Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Fabrication of Na_0.4MnO₂ Microrods for Room-Temperature Oxidation of Sulfurous Gases.

ABSTRACT: Phase pure Na_0.4MnO₂ microrods crystallized in the orthorhombic symmetry were fabricated for the wet oxidation of H₂S and SO₂ gases at room temperature. The material was found highly effective for the mineralization of low concentrations of acidic gases. The material was fully regenerable after soaking in a basic H₂O₂ solution.

SUBMITTER: Gupta NK

PROVIDER: S-EPMC9608406 | biostudies-literature | 2022 Oct

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Fabrication of Na0.4MnO2 Microrods for Room-Temperature Oxidation of Sulfurous Gases.

Gupta Nishesh Kumar NK Achary Srungarpu N SN Viltres Herlys H Bae Jiyeol J Kim Kwang Soo KS

ACS omega 20221011 42

Phase pure Na0.4MnO2 microrods crystallized in the orthorhombic symmetry were fabricated for the wet oxidation of H2S and SO2 gases at room temperature. The material was found highly effective for the mineralization of low concentrations of acidic gases. The material was fully regenerable after soaking in a basic H2O2 solution. ...[more]

PMID: 36312367

Similar Datasets

Na0.4MnO2/MXene nanocomposites as cathodes for high-performance aqueous zinc-ion batteries.

Project description:The distinctive configuration of MnO2 renders it an exceptionally promising candidate for cathode materials for aqueous zinc-ion batteries (ZIBs). However, its practical utilization is constrained by the sluggish diffusion kinetics of Zn2+ and the capacity degradation resulting from lattice distortions occurring during charge and discharge cycles. To address these challenges, Na0.4MnO2@MXene with a typical 2 × 4 tunnel structure has been successfully synthesized by a simple hydrothermal method in the presence of 5 M NaCl. The nanorods are about 56 nm in diameter. The zinc-ion batteries (ZIBs) with Na0.4MnO2@MXene displays a specific capacity of 324.6 mA h g-1 at 0.2 A g-1, and have a high reversible capacity of 153.8 mA h g-1 after 1000 charge-discharge cycles at 2 A g-1 with a capacity retention of 91.4%. The unique morphology endows abundant electrochemical active sites and facile ion diffusion kinetics, that contribute to the high specific capacity and stability. The Na0.4MnO2@MXene with a 2 × 4 tunnel structure is a promising candidate as an electrode material for ZIBs.

| S-EPMC11228759 | biostudies-literature

Fabrication of Na and K based MnO2 nanocomposites for supercapacitive applications.

Project description:α-Na0.5Mn0.93O2@Na0.91MnO2 (NaMnO) and K0.48Mn1.94O5@Na0.91MnO2 (KNaMnO) nanocomposites have been synthesized using solid-state reaction method. FESEM results convey the formation of column-shaped morphology. FTIR exhibited a shift in the vibration frequency upon potassium loading. Cyclic voltammetric curves are scanned (0 V-0.8 V) at different scan rates (5 mV/s to 100 mV/s) in 1M KOH electrolyte. Galvanostatic charge-discharge characteristics, for different current densities, have shown non-linear or pseudocapacitive characteristics of the prepared electrodes. High specific capacitance of ∼361 F/g and ∼143 F/g, at a current density of 1A/g, has been achieved for KNaMnO and NaMnO samples, respectively. KNaMnO sample exhibited higher capacitive retention (116 %), up to 2000 cycles, and obeys lower series resistance, charge transfer resistance, and Warburg impedance parameters, thus, convey higher efficiency of this compound for supercapacitor applications.

| S-EPMC11334620 | biostudies-literature

Epitaxial Stabilization and Persistent Nucleation of the 3C Polymorph of Ba0.6Sr0.4MnO3.

Project description:Ba-rich compositions in the BaxSr1-xMnO3 (BSMO) cubic perovskite (3C) system are magnetic ferroelectrics and are of interest for their strong magnetoelectric coupling. Beyond x = 0.5, they only form in hexagonal polymorphs. Here, the 3C phase boundary is pushed to Ba0.6Sr0.4MnO3 for the thin films. Using regular pulsed laser deposition (rPLD), 3C Ba0.6Sr0.4MnO3 could be epitaxially stabilized on DyScO3 (101)o substrates by using a 0.1% O2/99.9% N2 gas mixture. However, the 3C phase was mixed with the 4H polymorph for films 24 nm thick and above, and the films were relatively rough. To improve flatness and phase purity, changes in growth kinetics were investigated and interval PLD (iPLD) was especially effective. In iPLD, deposition is interrupted after completion of approximately one monolayer, and the deposit is annealed for a specific period of time before repeating. Both film flatness and, more importantly, the volume of the 3C polymorph improved with iPLD, resulting in 40 nm single-phase films. The results imply that iPLD improves the persistent nucleation of highly metastable phases and offers a new approach to epitaxial stabilization of novel materials, including more Ba-rich BSMO compositions in the 3C structure.

| S-EPMC10835664 | biostudies-literature

Amplitude mode in the planar triangular antiferromagnet Na0.9MnO2.

Project description:Amplitude modes arising from symmetry breaking in materials are of broad interest in condensed matter physics. These modes reflect an oscillation in the amplitude of a complex order parameter, yet are typically unstable and decay into oscillations of the order parameter's phase. This renders stable amplitude modes rare, and exotic effects in quantum antiferromagnets have historically provided a realm for their detection. Here we report an alternate route to realizing amplitude modes in magnetic materials by demonstrating that an antiferromagnet on a two-dimensional anisotropic triangular lattice (α-Na0.9MnO2) exhibits a long-lived, coherent oscillation of its staggered magnetization field. Our results show that geometric frustration of Heisenberg spins with uniaxial single-ion anisotropy can renormalize the interactions of a dense two-dimensional network of moments into largely decoupled, one-dimensional chains that manifest a longitudinally polarized-bound state. This bound state is driven by the Ising-like anisotropy inherent to the Mn3+ ions of this compound.

| S-EPMC5988795 | biostudies-literature

Study of the correlation between the magnetic and electrical properties of the La0.6Sr0.4MnO3 compound.

Project description:In this work, we investigated the relationship between the electrical and magnetic properties of the superparamagnetic (SPM) La0.6Sr0.4MnO3 (S1C0) compound prepared by the sol-gel method. The (S1C0) sample displayed a ferromagnetic metallic (FMM) behavior at low temperatures and a paramagnetic semiconductor (PMSC) behavior at high temperatures. The FMM behavior was described by the Zener Double Exchange (ZDE) polynomial law containing the contributions of the electron-electron (e-e) interactions and the electron-magnon (e-m) scattering. The PMSC behavior was described by the Mott Variable Range Hopping (Mott-VRH) transport model. The semiconductor/metallic transition temperature has been approximated at the blocking temperature. The Thermal Coefficient of Resistivity (TCR), which exhibits a linear variation around ambient temperature, can be used as a calibration curve for thermometry. Thus, our sample can be considered as a good candidate for the detection of infrared radiation used in night vision bolometer technologies.

| S-EPMC11229085 | biostudies-literature

Humidity sensing using Zn(1.6 - x)Na0.4CuxTiO4 spinel nanostructures.

Project description:In this paper, we present a humidity sensing material based on nanostructured Zn(1.6 - x)Na0.4CuxTiO4 spinel to enhance optical and sensitivity performance. Nano-porous of Zn (1.6 - x) Na0.4CuxTiO4 spinel were synthesized using sol gel reactions and calcined at 700 °C. The nanostructures of Zn(1.6 - x)Na0.4CuxTiO4 spinel underwent thorough characterization through multiple techniques. X-ray diffractometry (XRD) coupled with Rietveld refinement using FullProf software, transmission electron microscopy (TEM), Raman Spectroscopy, and optical analysis were employed to assess various aspects of the nanostructures. These techniques were utilized to determine the phase composition, particle size distribution, chemical bonding, and the tunable band gap of the nanostructures. The X-ray diffraction (XRD) analysis of Zn(1.6 - x)Na0.4CuxTiO4 samples revealed well-defined and prominent peaks, indicating a highly crystalline cubic spinel structure. The lattice parameter was decreased from 8.4401 to 8.4212 Å with increasing Cu content from 0 to 1.2 mol%. UV-visible diffuse reflectance spectra were employed to investigate the optical characteristics of copper-doped Zn1.6Na0.4TiO4. The applicability of Cu@NaZT spinel nanostructures in humidity sensors was evaluated at ambient conditions. The fabricated sensor was investigated in a wide span of humidity (11-97%). The examined sensor demonstrates a low hysteresis, excellent repeatability, fast response and recovery. The response and recovery times were estimated to be 20 s and 6 s respectively. The highest sensitivity was achieved at 200 Hz. The proposed sensor can be coupled easily with electronic devices as the humidity-impedance relationship is linear.

| S-EPMC10766635 | biostudies-literature

Strain-Induced Domain Structure and Its Impact on Magnetic and Transport Properties of Gd0.6Ca0.4MnO3 Thin Films.

Project description:The evolution of lattice strain on crystallographic domain structures and magnetic properties of epitaxial low-bandwidth manganite Gd0.6Ca0.4MnO3 (GCMO) films have been studied with films on different substrates: SrTiO3, (LaAlO3)0.3(Sr2AlTaO6)0.7, SrLaAlO3, and MgO. The X-ray diffraction data reveals that all of the films, except the films on MgO, are epitaxial and have an orthorhombic structure. Cross-sectional transmission electron microscopy (TEM) shows lattice mismatch-dependent microstructural defects. Large-enough tensile strain can increase oxygen vacancies concentration near the interface and can induce vacancies in the substrate. In addition, a second phase was observed in the films with tensile strain. However, compressive strain causes dislocations in the interface and a mosaic domain structure. On the other hand, the magnetic properties of the films, including saturation magnetization, coercive field, and transport property depend systematically on the substrate-induced strain. Based on these results, the choice of appropriate substrate is an important key to obtaining high-quality GCMO film, which can affect the functionality of potential device applications.

| S-EPMC8697384 | biostudies-literature

MAPbI3 Microrods-Based Photo Resistor Switches: Fabrication and Electrical Characterization.

Project description:The current work proposed the application of methylammonium lead iodide (MAPbI3) perovskite microrods toward photo resistor switches. A metal-semiconductor-metal (MSM) configuration with a structure of silver-MAPbI3(rods)-silver (Ag/MAPbI3/Ag) based photo-resistor was fabricated. The MAPbI3 microrods were prepared by adopting a facile low-temperature solution process, and then an independent MAPbI3 microrod was employed to the two-terminal device. The morphological and elemental compositional studies of the fabricated MAPbI3 microrods were performed using FESEM and EDS, respectively. The voltage-dependent electrical behavior and electronic conduction mechanisms of the fabricated photo-resistors were studied using current-voltage (I-V) characteristics. Different conduction mechanisms were observed at different voltage ranges in dark and under illumination. In dark conditions, the conduction behavior was dominated by typical trap-controlled charge transport mechanisms within the investigated voltage range. However, under illumination, the carrier transport is dominated by the current photogenerated mechanism. This study could extend the promising application of perovskite microrods in photo-induced resistor switches and beyond.

| S-EPMC8398296 | biostudies-literature

Photocatalytic oxidation of aromatic amines using MnO2@g-C3N4.

Project description:An efficient and direct oxidation of aromatic amines to aromatic azo-compounds has been achieved using a MnO2@g- C3N4 catalyst under visible light as a source of energy at room temperature.

| S-EPMC6134849 | biostudies-literature

Room-Temperature Flexible Quasi-Solid-State Rechargeable Na-O2 Batteries.

Project description:Rechargeable Na-O2 batteries have been regarded as promising energy storage devices because of their high energy density, ultralow overpotential, and abundant resources. Unfortunately, conventional Na-O2 batteries with a liquid electrolyte often suffer from severe dendrite growth, electrolyte leakage, and potential H2O contamination toward the Na metal anode. Here, we report a quasi-solid-state polymer electrolyte (QPE) composed of poly(vinylidene fluoride-co-hexafluoropropylene)-4% SiO2-NaClO4-tetraethylene glycol dimethyl ether for rechargeable Na-O2 batteries with high performance. Density functional theory calculations reveal that the fluorocarbon chains of QPE are beneficial for Na+ transfer, resulting in a high ionic conductivity of 1.0 mS cm-1. Finite element method simulations show that the unique nanopore structure and high dielectric constant of QPE can induce a uniform distribution of the electric field during charge/discharge processes, thus achieving a homogeneous deposition of Na without dendrites. Moreover, the nonthrough nanopore structure and hydrophobic behavior resulting from fluorocarbon chains of QPE could effectively protect Na anode from H2O erosion. Therefore, the fabricated quasi-solid-state Na-O2 batteries exhibit an average Coulombic efficiency of up to 97% and negligible voltage decay during 80 cycles at a discharge capacity of 1000 mAh g-1. As a proof of concept, flexible pouch-type Na-O2 batteries were assembled, displaying stable electrochemical performance for ∼400 h after being bent from 0 to 360°. This work demonstrates the application of the quasi-solid-state electrolyte for high-performance flexible Na-O2 batteries.

| S-EPMC7706082 | biostudies-literature