Construction of a High Nuclear Gadolinium Cluster with Enhanced Magnetocaloric Effect through Structural Transition
Ontology highlight
ABSTRACT:
SUBMITTER: Hu P
PROVIDER: S-EPMC9631744 | biostudies-literature | 2022 Oct
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:The series of advanced nanocomposites consisting of Gd2O3 nanoparticles (NPs) embedded into periodic porous SiO2 matrix have been investigated with respect to their structural and magnetocaloric properties. By means of small angle neutron scattering and transmission electron microscopy, regular nanopores organized in the cubic or hexagonal superlattice have been documented. The pores are occupied by the NPs of progressive concentration within the nanocomposite series. All of the examined systems have exhibited extraordinarily high values of magnetic entropy change (up to 70 J kg-1 K-1) at low temperatures with the absence of thermal hysteresis, indicating their perspective utilization in cryogenic refrigeration. Profound analysis of magnetic entropy change data via scaling laws has been applied to the nanocomposite materials for the very first time. With the aid of scaling analysis, conclusions on magnetic properties and phase transition type have been made, even for the conditions unavailable in the laboratory.
| S-EPMC8831503 | biostudies-literature
Project description:Magnetic properties of three variants of MOF-76(Gd), {[Gd(BTC)(H2O)]·G}n (BTC = benzene-1,3,5-tricarboxylate, G = guest molecules) were investigated by static susceptibility, isothermal magnetization and specific heat capacity measurements. In the study we used as synthesized MOF-76(Gd)-DMF (1) (G = DMF = dimethylformamide), containing DMF molecules in the cavity system, compound MOF-76(Gd) (2), activated complex without solvents in the cavities and water exchanged sample MOF-76(Gd)-H2O (3). A pronounced change in the magnetic entropy was found near the critical temperature for all three compounds. It was shown, that magnetic entropy change depends on the solvatation of the MOF. The highest value entropy change, ΔSMpk(T) was observed for compound 2 (ΔSMpk(T) = 42 J kg-1 K-1 at 1.8 K for ΔH = 5 T). The ΔSMpk(T) for the compounds 1, 2 and 3 reached 81.8, 88.4 and 100% of the theoretical values, respectively. This suggests that in compound 3 Gd3+···Gd3+ antiferromagnetic interactions are decoupled gradually, and higher fields promote a larger decoupling between the individual spin centers. The observed entropy changes of compounds were comparable with other magnetic refrigerants proposed for low-temperature applications. To study the magnetothermal effect of 2 (the sample with largest -ΔSMpk), the temperature-dependent heat capacities (C) at different fields were measured. The value of magnetic entropy S obtained from heat capacities (39.5 J kg-1 K-1 at 1.8 K for an applied magnetic field change of 5 T) was in good agreement with that derived from the magnetization data (42 J kg-1 K-1 at 1.8 K).
| S-EPMC6821888 | biostudies-literature
Project description:The unpredictability of geopolitical tensions and resulting supply chain and pricing instabilities make it imperative to explore rare earth free magnetic materials. As such, we have investigated fully transition metal based "high entropy alloys" in the context of the magnetocaloric effect. We find the NiFeCoCrPdx family exhibits a second order magnetic phase transition whose critical temperature is tunable from 100 K to well above room temperature. The system notably displays changes in the functionality of the magnetic entropy change depending on x, which leads to nearly 40% enhancement of the refrigerant capacity. A detailed statistical analysis of the universal scaling behavior provides direct evidence that heat treatment and Pd additions reduce the distribution of exchange energies in the system, leading to a more magnetically homogeneous alloy. The general implications of this work are that the parent NiFeCoCr compound can be tuned dramatically with FCC metal additives. Together with their relatively lower cost, their superior mechanical properties that aid manufacturability and their relative chemical inertness that aids product longevity, NiFeCoCr-based materials could ultimately lead to commercially viable magnetic refrigerants.
| S-EPMC4623812 | biostudies-other
Project description:In this work, a systematic study of Cu(NO3)2·2.5 H2O (copper nitrate hemipentahydrate, CN), an alternating Heisenberg antiferromagnetic chain model material, is performed with multi-technique approach including thermal tensor network (TTN) simulations, first-principles calculations, as well as magnetization measurements. Employing a cutting-edge TTN method developed in the present work, we verify the couplings J = 5.13 K, α = 0.23(1) and Landé factors g∥= 2.31, g⊥ = 2.14 in CN, with which the magnetothermal properties have been fitted strikingly well. Based on first-principles calculations, we reveal explicitly the spin chain scenario in CN by displaying the calculated electron density distributions, from which the distinct superexchange paths are visualized. On top of that, we investigated the magnetocaloric effect (MCE) in CN by calculating its isentropes and magnetic Grüneisen parameter. Prominent quantum criticality-enhanced MCE was uncovered near both critical fields of intermediate strengths as 2.87 and 4.08 T, respectively. We propose that CN is potentially a very promising quantum critical coolant.
| S-EPMC5353727 | biostudies-literature
Project description:In the present work, two successive magneto-structural transformations (MSTs) consisting of martensitic and intermartensitic transitions have been observed in polycrystalline Ni55.8Mn18.1Ga26.1 Heusler alloy. Benefiting from the additional latent heat contributed from intermediate phase, this alloy exhibits a large transition entropy change ΔStr with the value of ~27 J/kg K. Moreover, the magnetocaloric effect (MCE) has been also evaluated in terms of Maxwell relation. For a magnetic field change of 30 kOe, it was found that the calculated value of refrigeration capacity in Ni55.8Mn18.1Ga26.1 attains to ~72 J/kg around room temperature, which significantly surpasses those obtained for many Ni-Mn based Heusler alloys in the same condition. Such an enhanced MCE can be ascribed to the fact that the isothermal entropy change ΔST is spread over a relatively wide temperature interval owing to existence of two successive MSTs for studied sample.
| S-EPMC4598732 | biostudies-other
Project description:The development of advanced materials and technologies based on magnetocaloric Gd and its compounds requires an understanding of the dependency of mechanical properties on their underlying microstructure. Therefore, the aim of the study was to characterize microstructural inhomogeneities in the gadolinium that can be used in magnetocaloric refrigeration systems. Microstructures of magnetocaloric gadolinium cylinders were investigated by light microscopy and FE-SEM (Field Emission Scanning Electron Microscopy), EDS (Energy-dispersive X-ray Spectroscopy), and BSE (Back-scattered Electrons) in both the extrusion and the extrusion-transversal directions. XRD (X-ray Diffraction) analyses were performed to reveal the presence of calcium- and fluorine-based compounds. Metallographic characterization showed an oxidized and inhomogeneous microstructure of the cross-sections. The edges and the outer parts of the cylinders were oxidized more intensively on the surfaces directly exposed to the processing tools. Moreover, a significant morphological anisotropy of the non-metallic inclusions was observed. CaF inclusions act as active nucleation sites for internal oxidation. The non-metallic, Ca- and F-containing inclusions can be classified as complex calciumoxyfluorides. The solubility of Er and Yb in the CaF was negligible compared to the Gd matrix and/or the oxide phase. Lower mechanical properties of the material are a consequence of the lower structural integrity due to selective oxidation of surfaces and interfaces.
| S-EPMC5503061 | biostudies-other
Project description:Magnetocaloric effect is the phenomenon that temperature change of a magnetic material is induced by application of a magnetic field. This effect can be applied to environmentally-benign magnetic refrigeration technology. Here we show a key role of magnetic-field-induced structural instability in enhancing the magnetocaloric effect for MnCo(1-x)Zn(x)Ge alloys (x = 0-0.05). The increase in x rapidly reduces the martensitic transition temperature while keeping the ferromagnetic transition around room temperature. Fine tuning of x around x = 0.03 leads to the concomitant structural and ferromagnetic transition in a cooling process, giving rise to enhanced magnetocaloric effect as well as magnetic-field-induced structural transition. Analyses of the structural phase diagrams in the T-H plane in terms of Landau free-energy phenomenology accounts for the characteristic x-dependence of the observed magnetocaloric effect, pointing to the importance of the magnetostructural coupling for the design of high-performance magnetocalorics.
| S-EPMC4269893 | biostudies-other
Project description:High magnetocaloric refrigeration performance requires large magnetic entropy change ΔS M and broad working temperature span ΔT FWHM . A fourth element doping of Co in ternary Ni-Mn-Sn alloy may significantly enhance the saturation magnetization of the alloy and thus enhance the ΔS M . Here, the effects of Co-doping on the martensite transformation, magnetic properties and magnetocaloric effects (MCE) of quaternary Ni47-xMn43Sn10Cox (x = 0, 6, 11) alloys were investigated. The martensite transformation temperatures decrease while austenite Curie point increases with Co content increasing to x = 6 and 11, thus broadening the temperature window for a high magnetization austenite (13.5, 91.7 and 109.1 A·m2/kg for x = 0, 6 and 11, respectively). Two successive magnetostructural transformations (A → 10 M and A → 10 M + 6 M) occur in the alloy x = 6, which are responsible for the giant magnetic entropy change ΔS M = 29.5 J/kg·K, wide working temperature span ΔT FWHM = 14 K and large effective refrigeration capacity RC eff = 232 J/kg under a magnetic field of 5.0 T. These results suggest that Ni40.6Mn43.3Sn10.0Co6.1 alloy may act as a potential solid-state magnetic refrigerant working at room temperature.
| S-EPMC5974186 | biostudies-literature
Project description:First-order magnetic transitions (FOMTs) with a large discontinuity in magnetization are highly sought in the development of advanced functional magnetic materials. Isosymmetric magnetoelastic FOMTs that do not perturb crystal symmetry are especially rare, and only a handful of material families, almost exclusively transition metal-based, are known to exhibit them. Yet, here we report a surprising isosymmetric FOMT in a rare-earth intermetallic, Eu2In. What makes this transition in Eu2In even more remarkable is that it is associated with a large latent heat and an exceptionally high magnetocaloric effect in low magnetic fields, but with tiny lattice discontinuities and negligible hysteresis. An active role of the Eu-5d and In-4p states and a rather unique electronic structure borne by In to Eu charge transfer, altogether result in an unusual exchange mechanism that both sets the transition in motion and unveils an approach toward developing specific magnetic functionalities ad libitum.
| S-EPMC6062548 | biostudies-literature
Project description:We report a complete structural and magneto-thermodynamic characterization of four samples of the Heusler alloy Ni-Co-Mn-Ga-In, characterized by similar compositions, critical temperatures and high inverse magnetocaloric effect across their metamagnetic transformation, but different transition widths. The object of this study is precisely the sharpness of the martensitic transformation, which plays a key role in the effective use of materials and which has its origin in both intrinsic and extrinsic effects. The influence of the transition width on the magnetocaloric properties has been evaluated by exploiting a phenomenological model of the transformation built through geometrical considerations on the entropy versus temperature curves. A clear result is that a large temperature span of the transformation is unfavourable to the magnetocaloric performance of a material, reducing both isothermal entropy change and adiabatic temperature change obtainable in a given magnetic field and increasing the value of the maximum field needed to fully induce the transformation. The model, which is based on standard magnetometric and conventional calorimetric measurements, turns out to be a convenient tool for the determination of the optimum values of transformation temperature span in a trade-off between sheer performance and amplitude of the operating range of a material.This article is part of the themed issue 'Taking the temperature of phase transitions in cool materials'.
| S-EPMC4938065 | biostudies-other