Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A COLORIMETRIC MICRO-METHOD FOR THE DETERMINATION OF GLUTATHIONE.

ABSTRACT: 1. A rapid colorimetric and apparently specific micromethod for the determination of total glutathione in small amounts of tissue is described. Generally, less than 30mg. of tissue is sufficient and this is homogenized in ice-cold 3% metaphosphoric acid. The product is filtered through sintered glass and neutralized or diluted before being added to a cuvette containing phosphate buffer, pH7.1, 5,5'-dithiobis-(2-nitrobenzoic acid), EDTA and glutathione reductase. Addition of NADPH(2) to the system initiates a progressive reduction of 5,5'-dithiobis-(2-nitrobenzoic acid) by catalytic amounts of GSH, and this causes a colour increase at 412mmu. The rate of this change, calculated over 5min., is proportional to the total amount of glutathione present, and consequently unknown concentrations may be determined by reference to standards. 2. A preparation (based on that of Racker, 1955) of a suitable sample of glutathione reductase from yeast is described. 3. A less specific and less sensitive determination of extracted thiol groups with 5,5'-dithiobis-(2-nitrobenzoic acid) at pH8.0, based on observations of Ellman (1959) and Jocelyn (1962), is also described. 4. Although the precise nature of the reaction is not known, evidence is put forward to support a process of cyclo-reduction. GSSG is reduced enzymically to GSH, which reacts with 5,5'-dithiobis-(2-nitrobenzoic acid) to produce a coloured ion: [Formula: see text] (E(max.) 412mmu) and a mixed disulphide. This disulphide reacts with further quantities of GSH to liberate another ion and GSSG, which then re-enters the cycle.

SUBMITTER: OWENS CW

PROVIDER: S-EPMC1206606 | biostudies-other | 1965 Mar

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

A colorimetric micro method for the determination of formyl groups.

Project description:The characteristic purple colour formed by N-formyl-N'-2,4-dinitrophenyl-hydrazine in the presence of piperidine and acetone was made the basis of a new quantitative method for the determination of formyl groups. Samples containing N-formyl groups (up to 0.4mumole) are hydrazinolysed at 97-98 degrees for 1hr. and are dinitrophenylated after the removal of excess of hydrazine. Interference from 2,4-dinitrophenylhydrazine is eliminated by subjecting the dinitrophenylated samples to chromatography on an alumina column. Interference arising from the formation of N-acetyl-N'-2,4-dinitrophenylhydrazine, when determining formyl groups in samples containing acetyl, can be avoided by a paper-chromatographic separation before analysis. A standard procedure is described. The method gives satisfactory results when applied to N-formyl-amino acids. Gramicidin, when analysed by this method, was found to contain 0.89 mole of formyl group/mole for a molecular weight of 1880. The method indicated the absence of formyl groups from lysozyme, a protein known not to contain such groups. Generally, the analytical values obtained by the method are within 100+/-4% of theory.

| S-EPMC1187558 | biostudies-other

A colorimetric-based accurate method for the determination of enterovirus 71 titer.

Project description:The 50 % tissue culture infectious dose (TCID50) is still one of the most commonly used techniques for estimating virus titers. However, the traditional TCID50 assay is time consuming, susceptible to subjective errors and generates only quantal data. Here, we describe a colorimetric-based approach for the titration of Enterovirus 71 (EV71) using a modified method for making virus dilutions. In summary, the titration of EV71 using MTT or MTS staining with a modified virus dilution method decreased the time of the assay and eliminated the subjectivity of observational results, improving accuracy, reproducibility and reliability of virus titration, in comparison with the conventional TCID50 approach (p < 0.01). In addition, the results provided evidence that there was better correlation between a plaquing assay and our approach when compared to the traditional TCID50 approach. This increased accuracy also improved the ability to predict the number of virus plaque forming units present in a solution. These improvements could be of use for any virological experimentation, where a quick accurate titration of a virus capable of causing cell destruction is required or a sensible estimation of the number of viral plaques based on TCID50 of a virus is desired.

| S-EPMC3550799 | biostudies-literature

One Step Synthesis of a Gold/Ordered Mesoporous Carbon Composite Using a Hard Template Method for Electrocatalytic Oxidation of Methanol and Colorimetric Determination of Glutathione.

Project description:Ordered mesoporous carbon-supported gold nanoparticles (Au/OMC) have been fabricated in one step through a hard template method using gold nanoparticle-intercalated mesoporous silica (GMS) to explore two different catalytic properties, for example, electrocatalytic oxidation of methanol and colorimetric determination of glutathione (GSH). The catalytically inert but conducting nature of mesoporous carbon (OMC) and promising catalytic activity of gold nanoparticles (AuNPs) has inspired us to synthesize Au/OMC. The as-prepared Au/OMC catalyst was characterized by powder X-ray diffraction, N2 adsorption-desorption, scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray analysis-elemental mapping, and X-ray photoelectron spectroscopy. The characterization results indicate that AuNPs are uniformly distributed on the surface of OMC. The conducting-OMC framework with a high surface area of Au/OMC provides superior transport of electrons through the porous surface of carbon matrix and resulted in its high efficiency and stability as an electrocatalyst for the oxidation of methanol in comparison to CMK-3, SBA-15, and GMS in alkaline medium. The efficiency of Au/OMC toward methanol oxidation in alkaline medium is much higher in comparison to that in acidic medium. The lower value of I f/I b in the acidic medium in comparison to that in the alkaline medium clearly indicates that the oxidation process with Au/OMC as a catalyst is much more superior in alkaline medium with better tolerance toward the accumulation of intermediate CO species on the active surface area. Furthermore, the Au/OMC catalyst is successfully utilized for the detection and quantification of GSH spectrophotometrically with a limit of detection value of 0.604 nM.

| S-EPMC6787891 | biostudies-literature

Determination of hydrogen peroxide on N95 masks after sanitization using a colorimetric method.

Project description:Hydrogen peroxide is commonly used as a sterilizing agent for medical devices and its use has recently been extended to N95 masks during PPE shortages as a result of the COVID-19 pandemic. The hydrogen peroxide remaining on the masks after sterilization could potentially pose a health hazard to the mask users. In the present study a colorimetric method was optimized for the determination of hydrogen peroxide on N95 masks following chemical sanitizations. The developed analytical method demonstrated an overall recovery of 98% ± 7%. The limit of detection ranged from 0.16 to 0.25 mg/mask, depending on the type of mask. The expanded measurement uncertainty was 13% (at a 95% confidence interval). The sanitization process itself introduced a significant variation in hydrogen peroxide load between masks. The ozone used in the sanitization process had no significant impact on analytical performance. Stamped and printed marks on the mask surfaces could induce biased readings. Hydrogen peroxide decomposes quickly on the mask surfaces so timing of analysis is an important factor in method standardization.•The validation data demonstrated that the in-house method is reliable and fit for the intended purpose, offering a sensitive, simple, rapid, and inexpensive method of residue monitoring.

| S-EPMC8374716 | biostudies-literature

A colorimetric method for the molecular weight determination of polyethylene glycol using gold nanoparticles.

Project description:A gold nanoparticle (AuNP)-based colorimetric method was developed for the molecular weight (MW) determination of polyethylene glycol (PEG), a commonly used hydrophilic polymer. Addition of a salt solution to PEG-coated AuNP solutions helps in screening the electrostatic repulsion between nanoparticles and generating a color change of the solutions from wine red to blue in 10 min in accordance with the MW of PEG, which illustrates the different stability degrees (SDs) of the AuNPs. The SDs are calculated by the absorbance ratios of the stable to the aggregated AuNPs in the solution. The root mean square end-to-end length (?h2?1/2) of PEG molecules shows a linear fit to the SDs of the PEG-coated AuNPs in a range of 1.938?±?0.156 to 10.151?±?0.176 nm. According to the Derjaguin-Landau-Verwey-Overbeek theory, the reason for this linear relationship is that the thickness of the PEG adlayer is roughly equivalent to the ?h2?1/2 of the PEG molecules in solution, which determines the SDs of the AuNPs. Subsequently, the MW of the PEG can be obtained from its ?h2?1/2 using a mathematical relationship between ?h2?1/2 and MW of PEG molecule. Applying this approach, we determined the ?h2?1/2 and the MW of four PEG samples according to their absorbance values from the ordinary ultraviolet-visible spectrophotometric measurements. Therefore, the MW of PEG can be distinguished straightforwardly by visual inspection and determined by spectrophotometry. This novel approach is simple, rapid, and sensitive.

| S-EPMC3878192 | biostudies-literature

AN IMPROVED COLORIMETRIC METHOD FOR THE DETERMINATION OF PROLINE IN THE PRESENCE OF OTHER NINHYDRIN-POSITIVE COMPOUNDS.

Project description:1. The conditions required for sensitive and specific colorimetric determination of proline with acidified ninhydrin were investigated. 2. A method applicable to protein samples was developed. 3. The only compound found to interfere appreciably was a hydroxyproline.

| S-EPMC1206430 | biostudies-other

A Wash-Free Homogeneous Colorimetric Immunoassay Method.

Project description:Rapid and convenient biosensing platforms could be beneficial to timely diagnosis and treatment of diseases in virtually any care settings. Sandwich immunoassays, the most commonly used methods for protein detection, often rely on expensive tags such as enzyme and tedious wash and incubation procedures operated by skilled labor. In this report, we revolutionized traditional sandwich immunoassays by providing a wash-free homogeneous colorimetric immunoassay method without requirement of any separation steps. The proposed strategy was realized by controlling the growth of gold nanoparticles (AuNPs) to mediate the interparticle spacing in the protein-AuNP oligomers. We have demonstrated the successful in vitro detection of cancer biomarker in serum samples from patients with high clinical sensitivity and specificity.

| S-EPMC4679354 | biostudies-literature

A micro method for simultaneous determination of galactosyltransferase and 5'-nucleotidase activities in cell fractions.

Project description:Galactosyltransferase and 5'-nucleotidase were assayed in the same reaction mixture, with ovalbumin as exogenous acceptor of (14-C)galactose and with (3-H)AMP as the substrate for the 5'-nucleotidase assay. The substrates and reaction products of either assay had no significant effect on the activity of the other enzyme.

| S-EPMC1165366 | biostudies-other

Micro method for determination of reactive carbonyl groups in proteins and peptides, using 2,4-dinitrophenylhydrazine.

Project description:A method is described for determining carbonyl groups that is especially suitable for use with proteins and peptides. It involves the determination of the extinction at 370nm of a sample solution after adding 2,4-dinitrophenylhydrazine. The reaction of 2,4-dinitrophenylhydrazine with pyruvoylglycine and with transaminated ribonuclease T(1) is presented; the isolation of protein hydrazones is discussed.

| S-EPMC1176632 | biostudies-other

Colorimetric determination of urea using diacetyl monoxime with strong acids.

Project description:Urea is a byproduct of the urea cycle in metabolism and is excreted through urine and sweat. Ammonia, which is toxic at low levels, is converted to the safe storage form of urea, which represents the largest efflux of nitrogen from many organisms. Urea is an important nitrogen source in agriculture, is added to many industrial products, and is a large component in wastewater. The enzyme urease hydrolyzes urea to ammonia and bicarbonate. This reaction is microbially mediated in soils, hydroponic solutions, and wastewater recycling and is catalyzed in vivo in plants using native urease, making measurement of urea environmentally important. Both direct and indirect methods to measure urea exist. This protocol uses diacetyl monoxime to directly determine the concentration of urea in solution. The protocol provides repeatable results and stable reagents with good color stability and simple measurement techniques for use in any lab with a spectrophotometer. The reaction between diacetyl monoxime and urea in the presence of sulfuric acid, phosphoric acid, thiosemicarbazide, and ferric chloride produces a chromophore with a peak absorbance at 520 nm and a linear relationship between concentration and absorbance from 0.4 to 5.0 mM urea in this protocol. The lack of detectable interferences makes this protocol suitable for the determination of millimolar levels of urea in wastewater streams and hydroponic solutions.

| S-EPMC8575183 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data