Browse
Submit Data
Databases
API
Help

Dataset Information

32 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

AuAg Nanoparticles Grafted on TiO₂@N-Doped Porous Carbon: Improved Depletion of Ciprofloxacin under Visible Light through Plasmonic Photocatalysis.

ABSTRACT: TiO₂ nanoparticles (NPs) were modified to obtain photocatalysts with different composition sophistication and displaying improved visible light activity. All of them were evaluated in the photodegradation of ciprofloxacin. The band gap of TiO₂ NPs was successfully tailored by the formation of an N-doped porous carbon (NPC)-TiO₂ nanohybrid through the pyrolysis of melamine at 600 °C, leading to a slight red-shift of the absorption band edge for nanohybrid NPC-TiO₂ 1. In addition, the in-situ formation and grafting of plasmonic AuAg NPs at the surface of NPC sheets and in close contact with TiO₂ NPs leads to AuAg-NPC-TiO₂ nanohybrids 2-3. These nanohybrids showed superior photocatalytic performance for the degradation of ciprofloxacin under visible light irradiation, compared to pristine P25 TiO₂ NPs or to AuAg-PVP-TiO₂ nanohybrid 4 in which polyvinylpyrrolidone stabilized AuAg NPs were directly grafted to TiO₂ NPs. The materials were characterized by transmission electron microscope (TEM), High Angle Annular Dark Field-Scanning Transmission Electron Microscopy-Energy Dispersive X-ray Spectroscopy HAADF-STEM-EDS, X-ray photoelectron spectroscopy and solid UV-vis spectroscopy. Moreover, the active species involved in the photodegradation of ciprofloxacin using AuAg-NCS-TiO₂ nanohybrids were evaluated by trapping experiments to propose a mechanism for the degradation.

SUBMITTER: Jimenez-Salcedo M

PROVIDER: S-EPMC9329855 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Mechano-synthesized orange TiO2 shows significant photocatalysis under visible light.

Project description:Nitrogen and carbon co-doped TiO2 particles with a brilliant yellow-orange color were produced mechanochemically by high-energy ball milling as one-pot synthesis. This facile synthesis required only grinding TiO2 with melamine at room temperature. Using monochoromatic lights with the same intensity in visible and UV, the photocatalytic activity of the TiO2 particles was accurately evaluated with respect to the degradation of an aqueous dye (methylene blue) solution. The activities under visible light (450 and 500?nm) were, respectively, 4 and 2 times higher than that of the unmilled TiO2 under UV light (377?nm), corresponding to 9 and 5 times higher than the UV under the solar light condition. The properties and structure of the co-doped TiO2 particles before and after milling were analyzed using eight experimental methods. As a result, it was found that the nitrogen replaced as an oxygen site in milled TiO2 has the highest concertation (2.3%) in the past studies and the structure of milled TiO2 is composed of a polymorphism of four different solid phases of TiO2, gives significant higher photocatalytic activity at visible light than that of UV light. A good repeatability of the photocatalyst was investigated by the number of cycles for the decomposition reaction of the aquesous dye solution.

| S-EPMC6195626 | biostudies-literature

TiOxNy Modified TiO2 Powders Prepared by Plasma Enhanced Atomic Layer Deposition for Highly Visible Light Photocatalysis.

Project description:In this work, TiN film deposited by plasma enhanced atomic layer deposition (PEALD) is adopted to modify the commercial anatase TiO2 powders. A series of analyses indicate that the surface modification of 20, 50 and 100 cycles of TiN by PEALD does not change the morphology, crystal size, lattice parameters, and surface area of TiO2 nano powders, but forms an ultrathin amorphous layer of nitrogen doped TiO2 (TiOxNy) on the powder surfaces. This ultrathin TiOxNy can facilitate the absorption of TiO2 in visible light spectrum. As a result, TiOxNy coated TiO2 powders exhibit excellent photocatalytic degradation towards methyl orange under the visible light with good photocatalytic stability compared to pristine TiO2 powders. TiOxNy (100 cycles PEALD TiN) coated TiO2 powders exhibit the excellent photocatalytic activity with the degradation efficiency of 96.5% in 2?hours, much higher than that of pristine TiO2 powder of only 4.4%. These results clearly demonstrate that only an ultrathin surface modification layer can dramatically improve the visible light photocatalytic activity of commercial TiO2 powders. Therefore, this surface modification using ALD is an extremely promising route to prepare visible light active photocatalysts.

| S-EPMC6092356 | biostudies-literature

Enhanced photocatalytic activity of Se-doped TiO2 under visible light irradiation.

Project description:Anatase TiO2 is a typical photocatalyst, and its excellent performance is limited in ultraviolet light range due to its wide band gap of 3.2?eV. A series of Se-doped TiO2 nanoparticles in anatase structure with various Se concentrations up to 17.1?at.% were prepared using sol-gel method. The doped Se ions are confirmed to be mainly in the valence state of?+?4, which provides extra electronic states in the band gap of TiO2. The band gap is effectively narrowed with the smallest gap energy of 2.17?eV, and the photocatalytic activity is effectively improved due to the extended absorption range. The photocatalytic activity was evaluated by the degradation of Rhodamine B (RhB) in aqueous solution under visible light irradiation. The results show that Se doping significantly improves the photocatalytic activity of TiO2 and 13.63?at.% Se-doped TiO2 has the best performance.

| S-EPMC5993730 | biostudies-literature

Noble Metal-Free TiO2-Coated Carbon Nitride Layers for Enhanced Visible Light-Driven Photocatalysis.

Project description:Composites of g-C3N4/TiO2 were one-step prepared using electron impact with dielectric barrier discharge (DBD) plasma as the electron source. Due to the low operation temperature, TiO2 by the plasma method shows higher specific surface area and smaller particle size than that prepared via conventional calcination. Most interestingly, electron impact produces more oxygen vacancy on TiO2, which facilitates the recombination and formation of heterostructure of g-C3N4/TiO2. The composites have higher light absorption capacity and lower charge recombination efficiency. g-C3N4/TiO2 by plasma can produce hydrogen at a rate of 219.9 ?mol·g-1·h-1 and completely degrade Rhodamine B (20mg·L-1) in two hours. Its hydrogen production rates were 3 and 1.5 times higher than that by calcination and pure g-C3N4, respectively. Electron impact, ozone and oxygen radical also play key roles in plasma preparation. Plasma has unique advantages in metal oxides defect engineering and the preparation of heterostructured composites with prospective applications as photocatalysts for pollutant degradation and water splitting.

| S-EPMC7221541 | biostudies-literature

Quasi-homogenous photocatalysis of quantum-sized Fe-doped TiO2 in optically transparent aqueous dispersions.

Project description:In this study, the preparation of anatase TiO2 nanocrystals via a facile non-aqueous sol-gel route and their characterization are reported. The 3-4 nm particles are readily dispersable in aqueous media and show excellent photoreactivity in terms of rhodamine B degradation. The catalytic performance can be further increased considerably by doping with iron and UV-light irradiation as a pre-treatment. The effect of surface ligands (blocked adsorption sites, surface defects etc.) on the photoreactivity was thoroughly probed using thermogravimetric analysis combined with mass spectrometry. Photoelectrochemical characterization of thin-film electrodes made from the same TiO2 nanocrystals showed the opposite trend to the catalytic experiments, that is, a strong decrease in photocurrent and quantum efficiency upon doping due to introduction of shallow defect states.

| S-EPMC8417263 | biostudies-literature

Plasmonic Pt nanoparticles-TiO2 hierarchical nano-architecture as a visible light photocatalyst for water splitting.

Project description:Visible light-driven water splitting (VLWS) into hydrogen and oxygen is attractive and depends on efficient photocatalysts. Herein, we demonstrate the first exploration of the capability to control the morphology of nanostructured TiO2 in conjunction with the choice of a suitable plasmonic metal (PM) to fabricate novel photocatalysts that are capable of harvesting visible light for more efficient VL-fuel conversion. This methodology affords us to successful access to the novel plasmonic Pt/TiO2-HA (large Pt nanoparticles (NPs) supported on TiO2 hierarchical nano-architecture (TiO2-HA)) photocatalysts that exhibit plasmon absorption in the visible range and consequent outstanding activity and durability for VLWS. Particularly, the Pt/TiO2-HA shows an excellent photocatalytic activity for overall water splitting rather than only for hydrogen evolution (HE), which is superior to those of the conventional plasmonic Au/TiO2 photocatalysts. The synergistic effects of the high Schottky barrier at the Pt-TiO2-HA interface, which induces the stronger reduction ability of hot electrons, and intrinsic Pt catalytic activity are responsible for the exceptional photocatalytic performance of Pt/TiO2-HA and simplify the composition of plasmonic photocatalysts.

| S-EPMC6212491 | biostudies-literature

Three-dimensional plasmonic Ag/TiO2 nanocomposite architectures on flexible substrates for visible-light photocatalytic activity.

Project description:In this study, a periodic three-dimensional (3D) Ag/TiO2 nanocomposite architecture of nanowires was fabricated on a flexible substrate to enhance the plasmonic photocatalytic activity of the composite. Layer-by-layer nanofabrication based on nanoimprint lithography, vertical e-beam evaporation, nanotransfer, and nanowelding was applied in a new method to create different 3D Ag/TiO2 nanocomposite architectures. The fabricated samples were characterized by scanning electron microscopy, transmission electron microscopy, focused ion-beam imaging, X-ray photoelectron spectrometry, and UV-visible spectroscopy. The experiment indicated that the 3D nanocomposite architectures could effectively enhance photocatalytic activity in the degradation of methylene blue solution under visible light irradiation. We believe that our method is efficient and stable, which could be applied to various fields, including photocatalysis, solar energy conversion, and biotechnology.

| S-EPMC5566718 | biostudies-literature

Superior visible light antimicrobial performance of facet engineered cobalt doped TiO2 mesocrystals in pathogenic bacterium and fungi.

Project description:Pristine and Co-doped TiO2 mesocrystals have been synthesized via a simple sol-gel method and their antimicrobial activity has been investigated. The antimicrobial performance was evaluated in terms of zone of inhibition, minimum inhibitory concentration (MIC), antibiofilm activity, and effect of UV illumination in liquid media. The Co-doped TiO2 mesocrystals showed very promising MIC of 0.390 ?g/mL and 0.781 ?g/mL for P. mirabilis and P. mirabilis, respectively. Additionally, the material showed an MIC of 12.5 ?g/mL against C. albicans, suggesting its use as antifungal agent. Upon the addition of 10.0 µg/mL of Co-doped TiO2 mesocrystals, the biofilm inhibition% reaches 84.43% for P. aeruginosa, 78.58% for P. mirabilis, and 77.81% for S. typhi, which can be ascribed to the created active oxygen species that decompose the tested microbial cells upon illumination. Thus the fabricated Co-doped TiO2 mesocrystals exhibit sufficient antimicrobial features under visible light, qualifying them for use as antimicrobial agents against pathogenic bacteria and fungi and subsequently inhibit their hazardous effects.

| S-EPMC7946932 | biostudies-literature

Dual Functional S-Doped g-C₃N₄ Pinhole Porous Nanosheets for Selective Fluorescence Sensing of Ag⁺ and Visible-Light Photocatalysis of Dyes.

Project description:This study explores the facile, template-free synthesis of S-doped g-C₃N₄ pinhole nanosheets (SCNPNS) with porous structure for fluorescence sensing of Ag⁺ ions and visible-light photocatalysis of dyes. As-synthesized SCNPNS samples were characterized by various analytical tools such as XRD, FT-IR, TEM, BET, XPS, and UV⁻vis spectroscopy. At optimal conditions, the detection linear range for Ag⁺ was found to be from 0 to 1000 nM, showing the limit of detection (LOD) of 57 nM. The SCNPNS exhibited highly sensitive and selective detection of Ag⁺ due to a significant fluorescence quenching via photo-induced electron transfer through Ag⁺⁻SCNPNS complex. Moreover, the SCNPNS exhibited 90% degradation for cationic methylene blue (MB) dye within 180 min under visible light. The enhanced photocatalytic activity of the SCNPNS was attributed to its negative zeta potential for electrostatic interaction with cationic dyes, and the pinhole porous structure can provide more active sites which can induce faster transport of the charge carrier over the surface. Our SCNPNS is proposed as an environmental safety tool due to several advantages, such as low cost, facile preparation, selective recognition of Ag⁺ ions, and efficient photocatalytic degradation of cationic dyes under visible light.

| S-EPMC6384794 | biostudies-literature

Immobilization of TiO₂ Nanoparticles on Chlorella pyrenoidosa Cells for Enhanced Visible-Light-Driven Photocatalysis.

Project description:TiO₂ nanoparticles are immobilized on chlorella cells using the hydrothermal method. The morphology, structure, and the visible-light-driven photocatalytic activity of the prepared chlorella/TiO₂ composite are investigated by various methods. The chlorella/TiO₂ composite is found to exhibit larger average sizes and higher visible-light intensities. The sensitization of the photosynthesis pigment originating from chlorella cells provides the anatase TiO₂ with higher photocatalytic activities under the visible-light irradiation. The latter is linked to the highly efficient charge separation of the electron/hole pairs. The results also suggest that the photocatalytic activity of the composite remains substantial after four cycles, suggesting a good stability.

| S-EPMC5459020 | biostudies-literature