Stemmed implants improve stability in augmented constrained condylar knees.
Ontology highlight
ABSTRACT:
SUBMITTER: Rawlinson JJ
PROVIDER: S-EPMC2565014 | biostudies-other | 2008 Nov
REPOSITORIES: biostudies-other
Similar Datasets
Project description:There is debate in the literature whether rotating hinge knee (RHK) or constrained condylar knee (CCK) prostheses lead to better clinical outcomes and survival rates in patients undergoing revision total knee arthroplasty (RTKA). The purpose of this meta-analysis is to compare the survivorship and clinical outcomes of RHK and CCK prostheses. In this meta-analysis, we reviewed studies that evaluated pain and function scores, range of motion (ROM), complications, and survival rates in patients treated with RHK or CCK with short-term (<5 years) or midterm (5-10 years) follow-up. The survivorship was considered as the time to additional surgical intervention such as removal or revision of the components. A total of 12 studies (one randomized study and 11 non-randomized studies) met the inclusion criteria and were analyzed in detail. The proportion of the knees in which short-term (<5 years) survival rates (RHK, 83/95; CCK, 111/148; odds ratio [OR] 0.52; 95% CI, 0.24-1.11; P = 0.09) and midterm (5-10 years) survival rates (RHK, 104/128; CCK, 196/234; OR 1.05; 95% CI, 0.56-1.97; P = 0.88) were evaluated did not differ significantly between RHK and CCK prostheses. In addition, there were no significant differences in ROM (95% CI: -0.40 to 9.93; P = 0.07) and complication rates (95% CI: 0.66 to 2.49; P = 0.46). In contrast, CCK groups reported significantly better pain score (95% CI: 0.50 to 2.73; P = 0.005) and function score (95% CI: 0.01 to 2.00; P = 0.05) than RHK groups. This meta-analysis revealed that 87.4% of RHK and 75.0% of CCK prostheses survive at short-term (<5 years), while 81.3% of RHK and 83.8% of CCK prostheses survive at midterm (5-10 years). The differences in standardized mean pain and function scores we detected were likely to be imperceptible to patients and almost certainly below the minimum clinically important level, despite a significant difference in both groups. Based on the findings of the current meta-analysis, RHK prostheses continue to be an option in complex RTKA with reasonable midterm survivorship.
| S-EPMC6433230 | biostudies-literature
Project description:BackgroundInstability remains the most common complication after revision total hip arthroplasty (THA). The purpose of this study was to determine whether there was a difference in aseptic revision rates and survivorship between dual-mobility (DM) and constrained liners (CL) in revision THA.MethodsWe reviewed a consecutive series of 2432 revision THA patients from 2008 to 2019 at our institution and identified all patients who received either a CL or DM bearing. We compared demographics, comorbidities, indications, dislocations, and aseptic failure rates between the two groups. Bivariate and multivariate regression analyses were used to determine risk factors for failure, and a Kaplan-Meier survivorship analysis was performed with an aseptic re-revision as the endpoint.ResultsOf the 191 patients, 139 (72%) received a DM bearing, and 52 (28%) had a CL. At a mean follow-up of 14.3 months, there was no statistically significant difference in rates of dislocation (10.4% vs 14.0%, P = .667), aseptic revision (30.9% vs 46.2%, P = .073), or time to revision (3.78 vs 6 months, P = .565) between the two groups. The multivariate analysis revealed CL had no difference in aseptic re-revision rates when compared with DM (odds ratio 1.47, 95% confidence interval 0.84-2.52, P = .177). The survivorship analysis found no difference in aseptic failure between the groups at 12 months (P = .059).ConclusionBoth CL and DM bearings have high aseptic failure rates at intermediate term follow-up after revision THA. CL did show a higher risk of failure than DM bearings, but it was not statistically significant with the numbers available for this study. Further prospective studies are needed to determine the optimal treatment for recurrent instability.
| S-EPMC8661104 | biostudies-literature
Project description:Mandibular condylar cartilage (MCC) exhibits dual roles both articular cartilage and growth center. Of many growth factors, TGF-? has been implicated in the growth of articular cartilage including MCC. Recently, Asporin, decoy to TGF-?, was discovered and it blocks TGF-? signaling. Asporin is expressed in a variety of tissues including osteoarthritic articular cartilage, though there was no report of Asporin expression in MCC. In the present study, we investigated the temporal and spatial expression of Asporin in MCC. Gene expression profile of MCC and epiphyseal cartilage in tibia of 5 weeks old ICR mice were firstly compared with microarray analysis using the laser capture microdissected samples. Variance of gene expression was further confirmed by real-time RT-PCR and immunohistochemical staining at 1,3,10, and 20 weeks old. TGF-? and its signaling molecule, phosphorylated Smad-2/3 (p-Smad2/3), were also examined by immunohistochemical staining. Microarray analysis revealed that Asporin was highly expressed in MCC. Real-time RT-PCR analysis confirmed that the fibrous layer of MCC exhibited stable higher Asporin expression at any time points as compared to epiphyseal cartilage. This was also observed in immunohistochemical staining. Deeper layer in MCC augmented Asporin expression with age. Whereas, TGF-? was stably highly observed in the layer. The fibrous layer of MCC exhibited weak staining of p-Smad2/3, though the proliferating layer of MCC was strongly stained as compared to epiphyseal cartilage of tibia at early time point. Consistent with the increase of Asporin expression in the deeper layer of MCC, the intensity of p-Smad-2/3 staining was decreased with age. In conclusion, we discovered that Asporin was stably expressed at the fibrous layer of MCC, which makes it possible to manage both articular cartilage and growth center at the same time.
| S-EPMC5574816 | biostudies-literature
Project description:Despite the use of combination antiretroviral drugs for the treatment of HIV-1 infection, the emergence of drug resistance remains a problem. Resistance may be conferred either by a single mutation or a concerted set of mutations. The involvement of multiple mutations can arise due to interactions between sites in the amino acid sequence as a consequence of the need to maintain protein structure. To better understand the nature of such epistatic interactions, we reconstructed the ancestral sequences of HIV-1's Pol protein, and traced the evolutionary trajectories leading to mutations associated with drug resistance. Using contemporary and ancestral sequences we modelled the effects of mutations (i.e. amino acid replacements) on protein structure to understand the functional effects of residue changes. Although the majority of resistance-associated sequences tend to destabilise the protein structure, we find there is a general tendency for protein stability to decrease across HIV-1's evolutionary history. That a similar pattern is observed in the non-drug resistance lineages indicates that non-resistant mutations, for example, associated with escape from the immune response, also impacts on protein stability. Maintenance of optimal protein structure therefore represents a major constraining factor to the evolution of HIV-1.
| S-EPMC5570062 | biostudies-literature
Project description:BACKGROUND:The aim of the present study was to compare, in low-density polyurethane blocks, the primary implant stability values (micromobility) and removal torque values of three different implant geometries in two different bone densities representing the structure of the human posterior jaws. METHODS:A total of 60 implants were used in the present investigation: twenty implants for each of three groups (group A, group B, and group C), in both polyurethane 10 pcf and 20 pcf densities. The insertion torque, pull-out torque, and implant stability quotient (ISQ) values were obtained. RESULTS:No differences were found in the values of Group A and Group B implants. In both these groups, the insertion torques were quite low in the 10 pcf blocks. Better results were found in the 20 pcf blocks, which showed very good stability of the implants. The pull-out values were slightly lower than the insertion torque values. High ISQ values were found in Group A and B implants. Lower values were present in Group C implants. CONCLUSIONS:The present investigation evaluated implants with different geometries that are available on the market, and not experimental implants specifically created for the study. The authors aimed to simulate real clinical conditions (poor-density bone or immediate post-extraction implants) in which knowledge of dental implant features, which may be useful in increasing the primary stability, may help the oral surgeon during the surgery planning.
| S-EPMC7216137 | biostudies-literature
Project description:3D Printing (3DP) or additive manufacturing (AM) enables parts with complex shapes, design flexibility, and customization opportunities for defect specific patient-matched implants. 3DP or AM also offers a design platform that can be used to innovate novel alloys for application-specific compositional modifications. In medical applications, the biological response from a host tissue depends on a biomaterial's structural and compositional properties in the physiological environment. Application of 3DP can pave the way towards manufacturing innovative metallic implants, combining structural variations at different length scales and tailored compositions designed for specific biological responses. This study shows how 3DP can be used to design metallic alloys for orthopedic and dental applications with improved biocompatibility using in vitro and in vivo studies. Titanium (Ti) and its alloys are used extensively in biomedical devices due to excellent fatigue and corrosion resistance and good strength to weight ratio. However, Ti alloys' in vivo biological response is poor due to its bioinert surface. Different coatings and surface modification techniques are currently being used to improve the biocompatibility of Ti implants. We focused our efforts on improving Ti's biocompatibility via a combination of tantalum (Ta) chemistry in Ti, the addition of designed micro-porosity, and nanoscale surface modification to enhance both in vitro cytocompatibility and early stage in vivo osseointegration, which was studied in rat and rabbit distal femur models.
| S-EPMC8248902 | biostudies-literature
Project description:The aim of this study was to quantify the medial soft tissue contributions to stability following constrained condylar (CC) total knee arthroplasty (TKA) and determine whether a medial reconstruction could restore stability to a soft tissue-deficient, CC-TKA knee.Eight cadaveric knees were mounted in a robotic system and tested at 0°, 30°, 60°, and 90° of flexion with ±50 N anterior-posterior force, ±8 Nm varus-valgus, and ±5 Nm internal-external torque. The deep and superficial medial collateral ligaments (dMCL, sMCL) and posteromedial capsule (PMC) were transected and their relative contributions to stabilising the applied loads were quantified. After complete medial soft tissue transection, a reconstruction using a semitendinosus tendon graft was performed, and the effect on kinematic behaviour under equivocal conditions was measured.In the CC-TKA knee, the sMCL was the major medial restraint in anterior drawer, internal-external, and valgus rotation. No significant differences were found between the rotational laxities of the reconstructed knee to the pre-deficient state for the arc of motion examined. The relative contribution of the reconstruction was higher in valgus rotation at 60° than the sMCL; otherwise, the contribution of the reconstruction was similar to that of the sMCL.There is contention whether a CC-TKA can function with medial deficiency or more constraint is required. This work has shown that a CC-TKA may not provide enough stability with an absent sMCL. However, in such cases, combining the CC-TKA with a medial soft tissue reconstruction may be considered as an alternative to a hinged implant.
| S-EPMC5522503 | biostudies-other
Project description:Here we present the design of an engineered, elastin-like protein (ELP) that is chemically modified to enable stable coatings on the surfaces of titanium-based dental and orthopaedic implants by novel photocrosslinking and solution processing steps. The ELP includes an extended RGD sequence to confer bio-signaling and an elastin-like sequence for mechanical stability. ELP thin films were fabricated on cp-Ti and Ti6Al4V surfaces using scalable spin and dip coating processes with photoactive covalent crosslinking through a carbene insertion mechanism. The coatings withstood procedures mimicking dental screw and hip replacement stem implantations, a key metric for clinical translation. They promoted rapid adhesion of MG63 osteoblast-like cells, with over 80% adhesion after 24 h, compared to 38% adhesion on uncoated Ti6Al4V. MG63 cells produced significantly more mineralization on ELP coatings compared to uncoated Ti6Al4V. Human bone marrow mesenchymal stem cells (hMSCs) had an earlier increase in alkaline phosphatase activity, indicating more rapid osteogenic differentiation and mineral deposition on adhesive ELP coatings. Rat tibia and femur in vivo studies demonstrated that cell-adhesive ELP-coated implants increased bone-implant contact area and interfacial strength after one week. These results suggest that ELP coatings withstand surgical implantation and promote rapid osseointegration, enabling earlier implant loading and potentially preventing micromotion that leads to aseptic loosening and premature implant failure.
| S-EPMC4771523 | biostudies-literature
Project description:In a myocardial infarction, blood supply to the left ventricle is abrogated due to blockage of one of the coronary arteries, leading to ischemia, which further triggers the generation of reactive oxygen species (ROS). These sequential processes eventually lead to the death of contractile cells and affect the integrity of blood vessels, resulting in the formation of scar tissue. A new heart therapy comprised of cardiac implants encapsulated within an injectable extracellular matrix-gold nanoparticle composite hydrogel is reported. The particles on the collagenous fibers within the hydrogel promote fast transfer of electrical signal between cardiac cells, leading to the functional assembly of the cardiac implants. The composite hydrogel is shown to absorb reactive oxygen species in vitro and in vivo in mice ischemia reperfusion model. The reduction in ROS levels preserve cardiac tissue morphology and blood vessel integrity, reduce the scar size and the inflammatory response, and significantly prevent the deterioration of heart function.
| S-EPMC8693049 | biostudies-literature
Project description:BackgroundOsseodensification (OD) has shown to improve implant stability; however, the influences of implant design, dimensions, and surgical site characteristics are unknown.PurposeTo compare the insertion torque (IT) and temporal implant stability quotients (ISQ) of implants placed via OD or subtractive drilling (SD).Materials and methodsThis multicenter controlled clinical trial enrolled 56 patients, whom were in need of at least 2 implants (n = 150 implants). Patients were treated with narrow, regular, or wide implants and short, regular, or long implants in the anterior or posterior region of the maxilla or in the posterior region of the mandible. Osteotomies were performed following manufacturers recommendation. IT was recorded with a torque indicator. ISQ was recorded with resonance frequency analysis immediately after surgery, 3 and 6 weeks.ResultsData complied as a function of osteotomy indicated significantly higher IT for OD relative to SD. OD outperformed conventional SD for all pairwise comparisons of arches (maxilla and mandible) and areas operated (anterior and posterior), diameters and lengths of the implants, except for short implants. Overall, ISQ data also demonstrated significantly higher values for OD compared to SD regardless of the healing period. Relative to immediate readings, ISQ values significantly decreased at 3 weeks, returning to immediate levels at 6 weeks; however, ISQ values strictly remained above 68 throughout healing time for OD. Data as a function of arch operated and osteotomy, area operated and osteotomy, implant dimensions and osteotomy, also exhibited higher ISQ values for OD relative to SD on pairwise comparisons, except for short implants.ConclusionsOD demonstrated higher IT and temporal ISQ values relative to SD, irrespective of arch and area operated as well as implant design and dimension, with an exception for short implants. Future studies should focus on biomechanical parameters and bone level change evaluation after loading.
| S-EPMC8362055 | biostudies-literature