Cavitation in a soft porous material.
Ontology highlight
ABSTRACT:
SUBMITTER: Leng Y
PROVIDER: S-EPMC9802157 | biostudies-literature | 2022 Sep
REPOSITORIES: biostudies-literature
Publications
Cavitation in a soft porous material.
Leng Yu Y Vlachos Pavlos P PP Juanes Ruben R Gomez Hector H
PNAS nexus 20220818 4
We study the collapse and expansion of a cavitation bubble in a deformable porous medium. We develop a continuum-scale model that couples compressible fluid flow in the pore network with the elastic response of a solid skeleton. Under the assumption of spherical symmetry, our model can be reduced to an ordinary differential equation that extends the Rayleigh-Plesset equation to bubbles in soft porous media. The extended Rayleigh-Plesset equation reveals that finite-size effects lead to the break ...[more]
Similar Datasets
Project description:Novel porous magnetic soft materials (pMSMs) based on a poly (vinyl alcohol) (PVA) porous matrix filled with CuNi nanoparticles (NPs) of around 70 nm were synthesized. Initially, magnetic CuNi NPs were fabricated by the reduction of Ni and Cu ions with hydrazine hydrate in ethylene glycol medium in the absence of other capping agents. The pMSMs are subsequently fabricated by mixing CuNi NPs and PVA through freezing-drying process. The as-obtained pMSMs can respond to a magnetic field, i.e., the compressive modulus increase under a magnetic field of 0.23 T. The experimental results indicate that CuNi NPs can easily move to form chain-like structures under the application of a magnetic field. A combination of direct observation and finite element modeling has shown that under the influence of a magnetic field, chain-like aggregates of CuNi NPs lead to self-reinforcement of the pMSMs and, thus, to the increased compressive modulus. From a technological point of view, these materials with good magnetic responsiveness and moderate mechanical strength have potential applications in artificial muscle, soft actuators and drug release, to name a few.
| S-EPMC8877354 | biostudies-literature
Project description:Inspired by natural muscle, a key challenge in soft robotics is to develop self-contained electrically driven soft actuators with high strain density. Various characteristics of existing technologies, such as the high voltages required to trigger electroactive polymers ( > 1KV), low strain ( < 10%) of shape memory alloys and the need for external compressors and pressure-regulating components for hydraulic or pneumatic fluidicelastomer actuators, limit their practicality for untethered applications. Here we show a single self-contained soft robust composite material that combines the elastic properties of a polymeric matrix and the extreme volume change accompanying liquid-vapor transition. The material combines a high strain (up to 900%) and correspondingly high stress (up to 1.3 MPa) with low density (0.84 g cm-3). Along with its extremely low cost (about 3 cent per gram), simplicity of fabrication and environment-friendliness, these properties could enable new kinds of electrically driven entirely soft robots.The development of self-contained electrically driven soft actuators with high strain density is difficult. Here the authors show a single self-contained soft robust composite material that combines the elastic properties of a polymeric matrix and the extreme volume change accompanying liquid vapour transition.
| S-EPMC5605691 | biostudies-literature
Project description:We have studied the molecular level cavitation mechanisms and bubble growth kinetics in soft gelatin hydrogel and water. The apparent difference in cavitation threshold pressure between that generates in pure water and that in gelatin hydrogel is considered. Gelatin, which is derived from collagen, is frequently used as a brain simulant material. In liquid, cavitation bubble is created when surrounding pressure drops below the saturation vapor pressure. In principle, a cavitation bubble should continue to grow as long as tensile pressure continues to increase in the system. In our study, using molecular dynamics simulation, we have investigated the pressure requirement for a nanoscale cavitation to grow in water and gel. First, we have modeled a gel like structure with a preexisting bubble of 5 nm radius. A control model containing a 5 nm bubble in pure water is also created. Then, we have applied hydrostatic tensile pressure at two different expansion rates in the gel and water models. The results show that a gel-like structure requires higher pressure for the cavitation to grow, and both gel and water models exhibit strain rate effect on the cavitation threshold pressure. We have also found that the cavitation collapse time is dominated by the viscosity of the medium.
| S-EPMC7295970 | biostudies-literature
Project description:The transient, dynamic response of soft materials to mechanical impact has become increasingly relevant due to the emergence of numerous biomedical applications, e.g., accurate assessment of blunt injuries to the human body. Despite these important implications, acceleration-induced pressure gradients in soft materials during impact and the corresponding material response, from small deformations to sudden bubble bursts, are not fully understood. Both through experiments and theoretical analyses, we empirically show, using collagen and agarose model systems, that the local pressure in a soft sample is proportional to the square of the sample depth in the impact direction. The critical acceleration that corresponds to bubble bursts increases with increasing gel stiffness. Bubble bursts are also highly sensitive to the initial bubble size, e.g., bubble bursts can occur only when the initial bubble diameter is smaller than a critical size (≈10 μm). Our study gives fundamental insight into the physics of injury mechanisms, from blunt trauma to cavitation-induced brain injury.
| S-EPMC6203720 | biostudies-literature
Project description:Hydrodynamic cavitation (HC), which can effectively induce sonochemical effects, is widely considered a promising process intensification technology. In the present study, HC was successfully utilized to intensify the alkali activation of GPs for SCs, for the first time. Five BDCMs were synthesized following the method reported in the literature. For comparison, four more BDCMs with HC-treated, among which a sample was further doped with nitrogen during the HC treatment, were prepared. Then all the samples were compared from microscopical characteristics to electrochemical performance as SCs materials. The morphology study demonstrated that the HC treatment had created many defects and amorphous carbon structures on the GP-based BDCMs, with the highest SSA reaching 3272 m2/g (1:6-HCGP), which 32 folded that of the Raw carbon sample's. The HC treatment also intensified the N-doping process. XRD and XPS results manifested that the N content had been increased and consequently changed the electronic structure of the carbon atoms, leading to the increase of specific capacitance (1:6-HCGP+N-based SC, 227 F/g at 10 A/g). The cycle performance proved that the GP-based BDCMs have long-term stability, indicating that the HC-treated BDCMs were good choices for energy storage technologies. Compared with the ultrasound-assisted method, which may have a high energy density, the HC-assisted method enables high production and energy efficiency. This work is a first time attempt towards the industrial application of HC method in energy-related materials synthesis and encourages more in-depth studies in the future.
| S-EPMC9975689 | biostudies-literature
Project description:We report the design and characterization of liquid crystal (LC)-infused porous polymer membranes that can detect and report on the presence of natural and synthetic amphiphiles in aqueous solution. We demonstrate that thermotropic LCs can be infused into nanoporous polymer membranes to yield LC-infused surfaces that exhibit slippery behaviors in contact with a range of aqueous fluids. In contrast to conventional liquid-infused surfaces (LIS) or slippery liquid-infused porous surfaces (SLIPS) prepared using isotropic oils, aqueous solutions slide over the surfaces of these LC-infused materials at speeds that depend strongly upon the composition of the fluid, including the presence, concentration, or structure of a dissolved surfactant. In general, the sliding times of aqueous droplets on these LC-infused surfaces increase significantly (e.g., from times on the order of seconds to times on the order of minutes) with increasing amphiphile concentration, allowing sliding times to be used to estimate the concentration of the amphiphile. Additional experiments revealed other intrinsic and extrinsic variables or parameters that can be used to further manipulate droplet sliding times and discriminate among amphiphiles of similar structure. Our results are consistent with a physical picture that involves reversible changes in the interfacial orientation of anisotropic LCs mediated by the interfacial adsorption of amphiphiles. These materials thus permit facile "naked-eye" detection and discrimination of amphiphiles in aqueous samples using equipment no more sophisticated than a stopwatch. We demonstrate the potential utility of these LC-infused surfaces for the unaided, naked-eye detection and monitoring of amphiphilic biotoxins in small droplets of fluid extracted directly from cultures of two common bacterial pathogens (Pseudomonas aeruginosa and Staphylococcus aureus). The ability to translate molecular interactions at aqueous/LC interfaces into large and readily observed changes in the sliding times of small aqueous droplets on surfaces could open the door to new applications for antifouling, liquid-infused materials in the context of environmental sensing and other fundamental and applied areas.
| S-EPMC8459213 | biostudies-literature
Project description:Soft robots are envisioned as the next generation of safe biomedical devices in minimally invasive procedures. Yet, the difficulty of processing soft materials currently limits the size, aspect-ratio, manufacturing throughput, as well as, the design complexity and hence capabilities of soft robots. Multi-material thermal drawing is introduced as a material and processing platform to create soft robotic fibers imparted with multiple actuations and sensing modalities. Several thermoplastic and elastomeric material options for the fibers are presented, which all exhibit the rheological processing attributes for thermal drawing but varying mechanical properties, resulting in adaptable actuation performance. Moreover, numerous different fiber designs with intricate internal architectures, outer diameters of 700 µm, aspect ratios of 103 , and a fabrication at a scale of 10s of meters of length are demonstrated. A modular tendon-driven mechanism enables 3-dimensional (3D) motion, and embedded optical guides, electrical wires, and microfluidic channels give rise to multifunctionality. The fibers can perceive and autonomously adapt to their environments, as well as, probe electrical properties, and deliver fluids and mechanical tools to spatially distributed targets.
| S-EPMC9839840 | biostudies-literature
Project description:The nontemplating preparation of porous carbon materials by using specially designed polymer precursors for supercapacitor is attracting considerable research attention because of the more controllable frame structure and easier processes than templating methods. Herein, a deliberately designed cross-linking polyphosphamide resin with defined N and P structure is synthesized and then carbonized to obtain porous carbon material. The as-obtained porous carbon material has a specific surface area of 2,620 m2 g-1, high porosity of 1.49 cm3 g-1, and well-distributed micro/mesoporous carbon structure. Different from activation by post-added NH4H2PO4, the confined N and P in the polymer frame are confirmed to play an important role in pore structure development by forming in situ highly dispersed NH4H2PO4 during carbonization. When evaluated as the electrode material for supercapacitors, the polyphosphamide-resin-based porous carbon material demonstrates excellent capacitance (440 F g-1 under 0.5 A g-1) and high stability (retention of 93% over 10,000 cycles).
| S-EPMC6354840 | biostudies-literature
Project description:Ultrasound is widely applied in medical diagnosis and therapy due to its safety, high penetration depth, and low cost. In order to improve the contrast of sonographs and efficiency of the ultrasound therapy, echogenic gas bodies or droplets (with diameters from 200 nm to 10 µm) are often used, which are not very stable in the bloodstream and unable to penetrate into target tissues. Recently, it was demonstrated that nanobubbles stabilized by nanoparticles can nucleate ultrasound responsive microbubbles under reduced acoustic pressures, which is very promising for the development of nanoscale (<100 nm) ultrasound agents. However, there is still very little understanding about the effects of nanoparticle properties on the stabilization of nanobubbles and nucleation of acoustic cavitation by these nanobubbles. Here, a series of mesoporous silica nanoparticles with sizes around 100 nm but with different morphologies were synthesized to understand the effects of nanoparticle porosity, surface roughness, hydrophobicity, and hydrophilic surface modification on acoustic cavitation inception by porous nanoparticles. The chemical analyses of the nanoparticles showed that, while the nanoparticles were prepared using the same silica precursor (TEOS) and surfactant (CTAB), they revealed varying amounts of carbon impurities, hydroxyl content, and degrees of silica crosslinking. Carbon impurities or hydrophobic modification with methyl groups is found to be essential for nanobubble stabilization by mesoporous silica nanoparticles. The acoustic cavitation experiments in the presence of ethanol and/or bovine serum albumin (BSA) demonstrated that acoustic cavitation is predominantly nucleated by the nanobubbles stabilized at the nanoparticle surface not inside the mesopores. Finally, acoustic cavitation experiments with rough and smooth nanoparticles were suggested that a rough nanoparticle surface is needed to largely preserve surface nanobubbles after coating the surface with hydrophilic macromolecules, which is required for in vivo applications of nanoparticles.
| S-EPMC5419691 | biostudies-literature
Project description:Graphene oxide (GO) sheets have been used as a model system to study how the mechanical properties of two-dimensional building blocks scale to their bulk form, such as paper-like, lamellar-structured thin films. Here, we report that the modulus of multilayer GO films can be significantly enhanced if some of the sheets are drastically weakened by introducing in-plane porosity. Nanometer-sized pores are introduced in GO sheets by chemical etching. Membrane-deflection measurements at the single-layer level show that the sheets are drastically weakened as the in-plane porosity increases. However, the mechanical properties of the corresponding multilayer films are much less sensitive to porosity. Surprisingly, the co-assembly of pristine and etched GO sheets yields even stiffer films than those made from pristine sheets alone. This is attributed to the more compliant nature of the soft porous sheets, which act as a binder to improve interlayer packing and load transfer in the multilayer films.
| S-EPMC6695419 | biostudies-literature