Browse
Submit Data
Databases
API
Help

Dataset Information

18 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Co-Precipitation Synthesis of Co₃[Fe(CN)₆]₂·10H₂O@rGO Anode Electrode for Lithium-Ion Batteries.

ABSTRACT: Rechargeable lithium-ion batteries (LIBs) are known to be practical and cost-effective devices for storing electric energy. LIBs have a low energy density, which calls for the development of new anode materials. The Prussian blue analog (PBA) is identified as being a candidate electrode material due to its facile synthesis, open framework structures, high specific surface areas, tunable composition, designable topologies and rich redox couples. However, its poor electrical conductivity and mechanical properties are the main factors limiting its use. The present study loaded PBA (Co₃[Fe(CN)₆]·10H₂O) on graphene oxide (Co-Fe-PBA@rGO) and then conducted calcination at 300 °C under the protection of nitrogen, which reduced the crystal water and provided more ion diffusion pathways. As a result, Co-Fe-PBA@rGO showed excellent performance when utilized as an anode in LIBs, and its specific capacities were 546.3 and 333.2 mAh g^-1 at 0.1 and 1.0 A g^-1, respectively. In addition, the electrode also showed excellent performance in the long-term cycle, and its capacity reached up to 909.7 mAh g^-1 at 0.1 A g^-1 following 100 cycles.

SUBMITTER: Sun D

PROVIDER: S-EPMC9267929 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Cu3P/RGO Nanocomposite as a New Anode for Lithium-Ion Batteries.

Project description:Cu3P/reduced graphene oxide (Cu3P/RGO) nanocomposite was successfully synthesized by a facile one-pot method as an advanced anode material for high-performance lithium-ion batteries. Cu3P nanostructures with a polyhedral shape with the mean diameter (80-100?nm) were homogeneously anchored on the surface of RGO. The flexible RGO sheets acted as elastic buffering layer which not only reduced the volume change, but also prevented the aggregation of Cu3P nanostructures, the cracking and crumbing of electrodes. On the other hand, the presence of Cu3P nanostructures could also avoid the agglomeration of RGO sheets and retain their highly active surface area. Therefore, as an advanced anode material for high-performance lithium-ion batteries, the as-prepared Cu3P/RGO exhibited high capacity of 756.15?mAhg(-1) at the current density 500?mAg(-1) after 80?cycles, superior cyclic stability and good rate capability.

| S-EPMC5057080 | biostudies-other

RGO-Coated TiO2 Microcones for High-Rate Lithium-Ion Batteries.

Project description:Reduced graphene oxide (RGO)-coated TiO2 microcones have been synthesized via simple anodization and cyclic voltammetry for use in lithium-ion batteries (LIBs). Microcones had a perpendicularly oriented hollow core, an anatase structure, and a high surface area, allowing higher capacity than other nanosized TiO2 structures. TiO2 has low electrical conductivity, leading to the limitation of fast charging and high capacity; however, this was improved by the application of an RGO coating in this work. As anode materials of LIB, the obtained RGO microcone showed a capacity of 157 mAh g-1 at 10C (fully charged within ∼360 s) and sustained 1000 cycles with only 0.02% capacity fading per cycle. The capacity was 1.5 times higher than that of conventional microcone. We speculated that the decrease in the charge-transfer resistance (R ct) played a crucial role in increasing the capacity with fast charging.

| S-EPMC6644754 | biostudies-literature

MoS2@rGO Nanoflakes as High Performance Anode Materials in Sodium Ion Batteries.

Project description:A simple one-pot hydrothermal method is developed for fabrication of MoS2@rGO nanoflakes using the economical MoO3 as the molybdenum source. Benefiting from the unique nanoarchitecture, high MoS2 loading (90.3 wt%) and the expanded interlayer spacing, the as-prepared MoS2@rGO nanoflakes exhibit greatly enhanced sodium storage performances including a high reversible specific capacity of 441 mAh g-1 at a current density of 0.2 A g-1, high rate capability, and excellent capacity retention of 93.2% after 300 cycles.

| S-EPMC5554172 | biostudies-literature

KxCo1.5-0.5xFe(CN)6/rGO with Dual-Active Sodium Ion Storage Site as Superior Anode for Sodium Ion Battery.

Project description:The unique and open large frame structures of prussian blue analogues (PBA) enables it for accommodating a large number of cations (Na+, K+, Ca2+, etc.), thus, PBA are considered as promising electrode materials for the rechargeable battery. However, due to the chemical composition, there are still many alkaline metal ions in the gap within the framework, which puts multivalent metals in PBA in a low valence state and affects the sodium storage performance. To improve the valence of metal ions in PBA materials, precursors prepared by co-precipitation method and hydrothermal method are used to synthesis KxCo1.5-0.5xFe(CN)6 through further chemical oxidation. Through the introducing of reduced graphene oxide (rGO) with excellent conductivity by a simple physical mixing method, the cycle stability and rate performance of the PBA material can be further improved. The K0.5Co1.2Fe(CN)6·2H2O/rGO anode prepared with 2 h hydrothermal time and further chemical oxidation, named as KCoHCP-H2-EK/rGO, exhibits a super electrochemical performance, delivering initial charge/discharge capacities of 846.7/1445.0 mAh·g-1, and a capacity retention of 58.2% after 100 cycles at a current density of 100 mA·g-1. The KCoHCP-H2-EK/rGO outstanding electrochemical behaviors are attributed to the unique dual-active site structure properties and the improved surface conductance of materials by rGO components.

| S-EPMC9865383 | biostudies-literature

Rational Design of 3D Honeycomb-Like SnS2 Quantum Dots/rGO Composites as High-Performance Anode Materials for Lithium/Sodium-Ion Batteries.

Project description:Structure pulverization and poor electrical conductivity of metal dichalcogenides result in serious capacity decay both in lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs). To resolve the above problems, a combination of metal dichalcogenides with conductive scaffolds as high-performance electrode materials has aroused tremendous interest recently. Herein, we synthesize a 3D honeycomb-like rGO anchored with SnS2 quantum dots (3D SnS2 QDs/rGO) composite via spray-drying and sulfidation. The unique 3D-ordered honeycomb-like structure can confine the volume change of SnS2 QDs in the lithiation/delithiation and sodiation/desodiation processes, provide enough space for electrolyte reservoirs, promote the conductivity of the SnS2 QDs, and improve the electron transfer. As a result, the 3D SnS2 QDs/rGO composite electrode delivers a high capacity and long cycling stability (862 mAh/g for LIB at 0.1 A/g after 200 cycles, 233 mAh/g for SIB at 0.5 A/g after 200 cycles). This study provides a feasible synthesis route for preparing 3D-ordered porous networks in varied materials for the development of high-performance LIBs and SIBs in future.

| S-EPMC6277259 | biostudies-literature

Carbon-coated SnO2 riveted on a reduced graphene oxide composite (C@SnO2/RGO) as an anode material for lithium-ion batteries.

Project description:The research on graphene-based anode materials for high-performance lithium-ion batteries (LIBs) has been prevalent in recent years. In the present work, carbon-coated SnO2 riveted on a reduced graphene oxide sheet composite (C@SnO2/RGO) was fabricated using GO solution, SnCl4, and glucose via a hydrothermal method after heat treatment. When the composite was exploited as an anode material for LIBs, the electrodes were found to exhibit a stable reversible discharge capacity of 843 mA h g-1 at 100 mA g-1 after 100 cycles with 99.5% coulombic efficiency (CE), and a specific capacity of 485 mA h g-1 at 1000 mA g-1 after 200 cycles; these values were higher than those for a sample without glucose (SnO2/RGO) and a pure SnO2 sample. The favourable electrochemical performances of the C@SnO2/RGO electrodes may be attributed to the special double-carbon structure of the composite, which can effectively suppress the volume expansion of SnO2 nanoparticles and facilitate the transfer rates of Li+ and electrons during the charge/discharge process.

| S-EPMC8695216 | biostudies-literature

Porous Co2VO4 Nanodisk as a High-Energy and Fast-Charging Anode for Lithium-Ion Batteries.

Project description:High-energy-density lithium-ion batteries (LIBs) that can be safely fast-charged are desirable for electric vehicles. However, sub-optimal lithiation potential and low capacity of commonly used LIBs anode cause safety issues and low energy density. Here we hypothesize that a cobalt vanadate oxide, Co2VO4, can be attractive anode material for fast-charging LIBs due to its high capacity (~ 1000 mAh g-1) and safe lithiation potential (~ 0.65 V vs. Li+/Li). The Li+ diffusion coefficient of Co2VO4 is evaluated by theoretical calculation to be as high as 3.15 × 10-10 cm2 s-1, proving Co2VO4 a promising anode in fast-charging LIBs. A hexagonal porous Co2VO4 nanodisk (PCVO ND) structure is designed accordingly, featuring a high specific surface area of 74.57 m2 g-1 and numerous pores with a pore size of 14 nm. This unique structure succeeds in enhancing Li+ and electron transfer, leading to superior fast-charging performance than current commercial anodes. As a result, the PCVO ND shows a high initial reversible capacity of 911.0 mAh g-1 at 0.4 C, excellent fast-charging capacity (344.3 mAh g-1 at 10 C for 1000 cycles), outstanding long-term cycling stability (only 0.024% capacity loss per cycle at 10 C for 1000 cycles), confirming the commercial feasibility of PCVO ND in fast-charging LIBs.

| S-EPMC8639887 | biostudies-literature

Mesoporous Co3O4@CdS nanorods as anode for high-performance lithium ion batteries with improved lithium storage capacity and cycle life.

Project description:Transition metal oxides based anodes are facing crucial problems of capacity fading at long cycles and high rates due to electrode degradations. In this prospective, an effective strategy is employed to develop advanced electrode materials for lithium-ion batteries (LIBs). In the present work, a mesoporous Co3O4@CdS hybrid sructure is developed and investigated as anode for LiBs. The hybrid structure owning porous nature and large specific surface area, provides an opportunity to boost the lithium storage capabilities of Co3O4 nanorods. The Co3O4@CdS electrode delivers an initial discharge capacity of 1292 mA h g-1 at 0.1C and a very stable reversible capacity of 760 mA h g-1 over 200 cycles with a capacity retention rate of 92.7%. In addition, the electrode exhibits excellent cyclic stability even after 800 cycles and good rate performance as compared to previously reported electrodes. Moreover, density functional theory (DFT) and electrochemical impedance spectroscopy (EIS) confirm the enhanced kinetics of the Co3O4@CdS electrode. The efficient performance of the electrode may be due to the increased surface reactivity, abundant active sites/interfaces for rapid Li+ ion diffusion and the synergy between Co3O4 and CdS NPs. This work demonstrates that Co3O4@CdS hybrid structures have great potential for high performance batteries.

| S-EPMC11017193 | biostudies-literature

Synthesis and Application of Phosphorus/Co3O4-CuO Hybrid as High-Performance Anode Materials for Lithium-Ion Batteries.

Project description:The present study reports a novel red phosphorus (RP)/Co3O4-CuO hybrid as a high-performance anode material for lithium ion battery that was successfully synthesized by simple sol gel method and followed by facile ball milling of red phosphorus. Herein, we outstandingly improved practical application of RP anode (with its natural insulation property and rapid capacity decay in during the lithiation process) in lithium-ion batteries (LIBs) by confining nanosized amorphous RP into the Co3O4-CuO nanoparticle while RP can improve the electrochemical capacity returning and increased capacity of composite in high current density. This bonding can help maintain electrical contact, prevent to escape RP from the electrode and confirm the solid electrolyte interphase upon the large volume change of RP during cycling. As a result, by judicious usage of components in the RP/Co3O4-CuO hybrid nanostructured anode was achieved an initial Coulombic efficiency of 99.8% at a current density of 50 mA g-1 and an enhanced cycling stability (683.63 and 470.11 mAh g-1 after 60 cycles at a density of 0.1 and 1 A g1-) with interesting cycling capacity at high current density of 3 Ag1- (333.81 mAh g-1). Moreover, the composite electrode can still deliver a specific capacity of about 97.4% of initial capacity after cycling at high rates and returning to the initial current density of 0.1 A g1-.

| S-EPMC6641369 | biostudies-literature

Nature of Bimetallic Oxide Sb2MoO6/rGO Anode for High-Performance Potassium-Ion Batteries.

Project description:Potassium-ion batteries (KIBs) are one of the most appealing alternatives to lithium-ion batteries, particularly attractive in large-scale energy storage devices considering the more sufficient and lower cost supply of potassium resources in comparison with lithium. To achieve more competitive KIBs, it is necessary to search for anode materials with a high performance. Herein, the bimetallic oxide Sb2MoO6, with the presence of reduced graphene oxide, is reported as a high-performance anode material for KIBs in this study, achieving discharge capacities as high as 402 mAh g-1 at 100 mA g-1 and 381 mAh g-1 at 200 mA g-1, and reserving a capacity of 247 mAh g-1 after 100 cycles at a current density of 500 mA g-1. Meanwhile, the potassiation/depotassiation mechanism of this material is probed in-depth through the electrochemical characterization, operando X-ray diffraction, transmission electron microscope, and density functional theory calculation, successfully unraveling the nature of the high-performance anode and the functions of Sb and Mo in Sb2MoO6. More importantly, the phase development and bond breaking sequence of Sb2MoO6 are successfully identified, which is meaningful for the fundamental study of metal-oxide based electrode materials for KIBs.

| S-EPMC6724349 | biostudies-literature