Browse
Submit Data
Databases
API
Help

Dataset Information

15 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Facile and Rapid Synthesis of Porous Hydrated V₂O₅ Nanoflakes for High-Performance Zinc Ion Battery Applications.

ABSTRACT: Hydrated V₂O₅ with unique physical and chemical characteristics has been widely used in various function devices, including solar cells, catalysts, electrochromic windows, supercapacitors, and batteries. Recently, it has attracted extensive attention because of the enormous potential for the high-performance aqueous zinc ion battery cathode. Although great progress has been made in developing applications of hydrated V₂O₅, little research focuses on improving current synthesis methods, which have disadvantages of massive energy consumption, tedious reaction time, and/or low efficiency. Herein, an improved synthesis method is developed for hydrated V₂O₅ nanoflakes according to the phenomenon that the reactions between V₂O₅ and peroxide can be dramatically accelerated with low-temperature heating. Porous hydrated V₂O₅ nanoflake gel was obtained from cheap raw materials at 40 °C in 30 min. It shows a high specific capacity, of 346.6 mAh/g, at 0.1 A/g; retains 55.2% of that at 20 A/g; and retains a specific capacity of 221.0 mAh/g after 1800 charging/discharging cycles at 1 A/g as an aqueous zinc ion battery cathode material. This work provides a highly facile and rapid synthesis method for hydrated V₂O₅, which may favor its applications in energy storage and other functional devices.

SUBMITTER: Guo K

PROVIDER: S-EPMC9318212 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

A chemically self-charging aqueous zinc-ion battery.

Project description:Self-charging power systems integrating energy harvesting technologies and batteries are attracting extensive attention in energy technologies. However, the conventional integrated systems are highly dependent on the availability of the energy sources and generally possess complicated configuration. Herein, we develop chemically self-charging aqueous zinc-ion batteries with a simplified two-electrode configuration based on CaV6O16·3H2O electrode. Such system possesses the capability of energy harvesting, conversion and storage simultaneously. It can be chemically self-recharged by the spontaneous redox reaction between the discharged cathode and oxygen from the ambient environment. Chemically self-recharged zinc-ion batteries display an initial open-circuit voltage of about 1.05?V and a considerable discharge capacity of about 239?mAh?g-1, indicating the excellent self-rechargeability. Impressively, such chemically self-charging zinc-ion batteries can also work well at chemical or/and galvanostatic charging hybrid modes. This work not only provides a route to design chemically self-charging energy storage, but also broadens the horizons of aqueous zinc-ion batteries.

| S-EPMC7198488 | biostudies-literature

Zinc ion interactions in a two-dimensional covalent organic framework based aqueous zinc ion battery.

Project description:The two-dimensional structural features of covalent organic frameworks (COFs) can promote the electrochemical storage of cations like H+, Li+, and Na+ through both faradaic and non-faradaic processes. However, the electrochemical storage of cations like Zn2+ ion is still unexplored although it bears a promising divalent charge. Herein, for the first time, we have utilized hydroquinone linked β-ketoenamine COF acting as a Zn2+ anchor in an aqueous rechargeable zinc ion battery. The charge-storage mechanism comprises of an efficient reversible interlayer interaction of Zn2+ ions with the functional moieties in the adjacent layers of COF (-182.0 kcal mol-1). Notably, due to the well-defined nanopores and structural organization, a constructed full cell, displays a discharge capacity as high as 276 mA h g-1 at a current rate of 125 mA g-1.

| S-EPMC6855258 | biostudies-literature

Morphology-Dependent Electrochemical Performance of Zinc Hexacyanoferrate Cathode for Zinc-Ion Battery.

Project description:Zinc hexacyanoferrate (ZnHCF) which is a dimorphic (cubic or rhombohedral) Prussian blue analogue and can be intercalated by both monovalent and divalent ions,is a promising cathode material for rechargeable aqueous metal-ion batteries.In this paper, a simple co-precipitation method is developed to tune the particle morphology of ZnHCF by adjusting the dropping speed at room temperature. Three polyhedral ZnHCF particles, with cubooctahedral, truncated octahedral or octahedral shapes, are obtained at room temperature. Structural transformation from cubic phase of as-prepared ZnHCF to rhombohedral phase is observed by further dehydration of the sample at 70 °C, whereas the dehydrated ZnHCF crystals still hold the identical polyhedral shape as that of the cubic phase particles. Then the influence of shape and facets on electrochemical performance is studied for polyhedral ZnHCF with rhombohedral structure (RZnHCF). RZnHCF sample with cubooctahedral shape possesses the best rate capability and cyclic stability comparing with RZnHCF particles having truncated octahedral or octahedral shapes. Furthermore, the structure of cuboctahedron RZnHCF particles during electrochemical cycling has been monitored with ex situ X-ray diffraction to demonstrate the reversible zinc-ion intercalation mechanism.

| S-EPMC4680913 | biostudies-literature

Enhanced Reversible Zinc Ion Intercalation in Deficient Ammonium Vanadate for High-Performance Aqueous Zinc-Ion Battery.

Project description:Ammonium vanadate with bronze structure (NH4V4O10) is a promising cathode material for zinc-ion batteries due to its high specific capacity and low cost. However, the extraction of [Formula: see text] at a high voltage during charge/discharge processes leads to irreversible reaction and structure degradation. In this work, partial [Formula: see text] ions were pre-removed from NH4V4O10 through heat treatment; NH4V4O10 nanosheets were directly grown on carbon cloth through hydrothermal method. Deficient NH4V4O10 (denoted as NVO), with enlarged interlayer spacing, facilitated fast zinc ions transport and high storage capacity and ensured the highly reversible electrochemical reaction and the good stability of layered structure. The NVO nanosheets delivered a high specific capacity of 457 mAh g-1 at a current density of 100 mA g-1 and a capacity retention of 81% over 1000 cycles at 2 A g-1. The initial Coulombic efficiency of NVO could reach up to 97% compared to 85% of NH4V4O10 and maintain almost 100% during cycling, indicating the high reaction reversibility in NVO electrode.

| S-EPMC8087727 | biostudies-literature

Pristine and Modified Porous Membranes for Zinc Slurry-Air Flow Battery.

Project description:The membrane is a crucial component of Zn slurry-air flow battery since it provides ionic conductivity between the electrodes while avoiding the mixing of the two compartments. Herein, six commercial membranes (Cellophane™ 350PØØ, Zirfon®, Fumatech® PBI, Celgard® 3501, 3401 and 5550) were first characterized in terms of electrolyte uptake, ion conductivity and zincate ion crossover, and tested in Zn slurry-air flow battery. The peak power density of the battery employing the membranes was found to depend on the in-situ cell resistance. Among them, the cell using Celgard® 3501 membrane, with in-situ area resistance of 2 Ω cm2 at room temperature displayed the highest peak power density (90 mW cm-2). However, due to the porous nature of most of these membranes, a significant crossover of zincate ions was observed. To address this issue, an ion-selective ionomer containing modified poly(phenylene oxide) (PPO) and N-spirocyclic quaternary ammonium monomer was coated on a Celgard® 3501 membrane and crosslinked via UV irradiation (PPO-3.45 + 3501). Moreover, commercial FAA-3 solutions (FAA, Fumatech) were coated for comparison purpose. The successful impregnation of the membrane with the anion-exchange polymers was confirmed by SEM, FTIR and Hg porosimetry. The PPO-3.45 + 3501 membrane exhibited 18 times lower zincate ions crossover compared to that of the pristine membrane (5.2 × 10-13 vs. 9.2 × 10-12 m2 s-1). With low zincate ions crossover and a peak power density of 66 mW cm-2, the prepared membrane is a suitable candidate for rechargeable Zn slurry-air flow batteries.

| S-EPMC8272061 | biostudies-literature

Temperature-Dependent Vapor Infiltration of Sulfur into Highly Porous Hierarchical Three-Dimensional Conductive Carbon Networks for Lithium Ion Battery Applications.

Project description:Hierarchical, conductive, porous, three-dimensional (3D) carbon networks based on carbon nanotubes are used as a scaffold material for the incorporation of sulfur in the vapor phase to produce carbon nanotube tube/sulfur (CNTT/S) composites for application in lithium ion batteries (LIBs) as a cathode material. The high conductivity of the carbon nanotube-based scaffold material, in combination with vapor infiltration of sulfur, allows for improved utilization of insulating sulfur as the active material in the cathode. When sulfur is evenly distributed throughout the network via vapor infiltration, the carbon scaffold material confines the sulfur, allowing the sulfur to become electrochemically active in the context of an LIB. The electrochemical performance of the sulfur cathode was further investigated as a function of the temperature used for the vapor infiltration of sulfur into the carbon scaffolds (155, 175, and 200 °C) in order to determine the ideal infiltration temperature to maximize sulfur loading and minimize the polysulfide shuttle effect. In addition, the nature of the incorporation of sulfur at the interfaces within the 3D carbon network at the different vapor infiltration temperatures will be investigated via Raman, scanning electron microscopy/energy dispersive X-ray, and X-ray photoelectron spectroscopy. The resulting CNTT/S composites, infiltrated at each temperature, were incorporated into a half-cell using Li metal as a counter electrode and a 0.7 M LiTFSI electrolyte in ether solvents and characterized electrochemically using cyclic voltammetry measurements. The results indicate that the CNTT matrix infiltrated with sulfur at the highest temperature (200 °C) had improved incorporation of sulfur into the carbon network, the best electrochemical performance, and the highest sulfur loading, 8.4 mg/cm2, compared to the CNTT matrices infiltrated at 155 and 175 °C, with sulfur loadings of 4.8 and 6.3 mg/cm2, respectively.

| S-EPMC7643246 | biostudies-literature

Applications of Carbon Nanotubes for Lithium Ion Battery Anodes.

Project description:Carbon nanotubes (CNTs) have displayed great potential as anode materials for lithium ion batteries (LIBs) due to their unique structural, mechanical, and electrical properties. The measured reversible lithium ion capacities of CNT-based anodes are considerably improved compared to the conventional graphite-based anodes. Additionally, the opened structure and enriched chirality of CNTs can help to improve the capacity and electrical transport in CNT-based LIBs. Therefore, the modification of CNTs and design of CNT structure provide strategies for improving the performance of CNT-based anodes. CNTs could also be assembled into free-standing electrodes without any binder or current collector, which will lead to increased specific energy density for the overall battery design. In this review, we discuss the mechanism of lithium ion intercalation and diffusion in CNTs, and the influence of different structures and morphologies on their performance as anode materials for LIBs.

| S-EPMC5512968 | biostudies-other

A High-Capacity Ammonium Vanadate Cathode for Zinc-Ion Battery.

Project description:Given the advantages of being abundant in resources, environmental benign and highly safe, rechargeable zinc-ion batteries (ZIBs) enter the global spotlight for their potential utilization in large-scale energy storage. Despite their preliminary success, zinc-ion storage that is able to deliver capacity > 400 mAh g-1 remains a great challenge. Here, we demonstrate the viability of NH4V4O10 (NVO) as high-capacity cathode that breaks through the bottleneck of ZIBs in limited capacity. The first-principles calculations reveal that layered NVO is a good host to provide fast Zn2+ ions diffusion channel along its [010] direction in the interlayer space. On the other hand, to further enhance Zn2+ ion intercalation kinetics and long-term cycling stability, a three-dimensional (3D) flower-like architecture that is self-assembled by NVO nanobelts (3D-NVO) is rationally designed and fabricated through a microwave-assisted hydrothermal method. As a result, such 3D-NVO cathode possesses high capacity (485 mAh g-1) and superior long-term cycling performance (3000 times) at 10 A g-1 (~ 50 s to full discharge/charge). Additionally, based on the excellent 3D-NVO cathode, a quasi-solid-state ZIB with capacity of 378 mAh g-1 is developed.

| S-EPMC7770878 | biostudies-literature

Facile Solution Synthesis of Red Phosphorus Nanoparticles for Lithium Ion Battery Anodes.

Project description:Red phosphorus (RP) has attracted extensive attention as an anodic material for lithium-ion batteries (LIBs) due to its high theoretical specific capacity of 2596 mA h g- 1 and earth abundance. However, the facile and large-scale preparation of the red phosphorus nanomaterials via a solution synthesis remains a challenge. Herein, we develop a simple and facile solution method to prepare red phosphorus nanoparticles (RP NPs). PCl3 readily reacts with HSiCl3 in the presence of amines at room temperature to produce amorphous RP NPs with sizes about 100-200 nm in high yields. When used as an anode for rechargeable lithium ion battery, the RP NP electrode exhibits good electrochemical performance with a reversible capacity of 1380 mA h g- 1 after 100 cycles at a current density of 100 mA g- 1, and Coulombic efficiencies reaching almost 100% for each cycle. The study shows that this solution synthesis is a facile and convenient approach for large-scale production of RP NP materials for use in high-performance Li-ion batteries.

| S-EPMC6223392 | biostudies-literature

Surface-Alloyed Nanoporous Zinc as Reversible and Stable Anodes for High-Performance Aqueous Zinc-Ion Battery.

Project description:Metallic zinc (Zn) is one of the most attractive multivalent-metal anode materials in post-lithium batteries because of its high abundance, low cost and high theoretical capacity. However, it usually suffers from large voltage polarization, low Coulombic efficiency and high propensity for dendritic failure during Zn stripping/plating, hindering the practical application in aqueous rechargeable zinc-metal batteries (AR-ZMBs). Here we demonstrate that anionic surfactant-assisted in situ surface alloying of Cu and Zn remarkably improves Zn reversibility of 3D nanoporous Zn electrodes for potential use as high-performance AR-ZMB anode materials. As a result of the zincophilic ZnxCuy alloy shell guiding uniform Zn deposition with a zero nucleation overpotential and facilitating Zn stripping via the ZnxCuy/Zn galvanic couples, the self-supported nanoporous ZnxCuy/Zn electrodes exhibit superior dendrite-free Zn stripping/plating behaviors in ambient aqueous electrolyte, with ultralow polarizations under current densities up to 50 mA cm‒2, exceptional stability for 1900 h and high Zn utilization. This enables AR-ZMB full cells constructed with nanoporous ZnxCuy/Zn anode and KzMnO2 cathode to achieve specific energy of as high as ~ 430 Wh kg‒1 with ~ 99.8% Coulombic efficiency, and retain ~ 86% after long-term cycles for > 700 h.

| S-EPMC9198195 | biostudies-literature