Red, green, and blue light-emitting carbon dots prepared from gallic acid for white light-emitting diode applications.
Ontology highlight
ABSTRACT:
SUBMITTER: Chen M
PROVIDER: S-EPMC9419665 | biostudies-literature | 2021 Dec
REPOSITORIES: biostudies-literature
Publications
Red, green, and blue light-emitting carbon dots prepared from gallic acid for white light-emitting diode applications.
Chen Menglin M Liu Can C An Yulong Y Li Yan Y Zheng Yunwu Y Tian Hao H Shi Rui R He Xiahong X Lin Xu X
Nanoscale advances 20211118 1
Red, green, and blue CDs were successfully prepared by a solvothermal method using gallic acid as the raw material. The distinct optical features of these CDs are based on the differences in the size of their sp<sup>2</sup>-domains, which can be governed by reaction solvents. ...[more]
Similar Datasets
Project description:Carbon dots (CDs), as the most important type of carbon-based material, have been widely used in many fields because of their excellent properties. In particular, multicolor fluorescent CDs with high photoluminescence quantum yield are the focus of active research. Herein, red, green and blue CDs (RGB CDs) were successfully synthesized by a solvothermal method from o-phenylenediamine under different reaction conditions. The RGB-CDs have stable optical properties and significant photoluminescence characteristics. Structural and elemental analyses propose a conjugated structure and the surface state of the CDs as the main causes for the different color emission of RGB-CDs. In addition, a white fluorescent CD solution was prepared by mixing these multicolor fluorescent CDs in appropriate proportions.
| S-EPMC9037611 | biostudies-literature
Project description:Deformable full-colour light-emitting diodes with ultrafine pixels are essential for wearable electronics, which requires the conformal integration on curvilinear surface as well as retina-like high-definition displays. However, there are remaining challenges in terms of polychromatic configuration, electroluminescence efficiency and/or multidirectional deformability. Here we present ultra-thin, wearable colloidal quantum dot light-emitting diode arrays utilizing the intaglio transfer printing technique, which allows the alignment of red-green-blue pixels with high resolutions up to 2,460 pixels per inch. This technique is readily scalable and adaptable for low-voltage-driven pixelated white quantum dot light-emitting diodes and electronic tattoos, showing the best electroluminescence performance (14,000 cd m(-2) at 7 V) among the wearable light-emitting diodes reported up to date. The device performance is stable on flat, curved and convoluted surfaces under mechanical deformations such as bending, crumpling and wrinkling. These deformable device arrays highlight new possibilities for integrating high-definition full-colour displays in wearable electronics.
| S-EPMC4479007 | biostudies-literature
Project description:Organic light-emitting diodes (OLEDs) have been established as versatile light sources that allow for easy integration in large-area surfaces and flexible substrates. In addition, the low fabrication cost of OLEDs renders them particularly attractive as general lighting sources. Current methods for the fabrication of white-light OLEDs rely on the combination of multiple organic emitters and/or the incorporation of multiple cavity modes in a thick active medium. These architectures introduce formidable challenges in both device design and performance improvements, namely, the decrease of efficiency with increasing brightness (efficiency roll-off) and short operational lifetime. Here we demonstrate, for the first time, white-light generation in an OLED consisting of a sub-100 nm thick blue single-emissive layer coupled to the photonic Bragg modes of a dielectric distributed Bragg reflector (DBR). We show that the Bragg modes, although primarily located inside the DBR stack, can significantly overlap with the emissive layer, thus efficiently enhancing emission and outcoupling of photons at selected wavelengths across the entire visible light spectrum. Moreover, we show that color temperature can be tuned by the DBR parameters, offering great versatility in the optimization of white-light emission spectra.
| S-EPMC6875896 | biostudies-literature
Project description:The economic viability and energy use of vertical farms strongly depend on the efficiency of the use of light. Increasing far-red radiation (FR, 700-800 nm) relative to photosynthetically active radiation (PAR, 400-700 nm) may induce shade avoidance responses including stem elongation and leaf expansion, which would benefit light interception, and FR might even be photosynthetically active when used in combination with PAR. The aims of this study are to investigate the interaction between FR and planting density and to quantify the underlying components of the FR effects on growth. Lettuce (Lactuca sativa cv. Expertise RZ) was grown in a climate chamber under two FR treatments (0 or 52 μmol m-2 s-1) and three planting densities (23, 37, and 51 plants m-2). PAR of 89% red and 11% blue was kept at 218 μmol m-2 s-1. Adding FR increased plant dry weight after 4 weeks by 46-77% (largest effect at lowest planting density) and leaf area by 58-75% (largest effect at middle planting density). Radiation use efficiency (RUE: plant dry weight per unit of incident radiation, 400-800 nm) increased by 17-42% and incident light use efficiency (LUEinc: plant dry weight per unit of incident PAR, 400-700 nm) increased by 46-77% by adding FR; the largest FR effects were observed at the lowest planting density. Intercepted light use efficiency (LUEint: plant dry weight per unit of intercepted PAR) increased by adding FR (8-23%). Neither specific leaf area nor net leaf photosynthetic rate was influenced by FR. We conclude that supplemental FR increased plant biomass production mainly by faster leaf area expansion, which increased light interception. The effects of FR on plant dry weight are stronger at low than at high planting density. Additionally, an increased LUEint may contribute to the increased biomass production.
| S-EPMC7845693 | biostudies-literature
Project description:In this work, multicolor fluorescent carbon dots with red (R-CDs), yellow (Y-CDs), and blue (B-CDs) emissions were prepared by choosing proper aromatic precursors with different amounts of benzene rings through a simple solvothermal method. The characterization showed that the prepared carbon dots were spherical with a size under 10 nm, rich surface functional groups, and good stability. The emission wavelengths were located at 440, 530, and 580 nm under the excitation of 370 nm. The relative fluorescence quantum yield (QY) of R-CDs, Y-CDs, and B-CDs was 11%, 59%, and 33%, respectively. The related characterization demonstrated that the redshift in the photoluminescence was caused by the synergistic effect of the increasing graphitic nitrogen content, quantum size effect and surface oxidation state. By mixing the three prepared CDs into a PVA matrix, the transparent and flexible films produced relucent blue, yellow, and red emissions under 365 nm UV light, and solid-state quenching was effectively avoided. LEDs were fabricated by using B-CDs, Y-CDs, and R-CDs/PVA with a semiconductor chip. These CDs-based LEDs produced bright blue, yellow, and red light with CIE color coordinates of (0.16, 0.02), (0.38, 0.58), and (0.50, 0.49) were successfully manufactured utilizing the prepared blue, yellow and red multicolor carbon dots as the solid luminescent materials. The results showed that the synthesized CDs can be potentially applied in multi-color monitors as a promising candidate for light-emitting diodes (LEDs). This work blazes a novel trail for the controllable preparation of multicolor fluorescent carbon dots.
| S-EPMC10096300 | biostudies-literature
Project description:Supplemental interlighting is commonly used in modern greenhouses to improve light deficiency, but the light spectrum affects fruit quality and color change. This study aimed to analyze the effect of interlighting with red, blue, and additional far-red light on the fruit qualities and carotenoid contents of red and yellow sweet peppers (Capsicum annuum L.). Three light treatments were applied: natural light (NL), NL with red + blue LED interlighting (71 μmol m-2 s-1) (RB), and RB with far-red light (55 μmol m-2 s-1) (RBFR). Ascorbic acid, free sugars, and individual carotenoid content were quantified with HPLC analysis. Fruits were sampled on 2020.11.14 (Group 1) and 2021.01.03 (Group 2) from the plants grown under average light intensities of 335.9 and 105.6 μmol m-2 s-1, respectively. In the overall period, total yields in RB and RBFR were 22 and 33% higher than those in NL in red fruits and 2 and 21% higher in yellow fruits, respectively. In both colored fruits, ascorbic acid, total soluble sugar, and carotenoid content were higher in RB and RBFR than NL. In Group 1, ascorbic acid and total soluble sugar were significantly different between RB and RBFR only in red fruits. In Group 2, ascorbic acids in red and yellow fruits were 9 and 3% higher in RBFR than RB but total soluble sugars were 4 and 2% lower, respectively. Carotenoid contents in red and yellow fruits were 3.0- and 2.1-fold higher in RB and 2.0- and 1.4-fold higher in RBFR than those in NL, respectively. In this study, interlighting had a significant impact on fruit quality in Group 2, mainly due to the increase in the ratio of interlighting to total light by seasonal changes. In particular, red and yellow fruit yields were 9% and 19% higher in RBFR than RB, but carotenoid contents were 26 to 9% lower, respectively. This result exhibited that additional far-red lighting has a trade-off relationship between fruit yield and carotenoid content. Thus, it is necessary to provide an adequate light spectrum according to a specific cultivation purpose, such as improving yield or accumulating plastids in fruits.
| S-EPMC9253827 | biostudies-literature
Project description:White organic light-emitting diodes (WOLEDs) have several desirable features, but their commercialization is hindered by the poor stability of blue light emitters and high production costs due to complicated device structures. Herein, we investigate a standard blue emitting hole transporting material (HTM) N,N'-bis(naphthalen-1-yl)-N,N'-bis(phenyl)benzidine (NPB) and its exciplex emission upon combining with a suitable electron transporting material (ETM), 3-(biphenyl-4-yl)-5-(4-tert-butylphenyl)-4-phenyl-4H-1,2,4-triazole (TAZ). Blue and yellow OLEDs with simple device structures are developed by using a blend layer, NPB:TAZ, as a blue emitter as well as a host for yellow phosphorescent dopant iridium (III) bis(4-phenylthieno[3,2-c]pyridinato-N,C2')acetylacetonate (PO-01). Strategic device design then exploits the ambipolar charge transport properties of tetracene as a spacer layer to connect these blue and yellow emitting units. The tetracene-linked device demonstrates more promising results compared to those using a conventional charge generation layer (CGL). Judicious choice of the spacer prevents exciton diffusion from the blue emitter unit, yet facilitates charge carrier transport to the yellow emitter unit to enable additional exciplex formation. This complementary behavior of the spacer improves the blue emission properties concomitantly yielding reasonable yellow emission. The overall white light emission properties are enhanced, achieving CIE coordinates (0.36, 0.39) and color temperature (4643 K) similar to daylight. Employing intermolecular exciplex emission in OLEDs simplifies the device architecture via its dual functionality as a host and as an emitter.
| S-EPMC10721783 | biostudies-literature
Project description:We demonstrated a novel microfluidic white organic light-emitting diode (microfluidic WOLED) based on integrated sub-100-μm-wide microchannels. Single-μm-thick SU-8-based microchannels, which were sandwiched between indium tin oxide (ITO) anode and cathode pairs, were fabricated by photolithography and heterogeneous bonding technologies. 1-Pyrenebutyric acid 2-ethylhexyl ester (PLQ) was used as a solvent-free greenish-blue liquid emitter, while 2,8-di-tert-butyl-5,11-bis(4-tert-butylphenyl)-6,12-diphenyltetracene (TBRb)-doped PLQ was applied as a yellow liquid emitter. In order to form the liquid white light-emitting layer, the greenish-blue and yellow liquid emitters were alternately injected into the integrated microchannels. The fabricated electro-microfluidic device successfully exhibited white electroluminescence (EL) emission via simultaneous greenish-blue and yellow emissions under an applied voltage of 100 V. A white emission with Commission Internationale de l'Declairage (CIE) color coordinates of (0.40, 0.42) was also obtained; the emission corresponds to warm-white light. The proposed device has potential applications in subpixels of liquid-based microdisplays and for lighting.
| S-EPMC4594091 | biostudies-literature
Project description:The use of organic light-emitting diodes (OLEDs) has rapidly increased in recent years. However, the effect of OLEDs on human health has not been studied yet. We investigated morphologic and functional changes after OLEDs exposure of human ocular cells, including corneal, conjunctival, lens, and retinal pigment epithelial cells, and mouse eyes. In corneal and conjunctival epithelial cells, the levels of reactive oxygen species production and interleukin-8 expression after white light-emitting diodes (LED) exposure were significantly greater than those after OLED exposure. Although no gross morphologic changes of the eyelid or cornea were found in LED- or OLED-exposed mice, oxidative stress on ocular surface was significantly increased, and the outer nuclear layer (ONL) was significantly shorter in both light-treated groups than the control group. Moreover, ONL thickness was significantly lower in the LED group than the OLED group. The electroretinography response was significantly lower in light exposure group, and there was significant difference between LED- and OLED-treated mice. Although OLED exhibits certain ocular toxicity, it can be less toxic to eyes than LED. The higher blue-wavelength energy of LED light might be the reason for its higher toxicity relative to OLED.
| S-EPMC7360575 | biostudies-literature
Project description:Heteroatom doped carbon dots (CDs) with color adjustable properties have attracted extensive attention. The doping of elements can effectively tune the surface chemical properties of CDs, thus resulting in its multi-functional applications such as in bio-imaging, photocatalysis, and photothermal conversion. The facile preparation of single metal-doped CDs with color-tunable properties has been rarely reported yet. Herein, we report a one-step solvothermal method to synthesize CDs with different fluorescent emission varying from red to purple to blue. The luminescence characteristic of CDs can be tuned by simply controlling the ratio of precursors, with the emission wavelength correspondingly adjusted from 610 nm to 390 nm. XPS investigation further demonstrated that the color variation is mainly due to the doping of zinc, which will increase the degree of surface oxidation in the as-prepared CDs. For blue emission CDs, the content of graphitic carbon gradually decreases with the rising of zinc chloride addition, while oxygen content remains around 20%, compared with red emission CDs of which the oxygen content is only 4.42%. We also demonstrated with theoretical simulations that the Zn dopant and the functional groups including -C[double bond, length as m-dash]O, -C-OH, -NH2, and pyrrolic N, play an important role in color change. Furthermore, the synthesized CDs have been successfully used into the fabrication of white LEDs. More than that, we produced a sensitive sensor from the prepared CDs for the effective detection of a variety of colorless transparent organic solvents utilizing the robust fluorescence properties of CDs, showing their great potential as fluorescent probes for chemical sensing.
| S-EPMC9062395 | biostudies-literature