High-Throughput Discovery of a Rhombohedral Twelve-Connected Zirconium-Based Metal-Organic Framework with Ordered Terephthalate and Fumarate Linkers.
Ontology highlight
ABSTRACT:
SUBMITTER: Tollitt AM
PROVIDER: S-EPMC9299659 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:In this study, a novel porous hybrid material, poly(lauryl methacrylate) polymer-grafted UiO-66-NH2 (UiO = University of Oslo), was synthesized for efficient extraction of polycyclic aromatic hydrocarbons (PAHs) from aqueous samples. The polymer end-tethered covalently to the MOF's surface was synthesized by surface-initiated atom transfer radical polymerization, revealing a distinct type of morphology. The adsorbent was characterized by scanning electron microscopy, energy-dispersive spectroscopy, transmission electron microscopy, powder X-ray diffraction, N2 adsorption-desorption analysis, Fourier transform infrared spectroscopy, and thermogravimetric analysis. The analyses were carried out by gas chromatography-mass spectrometry. Parameters including the type and volume of the eluent, the amount of the adsorbent, and adsorption and desorption times were investigated and optimized. Under optimal conditions, the limit of detection, intraday precision, and interday precision were in the range of 3-8 ng L-1, 1.4-3.1, and 4.1-6.5%, respectively. The procedure was used for analysis of PAHs from natural water samples.
| S-EPMC7271357 | biostudies-literature
Project description:Platelets of ?-zirconium phosphate (?-ZrP) obtained from the reflux method in H3PO4 are successfully exfoliated into water via the intercalation of alkanol amines. With volume fractions greater than 0.02 they are stacked into tactoids of few layers with a repeat distance in the order of 10?nm. The tactoids align into nematic liquid crystalline phases with irregularly wide interstices of empty liquid. Colloidal processing involves the freeze-drying of such anisotropic fluids and the dispersion of the restacked tacoids into aqueous dispersions of colloidal polymer particles of largely varying size which occupy the otherwise empty liquid between the ?-ZrP tactoids and induce piling of the tactoids into columns. Real-time SAXS on drying films and TEM of the obtained coatings demonstrate that the stacked ?-ZrP platelets and the polymer particles comprising liquid dry separately without polymer intercalation, while the morphology of the obtained composites can be tuned primarily by the size of the polymer colloids. Concomitant ?-ZrP hydrolysis in the exfoliation step is scrutinized as a function of amine basicity and temperature. The role of zirconium based hydrolysis products in the hierarchical ?-ZrP assembly is indirectly though consistently confirmed by opposing impacts of ultra-filtration and added oxoanions on the platelets' spacing, smoothness and aggregation. HAADF-TEM imaging of scattered, singular platelets and XRD peak analysis of the pristine solid shed light on the ?-ZrP synthesis. Coexisting flakes and lacunae, both similar in size to the intra-layer crystal domains, suggest the stitching of proto-?-ZrP flakes into extended layers in accordance with our observations on the aging behaviour of ?-ZrP dispersions as well as with literature data on related systems.
| S-EPMC6841702 | biostudies-literature
Project description:BACKGROUND:Connected health (CH), as a new paradigm, manages individual and community health in a holistic manner by leveraging a variety of technologies and has the potential for the incorporation of telehealth and integrated care services, covering the whole spectrum of health-related services addressing healthy subjects and chronic patients. The reorganization of services around the person or citizen has been expected to bring high impact in the health care domain. There are a series of concerns (eg, contextual factors influencing the impact of care models, the cost savings associated with CH solutions, and the sustainability of the CH ecosystem) that should be better addressed for CH technologies to reach stakeholders more successfully. Overall, there is a need to effectively establish an understanding of the concepts of CH impact. As services based on CH technologies go beyond standard clinical interventions and assessments of medical devices or medical treatments, the need for standardization and for new ways of measurements and assessments emerges when studying CH impact. OBJECTIVE:This study aimed to introduce the CH impact framework (CHIF) that serves as an approach to assess the impact of CH services. METHODS:This study focused on the subset of CH comprising services that directly address patients and citizens on the management of disease or health and wellness. The CHIF was developed through a multistep procedure and various activities. These included, as initial steps, a literature review and workshop focusing on knowledge elicitation around CH concepts. Then followed the development of the initial version of the framework, refining of the framework with the experts as a result of the second workshop, and, finally, composition and deployment of a questionnaire for preliminary feedback from early-stage researchers in the relevant domains. RESULTS:The framework contributes to a better understanding of what is CH impact and analyzes the factors toward achieving it. CHIF elaborates on how to assess impact in CH services. These aspects can contribute to an impact-aware design of CH services. It can also contribute to a comparison of CH services and further knowledge of the domain. The CHIF is based on 4 concepts, including CH system and service outline, CH system end users, CH outcomes, and factors toward achieving CH impact. The framework is visualized as an ontological model. CONCLUSIONS:The CHIF is an initial step toward identifying methodologies to objectively measure CH impact while recognizing its multiple dimensions and scales.
| S-EPMC6751095 | biostudies-literature
Project description:A highly-ordered 3D covalent fullerene framework is presented with a structure based on octahedrally functionalized fullerene building blocks in which every fullerene is separated from the next by six functional groups and whose mesoporosity is controlled by cooperative self-assembly with a liquid-crystalline block copolymer. The new fullerene-framework material was obtained in the form of supported films by spin coating the synthesis solution directly on glass or silicon substrates, followed by a heat treatment. The fullerene building blocks coassemble with a liquid-crystalline block copolymer to produce a highly ordered covalent fullerene framework with orthorhombic Fmmm symmetry, accessible 7.5?nm pores, and high surface area, as revealed by gas adsorption, NMR spectroscopy, small-angle X-ray scattering (SAXS), and TEM. We also note that the 3D covalent fullerene framework exhibits a dielectric constant significantly lower than that of the nonporous precursor material.
| S-EPMC4510781 | biostudies-literature
Project description:A reproducible formation of strongly bent crystals was accomplished by structurally restraining macrocyclic ?-conjugated molecules. The model ?-units consist of two 9,10-bis(2-thienylethynyl)anthracenes with a strong propensity for stacking, which are connected in a macrocyclic fashion via two alkylene linkers. The correlation between the crystalline morphology and the macrocyclic structures restrained by a variety of flexible alkylene linker combinations was systematically studied. Bent crystals were obtained only with specific alkylene linkers of appropriate chain length. The alkylene linkers can adopt different conformations in the crystal packing, so as to fill voids within the macrocycle. The ability to form several similar molecular structures with different alkylene conformations gives rise to contaminations of different crystalline phases within a single crystal, and it is these phase contaminations which are responsible for the bending of the crystals.
| S-EPMC5645777 | biostudies-literature
Project description:Engendering electrical conductivity in high-porosity metal-organic frameworks (MOFs) promises to unlock the full potential of MOFs for electrical energy storage, electrocatalysis, or integration of MOFs with conventional electronic materials. Here we report that a porous zirconium-node-containing MOF, NU-901, can be rendered electronically conductive by physically encapsulating C60, an excellent electron acceptor, within a fraction (ca. 60%) of the diamond-shaped cavities of the MOF. The cavities are defined by node-connected tetra-phenyl-carboxylated pyrene linkers, i.e. species that are excellent electron donors. The bulk electrical conductivity of the MOF is shown to increase from immeasurably low to 10-3 S cm-1, following fullerene incorporation. The observed conductivity originates from electron donor-acceptor interactions, i.e. charge-transfer interactions - a conclusion that is supported by density functional theory calculations and by the observation of a charge-transfer-derived band in the electronic absorption spectrum of the hybrid material. Notably, the conductive version of the MOF retains substantial nanoscale porosity and continues to display a sizable internal surface area, suggesting potential future applications that capitalize on the ability of the material to sorb molecular species.
| S-EPMC5956983 | biostudies-literature
Project description:The nature of magnetic correlation at low temperature in two-dimensional artificial magnetic honeycomb lattice is a strongly debated issue. While theoretical researches suggest that the system will develop a novel zero entropy spin solid state as T ? 0 K, a confirmation to this effect in artificial honeycomb lattice of connected elements is lacking. This study reports on the investigation of magnetic correlation in newly designed artificial permalloy honeycomb lattice of ultrasmall elements, with a typical length of ?12 nm, using neutron scattering measurements and temperature-dependent micromagnetic simulations. Numerical modeling of the polarized neutron reflectometry data elucidates the temperature-dependent evolution of spin correlation in this system. As temperature reduces to ?7 K, the system tends to develop novel spin solid state, manifested by the alternating distribution of magnetic vortex loops of opposite chiralities. Experimental results are complemented by temperature-dependent micromagnetic simulations that confirm the dominance of spin solid state over local magnetic charge ordered state in the artificial honeycomb lattice with connected elements. These results enable a direct investigation of novel spin solid correlation in the connected honeycomb geometry of 2D artificial structure.
| S-EPMC5908362 | biostudies-literature
Project description:Proton conductive materials are of significant importance and highly desired for clean energy-related applications. Discovery of practical metal-organic frameworks (MOFs) with high proton conduction remains a challenge due to the use of toxic chemicals, inconvenient ligand preparation and complication of production at scale for the state-of-the-art candidates. Herein, we report a zirconium-MOF, MIP-202(Zr), constructed from natural ?-amino acid showing a high and steady proton conductivity of 0.011?S?cm-1 at 363?K and under 95% relative humidity. This MOF features a cost-effective, green and scalable preparation with a very high space-time yield above 7000?kg?m-3 day-1. It exhibits a good chemical stability under various conditions, including solutions of wide pH range and boiling water. Finally, a comprehensive molecular simulation was carried out to shed light on the proton conduction mechanism. All together these features make MIP-202(Zr) one of the most promising candidates to approach the commercial benchmark Nafion.
| S-EPMC6250719 | biostudies-literature
Project description:With the aim to develop new σ2 receptor ligands, spirocyclic piperidines or cyclohexanamines with 2-benzopyran and 2-benzofuran scaffolds were connected to the 6,7-dimethoxy-1,2,3,4-tetrahydroisoquinoline moiety by variable linkers. In addition to flexible alkyl chains, linkers containing an amide as functional group were synthesized. The 2-benzopyran and 2-benzofuran scaffold of the spirocyclic compounds were synthesized from 2-bromobenzaldehyde. The amide linkers were constructed by acylation of amines with chloroacetyl chloride and subsequent nucleophilic substitution, the alkyl linkers were obtained by LiAlH4 reduction of the corresponding amides. For the development of σ2 receptor ligands, the spirocyclic 2-benzopyran scaffold is more favorable than the ring-contracted 2-benzofuran system. Compounds bearing an alkyl chain as linker generally show higher σ affinity than acyl linkers containing an amide as functional group. A higher σ1 affinity for the cis-configured cyclohexanamines than for the trans-configured derivatives was found. The highest σ2 affinity was observed for cis-configured spiro[[2]benzopyran-1,1'-cyclohexan]-4'-amine connected to the tetrahydroisoquinoline system by an ethylene spacer (cis-31, Ki (σ2 )=200 nM; the highest σ1 affinity was recorded for the corresponding 2-benzofuran derivative with a CH2 C=O linker (cis-29, Ki (σ1 )=129 nM).
| S-EPMC8048568 | biostudies-literature
Project description:Stimuli-responsive metal-organic frameworks (MOFs) have gained increasing attention recently for their potential applications in many areas. We report the design and synthesis of a water-stable zirconium MOF (Zr-MOF) that bears photoresponsive azobenzene groups. This particular MOF can be used as a reservoir for storage of cargo in water, and the cargo-loaded MOF can be further capped to construct a mechanized MOF through the binding of ?-cyclodextrin with the azobenzene stalks on the MOF surface. The resulting mechanized MOF has shown on-command cargo release triggered by ultraviolet irradiation or addition of competitive agents without premature release. This study represents a simple approach to the construction of stimuli-responsive mechanized MOFs, and considering mechanized UiO-68-azo made from biocompatible components, this smart system may provide a unique MOF platform for on-command drug delivery in the future.
| S-EPMC4972467 | biostudies-literature