Browse
Submit Data
Databases
API
Help

Dataset Information

11 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Single-Side Superhydrophobicity in Si3N4-Doped and SiO2-Treated Polypropylene Nonwoven Webs with Antibacterial Activity

ABSTRACT: Meltblown (MB) nonwovens as air filter materials have played an important role in protecting people from microbe infection in the COVID-19 pandemic. As the pandemic enters the third year in this current global event, it becomes more and more beneficial to develop more functional MB nonwovens with special surface selectivity as well as antibacterial activities. In this article, an antibacterial polypropylene MB nonwoven doped with nano silicon nitride (Si3N4), one of ceramic materials, was developed. With the introduction of Si3N4, both the average diameter of the fibers and the pore diameter and porosity of the nonwovens can be tailored. Moreover, the nonwovens having a single-side moisture transportation, which would be more comfortable in use for respirators or masks, was designed by imparting a hydrophobicity gradient through the single-side superhydrophobic finishing of reactive organic/inorganic silicon coprecipitation in situ. After a nano/micro structural SiO2 precipitation on one side of the fabric surfaces, the contact angles were up to 161.7° from 141.0° originally. The nonwovens were evaluated on antibacterial activity, the result of which indicated that they had a high antibacterial activity when the dosage of Si3N4 was 0.6 wt%. The bacteriostatic rate against E. coli and S. aureus was up to over 96%. Due to the nontoxicity and excellent antibacterial activity of Si3N4, this MB nonwovens are promising as a high-efficiency air filter material, particularly during the pandemic.

SUBMITTER: Han M

PROVIDER: S-EPMC9323961 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

High-performance Electret and Antibacterial Polypropylene Meltblown Nonwoven Materials Doped with Boehmite and ZnO Nanoparticles for Air Filtration

Project description: Not available

| S-EPMC9112261 | biostudies-literature

Nonwoven Materials Produced by Melt Electrospinning of Polypropylene Filled with Calcium Carbonate.

Project description:Nowadays, polypropylene-based nonwovens are used in many areas, from filtration to medicine. One of the methods for obtaining such materials is melt electrospinning. In some cases, it is especially interesting to produce composite fibers with a high degree of filling. In this work, the influence of the filling degree of isotactic polypropylene with calcium carbonate on the structure and properties of nonwoven materials obtained by melt electrospinning was studied. It was shown that electrospinning is possible, even at a filler content of 50%, while the average diameter of the fibers increases with the growth in the content of calcium carbonate. The addition of sodium stearate significantly reduces the diameter of the fibers (from 10-65 to 2-10 microns) due to reducing viscosity and increasing the electrical conductivity of the melt. Wide-angle X-ray diffraction analysis and IR spectroscopy reveal that the initial polymer and composites are characterized by the presence of stable ?-form crystals, while nonwovens show a predominance of smectic mesophase. The addition of calcium carbonate leads to an increase in the hydrophobicity of the composite films, the addition of sodium stearate results in a decrease of hydrophobicity, while all nonwovens demonstrate superhydrophobic properties.

| S-EPMC7764975 | biostudies-literature

Electrospun Polyethylene Terephthalate Nonwoven Reinforced Polypropylene Separator: Scalable Synthesis and Its Lithium Ion Battery Performance.

Project description:A novel polyethylene terephthalate nonwoven reinforced polypropylene composite separator (PET/PP) with high thermal stability and low thermal shrinkage characteristic is developed through a scalable production process. In the composite separator, the electronspun polyethylene terephthalate nonwoven layer improves the electrolyte affinity and can sustain as the barrier layer after the shutdown of the polypropylene layer. Due to its high ionic conductivity, the PET/PP separator shows an excellent discharge capacity. In addition, the superior thermal stability of the separator significantly enhances the safety performance of the separator. Considering the feasibility of the large-scale production of the PET/PP separator and its superior battery performance, we expect that the novel separator could be a promising alternative to the existing commercial separators.

| S-EPMC6403667 | biostudies-literature

A Highly Porous Nonwoven Thermoplastic Polyurethane/Polypropylene-Based Triboelectric Nanogenerator for Energy Harvesting by Human Walking.

Project description:: A highly porous nonwoven thermoplastic polyurethane (TPU)/Polypropylene (PP) triboelectric nanogenerator (N-TENG) was developed. To fabricate the triboelectric layers, the TPU nanofiber was directly electrospun onto the nonwoven PP at different basis weights (15, 30, and 50 g/m2). The surface morphologies and porosities of the nonwoven PP and TPU nanofiber mats were characterized by field-emission scanning electron microscopy and porosimetry. The triboelectric performance of the nonwoven TPU/PP based TENG was found to improve with an increase in the basis weight of nonwoven PP. The maximum output voltage and current of the TPU/PP N-TENG with 50% PP basis weight reached 110.18 ± 6.06 V and 7.28 ± 0.67 µA, respectively, due to high air volume of nonwoven without spacers. In order to demonstrate its practical application as a generator, a TPU/PP N-TENG-attached insole for footwear was fabricated. The N-TENG was used as a power source to turn on 57 light-emitting diodes through human-walking, without any charging system. Thus, owing to its excellent energy-conversion performance, simple fabrication process, and low cost, the breathable and wearable nonwoven fiber-based TENG is suitable for large-scale production, to be used in wearable devices.

| S-EPMC7284548 | biostudies-literature

Organic Solvent and Surfactant Resistant Paper-Fluidic Devices Fabricated by One-Step Embossing of Nonwoven Polypropylene Sheet

Project description:In this communication, we report a physical method for the fabrication of organic solvent and surfactant-resistant barriers on paper-based fluidic devices. When nonwoven polypropylene sheet is embossed with a steel mold, the embossed region acts as a physical barrier that can prevent the flow of liquids. Embossed polypropylene barriers not only block water, but also block organic solvents and surfactants, which are known to be difficult to handle on previous paper-based devices. Various amounts of embossing pressures were tested to determine the minimum embossing pressure required for leakproof barrier formation. The compatibility of the barrier was also investigated with several surfactants and organic solvents. As a demonstration, a lysis buffer, which was known to leak through wax-printed barriers, was used to detect Escherichia coli (E. coli) O157:H7. To the best of our knowledge, this paper is the first to report a one-step fabrication method of paper-fluidic devices capable of handling surfactants and organic solvents, including alcohols.

| S-EPMC6190025 | biostudies-literature

Effects of hydroxyapatite-coated nonwoven polyethylene/polypropylene fabric on non-mesodermal lineage-specific differentiation of human adipose-derived stem cells.

Project description:OBJECTIVE:Compared to other stem cells, the multipotency of human adipose-derived mesenchymal stem cells (ASCs) is limited. Effective approaches that trigger or enhance lineage-specific transdifferentiation are highly envisaged in the improvement of ASCs-based cell therapies. Using Immunofluorescence assays and the secretion of cardiac troponin T (cTnT) protein, we studied the impact of two substrates: Hydroxyapatite (HAp)-coated nonwoven polyethylene (PET)/polypropylene (PP) fabric and glass surfaces, representing 3 dimensional (D) and 2 D environments respectively, on the induction of cardiomyocytes - a non-mesodermal cell type from ASCs for 1-5 weeks. RESULTS:ASCs were successfully isolated from human adipose tissue under cGMP conditions. Within 1-3 weeks, expression of cTnT in the induced 3D cultures was overall significantly higher (P?<?0.021) than that in the induced 2D cultures or controls (P?<?0.0009). Remarkably, after 3 weeks of culture, cTnT secretion in the induced 3D cultures gradually declined, nearly reaching levels observed in the 2D cultures. The results show that HAp-coated nonwoven PE/PP fabric could enhance lineage-specific differentiation of ASCs toward cardiac-like cells. However, the fabric might suppress growth of the transformed cells. These preliminary findings encourage further interest in validating the fabric's potential in improving ASCs transdifferentiation.

| S-EPMC7542906 | biostudies-literature

Side-Chain Amino Acid-Based Cationic Antibacterial Polymers: Investigating the Morphological Switching of a Polymer-Treated Bacterial Cell.

Project description:Synthetic polymer-based antimicrobial materials destroy conventional antibiotic resistant microorganisms. Although these antibacterial polymers imitate the properties of antimicrobial peptides (AMPs), their effect on bacterial cell morphology has not been studied in detail. To investigate the morphology change of a bacterial cell in the presence of antimicrobial polymer, herein we have designed and synthesized side-chain amino acid-based cationic polymers, which showed efficient antibacterial activity against Gram-negative (Escherichia coli), as well as Gram-positive (Bacillus subtilis) bacteria. Morphological switching from a rod shape to a spherical shape of E. coli cells was observed by field emission-scanning electron microscopy analysis due to cell wall disruption, whereas the B. subtilis cell structure and size remained intact, but stacks of the cells formed after polymer treatment. The zone of inhibition experiment on an agar plate for E. coli cells exhibited drastic morphological changes at the vicinity of the polymer-treated portion and somewhat less of an effect at the periphery of the plate.

| S-EPMC6044850 | biostudies-literature

Preparation and Performance of Ultra-Fine Polypropylene Antibacterial Fibers via Melt Electrospinning.

Project description:Polypropylene (PP) fibers are employed commonly as the raw material of technical textiles (nonwovens), and the research focuses on fine-denier fibers and their functionalities. In this work, antibacterial PP masterbatches with different dosage (1-5 wt.%) of nano-ZnO particles as the antibacterial agent were prepared via a twin-screw extruder. The as-prepared PP masterbatches were electrospun on a home-made electrospinning device to afford ultra-fine PP fibers. The morphologies of as-spun ultrathin PP fibers with 16 μm of average diameter were observed by SEM. The structure and element distribution were characterized by means of energy-dispersive spectroscopy (EDS) and Fourier-transfer infrared spectroscopy (FTIR), respectively. There was some zinc obviously distributed on the surface when a dosage of ZnO more than 1 wt.% was used, which contributed to the antibacterial activity. The crystallinity of PP fibers was not affected strongly by the dosage of ZnO based on the differential scanning calorimetry (DSC) heating curves, while thermal decomposition improved with the increase in ZnO content, and the mechanical strength decreased predictably with the increase in inorganic ZnO content.

| S-EPMC7182946 | biostudies-literature

Natural Halloysite-Templated Synthesis of Highly Graphitic Boron-Doped Hollow Carbon Nanocapsule Webs.

Project description:Hollow carbon nanocapsules have been attracting growing interest due to their fascinating characteristics and extensive potential applications. In this work, a novel natural halloysite-templated synthesis approach for highly graphitic boron-doped hollow carbon nanocapsule webs (B-HCNCWs) using glucose as the carbon source and boric acid as the heteroatom dopant was first reported. The formation process and physicochemical properties of B-HCNCWs were revealed by SEM, TEM, XRD, Raman, Brunauer-Emmett-Teller (BET), and XPS characterization techniques. The outcomes showed that the as-obtained B-HCNCWs with hollow nanocapsule network architecture had a specific surface area of 263 m2 g-1, a pore volume of 0.8 cm3 g-1, a high degree of graphitization (81.4%), graphite-like interplanar spacing (0.3370 nm), and B-containing functional groups (0.77 at%). The density function theory (DFT) calculation demonstrated that the adsorption energies of Li on B-HCNCWs were much higher than that of HCNCWs, which proved that B-doping in a carbon matrix could increase the lithium intercalation capacity.

| S-EPMC9316536 | biostudies-literature

Management of dislocated transscleral fixated intraocular lens with one-side broken polypropylene suture.

Project description:This video demonstrates the successful surgical technique for refixation of the same intraocular lens (IOL) by tying the same IOL to the sclera with the help of 9-0 polypropylene suture. A 62-year-old male patient presented with sudden loss of vision in the left eye. He had a history of undergoing transscleral fixation of intraocular lens (TSFIOL) using 10-0 polypropylene suture 13 years back for posttraumatic-dislocated nucleus. On examination, we noticed that he had IOL dislocation due to spontaneous breakage of suture of one of the haptic. The other haptic suture was intact. The long-term complication associated with TSFIOL procedure is breakage of the polypropylene suture leading to subluxation or dislocation of the IOL. We used closed-globe approach to successfully fixate the involved haptic of the same IOL. No intraoperative or postoperative complication was encountered in three such cases.

| S-EPMC7508067 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data