Inhibition by heparin-modulated antithrombin III of amidolysis catalysed by m beta-acrosin.
Ontology highlight
ABSTRACT:
SUBMITTER: Long WF
PROVIDER: S-EPMC1153274 | biostudies-other | 1984 Feb
REPOSITORIES: biostudies-other
Similar Datasets
Project description:The effect of various well-characterized heparin preparations on the inactivation of human Factor XIa by human antithrombin III was studied. The heparin preparations used were unfractionated heparin and four heparin fractions obtained after anion-exchange chromatography. Inactivation of Factor XIa was monitored with S2366 as chromogenic substrate and followed pseudo-first-order reaction kinetics under all reaction conditions tested. Enhancement of the rate of inhibition of Factor XIa in the presence of unfractionated heparin correlated to the binding of antithrombin III to heparin. From the kinetic data a binding constant of 0.1 microM was inferred. The maximum rate enhancement, achieved at saturating heparin concentrations, was 30-fold. The rate enhancement achieved in the presence of each of the heparin fractions could also be correlated to the binding of antithrombin III to the heparin. The binding constant inferred from the kinetic data varied from 0.10 to 0.28 microM and the number of binding sites for antithrombin III varied from 0.06 to 0.74 site per heparin molecule. The maximum rate enhancements, achieved at saturating heparin concentrations, were strongly dependent on the type of heparin used and varied from 7-fold for fraction A to 41-fold for fraction D. Therefore, although the stimulation of Factor XIa inactivation by antithrombin III could be quantitatively correlated to the binding of antithrombin III to heparin, the heparin-catalysed inhibition of Factor XIa is dependent not only upon the degree of binding of antithrombin III to heparin but also upon the type of heparin to which antithrombin III is bound.
| S-EPMC1135488 | biostudies-other
Project description:The present study deals with the conformation in solution of two heparin octasaccharides containing the pentasaccharide sequence GlcN(NAc,6S)-GlcA-GlcN(NS,3,6S)-IdoA(2S)-GlcN(NS,6S) [AGA*IA; where GlcN(NAc,6S) is N-acetylated, 6-O-sulfated alpha-D-glucosamine, GlcN(NS,3,6S) is N,3,6-O-trisulfated alpha-D-glucosamine and IdoA(2S) is 2-O-sulfated IdoA (alpha-L-iduronic acid)] located at different positions in the heparin chain and focuses on establishing geometries of IdoA residues (IdoA(2S) and IdoA) both inside and outside the AGA*IA sequence. AGA*IA constitutes the active site for AT (antithrombin) and is essential for the expression of high anticoagulant and antithrombotic activities. Analysis of NMR parameters [NOEs (nuclear Overhauser effects), transferred NOEs and coupling constants] for the two octasaccharides indicated that between the 1C4 and 2S0 conformations present in dynamic equilibrium in the free state for the IdoA(2S) residue within AGA*IA, AT selects the 2S0 form, as previously shown [Hricovini, Guerrini, Bisio, Torri, Petitou and Casu (2001) Biochem. J. 359, 265-272]. Notably, the 2S0 conformation is also adopted by the non-sulfated IdoA residue preceding AGA*IA that, in the absence of AT, adopts predominantly the 1C4 form. These results further support the concept that heparin-binding proteins influence the conformational equilibrium of iduronic acid residues that are directly or indirectly involved in binding and select one of their equi-energetic conformations for best fitting in the complex. The complete reversal of an iduronic acid conformation preferred in the free state is also demonstrated for the first time. Preliminary docking studies provided information on the octasaccharide binding location agreeing most closely with the experimental data. These results suggest a possible biological role for the non-sulfated IdoA residue preceding AGA*IA, previously thought not to influence the AT-binding properties of the pentasaccharide. Thus, for each AT binding sequence longer than AGA*IA, the interactions with the protein could differ and give to each heparin fragment a specific biological response.
| S-EPMC1609903 | biostudies-literature
Project description:The interaction, in aqueous solution, of the synthetic pentasaccharide AGA*IA(M) (GlcN,6-SO(3)alpha 1-4GlcA beta 1-4GlcN,3,6-SO(3)alpha 1-4IdoA,2-SO(3)alpha 1-4GlcN,6-SO(3)alpha OMe; where GlcN,6-SO(3) is 2-deoxy-2-sulphamino-alpha-D-glucopyranosyl 6-sulphate, IdoA is l-iduronic acid and IdoA2-SO(3) is L-iduronic acid 2-sulphate), which exactly reproduces the structure of the specific binding sequence of heparin and heparan sulphate for antithrombin III, has been studied by NMR. In the presence of antithrombin there were marked changes in the chemical shifts and nuclear Overhauser effects (NOEs), compared with the free state. On the basis of the optimized geometry of the pentasaccharide the transferred NOEs were interpreted with full relaxation and conformational exchange matrix analysis. An analysis of the three-dimensional structures of the pentasaccharide in the free state, and in the complex, revealed the binding to be accompanied by dihedral angle variation at the A-G and I-A(M) (where G, I, A and A(M) are beta-d-glucuronic acid, 2-O-sulphated alpha-L-iduronic acid, N,6-O-sulphated alpha-D-glucosamine and the alpha-methyl-glycoside of A respectively) glycosidic linkages. Evidence is also provided that the protein drives the conformation of the 2-O-sulphated iduronic acid residue towards the skewed (2)S(0) form.
| S-EPMC1222144 | biostudies-other
Project description:Heparin-binding proteins may contain specific patterns of basic amino acids, called consensus sequences, that interact with heparin. Small peptides were synthesized that contained consensus sequences (i.e. FAKLNCRLYRKANKSSK) or disrupted consensus sequences (i.e. K136-->A) based on the known sequence of antithrombin III (amino acid residues 123-139). These peptides were then examined in both competitive and non-competitive binding experiments using bioassays, fluorescence spectroscopy, affinity chromatography and n.m.r. spectroscopy. Both the consensus and disrupted-consensus peptide bound to heparin. Peptides with consensus sequences bound specifically to the pentasaccharide antithrombin III-binding site within heparin. In contrast, peptides with disrupted consensus sequences showed no specificity, binding to any sequence within heparin. Proton nuclear Overhauser enhancement spectroscopy demonstrated the proximity of leucine and tyrosine (within the consensus sequence) to the N-acetyl moiety found primarily within the pentasaccharide antithrombin III-binding site of heparin. This experiment confirmed the findings of the other techniques and helped to localize the binding sites in both peptides and heparin. A model is proposed for both specific and non-specific heparin interaction with consensus and disrupted-consensus peptides.
| S-EPMC1137151 | biostudies-other
Project description:The inactivation of thrombin by heat and by its physiological inhibitor, antithrombin-III, shows quite different dependence on heparin concentration. Heparin at 250 microgram/ml protects thrombin against heat inactivation, and thrombin behaves heterogeneously in this reaction. In the absence of heparin, the thermodynamic activation parameters change with temperature (deltaH+ = 733 kJ/mol and 210 kJ/mol at 50 and 58 degrees C respectively). When heparin is present, heat inactivation of the protected thrombin species proceeds with deltaH+ = 88 kJ/mol and is independent of temperature in the same range. On the other hand, heparin at 0.125-2.5 microgram/ml accelerates the thrombin-antithrombin-III reaction. Thrombin does not show heterogeneity in this reaction and the time courses at any heparin concentration and any temperature between 0 and 37 degrees C appear to follow first-order kinetics. Activation enthalpy is independent of heparin concentration or temperature, deltaH+ = 82-101 kJ/mol, varying slightly with antithrombin-III concentration and thrombin specific activity. Heparin seems to exert its effect by increasing activation entropy. On the basis of these data we suggest a mechanism of action of heparin in the thrombin-antithrombin-III reaction which accounts for all the important features of the latter and seems to unify the different hypotheses that have been advanced.
| S-EPMC1185853 | biostudies-other
Project description:Blood clotting proceeds through the sequential proteolytic activation of a series of serine proteases, culminating in thrombin cleaving fibrinogen into fibrin. The serine protease inhibitors (serpins) antithrombin (AT) and protein C inhibitor (PCI) both inhibit thrombin in a heparin-accelerated reaction. Heparin binds to the positively charged D-helix of AT and H-helix of PCI. The H-helix of AT is negatively charged, and it was mutated to contain neutral or positively charged residues to see if they contributed to heparin stimulation or protease specificity in AT. To assess the impact of the H-helix mutations on heparin stimulation in the absence of the known heparin-binding site, negative charges were also introduced in the D-helix of AT. AT with both positively charged H- and D-helices showed decreases in heparin stimulation of thrombin and factor Xa inhibition by 10- and 5-fold respectively, a decrease in affinity for heparin sepharose, and a shift in the heparin template curve. In the absence of a positively charged D-helix, changing the H-helix from neutral to positively charged increased heparin stimulation of thrombin inhibition 21-fold, increased heparin affinity and restored a normal maximal heparin concentration for inhibition.
| S-EPMC2215310 | biostudies-literature
Project description:Inactivation of plasmin by a 3-4-fold molar excess of antithrombin III follows pseudo-first-order kinetics and the apparent rate constants are proportional to the concentration of the inhibitor. Heparin accelerates the inactivation reaction without changing its pseudo-first-order character, and the apparent rate constants are also proportional to the concentration of the polysaccharide. Heparin results in a minimum 20-fold rate enhancement of the reaction between plasmin and antithrombin III when the concentrations of heparin and plasmin are approx. 0.5mum and 1mum respectively. Heparin at a molar concentration well below that of plasmin still accelerates the reaction: one molecule of the polysaccharide is able to facilitate the inactivation of about 100 molecules of plasmin. Heparin must bind to plasmin to accelerate the plasmin-antithrombin III reaction, since the modification of four to five lysine residues of the enzyme inhibits the rate-enhancement effect of heparin and the dissociation of heparin-plasmin complex decreases the inactivation rate of plasmin. Increasing the concentration of antithrombin III, at a constant amount of heparin, results in increase of the inactivation rate. By contrast, the effect of increasing the amount of plasmin in the presence of constant amount of heparin and antithrombin III is such that higher plasmin-to-heparin ratios are associated with lower rates of inactivation. It seems, therefore, that to obtain ;optimal' conditions for fast enzyme inactivation, the amount of heparin should be matched to plasmin rather than to antithrombin III. Arrhenius plots of the plasmin-antithrombin III reaction are linear both in the absence and presence of heparin, at concentrations of 1 or 2mug/ml, over a range of 26K. Under these experimental conditions, heparin increases activation entropy. The findings show that heparin seems to fulfil some criteria that are characteristic for biological catalysis: binding, reaction-rate enhancement (increasing activation entropy), recycling of heparin (effectiveness of non-stoichiometric amounts of the polysaccharide) and specificity.
| S-EPMC1163406 | biostudies-other
Project description:IntroductionAntithrombin, the principal inhibitor of coagulation proteases, requires allosteric activation by its physiological cofactor, heparin or heparin sulfate to achieve physiologically permissible rates. This forms the basis of heparin's use as a clinical anticoagulant. However, heparin therapy is beset with severe complications, giving rise to the need to search new non-heparin activators of antithrombin, devoid of these complications and with favorable safety profiles.Materials and methodsWe chose some representative organic compounds that have been shown to be involved in coagulation modulation by affecting antithrombin and applied a blind docking protocol to find the binding energy and interactions of the modified (sulfated) versus unmodified organic scaffolds.Results and conclusionIncreased sulfation plays a key role in shifting the specificity of organic compounds like quercetin, diosmin, rutin, mangiferin, isomangostin, Trapezifolixanthone and benzofuran towards the heparin binding site (HBS). However, in hesperetin and tetrahydroisoquinoline, sulfation shifts the specificity away from HBS. We have further tried to elucidate changes in the binding affinity of quercetin on account of gradual increase in the number of hydroxyl groups being substituted by sulfate groups. The results show gradual increase in binding energy with increase in sulfation. A theoretical screening approach is an ideal mechanism to predict lead molecules as activators of antithrombin and in determining the specificity for antithrombin.
| S-EPMC3961949 | biostudies-literature
Project description:Regulation of blood coagulation is critical for maintaining blood flow, while preventing excessive bleeding or thrombosis. One of the principal regulatory mechanisms involves heparin activation of the serpin antithrombin (AT). Inhibition of several coagulation proteases is accelerated by up to 10,000-fold by heparin, either through bridging AT and the protease or by inducing allosteric changes in the properties of AT. The anticoagulant effect of short heparin chains, including the minimal AT-specific pentasaccharide, is mediated exclusively through the allosteric activation of AT towards efficient inhibition of coagulation factors (f) IXa and Xa. Here we present the crystallographic structure of the recognition (Michaelis) complex between heparin-activated AT and S195A fXa, revealing the extensive exosite contacts that confer specificity. The heparin-induced conformational change in AT is required to allow simultaneous contacts within the active site and two distinct exosites of fXa (36-loop and the autolysis loop). This structure explains the molecular basis of protease recognition by AT, and the mechanism of action of the important therapeutic low-molecular-weight heparins.
| S-EPMC1456925 | biostudies-literature
Project description:A dilution/quench technique was used to monitor the time course of chemical modification on the heparin-cofactor (a) and progressive thrombin-inhibitory (b) activities of human antithrombin III. Treatment of antithrombin III (AT III) with 2,4,6-trinitrobenzenesulphonate at pH 8.3 and 25 degrees C leads to the loss of (a) at 60-fold more rapid rate than the loss of (b). This is consistent with previous reports [Rosenberg & Damus (1973) J. Biol. Chem. 248, 6490-6505; Pecon & Blackburn (1984) J. Biol. Chem. 259, 935-938] that lysine residues are involved in the binding of heparin to AT III, but not in thrombin binding. Treatment of AT III with phenylglyoxal at pH 8.3 and 25 degrees C again leads to a more rapid loss of (a) than of (b), with the loss of the former proceeding at a 4-fold faster rate. The presence of heparin during modification with phenylglyoxal significantly decreases the rate of loss of (a). Full loss of (a) correlates with the modification of seven arginine residues per inhibitor molecule, whereas loss of (b) does not commence until approximately four arginine residues are modified and is complete upon the modification of approximately eleven arginine residues per inhibitor molecule. This suggests that (the) arginine residue(s) in AT III are involved in the binding of heparin in addition to the known role of Arg-393 at the thrombin-recognition site [Rosenberg & Damus (1973) J. Biol. Chem. 248, 6490-6505; Jörnvall, Fish & Björk (1979) FEBS Lett. 106, 358-362].
| S-EPMC1152703 | biostudies-other