Browse
Submit Data
Databases
API
Help

Dataset Information

26 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Visible-Light Driven Photodegradation of Industrial Pollutants Using Nitrogen-Tungsten Co-Doped Nanocrystalline TiO₂: Spectroscopic Analysis of Degradation Reaction Path.

ABSTRACT: The purpose to conduct this research work is to study the effect of photocatalytic degradation by developing cost-effective and eco-friendly nitrogen and tungsten (metal/non-metal) co-doped titania (TiO₂). The inherent characteristics of synthesized nanoparticles (NPs) were analyzed by Fourier transform infra-red spectroscopy (FT-IR), ultra-violet visible (UV-Vis) spectroscopy, Raman spectroscopy, Field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDX), dynamic light scattering (DLS), X-ray diffraction (XRD) spectrometry, and atomic force microscopy (AFM). Co-doping of metal and non-metal has intensified the photocatalysis trait of TiO₂ nanoparticles in an aqueous medium. This co-doping of transition metal ions and modification of nitrogen extended the absorption into the visible region subsequently restraining the recombination of electrons/holes pair. The stronger light absorption in the visible region was required for the higher activity of photodegradation of dye under visible light illumination to confine bandgap energy which results in accelerating the rate of photodegradation. After efficient doping, the bandgap of titania reduced to 2.38 eV and caused the photodegradation of malachite green in visible light. The results of photocatalytic degradation were confirmed by using UV/Vis. spectroscopy and high-performance liquid chromatography coupled with a mass spectrophotometer (HPLC-ESI-MS) was used for the analysis of intermediates formed during photocatalytic utility of the work.

SUBMITTER: Khursheed S

PROVIDER: S-EPMC9267965 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Co-assembled MoS2-TiO2 Inverse Opal Photocatalysts for Visible Light-Activated Pharmaceutical Photodegradation.

Project description:Heterostructured photocatalytic materials in the form of photonic crystals have been attracting attention for their unique light harvesting ability that can be ideally combined with judicious compositional modifications toward the development of visible light-activated (VLA) photonic catalysts, though practical environmental applications, such as the degradation of pharmaceutical emerging contaminants, have been rarely reported. Herein, heterostructured MoS2-TiO2 inverse opal films are introduced as highly active immobilized photocatalysts for the VLA degradation of tetracycline and ciprofloxacin broad-spectrum antibiotics as well as salicylic acid. A single-step co-assembly method was implemented for the challenging incorporation of MoS2 nanosheets into the nanocrystalline inverse opal walls. Compositional tuning and photonic band gap engineering of the MoS2-TiO2 photonic films showed that integration of low amounts of MoS2 nanosheets in the inverse opal framework maintains intact the periodic macropore structure and enhances the available surface area, resulting in efficient VLA antibiotic degradation far beyond the performance of benchmark TiO2 films. The combination of broadband MoS2 visible light absorption and photonic-assisted light trapping together with the enhanced charge separation that enables the generation of reactive oxygen species via firm interfacial coupling between MoS2 nanosheets and TiO2 nanoparticles is concluded as a competent approach for pharmaceutical abatement in water bodies.

| S-EPMC10515384 | biostudies-literature

Adsorption and visible-light photodegradation of organic dyes with TiO2/conjugated microporous polymer composites.

Project description:A series of composite materials made of TiO2 and conjugated microporous polymers (CMPs) were prepared with a hydrothermal method and used as both adsorbents and photocatalysts for the adsorption and visible-light photodegradation of organic dyes in aqueous solutions. It is found that the blending of CMPs can significantly improve both the adsorption capacity and the photocatalytic degradation activity of TiO2 towards organic dyes.

| S-EPMC9086925 | biostudies-literature

Mechanism of Photodegradation of Organic Pollutants in Seawater by TiO2-Based Photocatalysts and Improvement in Their Performance.

Project description:The mechanism of photodegradation of organic pollutants in seawater by TiO2-based catalysts irradiated by visible light was first explored by adding holes and free radical traps. The results showed that the photogenerated holes formed by the catalyst played a key role in the degradation of organic pollutants, regardless of whether the photodegradation occurred in seawater or pure water. Considering that the Yb-TiO2-rGO catalyst has a strong adsorption for organics, the salt ion almost did not interfere with the adsorption of pollutants by Yb-TiO2-rGO. Therefore, the degradation performance of Yb-TiO2-rGO did not remarkably change in the two water systems. For P25-ZN with a weak adsorption capacity for organics, several salt ions in the seawater hindered the contact of pollutants with the catalyst surface. Thus, the degradation rate of P25-ZN for phenol was significantly reduced. After the solvothermal reduction treatment for catalysts using ethylene glycol (EG) as the solvent, the increase in the Ti3+ content in the catalyst improved the visible-light response and activity of the catalyst. In addition, a small amount of EG grafted on the catalyst surface promoted the photocatalytic reaction process on the catalyst surface, thereby effectively resisting the interference of salt ions.

| S-EPMC8600626 | biostudies-literature

Photodegradation of organic pollutants RhB dye using UV simulated sunlight on ceria based TiO2 nanomaterials for antibacterial applications.

Project description:To photo-catalytically degrade RhB dye using solar irradiation, CeO2 doped TiO2 nanocomposites were synthesized hydrothermally at 700 °C for 9 hrs. All emission spectra showed a prominent band centered at 442 nm that was attributed to oxygen related defects in the CeO2-TiO2 nanocrystals. Two sharp absorption bands at 1418 cm-1 and 3323 cm-1 were attributed to the deformation and stretching vibration, and bending vibration of the OH group of water physisorbed to TiO2, respectively. The photocatalytic activities of Ce-TiO2 nanocrystals were investigated through the degradation of RhB under UV and UV+ visible light over a period of 8 hrs. After 8 hrs, the most intense absorption peak at 579 nm disappeared under the highest photocatalytic activity and 99.89% of RhB degraded under solar irradiation. Visible light-activated TiO2 could be prepared from metal-ion incorporation, reduction of TiO2, non-metal doping or sensitizing of TiO2 using dyes. Studying the antibacterial activity of Ce-TiO2 nanocrystals against E. coli revealed significant activity when 10 μg was used, suggesting that it can be used as an antibacterial agent. Its effectiveness is likely related to its strong oxidation activity and superhydrophilicity. This study also discusses the mechanism of heterogeneous photocatalysis in the presence of TiO2.

| S-EPMC5128916 | biostudies-literature

Hierarchical Bi2WO6/TiO2-nanotube composites derived from natural cellulose for visible-light photocatalytic treatment of pollutants.

Project description:A series of Bi2WO6/TiO2-nanotube (Bi2WO6/TiO2-NT) heterostructured composites were prepared by utilizing natural cellulose (e.g., laboratory filter paper) as the structural template. The obtained nanoarchitectonics, namely Bi2WO6/TiO2-NT nanocomposites, displayed three-dimensionally interwoven structures which replicated the initial cellulose template. The composite Bi2WO6/TiO2-NT nanotubes were formed by TiO2 nanotubes that uniformly anchored with Bi2WO6 nanoparticles of various densities on the surface. The composites exhibited improved photocatalytic activities toward the reduction of Cr(VI) and degradation of rhodamine B under visible light (λ > 420 nm), which were attributed to the uniform anchoring of Bi2WO6 nanoparticles on TiO2 nanotubes, as well as strong mutual effects and well-proportioned formation of heterostructures in between the Bi2WO6 and TiO2 phases. These improvements arose from the cellulose-derived unique structures, leading to an enhanced absorption of visible light together with an accelerated separation and transfer of the photogenerated electron-hole pairs of the nanocomposites, which resulted in increased effective amounts of photogenerated carriers for the photocatalytic reactions. It was demonstrated that the photoinduced electrons dominated the photocatalytic reduction of Cr(VI), while hydroxyl radicals and reactive holes contributed to the photocatalytic degradation of rhodamine B.

| S-EPMC9359189 | biostudies-literature

Selective growth of Ti3+/TiO2/CNT and Ti3+/TiO2/C nanocomposite for enhanced visible-light utilization to degrade organic pollutants by lowering TiO2-bandgap.

Project description:A convenient route was developed for the selective preparation of two stable nanocomposites, Ti3+/TiO2/CNT (labeled as TTOC-1 and TTOC-3) and Ti3+/TiO2/carbon layer (labeled as TTOC-2), from the same precursor by varying the amount of single-walled carbon nanotubes used in the synthesis. TiO2 is an effective photocatalyst; however, its wide bandgap limits its usefulness to the UV region. As a solution to this problem, our prepared nanocomposites exhibit a small bandgap and wide visible-light (VL) absorption because of the introduction of carbonaceous species and Ti3+ vacancies. The photocatalytic efficiency of the nanocomposites was examined via the degradation of methylene blue dye under VL. Excellent photocatalytic activity of 83%, 98%, and 93% was observed for TTOC-1, TTOC-2, and TTOC-3 nanocomposites within 25 min. In addition, the photocatalytic degradation efficiency of TTOC-2 toward methyl orange, phenol, rhodamine B, and congo red was 28%, 69%, 71%, and 91%, respectively, under similar experimental conditions after 25 min. Higher reusability and structural integrity of the as-synthesized photocatalyst were confirmed within five consecutive runs by photocatalytic test and X-ray diffraction analysis, respectively. The resulting nanocomposites provide new insights into the development of VL-active and stable photocatalysts with high efficiencies.

| S-EPMC8096813 | biostudies-literature

Boosted Visible-Light Photodegradation of Methylene Blue by V and Co Co-Doped TiO₂.

Project description:In this work, TiO₂ photocatalysts, co-doped with transition metal ions vanadium (V) and cobalt (Co) ((V,Co)⁻TiO₂), were synthesized by the sol⁻gel method. The synthesized photocatalysts were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), nitrogen adsorption and desorption measurement, UV-Vis absorption and photoluminescence spectrum (PL) spectra. The results show that V and Co co-doping has significant effects on sample average crystalline grain size, absorption spectrum, recombination efficiency of photo-induced electron-hole pairs (EHPs), and photocatalytic degradation efficiency of methylene blue (MB). (V,Co)⁻TiO₂ photocatalyst exhibits an obvious red shift of the absorption edge to 475 nm. Photocatalytic degradation rate of (V,Co)⁻TiO₂ sample for MB in 60 min is 92.12% under a Xe lamp with a cut-off filter (λ > 400 nm), which is significantly higher than 56.55% of P25 under the same conditions. The first principles calculation results show that V and Co ions doping introduces several impurity energy levels, which can modulate the location of the valence band and conduction band. An obvious lattice distortion is produced in the meantime, resulting in the decrease in photo-generated EHP recombination. Thus, (V,Co)⁻TiO₂ photocatalyst performance is significantly improved.

| S-EPMC6213182 | biostudies-literature

Polymorphism of nanocrystalline TiO2 prepared in a stagnation flame: formation of the TiO2-II phase.

Project description:A metastable "high-pressure" phase known as α-PbO2-type TiO2 or TiO2-II is prepared via a single-step synthesis using a laminar premixed stagnation flame. Three other TiO2 polymorphs, namely anatase, rutile and TiO2-B phases, can also be obtained by tuning the oxygen/fuel ratio. TiO2-II is observed as a mixture with rutile under oxygen-lean flame conditions. To the best of our knowledge, this is the first time that this phase has been identified in flame-synthesised TiO2. The formation of TiO2-II in an atmospheric pressure flame cannot be explained thermodynamically and is hypothesised to be kinetically driven through the oxidation and solid-state transformation of a sub-oxide TiO2-x intermediate. In this scenario, rutile is nucleated from the metastable TiO2-II phase instead of directly from a molten/amorphous state. Mixtures containing three-phase heterojunctions of anatase, rutile, and TiO2-II nanoparticles as prepared here in slightly oxygen-lean flames might be important in photocatalysis due to enhanced electron-hole separation.

| S-EPMC6354738 | biostudies-literature

Photodegradation of naphthalene over Fe3O4 under visible light irradiation.

Project description:Using FeCl3 and FeSO4 as precursors, Fe3O4 were prepared by co-precipitation method via FeCl3 and FeSO4 aqueous solutions successively added to NaOH solution. The sample was proved by X-ray powder diffraction, transmission electron microscope, ultraviolet-visible spectrophotometry and magnetic measurement. The results showed that the prepared Fe3O4 material was composed of an average diameter of about 15 nm particles and nano rods with well-crystallized magnetite and stronger superparamagnetic, getting a saturation magnetization of 49.5 emu g-1. This Fe3O4 material was found to be an effective catalyst for photodegradation of naphthalene with or without H2O2 under visible light irradiation, getting 81.1% and 74.3% degradation rate in these two cases, respectively. The degradation pathway in the absence and presence of H2O2 was analysed via measurement of the distribution of degradation products by GC-MS and adsorption of reactants on the surface of the catalyst by in situ DRIFTS spectra.

| S-EPMC6366235 | biostudies-literature

TiO2 metasurfaces: From visible planar photonics to photochemistry.

Project description:TiO2 metasurfaces have been intensively studied in the past few years. To date, the TiO2 metadevices only used their high reflective index (n). The controllable light extinction coefficient (k) of TiO2 has not been exploited yet. Here, we converted TiO2 metasurfaces to black TiO2 metasurfaces and explored their new opportunities in photochemistry. A complementary metal oxide semiconductor (CMOS)-compatible technique has been developed to reversibly and precisely control the absorption of TiO2 metasurfaces without spoiling their internal nanostructures. Consequently, two types of black TiO2 metasurfaces were realized for photochemical experiments. The metasurface with an ultrawide absorption band can substantially enhance the white light absorption and accelerate the solar-based photochemistry process by a factor of 18.7. The other metasurface with an absorption band of <20 nm only responded to the resonant wavelengths, making the photochemistry process capable of being monitored in real time. In addition, the reversible switch between normal and black states makes TiO2 metasurfaces suitable for dynamic metadevices as well.

| S-EPMC6824849 | biostudies-literature