Browse
Submit Data
Databases
API
Help

Dataset Information

26 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A Synergistic Effect of Phthalimide-Substituted Sulfanyl Porphyrazines and Carbon Nanotubes to Improve the Electrocatalytic Detection of Hydrogen Peroxide

ABSTRACT: A sulfanyl porphyrazine derivative with peripheral phthalimide moieties was metallated with cobalt(II) and iron(II) metal ions. The purity of the macrocycles was confirmed by HPLC, and subsequently, compounds were characterized using various analytical methods (ES-TOF, MALDI-TOF, UV–VIS, and NMR spectroscopy). To obtain hybrid electroactive electrode materials, novel porphyrazines were combined with multiwalled carbon nanotubes. The electrocatalytic effect derived from cobalt(II) and iron(II) cations was evaluated. As a result, a significant decrease in the overpotential was observed compared with that obtained with bare glassy carbon (GC) or glassy carbon electrode/carbon nanotubes (GC/MWCNTs), which allowed for sensitive determination of hydrogen peroxide in neutral conditions (pH 7.4). The prepared sensor enables a linear response to H2O2 concentrations of 1–90 µM. A low detection limit of 0.18 μM and a high sensitivity of 640 μA mM−1 cm−2 were obtained. These results indicate that the obtained sensors could potentially be applied in biomedical and environmental fields.

SUBMITTER: Falkowski M

PROVIDER: S-EPMC9322414 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Improved Electrochemical Hydrogen Peroxide Detection Using a Nickel(II) Phthalimide-Substituted Porphyrazine Combined with Various Carbon Nanomaterials.

Project description:A metal-free porphyrazine derivative with peripheral phthalimide substituents was metallated with a nickel(II) ion. The purity of the nickel macrocycle was confirmed using HPLC, and characterized by MS, UV-VIS, and 1D (1H, 13C) and 2D (1H-13C HSQC, 1H-13C HMBC, 1H-1H COSY) NMR techniques. The novel porphyrazine was combined with various carbon nanomaterials, such as carbon nanotubes-single walled (SWCNTs) and multi-walled (MWCNTs), and electrochemically reduced graphene oxide (rGO), to create hybrid electroactive electrode materials. The carbon nanomaterials' effect on the electrocatalytic properties of nickel(II) cations was compared. As a result, an extensive electrochemical characterization of the synthesized metallated porphyrazine derivative on various carbon nanostructures was carried out using cyclic voltammetry (CV), chronoamperometry (CA), and electrochemical impedance spectroscopy (EIS). An electrode modified with carbon nanomaterials GC/MWCNTs, GC/SWCNTs, or GC/rGO, respectively, was shown to have a lower overpotential than a bare glassy carbon electrode (GC), allowing for the measurement of hydrogen peroxide in neutral conditions (pH 7.4). It was shown that among the tested carbon nanomaterials, the modified electrode GC/MWCNTs/Pz3 exhibited the best electrocatalytic properties in the direction of hydrogen peroxide oxidation/reduction. The prepared sensor was determined to enable a linear response to H2O2 in concentrations ranging between 20-1200 µM with the detection limit of 18.57 µM and sensitivity of 14.18 µA mM-1 cm-2. As a result of this research, the sensors produced here may find use in biomedical and environmental applications.

| S-EPMC10005363 | biostudies-literature

Synergistic antibacterial activity of silver nanoparticles and hydrogen peroxide.

Project description:The increasing challenge of antibiotic resistance requires not only the discovery of new antibiotics, but also the development of new alternative approaches. Herein, the synergistic antibacterial activity of silver nanoparticles and hydrogen peroxide combination is reported. Unlike the bacteriostatic or slightly bactericidal activity achieved by using each agent alone, using these two agents in combination, even at relatively low concentrations, resulted in complete eradication of both the Gram negative Escherichia coli and the Gram positive Staphylococcus aureus in short treatment times indicating a clear synergistic effect between them. Modifying the surface chemistry of silver nanoparticles and the accompanied change in their surface charge enabled a further enhancement of such synergistic effect implying the importance of this aspect. Mechanistically, a Fenton-like reaction between silver nanoparticles and hydrogen peroxide is discussed and hypothesized to be the basis of the observed synergy. Achieving such a significant antibacterial activity at low concentrations reduces the potential toxicity of these agents and hence enables their utilization as an alternative antibacterial approach in wider range of applications.

| S-EPMC6687290 | biostudies-literature

Photocatalytic and Electrocatalytic Generation of Hydrogen Peroxide: Principles, Catalyst Design and Performance.

Project description:Hydrogen peroxide (H2O2) is a high-demand organic chemical reagent and has been widely used in various modern industrial applications. Currently, the prominent method for the preparation of H2O2 is the anthraquinone oxidation. Unfortunately, it is not conducive to economic and sustainable development since it is a complex process and involves unfriendly environment and potential hazards. In this context, numerous approaches have been developed to synthesize H2O2. Among them, photo/electro-catalytic ones are considered as two of the most promising manners for on-site synthesis of H2O2. These alternatives are sustainable in that only water or O2 is required. Namely, water oxidation (WOR) or oxygen reduction (ORR) reactions can be further coupled with clean and sustainable energy. For photo/electro-catalytic reactions for H2O2 generation, the design of the catalysts is extremely important and has been extensively conducted with an aim to obtain ultimate catalytic performance. This article overviews the basic principles of WOR and ORR, followed by the summary of recent progresses and achievements on the design and performance of various photo/electro-catalysts for H2O2 generation. The related mechanisms for these approaches are highlighted from theoretical and experimental aspects. Scientific challenges and opportunities of engineering photo/electro-catalysts for H2O2 generation are also outlined and discussed.

| S-EPMC10050521 | biostudies-literature

Tetranuclear Manganese Models of the OEC Displaying Hydrogen Bonding Interactions: Application to Electrocatalytic Water Oxidation to Hydrogen Peroxide.

Project description:Toward the development of structural and functional models of the oxygen evolving complex (OEC) of photosystem II, we report the synthesis of site-differentiated tetranuclear manganese complexes featuring three six-coordinate and one five-coordinate Mn centers. To incorporate biologically relevant second coordination sphere interactions, substituents capable of hydrogen bonding are included as pyrazolates with arylamine substituents. Complexes with terminal anionic ligands, OH- or Cl-, bound to the lower coordinate metal center are supported through the hydrogen-bonding network in a fashion reminiscent of the enzymatic active site. The hydroxide complex was found to be a competent electrocatalyst for O-O bond formation, a key transformation pertinent to the OEC. In an acetonitrile-water mixture, at neutral pH, electrochemical water oxidation to hydrogen peroxide was observed, albeit with low (15%) Faradaic yield, likely due to competing reactions with organics. In agreement, 9,10-dihydroanthracene is electrochemically oxidized in the presence of this cluster both via H-atom abstraction and oxygenation with ∼50% combined Faradaic yield.

| S-EPMC5643074 | biostudies-literature

Metal single-site catalyst design for electrocatalytic production of hydrogen peroxide at industrial-relevant currents.

Project description:Direct hydrogen peroxide (H2O2) electrosynthesis via the two-electron oxygen reduction reaction is a sustainable alternative to the traditional energy-intensive anthraquinone technology. However, high-performance and scalable electrocatalysts with industrial-relevant production rates remain to be challenging, partially due to insufficient atomic level understanding in catalyst design. Here we utilize theoretical approaches to identify transition-metal single-site catalysts for two-electron oxygen reduction using the *OOH binding energy as a descriptor. The theoretical predictions are then used as guidance to synthesize the desired cobalt single-site catalyst with a O-modified Co-(pyrrolic N)4 configuration that can achieve industrial-relevant current densities up to 300 mA cm-2 with 96-100% Faradaic efficiencies for H2O2 production at a record rate of 11,527 mmol h-1 gcat-1. Here, we show the feasibility and versatility of metal single-site catalyst design using various commercial carbon and cobalt phthalocyanine as starting materials and the high applicability for H2O2 electrosynthesis in acidic, neutral and alkaline electrolytes.

| S-EPMC9837053 | biostudies-literature

Ferrocene-Grafted Carbon Nanotubes for Sensitive Non-Enzymatic Electrochemical Detection of Hydrogen Peroxide.

Project description:Sensitive detection of hydrogen peroxide (H2O2) residue in aseptic packaging at point of use is critical to food safety. We present a sensitive non-enzymatic, amperometric H2O2 sensor based on ferrocene-functionalized multi-walled carbon nanotubes (MWCNT-FeC) and facile screen-printed carbon electrodes (SPCEs). The sensor utilizes the covalently grafted ferrocene as an effective redox mediator and the MWCNT networks to provide a large active surface area for efficient electrocatalytic reactions. The electrocatalytic MWCNT-FeC modified electrodes feature a high-efficiency electron transfer and a high electrocatalytic activity towards H2O2 reduction at a low potential of -0.15 V vs. Ag/AgCl. The decreased operating potential improves the selectivity by inherently eliminating the cross-reactivity with other electroactive interferents, such as dopamine, glucose, and ascorbic acid. The sensor exhibits a wide linear detection range from 1 μM to 1 mM with a detection limit of 0.49 μM (S/N=3). The covalently functionalized electrodes offered highly reproducible and reliable detection, providing a robust property for continuous, real-time H2O2 monitoring. Furthermore, the proposed sensor was successfully employed to determine H2O2 levels in spiked packaged milk and apple juice with satisfactory recoveries (94.33-97.62%). The MWCNT-FeC modified SPCEs offered a facile, cost-effective method for highly sensitive and selective point-of-use detection of H2O2.

| S-EPMC8896809 | biostudies-literature

Co-axial heterostructures integrating palladium/titanium dioxide with carbon nanotubes for efficient electrocatalytic hydrogen evolution.

Project description:Considering the depletion of fossil-fuel reserves and their negative environmental impact, new energy schemes must point towards alternative ecological processes. Efficient hydrogen evolution from water is one promising route towards a renewable energy economy and sustainable development. Here we show a tridimensional electrocatalytic interface, featuring a hierarchical, co-axial arrangement of a palladium/titanium dioxide layer on functionalized multi-walled carbon nanotubes. The resulting morphology leads to a merging of the conductive nanocarbon core with the active inorganic phase. A mechanistic synergy is envisioned by a cascade of catalytic events promoting water dissociation, hydride formation and hydrogen evolution. The nanohybrid exhibits a performance exceeding that of state-of-the-art electrocatalysts (turnover frequency of 15000 H2 per hour at 50 mV overpotential). The Tafel slope of ∼130 mV per decade points to a rate-determining step comprised of water dissociation and formation of hydride. Comparative activities of the isolated components or their physical mixtures demonstrate that the good performance evolves from the synergistic hierarchical structure.

| S-EPMC5159813 | biostudies-literature

Biomimetic versus enzymatic high-potential electrocatalytic reduction of hydrogen peroxide on a functionalized carbon nanotube electrode.

Project description:We report the non-covalent functionalization of a multi-walled carbon nanotube (MWCNT) electrode with a biomimetic model of the horseradish peroxidase (HRP) active site. By modifying the MWCNT electrode surface with imidazole-modified polypyrrole, a new biomimetic complex of HRP was synthesized on the MWCNT sidewalls via the coordination of imidazole (Im) to the metal centre of iron protoporphyrin IX, affording (Im)(PP)FeIII . Compared to the pi-stacking of non-coordinated (PP)FeIII on a MWCNT electrode, the (Im)(PP)FeIII -modified MWCNT electrode exhibits higher electrocatalytic activity with an Imax = 0.52 mA cm-2 for the reduction of H2O2, accompanied by a high onset potential of 0.43 V vs. Ag/AgCl. The performances of these novel surface-confined HRP mimics were compared to those of a MWCNT electrode modified by HRP. Although the enzyme electrode displays a higher electrocatalytic activity towards H2O2 reduction, the (Im)(PP)FeIII -modified MWCNT electrode exhibits a markedly higher operational stability, retaining 63% of its initial activity after one month.

| S-EPMC5666682 | biostudies-literature

Chronoamperometric Observation and Analysis of Electrocatalytic Ability of Single Pd Nanoparticle for Hydrogen Peroxide Reduction Reaction.

Project description:The current generated by the collision of a single nanoparticle (NP) of palladium (Pd) on a gold (Au) ultramicroelectrode (UME) surface was observed using an electrocatalytic amplification method. The hydrogen peroxide reduction reaction was used for the electrocatalytic reaction because the hydrogen peroxide reduction reaction has no gas-phase product, which would induce rapid signal decay. The electrocatalytic current resulting from a single Pd nanoparticle on the Au UME shows a staircase response with accompanying slow current decay. The applying potential and concentration of hydrogen peroxide were optimized for clear distinction of signal. The height of the current step and signal frequency were analyzed and compared with the theoretical expectation. The analysis of the electrocatalytic activity of single Pd NPs provides insight toward their future application.

| S-EPMC6266670 | biostudies-literature

Photoelectrocatalytic Synthesis of Hydrogen Peroxide by Molecular Copper-Porphyrin Supported on Titanium Dioxide Nanotubes.

Project description:We report on a self-assembled system comprising a molecular copper-porphyrin photoelectrocatalyst, 5-(4-carboxy-phenyl)-10,15,20-triphenylporphyrinatocopper(II) (CuTPP-COOH), covalently bound to self-organized, anodic titania nanotube arrays (TiO2 NTs) for photoelectrochemical reduction of oxygen. Visible light irradiation of the porphyrin-covered TiO2 NTs under cathodic polarization up to -0.3?V vs. Normal hydrogen electrode (NHE) photocatalytically produces H2O2 in pH neutral electrolyte, at room temperature and without need of sacrificial electron donors. The formation of H2O2 upon irradiation is proven and quantified by direct colorimetric detection using 4-nitrophenyl boronic acid (p-NPBA) as a reactant. This simple approach for the attachment of a small molecular catalyst to TiO2 NTs may ultimately allow for the preparation of a low-cost H2O2 evolving cathode for efficient photoelectrochemical energy storage under ambient conditions.

| S-EPMC5947148 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data