Browse
Submit Data
Databases
API
Help

Dataset Information

11 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Using Biomass Gasification Mineral Residue as Catalyst to Produce Light Olefins from CO, CO₂ , and H₂ Mixtures.

ABSTRACT: Gasification is a process to transform solids, such as agricultural and municipal waste, into gaseous feedstock for making transportation fuels. The so-called coarse solid residue (CSR) that remains after this conversion process is currently discarded as a process solid residue. In the context of transitioning from a linear to a circular society, the feasibility of using the solid process residue from waste gasification as a solid catalyst for light olefin production from CO, CO₂ , and H₂ mixtures was investigated. This CSR-derived catalyst converted biomass-derived syngas, a H₂ -poor mixture of CO, CO₂ , H₂ , and N₂ , into methane (57 %) and C₂ -C₄ olefins (43 %) at 450 °C and 20 bar. The main active ingredient of CSR was Fe, and it was discovered with operando X-ray diffraction that metallic Fe, present after pre-reduction in H₂ , transformed into an Fe carbide phase under reaction conditions. The increased formation of Fe carbides correlated with an increase in CO conversion and olefin selectivity. The presence of alkali elements, such as Na and K, in CSR-derived catalyst increased olefin production as well.

SUBMITTER: Ten Have IC

PROVIDER: S-EPMC9314133 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Empirical Kinetic Models for the CO2 Gasification of Biomass Chars. Part 1. Gasification of Wood Chars and Forest Residue Chars.

Project description:The gasification kinetics of charcoals and biomass chars is complicated by several factors, including chemical and physical inhomogeneities, the presence of mineral matter, and the irregular geometry of the pore structure. Even the theoretically deduced gasification models can only provide empirical or semiempirical descriptions. In this study, an empirical kinetic model from the earlier works of the authors was adapted for the CO2 gasification of biomass chars. It is based on a versatile polynomial approximation that helps to describe the dependence of the reaction rate on the progress of the conversion. The applicability of the model was tested by the reevaluation of 24 thermogravimetric analysis (TGA) experiments from earlier publications. The adjustable parameters of the model were determined by the method of least squares by evaluating groups of experiments together. Two evaluation strategies were tested. In the regular evaluations, the same kinetic parameters were employed for all the experiments with a given sample. The use of experiments with modulated and constant reaction rate (CRR) temperature programs made it possible to employ another approach too, when the preexponential factor was allowed to vary from experiment to experiment. The latter approach allows a formal kinetic description of the differences in the thermal deactivation of the samples caused by different thermal histories as well as of some inevitable systematic errors of the TGA experiments. The evaluations were carried out by both approaches, and the results were compared. The evaluations were based on 12 experiments. As a test, each evaluation of the study was repeated with only 8 experiments. The results of the latter test calculations indicated that the information content of the employed experiments is sufficient for the evaluation approaches of this work.

| S-EPMC8529891 | biostudies-literature

CO2 Gasification Reactivity of Char from High-Ash Biomass.

Project description:Biomass char produced from pyrolysis processes is of great interest to be utilized as renewable solid fuels or materials. Forest byproducts and agricultural wastes are low-cost and sustainable biomass feedstocks. These biomasses generally contain high amounts of ash-forming elements, generally leading to high char reactivity. This study elaborates in detail how chemical and physical properties affect CO2 gasification rates of high-ash biomass char, and it also targets the interactions between these properties. Char produced from pine bark, forest residue, and corncobs (particle size 4-30 mm) were included, and all contained different relative compositions of ash-forming elements. Acid leaching was applied to further investigate the influence of inorganic elements in these biomasses. The char properties relevant to the gasification rate were analyzed, that is, elemental composition, specific surface area, and carbon structure. Gasification rates were measured at an isothermal condition of 800 °C with 20% (vol.) of CO2 in N2. The results showed that the inorganic content, particularly K, had a stronger effect on gasification reactivity than specific surface area and aromatic cluster size of the char. At the gasification condition utilized in this study, K could volatilize and mobilize through the char surface, resulting in high gasification reactivity. Meanwhile, the mobilization of Ca did not occur at the low temperature applied, thus resulting in its low catalytic effect. This implies that the dispersion of these inorganic elements through char particles is an important reason behind their catalytic activity. Upon leaching by diluted acetic acid, the K content of these biomasses substantially decreased, while most of the Ca remained in the biomasses. With a low K content in leached biomass char, char reactivity was determined by the active carbon surface area.

| S-EPMC8679002 | biostudies-literature

Synergistic Effects of Catalyst Mixtures on Biomass Catalytic Pyrolysis.

Project description:This paper studied the synergistic effects of catalyst mixtures on biomass catalytic pyrolysis in comparison with the single catalyst in a microwave reactor and a TGA. In general, positive synergistic effects were identified based on increased mass loss rate, reduced activation energy, and improved bio-oil quality compared to the case with a single catalyst at higher catalyst loads. 10KP/10Bento (a mixture of 10% K3PO4 and 10% bentonite) increased the mass loss rate by 85 and 45% at heating rates of 100 and 25°C/min, respectively, compared to switchgrass without catalyst. The activation energy for 10KP/10Bento and 10KP/10Clino (a mixture of 10% K3PO4 and 10% clinoptilolite) was slightly lower or similar to other catalysts at 30 wt.% load. The reduction in the activation energy by the catalyst mixture was higher at 100°C/min than 25°C/min due to the improved catalytic activity at higher heating rates. Synergistic effects are also reflected in the improved properties of bio-oil, as acids, aldehydes, and anhydrosugars were significantly decreased, whereas phenol and aromatic compounds were substantially increased. 30KP (30% K3PO4) and 10KP/10Bento increased the content of alkylated phenols by 341 and 207%, respectively, in comparison with switchgrass without catalyst. Finally, the use of catalyst mixtures improved the catalytic performance markedly, which shows the potential to reduce the production cost of bio-oil and biochar from microwave catalytic pyrolysis.

| S-EPMC7767908 | biostudies-literature

Investigation of Petroleum Coke Gasification with CO2/H2O Mixtures and S/N Removal Mechanism via ReaxFF MD Simulation.

Project description:The removal of environmentally harmful S/N is crucial for utilization of high-S petroleum coke (petcoke) as fuels. Gasification of petcoke enables enhanced desulfurization and denitrification efficiency. Herein, petcoke gasification with the mixture of two effective gasifiers (CO2 and H2O) was simulated via reactive force field molecular dynamics (ReaxFF MD). The synergistic effect of the mixed agents on gas production was revealed by altering the CO2/H2O ratio. It was determined that the rise in H2O content could boost gas yield and accelerate desulfurization. Gas productivity reached 65.6% when the CO2/H2O ratio was 3:7. During the gasification, pyrolysis occurred first to facilitate the decomposition of petcoke particles and S/N removal. Desulfurization with the CO2/H2O gas mixture could be expressed as thiophene-S → S → COS → CHOS, thiophene-S → S → HS → H2S. The N-containing components experienced complicated mutual reactions before being transferred into CON, H2N, HCN, and NO. Simulating the gasification process on a molecular level is helpful in capturing the detailed S/N conversion path and reaction mechanism.

| S-EPMC10210290 | biostudies-literature

Mineral Carbonation of Biomass Ashes in Relation to Their CO2 Capture and Storage Potential.

Project description:Short-term stored, long-term stored, and weathered biomass ashes (BAs) produced from eight biomass varieties were studied to define their composition, mineral carbonation, and CO2 capture and storage (CCS) potential by a combination of methods. Most of these BAs are highly enriched in alkaline-earth and alkaline oxides, and the minerals responsible for CCS in them include carbonates such as calcite, kalicinite, and fairchildite, and to a lesser extent, butschliite and baylissite. These minerals are a result of reactions between alkaline-earth and alkaline oxyhydroxides in BA and flue CO2 gas during biomass combustion and atmospheric CO2 during BA storage and weathering. The mineral composition of the short-term stored, long-term stored, and weathered BAs is similar; however, there are increased proportions of carbonates and especially bicarbonates in the long-term stored BAs and particularly weathered BAs. The carbonation of BAs based on the measurement of CO2 volatilization determined in fixed temperature ranges is approximately 1-27% (mean 11%) for short-term stored BAs, 2-33% (mean 18%) for long-term stored BAs, and 2-34% (mean 22%) for weathered BAs. Hence, biomass has some extra CCS potential because of sequestration of atmospheric CO2 in BA, and the forthcoming industrial bioenergy production in a sustainable way can contribute for decreasing CO2 emissions and can reduce the use of costly CCS technologies.

| S-EPMC8190880 | biostudies-literature

Kinetic Model for the Direct Conversion of CO2/CO into Light Olefins over an In2O3-ZrO2/SAPO-34 Tandem Catalyst.

Project description:An original kinetic model is proposed for the direct production of light olefins by hydrogenation of CO2/CO (COx) mixtures over an In2O3-ZrO2/SAPO-34 tandem catalyst, quantifying deactivation by coke. The reaction network comprises 12 individual reactions, and deactivation is quantified with expressions dependent on the concentration of methanol (as coke precursor) and H2O and H2 (as agents attenuating coke formation). The experimental results were obtained in a fixed-bed reactor under the following conditions: In2O3-ZrO2/SAPO-34 mass ratio, 0/1-1/0; 350-425 °C; 20-50 bar; H2/COx ratio, 1-3; CO2/COx ratio, 0-1; space time, 0-10 gIn2O3-ZrO2 h molC-1, 0-20 gSAPO-34 h molC-1; time, up to 500 h; H2O and CH3OH in the feed, up to 5% vol. The utility of the model for further scale-up studies is demonstrated by its application in optimizing the process variables (temperature, pressure, and CO2/COx ratio). The model predicts an olefin yield higher than 7% (selectivity above 60%), a COx conversion of 12% and a CO2 conversion of 16% at 415 °C and 50 bar, for a CO2/COx = 0.5 in the feed. Additionally, an analysis of the effect of In2O3-ZrO2 and SAPO-34 loading in the configuration of the tandem catalyst is conducted, yielding 17% olefins and complete conversion of CO2 under full water removal conditions.

| S-EPMC10828986 | biostudies-literature

Ambient-pressure hydrogenation of CO2 into long-chain olefins.

Project description:The conversion of CO2 by renewable power-generated hydrogen is a promising approach to a sustainable production of long-chain olefins (C4+=) which are currently produced from petroleum resources. The decentralized small-scale electrolysis for hydrogen generation requires the operation of CO2 hydrogenation in ambient-pressure units to match the manufacturing scales and flexible on-demand production. Herein, we report a Cu-Fe catalyst which is operated under ambient pressure with comparable C4+= selectivity (66.9%) to that of the state-of-the-art catalysts (66.8%) optimized under high pressure (35 bar). The catalyst is composed of copper, iron oxides, and iron carbides. Iron oxides enable reverse-water-gas-shift to produce CO. The synergy of carbide path over iron carbides and CO insertion path over interfacial sites between copper and iron carbides leads to efficient C-C coupling into C4+=. This work contributes to the development of small-scale low-pressure devices for CO2 hydrogenation compatible with sustainable hydrogen production.

| S-EPMC9064975 | biostudies-literature

MAPO-18 Catalysts for the Methanol to Olefins Process: Influence of Catalyst Acidity in a High-Pressure Syngas (CO and H2) Environment.

Project description:The transition from integrated petrochemical complexes toward decentralized chemical plants utilizing distributed feedstocks calls for simpler downstream unit operations. Less separation steps are attractive for future scenarios and provide an opportunity to design the next-generation catalysts, which function efficiently with effluent reactant mixtures. The methanol to olefins (MTO) reaction constitutes the second step in the conversion of CO2, CO, and H2 to light olefins. We present a series of isomorphically substituted zeotype catalysts with the AEI topology (MAPO-18s, M = Si, Mg, Co, or Zn) and demonstrate the superior performance of the M(II)-substituted MAPO-18s in the conversion of MTO when tested at 350 °C and 20 bar with reactive feed mixtures consisting of CH3OH/CO/CO2/H2. Co-feeding high pressure H2 with methanol improved the catalyst activity over time, but simultaneously led to the hydrogenation of olefins (olefin/paraffin ratio < 0.5). Co-feeding H2/CO/CO2/N2 mixtures with methanol revealed an important, hitherto undisclosed effect of CO in hindering the hydrogenation of olefins over the Brønsted acid sites (BAS). This effect was confirmed by dedicated ethene hydrogenation studies in the absence and presence of CO co-feed. Assisted by spectroscopic investigations, we ascribe the favorable performance of M(II)APO-18 under co-feed conditions to the importance of the M(II) heteroatom in altering the polarity of the M-O bond, leading to stronger BAS. Comparing SAPO-18 and MgAPO-18 with BAS concentrations ranging between 0.2 and 0.4 mmol/gcat, the strength of the acidic site and not the density was found to be the main activity descriptor. MgAPO-18 yielded the highest activity and stability upon syngas co-feeding with methanol, demonstrating its potential to be a next-generation MTO catalyst.

| S-EPMC8788383 | biostudies-literature

Conditions for the Joint Conversion of CO2 and Syngas in the Direct Synthesis of Light Olefins Using In2O3-ZrO2/SAPO-34 Catalyst.

Project description:The conditions for promoting the joint conversion of CO2 and syngas in the direct synthesis of light olefins have been studied. In addition, given the relevance for the viability of the process, the stability of the In2O3-ZrO2/SAPO-34 (InZr/S34) catalyst has also been pursued. The CO+CO2 (CO x ) hydrogenation experimental runs were conducted in a packed bed isothermal reactor under the following conditions: 375-425 °C; 20-40 bar; space time, 1.25-20 gcatalyst h molC -1; H2/(CO x ) ratio in the feed, 1-3; CO2/(CO x ) ratio in the feed, 0.5; time on stream (TOS), up to 24 h. Analyzing the reaction indices (CO2 and CO x conversions, yield and selectivity of olefins and paraffins, and stability), the following have been established as suitable conditions: 400 °C, 30 bar, 5-10 gcat h molC -1, CO2/CO x = 0.5, and H2/CO x = 3. Under these conditions, the catalyst is stable (after an initial period of deactivation by coke), and olefin yield and selectivity surpass 4 and 70%, respectively, with light paraffins as byproducts. Produced olefin yields follow propylene > ethylene > butenes. The conditions of the process (low pressure and low H2/CO x ratio) may facilitate the integration of sustainable H2 production with PEM electrolyzers and the covalorization of CO2 and syngas obtained from biomass.

| S-EPMC9335533 | biostudies-literature

Single PEDOT Catalyst Boosts CO2 Photoreduction Efficiency.

Project description:Atmospheric pollution demands the development of solar-driven photocatalytic technologies for the conversion of CO2 into a fuel; state-of-the-art cocatalyst systems demonstrate conversion efficiencies currently unattainable by a single catalyst. Here, we upend the status quo demonstrating that the nanofibrillar conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) is a record-breaking single catalyst for the photoreduction of CO2 to CO. This high catalytic efficiency stems from a highly conductive nanofibrillar structure that significantly enhances surface area, CO2 adsorption and light absorption. Moreover, the polymer's band gap is optimized via chemical doping/dedoping treatments using hydrochloric acid, ammonia hydroxide, and hydrazine. The hydrazine-treated PEDOT catalyst exhibits 100% CO yield under a stable regime (>10 h) with a maximum rate of CO evolution (3000 μmol gcat -1 h-1) that is 2 orders of magnitude higher than the top performing single catalyst and surpassed only by three other cocatalyst systems. Nanofibrillar PEDOT provides a new direction for designing the next generation of high-efficiency photoreduction catalysts.

| S-EPMC8554841 | biostudies-literature