Browse
Submit Data
Databases
API
Help

Dataset Information

22 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Carbon nanoparticle-entrapped macroporous Mn3O4 microsphere anodes with improved cycling stability for Li-ion batteries

ABSTRACT: Manganese oxide (Mn3O4) has garnered substantial attention as a low-cost, environment-friendly anode material. It undergoes a conversion reaction involving the formation of Li2O and metallic Mn to provide high-energy Li-ion batteries. However, its low electrical conductivity and significant volume change reduce its capacity during the initial lithiation/delithiation, hindering its practical application. To improve the cycle performance, we propose a new composite structure wherein we entrap carbon nanoparticles in macroporous Mn3O4 microspheres with a unique maze-like porous interior. We fabricate the Mn3O4/C composites using a scalable two-step process involving the thermal decomposition of MnCO3 in water vapor and mixing in a carbon-dispersed solution. The fabricated Mn3O4/C composites with varying carbon contents exhibit a high maximum discharge capacity retention of 86% after 50 cycles, compared to the 18% given by bare Mn3O4. The entrapped carbon nanoparticles improve the cycle performance both electrochemically and physically. The microstructure of the composite particles and the fabrication process developed in this study will help improve the performance of other conversion-type anode materials that suffer from cycle degradation, including inexpensive transition metal oxides and sulfides.

SUBMITTER: Kozawa T

PROVIDER: S-EPMC9283411 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Cycling Stability of Lithium-Ion Batteries Based on Fe-Ti-Doped LiNi0.5 Mn1.5 O4 Cathodes, Graphite Anodes, and the Cathode-Additive Li3 PO4.

Project description:This study addresses the improved cycling stability of Li-ion batteries based on Fe-Ti-doped LiNi0.5 Mn1.5 O4 (LNMO) high-voltage cathode active material and graphite anodes. By using 1 wt% Li3 PO4 as cathode additive, over 90% capacity retention for 1000 charge-discharge cycles and remaining capacities of 109 mAh g-1 are reached in a cell with an areal capacity of 2.3 mAh cm- 2 (potential range: 3.5-4.9 V). Cells without the additive, in contrast, suffer from accelerated capacity loss and increase polarization, resulting in capacity retention of only 78% over 1000 cycles. An electrolyte consisting of ethylene carbonate, dimethyl carbonate, and LiPF6 is used without additional additives. The significantly improved cycling stability of the full cells is mainly due to two factors, namely, the low MnIII content of the Fe-Ti-doped LNMO active material and the use of the cathode-additive Li3 PO4 . Crystalline Li3 PO4 yields a drastic reduction of transition metal deposition on the graphite anode and prevents Li loss and the propagation of cell polarization. Li3 PO4 is added to the cathode slurry that makes it a very simple and scalable process, first reported herein. The positive effects of crystalline Li3 PO4 as electrode additive, however, should apply to other cell chemistries as well.

| S-EPMC10460850 | biostudies-literature

Nanoscale Heterogeneity of Multilayered Si Anodes with Embedded Nanoparticle Scaffolds for Li-Ion Batteries.

Project description:A new approach on the synthesis of Si anodes for Li-ion batteries is reported, combining advantages of both nanoparticulated and continuous Si films. A multilayered configuration prototype is proposed, comprising amorphous Si arranged in nanostructured, mechanically heterogeneous films, interspersed with Ta nanoparticle scaffolds. Particular structural features such as increased surface roughness, nanogranularity, and porosity are dictated by the nanoparticle scaffolds, boosting the lithiation process due to fast Li diffusion and low electrode polarization. Consequently, a remarkable charge/discharge speed is reached with the proposed anode, in the order of minutes (1200 mAh g-1 at 10 C). Moreover, nanomechanical heterogeneity self-limits the capacity at intermediate charge/discharge rates; as a consequence, exceptional cycleability is observed at 0.5 C, with 100% retention over 200 cycles with 700 mAh g-1. Higher capacity can be obtained when the first cycles are performed at 0.2 C, due to the formation of microislands, which facilitate the swelling of the active Si. This study indicates a method to tune the mechanical, morphological, and electrochemical properties of Si electrodes via engineering nanoparticle scaffolds, paving the way for a novel design of nanostructured Si electrodes for high-performance energy storage devices.

| S-EPMC5644243 | biostudies-literature

Wire-in-Wire TiO2/C Nanofibers Free-Standing Anodes for Li-Ion and K-Ion Batteries with Long Cycling Stability and High Capacity.

Project description:Wearable and portable mobile phones play a critical role in the market, and one of the key technologies is the flexible electrode with high specific capacity and excellent mechanical flexibility. Herein, a wire-in-wire TiO2/C nanofibers (TiO2 ww/CN) film is synthesized via electrospinning with selenium as a structural inducer. The interconnected carbon network and unique wire-in-wire nanostructure cannot only improve electronic conductivity and induce effective charge transports, but also bring a superior mechanic flexibility. Ultimately, TiO2 ww/CN film shows outstanding electrochemical performance as free-standing electrodes in Li/K ion batteries. It shows a discharge capacity as high as 303 mAh g-1 at 5 A g-1 after 6000 cycles in Li half-cells, and the unique structure is well-reserved after long-term cycling. Moreover, even TiO2 has a large diffusion barrier of K+, TiO2 ww/CN film demonstrates excellent performance (259 mAh g-1 at 0.05 A g-1 after 1000 cycles) in K half-cells owing to extraordinary pseudocapacitive contribution. The Li/K full cells consisted of TiO2 ww/CN film anode and LiFePO4/Perylene-3,4,9,10-tetracarboxylic dianhydride cathode possess outstanding cycling stability and demonstrate practical application from lighting at least 19 LEDs. It is, therefore, expected that this material will find broad applications in portable and wearable Li/K-ion batteries.

| S-EPMC8035377 | biostudies-literature

Exploring the potential of MB2 MBene family as promising anodes for Li-ion batteries.

Project description:In recent years, finding high-performance energy storage materials has become a major challenge for Li-ion batteries. B-based two-dimensional materials have become the focus of attention because of their abundant reserves and non-toxic characteristics. A series of two-dimensional transition metal borides (MBenes) are reported and their electrochemical properties as anode materials for Li-ion batteries are investigated by density functional theory (DFT) calculations. The surface of MB2 possesses medium adsorption strength and diffusion energy barrier for Li atoms, which are conducive to the insertion and extraction of Li-ions during the charge/discharge process of Li-ion batteries. Herein, we explore the potential of MB2 (M = Sc, Y, Ti, Zr, Hf, V, Nb, Ta, Cr, Mo, W, Mn, Fe, Co, Ni, Cu and Zn) as the anode material for LIBs. Excitingly, the Li atom can be stably adsorbed on the surface of MB2 (M = Sc, Ti, V, Nb, Mo, W) monolayers, and the theoretical capacity of the MB2 monolayer is high (521.77-1610.20 mA h g-1). The average open circuit voltage range is within 0.10-1.00 V (vs. Li/Li+). The relationship between the p-band center of the B atom and the adsorption energy of Li on the surface of MB2 is also investigated. Furthermore, it is found that the charge transfer of Li atom and metallic center in the most stable position is strongly related to the corresponding value of diffusion energy barrier. These results confirm that MB2 monolayers are promising 2D anode materials for Li-ion batteries, demonstrating the application prospects of B-based 2D materials.

| S-EPMC10999910 | biostudies-literature

Temperature-Controlled Synthesis of Li- and Mn-Rich Li1.2Mn0.54Ni0.13Co0.13O2 Hollow Nano/Sub-Microsphere Electrodes for High-Performance Lithium-Ion Battery.

Project description:The calcination temperature plays a significant role in the structural, textural, and energy-storage performance of metal oxide nanomaterials in Li-ion battery application. Here, we report the formation of well-crystallized homogeneously dispersed Li1.2Mn0.54Ni0.13Co0.13O2 hollow nano/sub-microsphere architectures through a simple cost-effective coprecipitation and chemical mixing route without surface modification for improving the efficiency of energy storage devices. The synthesized Li1.2Mn0.54Ni0.13Co0.13O2 hollow nano/sub-microsphere cathode materials are calcined at 800, 900, 950, and 1000 °C. Among them, Li1.2Mn0.54Ni0.13Co0.13O2 calcined at 950 °C exhibits a high discharge capacity (277 mAh g-1 at 0.1C rate) and excellent capacity retention (88%) after 50 cycles and also delivers an excellent discharge capacity of >172 mAh g-1 at 5C rate. Good electrochemical performance of Li1.2Mn0.54Ni0.13Co0.13O2-950 is directly related to the optimized size of its primary particles (85 nm) (which constitute the spherical secondary particle, ∼720 nm) and homogeneous cation mixing. Higher calcination temperature (≥950 °C) leads to an increase of the primary particle size, poor cycling stability, and inferior rate capacity of Li1.2Mn0.54Ni0.13Co0.13O2 due to smashing of quasi-hollow spheres upon repeated lithium ion intercalations/deintercalations. Therefore, Li1.2Mn0.54Ni0.13Co0.13O2-950 is a promising electrode for the next-generation high-voltage and high-capacity Li-ion battery application.

| S-EPMC6893958 | biostudies-literature

Three-dimensional macroporous graphene monoliths with entrapped MoS2 nanoflakes from single-step synthesis for high-performance sodium-ion batteries.

Project description:Layered metal sulfides (MoS2, WS2, SnS2, and SnS) offer high potential as advanced anode materials in sodium ion batteries upon integration with highly-conductive graphene materials. However, in addition to being costly and time-consuming, existing strategies for synthesizing sulfides/graphene composites often involve complicated procedures. It is therefore essential to develop a simple yet scalable pathway to construct sulfide/graphene composites for practical applications. Here, we highlight a one-step, template-free, high-throughput "self-bubbling" method for producing MoS2/graphene composites, which is suitable for large-scale production of sulfide/graphene composites. The final product featured MoS2 nanoflakes distributed in three-dimensional macroporous monolithic graphene. Moreover, this unique MoS2/graphene composite achieved remarkable electrochemical performance when being applied to Na-ion battery anodes; namely, excellent cycling stability (474 mA h g-1 at 0.1 A g-1 after 100 cycles) and high rate capability (406 mA h g-1 at 0.25 A g-1 and 359 mA h g-1 at 0.5 A g-1). This self-bubbling approach should be applicable to delivering other graphene-based composites for emerging applications such as energy storage, catalysis, and sensing.

| S-EPMC9077459 | biostudies-literature

Bio-Derived, Binderless, Hierarchically Porous Carbon Anodes for Li-ion Batteries.

Project description:Here we explore the electrochemical performance of pyrolyzed skins from the species A. bisporus, also known as the Portobello mushroom, as free-standing, binder-free, and current collector-free Li-ion battery anodes. At temperatures above 900 °C, the biomass-derived carbon nanoribbon-like architectures undergo unique processes to become hierarchically porous. During heat-treatment, the oxygen and heteroatom-rich organics and potassium compounds naturally present in the mushroom skins play a mutual role in creating inner void spaces throughout the resulting carbon nanoribbons, which is a process analogous to KOH-activation of carbon materials seen in literature. The pores formed in the pyrolytic carbon nanoribbons range in size from sub-nanometer to tens of nanometers, making the nanoribbons micro, meso, and macroporous. Detailed studies were conducted on the carbon nanoribbons using SEM and TEM to study morphology, as well as XRD and EDS to study composition. The self-supporting nanoribbon anodes demonstrate significant capacity increase as they undergo additional charge/discharge cycles. After a pyrolysis temperature of 1100 °C, the pristine anodes achieve over 260 mAh/g after 700 cycles and a Coulombic efficiency of 101.1%, without the use of harmful solvents or chemical activation agents.

| S-EPMC4586494 | biostudies-other

Evolution of Reduced Graphene Oxide-SnS2 Hybrid Nanoparticle Electrodes in Li-Ion Batteries.

Project description:Hybrid nanomaterials where active battery nanoparticles are synthesized directly onto conductive additives such as graphene hold the promise of improving the cyclability and energy density of conversion and alloying type Li-ion battery electrodes. Here we investigate the evolution of hybrid reduced graphene oxide-tin sulfide (rGO-SnS2) electrodes during battery cycling. These hybrid nanoparticles are synthesized by a one-step solvothermal microwave reaction which allows for simultaneous synthesis of the SnS2 nanocrystals and reduction of GO. Despite the hybrid architecture of these electrodes, electrochemical impedance spectroscopy shows that the impedance doubles in about 25 cycles and subsequently gradually increases, which may be caused by an irreversible surface passivation of rGO by sulfur enriched conversion products. This surface passivation is further confirmed by post-mortem Raman spectroscopy of the electrodes, which no longer detects rGO peaks after 100 cycles. Moreover, galvanostatic intermittent titration analysis during the 1st and 100th cycles shows a drop in Li-ion diffusion coefficient of over an order of magnitude. Despite reports of excellent cycling performance of hybrid nanomaterials, our work indicates that in certain electrode systems, it is still critical to further address passivation and charge transport issues between the active phase and the conductive additive in order to retain high energy density and cycling performance.

| S-EPMC5547442 | biostudies-literature

Optimized Morphology and Tuning the Mn3+ Content of LiNi0.5Mn1.5O4 Cathode Material for Li-Ion Batteries.

Project description:The advantages of cobalt-free, high specific capacity, high operating voltage, low cost, and environmental friendliness of spinel LiNi0.5Mn1.5O4 (LNMO) material make it one of the most promising cathode materials for next-generation lithium-ion batteries. The disproportionation reaction of Mn3+ leads to Jahn-Teller distortion, which is the key issue in reducing the crystal structure stability and limiting the electrochemical stability of the material. In this work, single-crystal LNMO was synthesized successfully by the sol-gel method. The morphology and the Mn3+ content of the as-prepared LNMO were tuned by altering the synthesis temperature. The results demonstrated that the LNMO_110 material exhibited the most uniform particle distribution as well as the presence of the lowest concentration of Mn3+, which was beneficial to ion diffusion and electronic conductivity. As a result, this LNMO cathode material had an optimized electrochemical rate performance of 105.6 mAh g-1 at 1 C and cycling stability of 116.8 mAh g-1 at 0.1 C after 100 cycles.

| S-EPMC10142292 | biostudies-literature

Controlling Li Dendritic Growth in Graphite Anodes by Potassium Electrolyte Additives for Li-Ion Batteries.

Project description:Fast charging promotes Li dendrite formation and its growth on graphite anodes, which affects cell performance in Li-ion batteries (LIBs). This work reports the formation of a robust SEI layer by introducing a KPF6 inorganic additive into the electrolyte. An optimal concentration of 0.001 M KPF6 effectively inhibits the growth of Li dendrites at 2C charging rates, compared with a commercial electrolyte. Electrolytes containing a KPF6 additive are shown here to deliver dual effects to mitigate the growth of dendrites. A thin LiF-rich SEI layer is formed on graphite, which blocks the electron leakage pathways. Additionally, K+ resides at defect sites (such as particle boundaries) due to its faster diffusion rate and blocks the incoming Li+ and restricts the growth of Li dendrites. The electrolyte with optimum concentration of KPF6, i.e., 0.001 M, effectively directs Li+ transport through the thin, durable, and low resistance LiF-rich SEI layer. This has implications for fast charging through optimization of the electrode/electrolyte interphase by controlling additive concentrations.

| S-EPMC9501903 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data