Debromination and Reusable Glass Fiber Recovery from Large Waste Circuit Board Pieces in Subcritical Water Treatment
Ontology highlight
ABSTRACT:
SUBMITTER: Gandon-Ros G
PROVIDER: S-EPMC9330217 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:The recovery of precious metals from waste printed circuit boards (PCBs) is an effective recycling process. This paper presents a promising hydrometallurgical process to recover precious metals from waste PCBs. To simplify the metal leaching process, large pieces of PCBs were used instead of a pulverized sample. The chemical coating present on the PCBs was removed by sodium hydroxide (NaOH) treatment prior to the hydrometallurgical treatment. Among the leaching reagents examined, hydrochloric acid (HCl) showed great potential for the recovery of metals. The HCl-mediated leaching of waste PCBs was investigated over a range of conditions. Increasing the acid concentration decreased the time required for complete metal recovery. The shaking speed showed a pronounced positive effect on metal recovery, but the temperature showed an insignificant effect. The results showed that 1 M HCl recovered all of the metals from 4 cm × 4 cm PCBs at room temperature and 150 rpm shaking speed in 22 h.
| S-EPMC4586516 | biostudies-other
Project description:A glass fiber-epoxy resin (GFER) framework derived from mixed waste printed circuit boards (MWPCBs) was utilized to prepare a cost-effective, reusable Mo-Cu bimetallic Bronsted-Lewis solid acid catalyst through wet-impregnation under near-infrared radiation (NIRR) activation. The efficacy of the novel Mo-Cu catalyst was assessed in the synthesis of glucose through hydrolysis of jute (Corchorus olitorius) fiber, and the process parameters were optimized (Mo precursor loading: 1.0 wt %, catalyst concentration: 5 wt %, hydrolysis temperature: 80 °C, and hydrolysis time: 10 min) through Taguchi orthogonal design. The GFER support and the prepared catalysts were characterized through thermogravimetric, X-ray diffraction (XRD), Fourier-transform infrared (FTIR), Brunauer-Emmett-Teller (BET)-density functional theory, and TPD analyses. The optimal Mo-Cu catalyst and the GFER support possessed 45.377 and 7.049 m2/g BET area, 0.04408 and 0.02317 cc/g pore volume, 1.9334 and 0.7482 nm modal pore size, and surface acidity of 0.48 and 0.40 mmol NH3/g catalyst, respectively. X-ray photoelectron spectroscopy bands confirmed the coexistence of Mo6+ and Cu2+ species; XRD and FTIR analyses indicated the presence of MoO3 and CuO crystalline phases in all prepared catalysts. The optimal catalyst prepared through NIRR (wavelength 0.75-1.4 μm)-activated hydrothermal treatment resulted in a significantly greater glucose yield (75.84 mol %) than that achieved (53.64 mol %) using a conventionally prepared catalyst. Thus, an energy-efficient application of NIRR (100 W) could significantly improve catalytic properties over conventional hydrothermal treatment (500 W). The present investigation provides an innovative application of MWPCB-derived GFER as a promising cost-effective support for the preparation of highly efficient inexpensive solid catalysts for sustainable synthesis of glucose from low-cost waste jute fiber.
| S-EPMC6643727 | biostudies-literature
Project description:With the increasing amount of electronic waste (e-waste) generated globally, it is an enormous challenge to recycle printed circuit boards (PCBs) efficiently and environmentally friendly. However, conventional recycling technologies have low efficiency and require tough treatment such as high temperature (>200?°C) and high pressure. In this paper, a small-molecule assisted approach based on dynamic reaction was proposed to dissolve thermosetting polymers containing ester groups and recycle electronic components from PCBs. This effective approach operates below 200?°C and the polymer could be dissolved in a short time. It has a remarkable ability to recycle a wide range of commercial PCBs, including boards made of typical anhydride epoxy or polyester substrate. Besides, it is environmentally friendly as even the recycling solution could be reused multiple times. In addition, the wasted solution after recycling could be used for board bonding and damage repair. This work also demonstrates the advantage of using polymers containing ester groups as the PCB substrate in consideration of eco-friendly and efficient recycling.
| S-EPMC6884634 | biostudies-literature
Project description:There is an increased interest in recycling valuable waste materials for usage in procedures with high added values. Silica microparticles are involved in the processes of catalysis, separation, immobilization of complexants, biologically active compounds, and different nanospecies, responding to restrictive requirements for selectivity of various chemical and biochemical processes. This paper presents the surface modification of accessible and dimensionally controlled recycled silica microfiber with titanium dioxide. Strong base species in organic solvents: methoxide, ethoxide, propoxide, and potassium butoxide in corresponding alcohol, activated the glass microfibres with 12-13 µm diameter. In the photo-oxidation process of a toxic micro-pollutant, cyclophosphamide, the new composite material successfully proved photocatalytic effectiveness. The present work fulfills simultaneously two specific objectives related to the efforts directed towards a sustainable environment and circular economy: recycling of optical glass microfibers resulted as waste from the industry, and their usage for the photo-oxidation of highly toxic emerging micro-pollutants.
| S-EPMC6954219 | biostudies-literature
Project description:Detailed research is carried out to ascertain the inhibitory effect of waste glass powder (WGP) on alkali-silica reaction (ASR) expansion induced by waste glass aggregate in this paper. The alkali reactivity of waste glass aggregate is examined by two methods in accordance with the China Test Code SL352-2006. The potential of WGP to control the ASR expansion is determined in terms of mean diameter, specific surface area, content of WGP and curing temperature. Two mathematical models are developed to estimate the inhibitory efficiency of WGP. These studies show that there is ASR risk with an ASR expansion rate over 0.2% when the sand contains more than 30% glass aggregate. However, WGP can effectively control the ASR expansion and inhibit the expansion rate induced by the glass aggregate to be under 0.1%. The two mathematical models have good simulation results, which can be used to evaluate the inhibitory effect of WGP on ASR risk.
| S-EPMC5455400 | biostudies-other
Project description: Not available
| S-EPMC11243445 | biostudies-literature
Project description:Seesaw circuits are essential for molecular computing and biosensing. However, a notable limitation of seesaw circuits lies in the irreversible depletion of components, precluding the attainment of system recovery and rendering nucleic acid circuits non-reusable. We developed a brand-new method for creating controllable and reusable seesaw circuits. By using the nicking endonucleases Nt.BbvCI and Nt.Alwi, we removed "functional components" while keeping the "skeletal components" for recurrent usage. T-inputs were introduced, increasing the signal-to-noise ratio of AND logic from 2.68 to 11.33 and demonstrating compatibility. We identified the logic switching feature and verified that it does not impair circuit performance. We also built intricate logic circuits, such as OR-AND gate, to demonstrate the versatility of our methodology. This controllable reusability extends the applications of nanotechnology and bioengineering, enhancing the practicality and efficiency of these circuits across various domains.
| S-EPMC10983715 | biostudies-literature
Project description:Silica-based carrier is a promising material for recovery of metal and nonmetal contaminants in chemical oxo-precipitation-fluidized bed crystallization (COP-FBC) system. Boron species are an essential element for plant growth and can cause health concerns in human beings at high concentrations in water environments. The composition of thin-film transistor liquid crystal display (TFT-LCD) contains a wide variety of metal oxides and can be tailored as promising functional mesoporous carriers for boron crystallization recovery in the presence of barium ions and hydrogen peroxide. In this study, waste-derived mesoporous aluminosilicate (MAS) nanomaterial in the presence of barium ions and hydrogen peroxide was used as a carrier for sustainable recovery of crystallized boron, a priority wastewaters pollutant. The MAS shows the hierarchically homogeneous distribution of nanostructured aluminosilicate particles with an average size of 12.8 ± 3.6 nm on the surface after the activation with Na2CO3 at 1000 °C. Moreover, the negatively charged surface and the mesoporous structure of MAS enhance the adsorption of Ba2+ onto MAS, and the Langmuir adsorption capacity of 105 mg/g is achieved, which is conducive to the enhancement of the recovery of boron species. Moreover, the recovery efficiency and crystallization ratio of boron by MAS can be up to 84.5 and 93.4%, respectively. The cross-sectional scanning electron microscopy images and the high-temperature X-ray diffraction results confirm the boron recovery mechanism that the negatively charged functional group as well as the mesoporosity of MAS triggers the rapid formation of needle-shaped precipitates of barium peroxoborate, and then converted to barium borate after calcination at 1050 °C. Results obtained in this study clearly demonstrate the possibility of fabricating environmentally benign mesoporous aluminosilicate adsorbents from TFT-LCD waste to sustainably recover and crystallize boron species from water and wastewater in COP-FBC.
| S-EPMC6714614 | biostudies-literature
Project description:Fiber-reinforced ceramic-matrix composites are advanced, temperature resistant materials with applications in aerospace engineering. Their analysis involves the detection and separation of fibers, embedded in a fiber bed, from an imaged sample. Currently, this is mostly done using semi-supervised techniques. Here, we present an open, automated computational pipeline to detect fibers from a tomographically reconstructed X-ray volume. We apply our pipeline to a non-trivial dataset by Larson et al. To separate the fibers in these samples, we tested four different architectures of convolutional neural networks. When comparing our neural network approach to a semi-supervised one, we obtained Dice and Matthews coefficients reaching up to 98%, showing that these automated approaches can match human-supervised methods, in some cases separating fibers that human-curated algorithms could not find. The software written for this project is open source, released under a permissive license, and can be freely adapted and re-used in other domains.
| S-EPMC8810976 | biostudies-literature
Project description:Saturable absorption in bismuth-doped glasses was found to have a noticeable influence on soliton interaction and group formation. This phenomenon, observed in 1450 nm mode-locked bismuth-doped fiber laser, shows the distinct feature of the multiple pulse regime, which appears as a stationary pulse group whose length can be spread over the whole cavity length by variation of the pump power and polarization. Pulse positioning within the ensemble depends on the saturation fluence and the relatively fast recovery dynamics of bismuth fiber.
| S-EPMC5382671 | biostudies-literature