Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Three-dimensional numerical modeling and computational fluid dynamics simulations to analyze and improve oxygen availability in the AMC bioartificial liver.

ABSTRACT: A numerical model to investigate fluid flow and oxygen (O(2)) transport and consumption in the AMC-Bioartificial Liver (AMC-BAL) was developed and applied to two representative micro models of the AMC-BAL with two different gas capillary patterns, each combined with two proposed hepatocyte distributions. Parameter studies were performed on each configuration to gain insight in fluid flow, shear stress distribution and oxygen availability in the AMC-BAL. We assessed the function of the internal oxygenator, the effect of changes in hepatocyte oxygen consumption parameters in time and the effect of the change from an experimental to a clinical setting. In addition, different methodologies were studied to improve cellular oxygen availability, i.e. external oxygenation of culture medium, culture medium flow rate, culture gas oxygen content (pO(2)) and the number of oxygenation capillaries. Standard operating conditions did not adequately provide all hepatocytes in the AMC-BAL with sufficient oxygen to maintain O(2) consumption at minimally 90% of maximal uptake rate. Cellular oxygen availability was optimized by increasing the number of gas capillaries and pO(2) of the oxygenation gas by a factor two. Pressure drop over the AMC-BAL and maximal shear stresses were low and not considered to be harmful. This information can be used to increase cellular efficiency and may ultimately lead to a more productive AMC-BAL.

SUBMITTER: Mareels G

PROVIDER: S-EPMC1705524 | biostudies-other | 2006 Nov

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Meniscus of a Magnetic Fluid in the Field of a Current-Carrying Wire: Three-Dimensional Numerical Simulations.

Project description:Three-dimensional calculations of the meniscus of a magnetic fluid placed around a current carrying vertical and cylindrical wire are presented. Based on the material properties of experimentally used magnetic fluids, the numerically determined menisci are compared with the experimentally measured ones reported by May. The comparison is made for a linear law of magnetisation as well as for the experimentally measured nonlinear magnetisation curve. Up to moderate strengths of the applied current ( I < = 45 A), i.e., up to moderate strengths of the magnetic field close to the wire, the calculated profiles agree satisfyingly with the experimentally measured ones for a linear as well as for a nonlinear law of magnetisation. At a great strength of the applied current ( I = 70 A), i.e., at a large strength of the magnetic field close to the wire, the agreement is less good than in the range up to moderate strengths. Our analysis revealed that the numerically assumed isothermal conditions are not present in the experiment, particularly at the great strength of the applied current. A control of the temperature in the experiment and the implementation of a coupled thermal model in the numerics are considered the most relevant future steps for an improved agreement.

| S-EPMC7040835 | biostudies-literature

Numerical Simulations of Calcium Sulphate Scaling in Full-Scale Brackish Water Reverse Osmosis Pressure Vessels Using Computational Fluid Dynamics.

Project description:Coal mine waters often have high salinity, hardness and alkalinity. The treatment of coal mine water requires careful management of multi-stage reverse osmosis (RO) systems to achieve effective recovery of water for domestic reuse, as well as zero liquid discharge to minimise the impact to the local environment. Design of RO systems for coal mine water treatment has been limited to the use of commercial design packages provided by membrane manufacturers, which do not provide insights into the impact of operating parameters such as feedwater salinity, concentrations of sparingly soluble salts, feed pressure and their interactions with different RO modules on the fouling/scaling potential of RO membranes. This also restricts the use of novel RO products and the delivery of an optimum design based on real needs. In this work, a mathematical model was developed to simulate a standard brackish water RO pressure vessel consisting six full-size RO membrane elements, using computational fluid dynamics (CFD). The model can be used to predict the permeate flowrate, water recovery levels, as well as the spatial information of the accumulation and scaling potential of sparingly soluble salts on the membrane surface. The results obtained from the model showed good agreement with the results obtained from the commercial RO design software WAVE. The CFD model was then used to predict the scaling threshold on various positions of a full-scale RO element, at different operating conditions, using parametric simulations based on Central Composite Designs. Outputs from this work not only provide insights into the microscopic flow characteristics of multiple full-scale elements in the RO pressure vessel, but also predicts the position where scaling would occur, at different feed conditions, for any RO products.

| S-EPMC8306596 | biostudies-literature

Oxygen-controlled three-dimensional cultures to analyze tumor angiogenesis.

Project description:Tumor angiogenesis is controlled by the integrated action of physicochemical and biological cues; however, the individual contributions of these cues are not well understood. We have designed alginate-based microscale tumor models to define the distinct importance of oxygen concentration, culture dimensionality, and cell-extracellular matrix interactions on the angiogenic capability of oral squamous cell carcinoma, and have verified the relevance of our findings with U87 glioblastoma cells. Our results revealed qualitative differences in the microenvironmental regulation of vascular endothelial growth factor (VEGF) and interleukin-8 (IL-8) secretion in three-dimensional (3D) culture. Specifically, IL-8 secretion was highest under ambient conditions, whereas VEGF secretion was highest in hypoxic cultures. Additionally, 3D integrin engagement by RGD-modified alginate matrices increased IL-8 secretion independently of oxygen, whereas VEGF secretion was only moderately affected by cell-extracellular matrix interactions. Using two-dimensional migration assays and a new 3D tumor angiogenesis model, we demonstrated that the resulting angiogenic signaling promotes tumor angiogenesis by increasing endothelial cell migration and invasion. Collectively, tissue-engineered tumor models improve our understanding of tumor angiogenesis, which may ultimately advance anticancer therapies.

| S-EPMC2947932 | biostudies-literature

Oxygen and seizure dynamics: II. Computational modeling.

Project description:Electrophysiological recordings show intense neuronal firing during epileptic seizures leading to enhanced energy consumption. However, the relationship between oxygen metabolism and seizure patterns has not been well studied. Recent studies have developed fast and quantitative techniques to measure oxygen microdomain concentration during seizure events. In this article, we develop a biophysical model that accounts for these experimental observations. The model is an extension of the Hodgkin-Huxley formalism and includes the neuronal microenvironment dynamics of sodium, potassium, and oxygen concentrations. Our model accounts for metabolic energy consumption during and following seizure events. We can further account for the experimental observation that hypoxia can induce seizures, with seizures occurring only within a narrow range of tissue oxygen pressure. We also reproduce the interplay between excitatory and inhibitory neurons seen in experiments, accounting for the different oxygen levels observed during seizures in excitatory vs. inhibitory cell layers. Our findings offer a more comprehensive understanding of the complex interrelationship among seizures, ion dynamics, and energy metabolism.

| S-EPMC4064403 | biostudies-literature

Computational Fluid Dynamics Simulations of Mitral Paravalvular Leaks in Human Heart.

Project description:In recent years, computational fluid dynamics (CFD) has been extensively used in biomedical research on heart diseases due to its non-invasiveness and relative ease of use in predicting flow patterns inside the cardiovascular system. In this study, a modeling approach involving CFD simulations was employed to study hemodynamics inside the left ventricle (LV) of a human heart affected by a mitral paravalvular leak (PVL). A simplified LV geometry with four PVL variants that varied in shape and size was studied. Predicted blood flow parameters, mainly velocity and shear stress distributions, were used as indicators of how presence of PVLs correlates with risk and severity of hemolysis. The calculations performed in the study showed a high risk of hemolysis in all analyzed cases, with the maximum shear stress values considerably exceeding the safe level of 300 Pa. Results of our study indicated that there was no simple relationship between PVL geometry and the risk of hemolysis. Two factors that potentially played a role in hemolysis severity, namely erythrocyte exposure time and the volume of fluid in which shear stress exceeded a critical value, were not directly proportional to any of the characteristic geometrical parameters (shape, diameters, circumference, area, volume) of the PVL channel. Potential limitations of the proposed simplified approach of flow analysis are discussed, and possible modifications to increase the accuracy and plausibility of the results are presented.

| S-EPMC8658524 | biostudies-literature

Computational Fluid Dynamics Modeling of Liver Radioembolization: A Review.

Project description:Yttrium-90 radioembolization (RE) is a widely used transcatheter intraarterial therapy for patients with unresectable liver cancer. In the last decade, computer simulations of hepatic artery hemodynamics during RE have been performed with the aim of better understanding and improving the therapy. In this review, we introduce the concept of computational fluid dynamics (CFD) modeling with a clinical perspective and we review the CFD models used to study RE from the fluid mechanics point of view. Finally, we show what CFD simulations have taught us about the hemodynamics during RE, the current capabilities of CFD simulations of RE, and we suggest some future perspectives.

| S-EPMC8716346 | biostudies-literature

Direct numerical simulations of three-dimensional surface instability patterns in thin film-compliant substrate structures.

Project description:A comprehensive numerical study of three-dimensional surface instability patterns is presented. The formation of wrinkles is a consequence of deformation instability when a thin film, bonded to a compliant substrate, is subject to in-plane compressive loading. We apply a recently developed computational approach to directly simulate complex surface wrinkling from pre-instability to post-instability in a straightforward manner, covering the entire biaxial loading spectrum from pure uniaxial to pure equi-biaxial compression. The simulations use embedded imperfections with perturbed material properties at the film-substrate interface. This approach not only triggers the first bifurcation mode but also activates subsequent post-buckling states, thus capable of predicting the temporal evolution of wrinkle patterns in one simulation run. The state of biaxiality is found to influence the surface pattern significantly, and each bifurcation mode can be traced back to certain abrupt changes in the overall load-displacement response. Our systematic study reveals how the loading condition dictates the formation of various instability modes including one-dimensional (1D) sinusoidal wrinkles, herringbone, labyrinth, and checkerboard.

| S-EPMC8361117 | biostudies-literature

Sinus irrigations before and after surgery-Visualization through computational fluid dynamics simulations.

Project description:Topical sinus irrigations play a critical role in the management of sinonasal disease, and the improvement in irrigant penetration into the sinuses postoperatively greatly contributes to the success of endoscopic sinus surgery. Prior investigations on postoperative sinus irrigations have been mostly limited to cadaver studies, which are labor intensive and do not capture the full dynamics of the flows. A pilot study was conducted to investigate the impact of surgery on sinus irrigation through computational fluid dynamics (CFD) simulations.Retrospective computational study.Pre- and postoperative computed tomography (CT) scans were obtained on a patient who underwent standard endoscopic surgeries for all sinuses, including a Draf III frontal sinusotomy. CT-based pre- and postoperative CFD models then simulated irrigations of 120 mL saline per nostril at 12 mL/s (typical of Sinugator) and 60 mL/s (SinusRinse Bottle), in two head positions: face parallel and at a 45° angle to the ground.Overall, surgery most significantly improved frontal sinus irrigation, but surprisingly resulted in less maxillary and ethmoid sinuses penetration. This may due to the partial removal of the septum during the Draf III, causing most fluid to exit prematurely across the resected septum. Higher flow rate slightly improved ethmoid sinus irrigation, but resulted in less preoperative contralateral maxillary sinus penetration.CFD modeling of sinonasal irrigations is a novel technique for evaluating irrigant penetration of individual sinus cavities. It may prove useful in determining the optimal degree of surgery or the ideal irrigation strategy to allow for maximal and targeted sinus irrigant penetration.NA Laryngoscope, 126:E90-E96, 2016.

| S-EPMC5084453 | biostudies-literature

Numerical simulations of drumlin formation.

Project description:We summarize the present form of the instability theory for drumlin formation, which describes the coupled subglacial flow of ice, water and sediment. This model has evolved over the last 20 years, and is now at the point where it can predict instabilities corresponding to ribbed moraine, drumlins and mega-scale glacial lineations, but efforts to provide numerical solutions of the model have been limited. The present summary adds some slight nuances to previously published versions of the theory, notably concerning the constitutive description of the subglacial water film and its flow. A new numerical method is devised to solve the model, and we show that it can be solved for realistic values of most of the parameters, with the exception of that corresponding to the water film thickness. We show that evolved bedforms can be three-dimensional and of the correct sizes, and we explore to some extent the variation of the solutions with the model's parameters.

| S-EPMC5582181 | biostudies-literature

Uncertainty in aspiration efficiency estimates from torso simplifications in computational fluid dynamics simulations.

Project description:Computational fluid dynamics (CFD) has been used to report particle inhalability in low velocity freestreams, where realistic faces but simplified, truncated, and cylindrical human torsos were used. When compared to wind tunnel velocity studies, the truncated models were found to underestimate the air's upward velocity near the humans, raising questions about aspiration estimation. This work compares aspiration efficiencies for particles ranging from 7 to 116 µm using three torso geometries: (i) a simplified truncated cylinder, (ii) a non-truncated cylinder, and (iii) an anthropometrically realistic humanoid body. The primary aim of this work is to (i) quantify the errors introduced by using a simplified geometry and (ii) determine the required level of detail to adequately represent a human form in CFD studies of aspiration efficiency. Fluid simulations used the standard k-epsilon turbulence models, with freestream velocities at 0.1, 0.2, and 0.4 m s(-1) and breathing velocities at 1.81 and 12.11 m s(-1) to represent at-rest and heavy breathing rates, respectively. Laminar particle trajectory simulations were used to determine the upstream area, also known as the critical area, where particles would be inhaled. These areas were used to compute aspiration efficiencies for facing the wind. Significant differences were found in both vertical velocity estimates and the location of the critical area between the three models. However, differences in aspiration efficiencies between the three forms were <8.8% over all particle sizes, indicating that there is little difference in aspiration efficiency between torso models.

| S-EPMC3634334 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data