literature
Project description:Microbial rhodopsin, a significant contributor to sustaining life through light harvesting, holds untapped potential for carbon fixation. Here, we construct an artificial photosynthesis system which combines the proton-pumping ability of rhodopsin with an extracellular electron uptake mechanism, establishing a pathway to drive photoelectrosynthetic CO2 fixation by Ralstonia eutropha (also known as Cupriavidus necator) H16, a facultatively chemolithoautotrophic soil bacterium. R. eutropha is engineered to heterologously express an extracellular electron transfer pathway of Shewanella oneidensis MR-1 and Gloeobacter rhodopsin (GR). Employing GR and the outer-membrane conduit MtrCAB from S. oneidensis, extracellular electrons and GR-driven proton motive force are integrated into R. eutropha's native electron transport chain (ETC). Inspired by natural photosynthesis, the photoelectrochemical system splits water to supply electrons to R. eutropha via the Mtr outer-membrane route. The light-activated proton pump - GR, supported by canthaxanthin as an antenna, powers ATP synthesis and reverses the ETC to regenerate NADH/NADPH, facilitating R. eutropha's biomass synthesis from CO2. Overexpression of a carbonic anhydrase further enhances CO2 fixation. This artificial photosynthesis system has the potential to advance the development of efficient photosynthesis, redefining our understanding of the ecological role of microbial rhodopsins in nature.
| S-EPMC10696030 | biostudies-literature
Project description:The disposal of slag generated by the steel industry can have negative consequences upon the surrounding aquatic environment by the generation of high pH waters, leaching of potentially problematic trace metals, and rapid rates of calcite precipitation which smother benthic habitats. A 36-year dataset was collated from the long-term ambient monitoring of physicochemical parameters and elemental concentrations of samples from two steel slag leachate-affected watercourses in northern England. Waters were typified by elevated pH (>10), high alkalinity, and were rich in dissolved metals (e.g. calcium (Ca), aluminium (Al), and zinc (Zn)). Long-term trend analysis was performed upon pH, alkalinity, and Ca concentration which, in addition to Ca flux calculations, were used to highlight the longevity of pollution arising as a result of the dumping and subsequent leaching of steel slags. Declines in calcium and alkalinity have been modest over the monitoring period and not accompanied by significant declines in water pH. If the monotonic trends of decline in alkalinity and calcium continue in the largest of the receiving streams, it will be in the region of 50-80 years before calcite precipitation would be expected to be close to baseline levels, where ecological impacts would be negligible.
| S-EPMC4483270 | biostudies-literature
Project description:A H2SO4-H2O2 system was developed to enhance the efficacy of vanadium extraction from roasted vanadium steel slag. The optimum parameters and the behavior of vanadium extraction were investigated systematically. When 1 mL of H2O2 per gram of vanadium slag was added to a leaching mixture at 50 °C, along with 30% H2SO4, 80.5% of vanadium extraction was achieved within 15 min. However, without H2O2, only 58.5% of vanadium extraction was achieved at the same leaching time. The H2SO4-H2O2 system facilitated the dissolution of metallic ions in a short time and then triggered the production of strong oxidizing substances, such as HO• and O2 -•, via the Fenton reaction and Fenton-like reaction. Subsequently, the low-valence vanadium, existing in the leaching solution or located on the surface of the particle, was converted to pentavalent vanadium by strongly oxidizing substances, such as H2O2 and its derivatives HO• and O2. The complex oxides on the surface of the particle were destroyed, after which the vanadium inside the particle was gradually exposed to the acid leaching solution. The vanadium was oxidized to pentavalent vanadium, which then entered the leaching solution. Finally, a pathway of vanadium extraction via the H2SO4-H2O2 system was proposed to gain insight into rapid vanadium leaching.
| S-EPMC9330091 | biostudies-literature
Project description:Photoelectrochemical water splitting has been intensively investigated as artificial photosynthesis technology to convert solar energy into chemical energy. The use of seawater and salted water has advantages for minimum environmental burden; however, the oxidation of Cl- ion to hypochlorous acid (HClO), which has toxicity and heavy corrosiveness, should occur at the anode, along with the oxygen evolution. Here, O2 and HClO production in aqueous solution containing Cl- on photoanodes modified with various metal oxides was investigated. The modification of MnOx resulted in the promotion of the O2 evolution reaction (OER) specifically without HClO production over a wide range of conditions. The results will contribute not only to the practical application of artificial photosynthesis using salted water but also to the elucidation of substantial function of manganese as the element for OER center in natural photosynthesis.
| S-EPMC7584672 | biostudies-literature
Project description:The volume of slags generated from the steel industry is a source of possible resources which is constantly increasing. Specifically, in the production of stainless steel, specific and singular slags with unique characteristics are obtained, which allows considering an approach aimed at their use in new recycling ways. This work shows the feasibility of using stainless steel slag as a substitute for limestone filler in the manufacture of self-compacting concrete. The influence of different treatments applied to slags on physical and chemical properties was studied. On the other hand, the mechanical behaviour, as well as the durability acquired in self-compacting concrete, has been analysed. Very encouraging results were obtained, since this research demonstrates the possible application of this stainless steel slag as a construction material, improving sustainability and promoting circular economy processes, which are achieved through the minimisation of the waste disposal and accumulation.
| S-EPMC7254312 | biostudies-literature
Project description:Enhancing the intrinsic activity and space time yield of Cu based heterogeneous methanol synthesis catalysts through CO2 hydrogenation is one of the major topics in CO2 conversion into value-added liquid fuels and chemicals. Here we report inverse ZrO2/Cu catalysts with a tunable Zr/Cu ratio have been prepared via an oxalate co-precipitation method, showing excellent performance for CO2 hydrogenation to methanol. Under optimal condition, the catalyst composed by 10% of ZrO2 supported over 90% of Cu exhibits the highest mass-specific methanol formation rate of 524 gMeOHkgcat-1h-1 at 220 °C, 3.3 times higher than the activity of traditional Cu/ZrO2 catalysts (159 gMeOHkgcat-1h-1). In situ XRD-PDF, XAFS and AP-XPS structural studies reveal that the inverse ZrO2/Cu catalysts are composed of islands of partially reduced 1-2 nm amorphous ZrO2 supported over metallic Cu particles. The ZrO2 islands are highly active for the CO2 activation. Meanwhile, an intermediate of formate adsorbed on the Cu at 1350 cm-1 is discovered by the in situ DRIFTS. This formate intermediate exhibits fast hydrogenation conversion to methoxy. The activation of CO2 and hydrogenation of all the surface oxygenate intermediates are significantly accelerated over the inverse ZrO2/Cu configuration, accounting for the excellent methanol formation activity observed.
| S-EPMC7666171 | biostudies-literature