Browse
Submit Data
Databases
API
Help

Dataset Information

28 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Synthesis of AAB-Stacked Single-Crystal Graphene/hBN/Graphene Trilayer van der Waals Heterostructures by In Situ CVD.

ABSTRACT: van der Waals heterostructures based on graphene and hBN layers with different stacking modes are receiving considerable attention because of their potential application in fundamental physics. However, conventional exfoliation fabrication methods and layer-by-layer transfer techniques have various limitations. The CVD synthesis of high-quality large-area graphene and hBN multilayer heterostructures is essential for the advancement of new physics. Herein, the authors propose an in situ CVD growth strategy for synthesizing wafer-scale AAB-stacked single-crystal graphene/hBN/graphene trilayer van der Waals heterostructures. Single-crystal CuNi(111) alloys are prepared on sapphire, followed by the pre-dissolution of carbon atoms. Single-crystal monolayer hBN is synthesized on a plasma-cleaned CuNi(111) surface. Then, a single-crystal monolayer graphene is epitaxially grown onto the hBN surface to form graphene/hBN bilayer heterostructures. A controlled decrease in the growth temperature allows the carbon atoms to precipitate out of the CuNi(111) alloy to form single-crystal graphene at the interface between hBN and CuNi(111), thereby producing graphene/hBN/graphene trilayer van der Waals heterostructures. The stacking modes between as-grown 2D layers are investigated through Raman spectroscopy and transmission electron microscopy. This study provides an in situ CVD approach to directly synthesize large-scale single-crystal low-dimensional van der Waals heterostructures and facilitates their application in future 2D-material-based integrated circuits.

SUBMITTER: Tian B

PROVIDER: S-EPMC9313474 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Ultra-long carrier lifetime in neutral graphene-hBN van der Waals heterostructures under mid-infrared illumination.

Project description:Graphene/hBN heterostructures are promising active materials for devices in the THz domain, such as emitters and photodetectors based on interband transitions. Their performance requires long carrier lifetimes. However, carrier recombination processes in graphene possess sub-picosecond characteristic times for large non-equilibrium carrier densities at high energy. An additional channel has been recently demonstrated in graphene/hBN heterostructures by emission of hBN hyperbolic phonon polaritons (HPhP) with picosecond decay time. Here, we report on carrier lifetimes in graphene/hBN Zener-Klein transistors of ~30 ps for photoexcited carriers at low density and energy, using mid-infrared photoconductivity measurements. We further demonstrate the switching of carrier lifetime from ~30 ps (attributed to interband Auger) down to a few picoseconds upon ignition of HPhP relaxation at finite bias and/or with infrared excitation power. Our study opens interesting perspectives to exploit graphene/hBN heterostructures for THz lasing and highly sensitive THz photodetection as well as for phonon polariton optics.

| S-EPMC7018796 | biostudies-literature

Thermionic transport across gold-graphene-WSe2 van der Waals heterostructures.

Project description:Solid-state thermionic devices based on van der Waals structures were proposed for nanoscale thermal to electrical energy conversion and integrated electronic cooling applications. We study thermionic cooling across gold-graphene-WSe2-graphene-gold structures computationally and experimentally. Graphene and WSe2 layers were stacked, followed by deposition of gold contacts. The I-V curve of the structure suggests near-ohmic contact. A hybrid technique that combines thermoreflectance and cooling curve measurements is used to extract the device ZT. The measured Seebeck coefficient, thermal and electrical conductance, and ZT values at room temperatures are in agreement with the theoretical predictions using first-principles calculations combined with real-space Green's function formalism. This work lays the foundation for development of efficient thermionic devices.

| S-EPMC6839940 | biostudies-literature

Thermionic Energy Conversion Based on Graphene van der Waals Heterostructures.

Project description:Seeking for thermoelectric (TE) materials with high figure of merit (or ZT), which can directly converts low-grade wasted heat (400 to 500 K) into electricity, has been a big challenge. Inspired by the concept of multilayer thermionic devices, we propose and design a solid-state thermionic devices (as a power generator or a refrigerator) in using van der Waals (vdW) heterostructure sandwiched between two graphene electrodes, to achieve high energy conversion efficiency in the temperature range of 400 to 500 K. The vdW heterostructure is composed of suitable multiple layers of transition metal dichalcogenides (TMDs), such as MoS2, MoSe2, WS2 and WSe2. From our calculations, WSe2 and MoSe2 are identified as two ideal TMDs (using the reported experimental material's properties), which can harvest waste heat at 400 K with efficiencies about 7% to 8%. To our best knowledge, this design is the first in combining the advantages of graphene electrodes and TMDs to function as a thermionic-based device.

| S-EPMC5384245 | biostudies-literature

Scanning Probe Spectroscopy of WS2/Graphene Van Der Waals Heterostructures.

Project description:In this paper, we present a study of tungsten disulfide (WS2) two-dimensional (2D) crystals, grown on epitaxial Graphene. In particular, we have employed scanning electron microscopy (SEM) and µRaman spectroscopy combined with multifunctional scanning probe microscopy (SPM), operating in peak force-quantitative nano mechanical (PF-QNM), ultrasonic force microscopy (UFM) and electrostatic force microscopy (EFM) modes. This comparative approach provides a wealth of useful complementary information and allows one to cross-analyze on the nanoscale the morphological, mechanical, and electrostatic properties of the 2D heterostructures analyzed. Herein, we show that PF-QNM can accurately map surface properties, such as morphology and adhesion, and that UFM is exceptionally sensitive to a broader range of elastic properties, helping to uncover subsurface features located at the buried interfaces. All these data can be correlated with the local electrostatic properties obtained via EFM mapping of the surface potential, through the cantilever response at the first harmonic, and the dielectric permittivity, through the cantilever response at the second harmonic. In conclusion, we show that combining multi-parametric SPM with SEM and µRaman spectroscopy helps to identify single features of the WS2/Graphene/SiC heterostructures analyzed, demonstrating that this is a powerful tool-set for the investigation of 2D materials stacks, a building block for new advanced nano-devices.

| S-EPMC7762982 | biostudies-literature

Charge Transport Across Au-P3HT-Graphene van der Waals Vertical Heterostructures.

Project description:Hybrid van der Waals heterostructures based on 2D materials and/or organic thin films are being evaluated as potential functional devices for a variety of applications. In this context, the graphene/organic semiconductor (Gr/OSC) heterostructure could represent the core element to build future vertical organic transistors based on two back-to-back Gr/OSC diodes sharing a common graphene sheet, which functions as the base electrode. However, the assessment of the Gr/OSC potential still requires a deeper understanding of the charge carrier transport across the interface as well as the development of wafer-scale fabrication methods. This work investigates the charge injection and transport across Au/OSC/Gr vertical heterostructures, focusing on poly(3-hexylthiophen-2,5-diyl) as the OSC, where the PMMA-free graphene layer functions as the top electrode. The structures are fabricated using a combination of processes widely exploited in semiconductor manufacturing and therefore are suited for industrial upscaling. Temperature-dependent current-voltage measurements and impedance spectroscopy show that the charge transport across both device interfaces is injection-limited by thermionic emission at high bias, while it is space charge limited at low bias, and that the P3HT can be assumed fully depleted in the high bias regime. From the space charge limited model, the out-of-plane charge carrier mobility in P3HT is found to be equal to μ ≈ 2.8 × 10-4 cm2 V-1 s-1, similar to the in-plane mobility reported in previous works, while the charge carrier density is N0 ≈ 1.16 × 1015 cm-3, also in agreement with previously reported values. From the thermionic emission model, the energy barriers at the Gr/P3HT and Au/P3HT interfaces result in 0.30 eV and 0.25 eV, respectively. Based on the measured barriers heights, the energy band diagram of the vertical heterostructure is proposed under the hypothesis that P3HT is fully depleted.

| S-EPMC9614726 | biostudies-literature

Large area molybdenum disulphide- epitaxial graphene vertical Van der Waals heterostructures.

Project description:Two-dimensional layered transition metal dichalcogenides (TMDCs) show great potential for optoelectronic devices due to their electronic and optical properties. A metal-semiconductor interface, as epitaxial graphene - molybdenum disulfide (MoS2), is of great interest from the standpoint of fundamental science, as it constitutes an outstanding platform to investigate the interlayer interaction in van der Waals heterostructures. Here, we study large area MoS2-graphene-heterostructures formed by direct transfer of chemical-vapor deposited MoS2 layer onto epitaxial graphene/SiC. We show that via a direct transfer, which minimizes interface contamination, we can obtain high quality and homogeneous van der Waals heterostructures. Angle-resolved photoemission spectroscopy (ARPES) measurements combined with Density Functional Theory (DFT) calculations show that the transition from indirect to direct bandgap in monolayer MoS2 is maintained in these heterostructures due to the weak van der Waals interaction with epitaxial graphene. A downshift of the Raman 2D band of the graphene, an up shift of the A1g peak of MoS2 and a significant photoluminescence quenching are observed for both monolayer and bilayer MoS2 as a result of charge transfer from MoS2 to epitaxial graphene under illumination. Our work provides a possible route to modify the thin film TDMCs photoluminescence properties via substrate engineering for future device design.

| S-EPMC4894673 | biostudies-literature

Unraveling the 3D Atomic Structure of a Suspended Graphene/hBN van der Waals Heterostructure.

Project description:In this work we demonstrate that a free-standing van der Waals heterostructure, usually regarded as a flat object, can exhibit an intrinsic buckled atomic structure resulting from the interaction between two layers with a small lattice mismatch. We studied a freely suspended membrane of well-aligned graphene on a hexagonal boron nitride (hBN) monolayer by transmission electron microscopy (TEM) and scanning TEM (STEM). We developed a detection method in the STEM that is capable of recording the direction of the scattered electron beam and that is extremely sensitive to the local stacking of atoms. A comparison between experimental data and simulated models shows that the heterostructure effectively bends in the out-of-plane direction, producing an undulated structure having a periodicity that matches the moiré wavelength. We attribute this rippling to the interlayer interaction and also show how this affects the intralayer strain in each layer.

| S-EPMC5345117 | biostudies-literature

Multiferroicity in atomic van der Waals heterostructures.

Project description:Materials that are simultaneously ferromagnetic and ferroelectric - multiferroics - promise the control of disparate ferroic orders, leading to technological advances in microwave magnetoelectric applications and next generation of spintronics. Single-phase multiferroics are challenged by the opposite d-orbital occupations imposed by the two ferroics, and heterogeneous nanocomposite multiferroics demand ingredients' structural compatibility with the resultant multiferroicity exclusively at inter-materials boundaries. Here we propose the two-dimensional heterostructure multiferroics by stacking up atomic layers of ferromagnetic Cr2Ge2Te6 and ferroelectric In2Se3, thereby leading to all-atomic multiferroicity. Through first-principles density functional theory calculations, we find as In2Se3 reverses its polarization, the magnetism of Cr2Ge2Te6 is switched, and correspondingly In2Se3 becomes a switchable magnetic semiconductor due to proximity effect. This unprecedented multiferroic duality (i.e., switchable ferromagnet and switchable magnetic semiconductor) enables both layers for logic applications. Van der Waals heterostructure multiferroics open the door for exploring the low-dimensional magnetoelectric physics and spintronic applications based on artificial superlattices.

| S-EPMC6570651 | biostudies-literature

High broad-band photoresponsivity of mechanically formed InSe-graphene van der Waals heterostructures.

Project description:High broad-band photoresponsivity of mechanically formed InSe-graphene van der Waals heterostructures is achieved by exploiting the broad-band transparency of graphene, the direct bandgap of InSe, and the favorable band line up of InSe with graphene. The photoresponsivity exceeds that for other van der Waals heterostructures and the spectral response extends from the near-infrared to the visible spectrum.

| S-EPMC4768130 | biostudies-literature

Microscopic Mechanism of Van der Waals Heteroepitaxy in the Formation of MoS<sub>2</sub>/hBN Vertical Heterostructures.

Project description:Recent studies have revealed that van der Waals (vdW) heteroepitaxial growth of 2D materials on crystalline substrates, such as hexagonal boron nitride (hBN), leads to the formation of self-aligned grains, which results in defect-free stitching between the grains. However, how the weak vdW interaction causes a strong limitation on the crystal orientation of grains is still not understood yet. In this work, we have focused on investigating the microscopic mechanism of the self-alignment of MoS2 grains in vdW epitaxial growth on hBN. Using the density functional theory and the Lennard-Jones potential, we found that the interlayer energy between MoS2 and hBN strongly depends on the size and crystal orientation of MoS2. We also found that, when the size of MoS2 is several tens of nanometers, the rotational energy barrier can exceed ∼1 eV, which should suppress rotation to align the crystal orientation of MoS2 even at the growth temperature.

| S-EPMC7745401 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data