Dataset Information

Influence of convolution filtering on coronary plaque attenuation values: observations in an ex vivo model of multislice computed tomography coronary angiography.

ABSTRACT: Attenuation variability (measured in Hounsfield Units, HU) of human coronary plaques using multislice computed tomography (MSCT) was evaluated in an ex vivo model with increasing convolution kernels. MSCT was performed in seven ex vivo left coronary arteries sunk into oil followingthe instillation of saline (1/infinity) and a 1/50 solution of contrast material (400 mgI/ml iomeprol). Scan parameters were: slices/collimation, 16/0.75 mm; rotation time, 375 ms. Four convolution kernels were used: b30f-smooth, b36f-medium smooth, b46f-medium and b60f-sharp. An experienced radiologist scored for the presence of plaques and measured the attenuation in lumen, calcified and noncalcified plaques and the surrounding oil. The results were compared by the ANOVA test and correlated with Pearson's test. The signal-to-noise ratio (SNR) and contrast-to-noise ratio (CNR) were calculated. The mean attenuation values were significantly different between the four filters (p < 0.0001) in each structure with both solutions. After clustering for the filter, all of the noncalcified plaque values (20.8 +/- 39.1, 14.2 +/- 35.8, 14.0 +/- 32.0, 3.2 +/- 32.4 HU with saline; 74.7 +/- 66.6, 68.2 +/- 63.3, 66.3 +/- 66.5, 48.5 +/- 60.0 HU in contrast solution) were significantly different, with the exception of the pair b36f-b46f, for which a moderate-high correlation was generally found. Improved SNRs and CNRs were achieved by b30f and b46f. The use of different convolution filters significantly modifief the attenuation values, while sharper filtering increased the calcified plaque attenuation and reduced the noncalcified plaque attenuation.

SUBMITTER: Cademartiri F

PROVIDER: S-EPMC1914219 | biostudies-other | 2007 Jul

REPOSITORIES: biostudies-other

ACCESS DATA

Similar Datasets

Project description:ObjectivesTo determine normal pericoronary adipose tissue mean attenuation (PCATMA) values for left the anterior descending (LAD), left circumflex (LCX), and right coronary artery (RCA) in patients without plaques on coronary CT angiography (cCTA), taking into account tube voltage influence.MethodsThis retrospective study included 192 patients (76 (39.6%) men; median age 49 years (range, 19-79)) who underwent cCTA with third-generation dual-source CT for the suspicion of CAD between 2015 and 2017. We selected patients without plaque on cCTA. PCATMA was measured semi-automatically on cCTA images in the proximal segment of the three main coronary arteries with 10 mm length. Paired t-testing was used to compare PCATMA between combinations of two coronary arteries within each patient, and one-way ANOVA testing was used to compare PCATMA in different kV groups.ResultsThe overall mean ± standard deviation (SD) PCATMA was - 90.3 ± 11.1 HU. PCATMA in men was higher than that in women: - 88.5 ± 10.5 HU versus - 91.5 ± 11.3 HU (p = 0.001). PCATMA of LAD, LCX, and RCA was - 92.4 ± 11.6 HU, - 88.4 ± 9.9 HU, and - 90.2 ± 11.4 HU, respectively. Pairwise comparison of the arteries showed significant difference in PCATMA: LAD and LCX (p < 0.001), LAD and RCA (p = 0.009), LCX and RCA (p = 0.033). PCATMA of the 70 kV, 80 kV, 90 kV, 100 kV, and 120 kV groups was - 95.6 ± 9.6 HU, - 90.2 ± 11.5 HU, - 87.3 ± 9.9 HU, - 82.7 ± 6.2 HU, and - 79.3 ± 6.8 HU, respectively (p < 0.001).ConclusionsIn patients without plaque on cCTA, PCATMA varied by tube voltage, with minor differences in PCATMA between coronary arteries (LAD, LCX, RCA). PCATMA values need to be interpreted taking into account tube voltage setting.Key points• In patients without plaque on cCTA, PCATMA differs slightly by coronary artery (LAD, LCX, RCA). • Tube voltage of cCTA affects PCATMA measurement, with mean PCATMA increasing linearly with increasing kV. • For longitudinal cCTA analysis of PCATMA , the use of equal kV setting is strongly recommended.

Project description:Purpose To assess the relationship between total, calcified, and noncalcified coronary plaque burdens throughout the entire coronary vasculature at coronary computed tomographic (CT) angiography in relationship to cardiovascular risk factors in asymptomatic individuals with low-to-moderate risk. Materials and Methods This HIPAA-compliant study had institutional review board approval, and written informed consent was obtained. Two hundred two subjects were recruited to an ongoing prospective study designed to evaluate the effect of HMG-CoA reductase inhibitors on atherosclerosis. Eligible subjects were asymptomatic individuals older than 55 years who were eligible for statin therapy. Coronary CT angiography was performed by using a 320-detector row scanner. Coronary wall thickness and plaque were evaluated in all epicardial coronary arteries greater than 2 mm in diameter. Images were analyzed by using dedicated software involving an adaptive lumen attenuation algorithm. Total plaque index (calcified plus noncalcified plaque) was defined as plaque volume divided by vessel length. Multivariable regression analysis was performed to determine the relationship between risk factors and plaque indexes. Results The mean age of the subjects was 65.5 years ± 6.9 (standard deviation) (36% women), and the median coronary artery calcium (CAC) score was 73 (interquartile range, 1-434). The total coronary plaque index was higher in men than in women (42.06 mm(2) ± 9.22 vs 34.33 mm(2) ± 8.35; P < .001). In multivariable analysis controlling for all risk factors, total plaque index remained higher in men than in women (by 5.01 mm(2); P = .03) and in those with higher simvastatin doses (by 0.44 mm(2)/10 mg simvastatin dose equivalent; P = .02). Noncalcified plaque index was positively correlated with systolic blood pressure (β = 0.80 mm(2)/10 mm Hg; P = .03), diabetes (β = 4.47 mm(2); P = .03), and low-density lipoprotein (LDL) cholesterol level (β = 0.04 mm(2)/mg/dL; P = .02); the association with LDL cholesterol level remained significant (P = .02) after additional adjustment for the CAC score. Conclusion LDL cholesterol level, systolic blood pressure, and diabetes were associated with noncalcified plaque burden at coronary CT angiography in asymptomatic individuals with low-to-moderate risk. (©) RSNA, 2015 Online supplemental material is available for this article.

Project description:PurposeTo determine the impact of low tube voltage coronary CT angiography on detection of subclinical atherosclerosis.Materials and methodsRetrospective sampling of an emergency department coronary CT angiography registry was performed. All patients in the registry underwent a noncontrast coronary artery calcium (CAC) scoring scan at 120 kV before coronary CT angiography. The study sample (n = 264) constituted patients with subclinical atherosclerosis (Coronary Artery Disease Reporting and Data System™ [CAD-RADS] 1 or 2) randomly mixed one-to-one with patients without atherosclerosis (CAD-RADS 0). The patients with coronary CT angiography performed at 70-90 kV were considered the low tube voltage group (n = 159) and patients with coronary CT angiography performed at 100-120 kV were considered the standard tube voltage group (n = 105). The number of coronary plaques and overall CAD-RADS classification (per patient) were evaluated twice: initially, by reading coronary CT angiography alone, and then, by coronary CT angiography in combination with a CAC scan. Considering the combined reading (CT angiography plus CAC scan) as the reference standard, the performance of coronary CT angiography alone was assessed for plaque detection and appropriate CAD-RADS (per patient) classification. The comparisons were made between the low tube voltage and standard tube voltage groups by using a Fisher exact test and χ2 test for proportions and a Mann-Whitney test and Kruskal-Wallis test for means.ResultsIn total, 455 plaques were identified in 118 patients (70 of 159 patients in the low tube voltage group; 48 of 105 in the standard tube voltage group). When reading coronary CT angiographic images alone, 97 of 455 (21%) plaques were missed that led to an incorrect CAD-RADS classification in 16 of 264 (6%) studies (interpreted as CAD-RADS 0 instead of CAD-RADS 1 or 2). Missed plaques were significantly more frequent in the low tube voltage group versus the standard tube voltage group (41% [85 of 206] vs 5% [12 of 249], respectively; P < .001). Incorrect CAD-RADS classification was also seen more commonly in the low tube voltage group (8.8% [14 of 159] vs 2% [two of 105]; P = .01), typically at low plaque burden (median CAC score, 1; range, 1-4). Calcified plaques that appeared isodense to luminal contrast material attenuation were seen more frequently in the low tube voltage group compared with the standard tube voltage group (20% [32 of 159] vs 7.6% [eight of 105], respectively; P = .005).ConclusionCoronary artery plaques may be missed at low tube voltage coronary CT angiographic examination performed without a concomitant CAC scan.© RSNA, 2019Supplemental material is available for this article.See also the commentary by Truong in this issue.

Project description:To determine whether epicardial (EAT) and paracardial adipose tissue (PAT) volume and attenuation are associated with high-risk coronary plaque features.In subjects with suspected acute coronary syndrome (ACS) enrolled in the ROMICAT II trial, EAT and PAT volumes indexed to body surface area (BSA) and attenuation were measured on non-contrast coronary artery calcium score (CACS) CT. High-risk plaque features (napkin-ring sign, positive remodeling, low density plaque, spotty calcium) and stenosis were assessed on coronary CT angiography (CTA). The association of EAT and PAT volume and attenuation with high-risk plaque and whether this was independent of clinical risk assessment, CACS and significant coronary artery disease (CAD) was determined.Of 467 (mean 54 ± 8 yrs, 53% male) with CACS and CTA, 167 (36%) had high-risk plaque features. Those with high-risk plaque had significantly higher indexed EAT (median 59 (Q1-Q3:45-75) cc/m(2) vs. 49 (35-65) cc/m(2), p < 0.001) and PAT volume (median:51 (36-73) cc/m(2) vs. 33 (22-52) cc/m(2), p < 0.001). Higher indexed EAT volume was associated with high-risk plaque [univariate OR 1.02 (95%-CI:1.01-1.03) per cc/m(2) of EAT, p < 0.001], which remained significant [univariate OR 1.04 (95%-CI:1.00-1.08) per cc/m(2) of EAT, p = 0.040] after adjustment for risk factors, CACS, and stenosis ?50%. Higher indexed PAT volume was associated with high-risk plaque in univariate analysis [OR 1.02 (1.01-1.03) per cc/m(2) of PAT, p < 0.001], though this was not significant in multivariate analysis. At a threshold of >62.3 cc/m(2), EAT volume was associated with high-risk plaque [univariate OR 2.50 (95%-CI:1.69-3.72), p < 0.001)], which remained significant [OR 1.83 (95%-CI:1.10-3.05), p = 0.020] after adjustment. Subjects with high-risk plaque had lower mean attenuation EAT (-88.1 vs. -86.9 HU, p = 0.008) and PAT (-106 vs. -103 HU, p < 0.001), though this was not significant in multivariable analysis.Greater volumes of EAT are associated with high-risk plaque independent of risk factors, CACS and obstructive CAD. This observation supports possible local influence of EAT on development of high-risk coronary plaque.

Dataset Information

Influence of convolution filtering on coronary plaque attenuation values: observations in an ex vivo model of multislice computed tomography coronary angiography.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets