Browse
Submit Data
Databases
API
Help

Dataset Information

22 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

The Effect of Sibunit Carbon Surface Modification with Diazonium Tosylate Salts of Pd and Pd-Au Catalysts on Furfural Hydrogenation.

ABSTRACT: Herein, we investigated the effect of the support modification (Sibunit carbon) with diazonium salts of Pd and Pd-Au catalysts on furfural hydrogenation under 5 bars of H₂ and 50 °C. To this end, the surface of Sibunit (Cp) was modified with butyl (Cp-Butyl), carboxyl (Cp-COOH) and amino groups (Cp-NH₂) using corresponding diazonium salts. The catalysts were synthesized by the sol immobilization method. The catalysts as well as the corresponding supports were characterized by Fourier transform infrared spectroscopy, N₂ adsorption-desorption, inductively coupled plasma atomic emission spectroscopy, high resolution transmission electron microscopy, energy dispersive spectroscopy, X-ray diffraction, Hammet indicator method and X-ray photoelectron spectroscopy. The analysis of the results allowed us to determine the crucial influence of surface chemistry on the catalytic behavior of the studied catalysts, especially regarding selectivity. At the same time, the structural, textural, electronic and acid-base properties of the catalysts were practically unaffected. Thus, it can be assumed that the modification of Sibunit with various functional groups leads to changes in the hydrophobic/hydrophilic and/or electrostatic properties of the surface, which influenced the selectivity of the process.

SUBMITTER: German D

PROVIDER: S-EPMC9267796 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Finding Furfural Hydrogenation Catalysts via Predictive Modelling.

Project description:We combine multicomponent reactions, catalytic performance studies and predictive modelling to find transfer hydrogenation catalysts. An initial set of 18 ruthenium-carbene complexes were synthesized and screened in the transfer hydrogenation of furfural to furfurol with isopropyl alcohol complexes gave varied yields, from 62% up to >99.9%, with no obvious structure/activity correlations. Control experiments proved that the carbene ligand remains coordinated to the ruthenium centre throughout the reaction. Deuterium-labelling studies showed a secondary isotope effect (k(H):k(D)=1.5). Further mechanistic studies showed that this transfer hydrogenation follows the so-called monohydride pathway. Using these data, we built a predictive model for 13 of the catalysts, based on 2D and 3D molecular descriptors. We tested and validated the model using the remaining five catalysts (cross-validation, R(2)=0.913). Then, with this model, the conversion and selectivity were predicted for four completely new ruthenium-carbene complexes. These four catalysts were then synthesized and tested. The results were within 3% of the model's predictions, demonstrating the validity and value of predictive modelling in catalyst optimization.

| S-EPMC3501696 | biostudies-literature

Effect of Pd Precursor Salts on the Chemical State, Particle Size, and Performance of Activated Carbon-Supported Pd Catalysts for the Selective Hydrogenation of Palm Biodiesel.

Project description:To improve the oxidative stability of biodiesel fuel (BDF), the polyunsaturated fatty acid methyl esters (poly-FAME) presented in commercial palm oil-derived biodiesel fuel (palm-BDF) were selectively hydrogenated to monounsaturated fatty acid methyl esters (mono-FAME) under a mild condition (80 °C, 0.5 MPa) using activated carbon (AC)-supported Pd catalysts with a Pd loading of 1 wt.%. The partially hydrotreated palm-BDF (denoted as H-FAME) which has low poly-FAME components is a new type of BDF with enhanced quality for use in high blends. In this study, we reported that the chemical states and particle sizes of Pd in the prepared Pd/AC catalysts were significantly influenced by the Pd precursors, Pd(NO3)2 and Pd(NH3)4Cl2, and thus varied their hydrogenation activity and product selectivity. The 1%Pd/AC (nit) catalyst, prepared using Pd(NO3)2, presented high performance for selective hydrogenation of poly-FAME into mono-FAME with high oxidation stability, owning to its large Pd particles (8.4 nm). Conversely, the 1%Pd/AC (amc) catalyst, prepared using Pd(NH3)4Cl2, contained small Pd particles (2.7 nm) with a little Cl residues, which could be completely removed by washing with an aqueous solution of 0.1 M NH4OH. The small Pd particles gave increased selectivity toward unwanted-FAME components, particularly the saturated fatty acid methyl esters during the hydrogenation of poly-FAME. This selectivity is unprofitable for improving the biodiesel quality.

| S-EPMC7865769 | biostudies-literature

Surface modification of CoCr alloys by electrochemical reduction of diazonium salts.

Project description:Tailoring the surface chemistry of CoCr alloys is of tremendous interest in many biomedical applications. In this work, we show that CoCr can be modified by diazonium electrografting provided the surface is not homogeneously covered with an oxide layer. Cyclic voltammetry (CV) and X-ray photoelectron spectroscopy (XPS) show the electrografting of a poly(aminophenylene) (PAP) layer on CoCr when treated at a reductive potential (CoCr-0.5 V), whereas no PAP film was formed on CoCrOCP and CoCr1 V, treated at open circuit and anodic potentials respectively. Based on XPS results, we attributed the electrografting to the formation of carbide bonds between PAP and the inhomogeneous thin oxide layer of CoCr-0.5 V. We then show an example of application of PAP coatings on CoCr and prove that the presence of a PAP coating on CoCr-0.5 V results in a 5-fold increase of the adherence of poly methyl methacrylate (PMMA) to PAP-coated CoCr compared to uncoated samples; this is of prime significance to improving the long-term stability of dental prostheses. These findings support the importance of reducing the oxide layer for effective functionalization of metal oxides with aryl diazonium salts and suggest a promising surface modification approach for biomedical applications.

| S-EPMC9081548 | biostudies-literature

Hydrogenation of furfural by noble metal-free nickel modified tungsten carbide catalysts.

Project description:Nickel-tungsten carbide catalysts convert furfural to high value products in a liquid phase catalytic reaction. The product distribution depends on the solvent and the Ni-W-ratio of the catalyst. In isopropyl alcohol a combination of Ni and W x C enables the opening of the furan ring to yield 1,2-pentanediol. Nickel accelerates the tungsten oxide reduction in the tungsten carbide catalyst synthesis and facilitates the carbon insertion. Nickel modified tungsten carbide is a promising, noble metal-free catalyst system for the upgrading of furfural based renewable resources. Its preparation is facilitated compared to unmodified tungsten carbide catalysts.

| S-EPMC9055482 | biostudies-literature

Catalytic Transfer Hydrogenation and Acid Reactions of Furfural and 5-(Hydroxymethyl)furfural over Hf-TUD-1 Type Catalysts.

Project description:Heterogeneous catalysis, which has served well the petrochemical industry, may valuably contribute towards a bio-based economy by sustainably enabling selective reactions to renewable chemicals. Carbohydrate-containing matter may be obtained from various widespread sources and selectively converted to furanic platform chemicals: furfural (Fur) and 5-(hydroxymethyl)furfural (Hmf). Valuable bioproducts may be obtained from these aldehydes via catalytic transfer hydrogenation (CTH) using alcohols as H-donors under relatively moderate reaction conditions. Hafnium-containing TUD-1 type catalysts were the first of ordered mesoporous silicates explored for the conversion of Fur and Hmf via CTH/alcohol strategies. The materials promoted CTH and acid reactions leading to the furanic ethers. The bioproducts spectrum was broader for the reaction of Fur than of Hmf. A Fur reaction mechanism based on literature data was discussed and supported by kinetic modelling. The influence of the Hf loading and reaction conditions (catalyst load, type of alcohol H-donor, temperature, initial substrate concentration) on the reaction kinetics was studied. The reaction conditions were optimized to maximize the yields of 2-(alkoxymethyl)furan ethers formed from Fur; up to 63% yield was reached at 88% Fur conversion, 4 h/150 °C, using Hf-TUD-1(75), which was a stable catalyst. The Hf-TUD-1(x) catalysts promoted the selective conversion of Hmf to bis(2-alkoxymethyl)furan; e.g., 96% selectivity at 98% Hmf conversion, 3 h/170 °C for Hf-TUD-1(50).

| S-EPMC8658772 | biostudies-literature

Renewable Cyclopentanol From Catalytic Hydrogenation-Rearrangement of Biomass Furfural Over Ruthenium-Molybdenum Bimetallic Catalysts.

Project description:Biomass furfural-like compounds are chemicals that cannot be extracted from fossil materials, through which a large number of fine chemicals and fuel additives can be opened up, but one big efficiency problem during the transformation is the accumulation of oligomers. Here, we propose a novel and efficient Ru-Mo bimetallic catalyst for selective hydrogenation-rearrangement of furfural-like compounds. The result showed that an unprecedented rearrangement product selectivity of 89.1% to cyclopentanol was achieved under an optimized reaction condition over a 1%Ru-2.5%Mo/CNT catalyst reduced at 600°C. Subsequent characterization suggested that the catalyst presented with weak acidity and strong hydrogenation activity for the reaction, which not only ensures the smooth hydrogenation-rearrangement reaction but also inhibits the accumulation of furan polymers. These findings provide a convenient strategy to tune the catalytic performance of Mo-based catalysts by controlling the reduction and carburization conditions, which appear to be versatile for the rearrangement of furans and similar compounds.

| S-EPMC7775491 | biostudies-literature

Silica-Supported Au-Ag Catalysts for the Selective Hydrogenation of Butadiene.

Project description:Gold and silver are miscible over the entire composition range, and form an attractive combination for fundamental studies on bimetallic catalysts. Au-Ag catalysts have shown synergistic effects for different oxidation and liquid-phase hydrogenation reactions, but have rarely been studied for gas-phase hydrogenation. In this study 3?nm particles of Au, Ag and Au-Ag supported on silica (SBA-15) were investigated as catalysts for selective hydrogenation of butadiene in an excess of propene. The Au catalyst was over an order of magnitude more active than the Ag catalyst at 120?°C. The initial activity of the Au-Ag catalysts scaled linearly with the Au-content, suggesting a direct correlation between the surface and overall compositions of the nanoparticles and the absence of synergistic effects. All Au-containing catalysts were highly selective to butenes (>99.9?%). The Au catalysts were stable, whereas the Au-Ag catalysts lost about half of their activity during 20?h run time at 200?°C, but the initial activity was restored by a consecutive oxidation-reduction treatment. Near ambient pressure x-ray photoelectron spectroscopy showed that exposure to H2 at elevated temperatures led to a gradual enrichment of the surface of the Au-Ag nanoparticles by Ag. These observations highlight the importance of considering progressive atomic rearrangements in bimetallic nanocatalysts under reaction conditions.

| S-EPMC6099385 | biostudies-literature

Bimetallic Au-Pd alloy nanoparticles supported on MIL-101(Cr) as highly efficient catalysts for selective hydrogenation of 1,3-butadiene.

Project description:Gold-palladium (Au-Pd) bimetallic nanoparticle (NP) catalysts supported on MIL-101(Cr) with Au : Pd mole ratios ranging from 1 : 3 to 3 : 1 were prepared through coimpregnation and H2 reduction. Au-Pd NPs were homogeneously distributed on the MIL-101(Cr) with mean particle sizes of 5.6 nm. EDS and XPS analyses showed that bimetallic Au-Pd alloys were formed in the Au(2)Pd(1)/MIL-101(Cr). The catalytic performance of the catalysts was explored in the selective 1,3-butadiene hydrogenation at 30-80 °C on a continuous fixed bed flow quartz reactor. The bimetallic Au-Pd alloy particles stabilized by MIL-101(Cr) presented improved catalytic performance. The as-synthesized bimetallic Au(2)Pd(1)/MIL-101(Cr) with 2 : 1 Au : Pd mole ratio showed the best balance between the activity and butene selectivity in the selective 1,3-butadiene hydrogenation. The Au-Pd bimetallic-supported catalysts can be reused in at least three runs. The work affords a reference on the utilization of a MOF and alloy nanoparticles to develop high-efficiency catalysts.

| S-EPMC9056711 | biostudies-literature

Continuous Hydrogenation of Aqueous Furfural Using a Metal-Supported Activated Carbon Monolith.

Project description:Continuous hydrogenation of aqueous furfural (4.5%) was studied using a monolith form (ACM) of an activated carbon Pd catalyst (?1.2% Pd). A sequential reaction pathway was observed, with ACM achieving high selectivity and space time yields (STYs) for furfuryl alcohol (?25%, 60-70 g/L-cat/h, 7-15 1/h liquid hourly space velocity, LHSV), 2-methylfuran (?25%, 45-50 g/L-cat/h, 7-15 1/h LHSV), and tetrahydrofurfuryl alcohol (?20-60%, 10-50 g/L-cat/h, <7 1/h LHSV). ACM showed a low loss of activity and metal leaching over the course of the reactions and was not limited by H2 external mass transfer resistance. Acetic acid (1%) did not significantly affect furfural conversion and product yields using ACM, suggesting Pd/ACM's potential for conversion of crude furfural. Limited metal leaching combined with high metal dispersion and H2 mass transfer rates in the composite carbon catalyst (ACM) provides possible advantages over granular and powdered forms in continuous processing.

| S-EPMC7160850 | biostudies-literature

Biomass Nanoporous Carbon-Supported Pd Catalysts for Partial Hydrogenation of Biodiesel: Effects of Surface Chemistry on Pd Particle Size and Catalytic Performance.

Project description:Two types of cattail flower-derived nanoporous carbon (NPC), i.e., NPC activated with KOH and H3PO4, were produced and characterized using several techniques (e.g., Raman spectroscopy, nitrogen adsorption, and X-ray photoelectron spectroscopy). The influence of the carbon support characteristics on the particle sizes and chemical states of Pd in the synthesized Pd/NPC catalysts, which affect the catalytic activity and product selectivity, was analyzed. The surface chemistry properties of NPC were the main factors influencing the Pd particle size; by contrast, the textural properties did not significantly affect the size of the Pd particles on NPC supports. The use of Pd nanoparticles supported on the rich-functionalized surface carbons obtained by H3PO4 activation led to superior catalytic activity for the polyunsaturated fatty acid methyl ester (poly-FAME) hydrogenation, which could achieve 90% poly-FAME conversion and 84% selectivity towards monounsaturated FAME after a 45-min reaction time. This is due to the small Pd nanoparticle size and the high acidity of the catalysts, which are beneficial for the partial hydrogenation of poly-FAME in biodiesel. Conversely, the Pd nanoparticles supported on the high-surface-area carbon by KOH activation, with large Pd particle size and low acidity, required a longer reaction time to reach similar conversion and product selectivity levels.

| S-EPMC8227727 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data