Crystallization of human oxyhaemoglobin from poly(ethylene glycol) solutions.
Ontology highlight
ABSTRACT:
SUBMITTER: Grabowski MJ
PROVIDER: S-EPMC1184159 | biostudies-other | 1978 Apr
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Poly(ethylene glycol) (PEG) hydrogels are highly biocompatible materials extensively used for biomedical and pharmaceutical applications, controlled drug release, and tissue engineering. In this work, PEG cross-linked hydrogels, synthesized under various conditions, were used to grow lysozyme crystals by the counterdiffusion technique. Crystallization experiments were conducted using a three-layer arrangement. Results demonstrated that PEG fibers were incorporated within lysozyme crystals controlling the final crystal shape. PEG hydrogels also induced the nucleation of lysozyme crystals to a higher extent than agarose. PEG hydrogels can also be used at higher concentrations (20-50% w/w) as a separation chamber (plug) in counterdiffusion experiments. In this case, PEG hydrogels control the diffusion of the crystallization agent and therefore may be used to tailor the supersaturation to fine-tune crystal size. As an example, insulin crystals were grown in 10% (w/w) PEG hydrogel. The resulting crystals were of an approximate size of 500 μm.
| S-EPMC4215911 | biostudies-literature
Project description:Amphiphilic polymers can be used to form micelles to deliver water-insoluble drugs. A biodegradable poly(ethylene glycol) (PEG)-poly(beta-amino ester) (PBAE)-PEG triblock copolymer was developed that is useful for drug delivery. It was shown to successfully encapsulate and pH-dependently release a water-insoluble, small molecule anticancer drug, verteporfin. PEG-PBAE-PEG micelle morphology was also controlled through variations to the hydrophobicity of the central PBAE block of the copolymer in order to evade macrophage uptake. Spherical micelles were 50 nm in diameter, while filamentous micelles were 31 nm in width with an average aspect ratio of 20. When delivered to RAW 264.7 mouse macrophages, filamentous micelles exhibited a 89% drop in cellular uptake percentage and a 5.6-fold drop in normalized geometric mean cellular uptake compared to spherical micelles. This demonstrates the potential of high-aspect-ratio, anisotropically shaped PEG-PBAE-PEG micelles to evade macrophage-mediated clearance. Both spherical and filamentous micelles also showed therapeutic efficacy in human triple-negative breast cancer and small cell lung cancer cells without requiring photodynamic therapy to achieve an anticancer effect. Both spherical and filamentous micelles were more effective in killing lung cancer cells than breast cancer cells at equivalent verteporfin concentrations, while spherical micelles were shown to be more effective than filamentous micelles against both cancer cells. Spherical and filamentous micelles at 5 and 10 ?M respective verteporfin concentration resulted in 100% cell killing of lung cancer cells, but both micelles required a higher verteporfin concentration of 20 ?M to kill breast cancer cells at the levels of 80% and 50% respectively. This work demonstrates the potential of PEG-PBAE-PEG as a biodegradable, anisotropic drug delivery system as well as the in vitro use of verteporfin-loaded micelles for cancer therapy.
| S-EPMC6249031 | biostudies-literature
Project description:A novel pH-sensitive polymeric micellar system composed of poly(L-histidine)-b-poly(ethylene glycol) and poly(L-lactide)-b-poly(ethylene glycol) block copolymers was studied by dynamic/static light scattering, spectrofluorimetry and differential scanning calorimetry. The mixed micelles displayed ultra Ph Sensitivity Which Could Be Tuned By Varying The Mixing Ratio Of The Two Polymers. In Particular, Mixed Micelles Composed Of 25 Wt.% Poly(L-lactide)-b-poly(ethylene glycol) exhibited desirable pH dependency which could be used as a drug delivery system that selectively targeted the extracellular pH of acidic solid tumors. Micelles were quite stable from pH 7.4 to 7.0 but underwent a two-stage destabilization as pH decreased further. A significant increase in size and aggregation number was observed when pH dropped to 6.8. Further disruption of the micelle core eventually caused phase separation in the micelle core and dissociation of ionized poly(L-histidine)-b-poly(ethylene glycol) molecules from the micelles as pH decreased to 6.0. Increased electrostatic repulsions which arise from the progressive protonation of imidazole rings overwhelming the hydrophobic interactions among uncharged neutral blocks is considered to be the mechanism for destabilization of the micelle core.
| S-EPMC2276666 | biostudies-literature
Project description:A novel enzyme-responsive hydrogel drug delivery system was developed with the potential to treat inflammation locally. Human neutrophil elastase (HNE) is a serine protease secreted by neutrophils which are the first cells recruited to inflammatory sites. We exploited this cell-secreted enzyme as a biological cue for controlled release. HNE sensitive peptide linkers were immobilized within poly(ethylene glycol) hydrogels using photopolymerization techniques. The kinetics of the enzyme reaction within the gel was tailored by varying the amino acid residues present in the P1 and P1' substrate positions (immediately adjacent to cleavage location). A novel FRET-based hydrogel platform was designed to characterize the accessibility of the substrate within the cross-linked, macroscopic hydrogel. Lastly, a diffusion-reaction mathematical model with Michaelis-Menten kinetics was developed to predict the overall release profile and captured the initial 80% of the experimentally observed release. The hydrogel platform presented shows highly controlled release kinetics with potential applications in cellular responsive drug delivery.
| S-EPMC2699883 | biostudies-literature
Project description:In this work, the methoxy terminated oligo- and polyethylene glycol of different chain lengths (EGn, n = 7, 18, 45 and 136) is grafted on AuNP surfaces under conditions where they attain maximum grafting densities. These EGn-AuNPs gain stability relative to the pristine c-AuNPs in aqueous solutions and in a wide temperature interval and they form stable suspensions in solutions of high NaCl concentrations. To show the thermoresponsive properties of these EGn-AuNPs, temperature titration experiments are carried out in the presence of increasing amounts of salts. The concentrations of NaCl are chosen by checking the stability of EGn-AuNPs at room temperature and choosing the highest concentrations that allow them to form stable suspensions. The analysis of the temperature titration experiments monitored by UV-visible spectroscopy and dynamic light scattering allows us to establish the existence of transitions from individual to assembled nanoparticles, the reversibility of the temperature transitions and hysteretic behaviour in these systems. While EG7-AuNPs only show reversible temperature transitions in the presence of 5 mM NaCl, EG18-AuNPs do up to 1 M NaCl, becoming only partially reversible in 2 M NaCl. The titrations of EG45-AuNPs in 3 and 5 M NaCl show irreversible temperature transitions. Finally, EG136-AuNPs present a complex and interesting behaviour with two temperature transitions, the first one showing hysteresis and the second being reversible.
| S-EPMC9417796 | biostudies-literature
Project description:Apart from biocompatibility, poly(ethylene glycol) (PEG)-based biomedical constructs require mechanical tunability and optimization of microscale transport for regulation of the release kinetics of biomolecules. This study illustrates the role of inhomogeneities due to aggregates and structuring in the PEG matrix in the microscale diffusion of a fluorescent probe. Comparative analysis of fluorescence recovery after photobleaching (FRAP) profiles with the help of diffusion half-time is used to assess the diffusion coefficient (D). The observations support a nontrivial dependence of diffusion dynamics on polymer concentration (volume fraction, φ) and that of fillers carboxymethyl cellulose (CMC) and nanoclay bentonite (B). D values follow the Rouse scaling D ∼ φ-0.54 in PEG solutions. The diffusion time of the fluorescent probe in the PEG+bentonite matrix reveals the onset of depletion interaction-induced phase separation with an increase in bentonite concentration in the PEG matrix beyond 0.1 wt %. Beyond this concentration, structure factors obtained from prebleach FRAP images show a rapid increase at low Q. The two-phase system (PEG-rich and bentonite-rich) was characterized by the hierarchical structural topology of bentonite aggregates, and aggregate sizes were obtained at different length scales with phase contrast imaging, small-angle neutron scattering, and small-angle X-ray scattering. The microscale transport detection presented captures sensitively the commencement of phase separation in the PEG + bentonite matrix, as opposed to the PEG or PEG + CMC matrix, which are observed to be one-phase systems. This method of diffusion half-time and prebleach image analysis can be used for the fast, high-throughput experimental investigation of microscale mechanical response and its correlation with structuring in the polymer matrix.
| S-EPMC10536873 | biostudies-literature
Project description:Coordinated investigations into the interactions between biologically mimicking (biomimetic) material constructs and stem cells advance the potential for the regeneration and possible direct replacement of diseased cells and tissues. Any clinically relevant therapies will require the development and optimization of methods that mass produce fully functional cells and tissues. Despite advances in the design and synthesis of biomaterial scaffolds, one of the biggest obstacles facing tissue engineering is understanding how specific extracellular cues produced by biomaterial scaffolds influence the proliferation and differentiation of various cell sources. Matrix elasticity is one such tailorable property of synthetic scaffolds that is known to differ between tissues. Here, we investigate the interactions between an elastically tailorable polyethylene glycol (PEG)-based hydrogel platform and human bone marrow-derived mesenchymal stem cells (hMSCs). For these studies, two different hydrogel compositions with elastic moduli in the ranges of 50-60 kPa and 8-10 kPa were implemented. Our findings demonstrate that the different elasticities in this platform can produce changes in hMSC morphology and proliferation, indicating that the platform can be implemented to produce changes in hMSC behavior and cell state for a broad range of tissue engineering and regenerative applications. Furthermore, we show that the platform's different elasticities influence stem cell differentiation potential, particularly when promoting stem cell differentiation toward cell types from tissues with stiffer elasticity. These findings add to the evolving and expanding library of information on stem cell-biomaterial interactions and opens the door for continued exploration into PEG-based hydrogel scaffolds for tissue engineering and regenerative medicine applications.
| S-EPMC6007362 | biostudies-literature
Project description:Binding of anti-PEG antibodies to poly(ethylene glycol) (PEG) on the surface of PEGylated liposomal doxorubicin (PLD) in vitro and in rats can activate complement and cause the rapid release of doxorubicin from the liposome interior. Here, we find that irinotecan liposomes (IL) and L-PLD, which have 16-fold lower levels of 1,2-distearoyl-sn-glycero-3-phosphoethanolamine (DSPE)-PEG2000 in their liposome membrane as compared to PLD, generate less complement activation but remain sensitive to destabilization and drug release by anti-PEG antibodies. Complement activation and liposome destabilization correlated with the theoretically estimated number of antibody molecules bound per liposome. Drug release from liposomes proceeded through the alternative complement pathway but was accelerated by the classical complement pathway. In contrast to PLD destabilization by anti-PEG immunoglobulin G (IgG), which proceeded by the insertion of membrane attack complexes in the lipid bilayer of otherwise intact PLD, anti-PEG IgG promoted the fusion of L-PLD, and IL to form unilamellar and oligo-vesicular liposomes. Anti-PEG immunoglobulin M (IgM) induced drug release from all liposomes (PLD, L-PLD, and IL) via the formation of unilamellar and oligo-vesicular liposomes. Anti-PEG IgG destabilized both PLD and L-PLD in rats, indicating that the reduction of PEG levels on liposomes is not an effective approach to prevent liposome destabilization by anti-PEG antibodies.
| S-EPMC11342370 | biostudies-literature
Project description:The LCST behavior of poly(ethylene glycol) (PEG) in aqueous sodium sulfate solutions was exploited to fabricate microspheres without the use of other monomers, polymers, surfactants or organic solvents. Reactive PEG derivatives underwent thermally induced phase separation to produce spherical PEG-rich domains that coarsened in size pending gelation, resulting in stable hydrogel microspheres between approximately 1 and 100 microns in size. The time required to reach the gel point during the coarsening process and the extent of crosslinking after gelation both affected the final microsphere size and swelling ratio. The gel point could be varied by pre-reaction of the PEG derivatives below the cloud point, or by controlling pH and temperature above the cloud point. Pre-reaction brought the PEG derivatives closer to the gel point prior to phase separation, while the pH and temperature influenced the rate of reaction. Dynamic light scattering indicated a percolation-to-cluster transition about 3-5 min following phase separation. The mean radius of PEG-rich droplets subsequently increased with time to the 1/4th power until gelation. PEG microspheres produced by these methods with controlled sizes and densities may be useful for the production of modular scaffolds for tissue engineering.
| S-EPMC2756745 | biostudies-literature
Project description:Clickable poly(ethylene glycol) (PEG) derivatives are used with two sequential aqueous two-phase systems to produce microsphere-based scaffolds for cell encapsulation. In the first step, sodium sulfate causes phase separation of the clickable PEG precursors and is followed by rapid geleation to form microspheres in the absence of organic solvent or surfactant. The microspheres are washed and then deswollen in dextran solutions in the presence of cells, producing tightly packed scaffolds that can be easily handled while also maintaining porosity. Endothelial cells included during microsphere scaffold formation show high viability. The clickable PEG-microsphere-based cell scaffolds open up new avenues for manipulating scaffold architecture as compared with simple bulk hydrogels.
| S-EPMC3774304 | biostudies-literature