Gate-controlled magnetic properties of the magnetic semiconductor (Zn,Co)O.
Ontology highlight
ABSTRACT:
SUBMITTER: Lee HJ
PROVIDER: S-EPMC2719463 | biostudies-other | 2009 May
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Spinel ferrite magnetic nanoparticles have attracted considerable attention because of their high and flexible magnetic properties and biocompatibility. In this work, a set of magnetic nanoparticles of cobalt ferrite doped with zinc was synthesized via the eco-friendly sol-gel auto-combustion method. Obtained particles displayed a room-temperature ferromagnetic behavior with tuned by chemical composition values of saturation magnetization and coercivity. The maximal values of saturation magnetization ~74 Am2/kg were found in cobalt ferrite nanoparticles with a 15-35% molar fraction of cobalt replaced by zinc ions. At the same time, the coercivity exhibited a gradually diminishing trend from ~140 to ~5 mT whereas the concentration of zinc was increased from 0 to 100%. Consequently, nanoparticles produced by the proposed method possess highly adjustable magnetic properties to satisfy the requirement of a wide range of possible applications. Further prepared nanoparticles were tested with bacterial culture to display the influence of chemical composition and magnetic structure on nanoparticles-bacterial cell interaction.
| S-EPMC7664412 | biostudies-literature
Project description:An all-magnetic logic scheme has the advantages of being non-volatile and energy efficient over the conventional transistor based logic devices. In this work, we present a reconfigurable magnetic logic device which is capable of performing all basic logic operations in a single device. The device exploits the deterministic trajectory of domain wall (DW) in ferromagnetic asymmetric branch structure for obtaining different output combinations. The programmability of the device is achieved by using a current-controlled magnetic gate, which generates a local Oersted field. The field generated at the magnetic gate influences the trajectory of the DW within the structure by exploiting its inherent transverse charge distribution. DW transformation from vortex to transverse configuration close to the output branch plays a pivotal role in governing the DW chirality and hence the output. By simply switching the current direction through the magnetic gate, two universal logic gate functionalities can be obtained in this device. Using magnetic force microscopy imaging and magnetoresistance measurements, all basic logic functionalities are demonstrated.
| S-EPMC4738283 | biostudies-literature
Project description:An important research effort on the design of the magnetic particles is increasingly required to optimize the heat generation in biomedical applications, such as magnetic hyperthermia and heat-assisted drug release, considering the severe restrictions for the human body's exposure to an alternating magnetic field. Magnetic nanoparticles, considered in a broad sense as passive sensors, show the ability to detect an alternating magnetic field and to transduce it into a localized increase of temperature. In this context, the high biocompatibility, easy synthesis procedure and easily tunable magnetic properties of ferrite powders make them ideal candidates. In particular, the tailoring of their chemical composition and cation distribution allows the control of their magnetic properties, tuning them towards the strict demands of these heat-assisted biomedical applications. In this work, Co0.76Zn0.24Fe2O4, Li0.375Zn0.25Fe2.375O4 and ZnFe2O4 mixed-structure ferrite powders were synthesized in a 'dry gel' form by a sol-gel auto-combustion method. Their microstructural properties and cation distribution were obtained by X-ray diffraction characterization. Static and dynamic magnetic measurements were performed revealing the connection between the cation distribution and magnetic behavior. Particular attention was focused on the effect of Co2+ and Li+ ions on the magnetic properties at a magnetic field amplitude and the frequency values according to the practical demands of heat-assisted biomedical applications. In this context, the specific loss power (SLP) values were evaluated by ac-hysteresis losses and thermometric measurements at selected values of the dynamic magnetic fields.
| S-EPMC7181155 | biostudies-literature
Project description:Four Zn metal⁻organic frameworks (MOFs), {[Zn₂(2,6-ndc)₂(2-Pn)]·DMF}n (1), {[Zn₂(cca)₂(2-Pn)]·DMF}n (2), {[Zn₂(thdc)₂(2-Pn)]·3DMF}n (3), and {[Zn₂(1,4-ndc)₂(2-Pn)]·1.5DMF}n (4), were synthesized from zinc nitrate and N,N'-bis(pyridin-2-yl)benzene-1,4-diamine (2-Pn) with naphthalene-2,6-dicarboxylic acid (2,6-H₂ndc), 4-carboxycinnamic acid (H₂cca), 2,5-thiophenedicarboxylic acid (H₂thdc), and naphthalene-1,4-dicarboxylic acid (1,4-H₂ndc), respectively. MOFs 1⁻4 were all constructed from similar dinuclear paddlewheel {Zn₂(COO)₄} clusters and resulted in the formation of three kinds of uninodal 6-connected non-interpenetrated frameworks. MOFs 1 and 2 suit a topologic 4⁸·6⁷-net with 17.6% and 16.8% extra-framework voids, respectively, 3 adopts a pillared-layer open framework of 4⁸·6⁶·8-topology with sufficient free voids of 39.9%, and 4 features a pcu-type pillared-layer framework of 412·6³-topology with sufficient free voids of 30.9%. CO₂ sorption studies exhibited typical reversible type I isotherms with CO₂ uptakes of 55.1, 84.6, and 64.3 cm³ g-1 at 195 K and P/P₀ =1 for the activated materials 1', 2', and 4', respectively. The coverage-dependent isosteric heat of CO₂ adsorption (Qst) gave commonly decreased Qst traces with increasing CO₂ uptake for all the three materials and showed an adsorption enthalpy of 32.5 kJ mol-1 for 1', 38.3 kJ mol-1 for 2', and 23.5 kJ mol-1 for 4' at zero coverage.
| S-EPMC6401755 | biostudies-literature
Project description:In searching appropriate candidates of magnetic semiconductors compatible with mainstream Si technology for future spintronic devices, extensive attention has been focused on Mn-doped Ge magnetic semiconductors. Up to now, lack of reliable methods to obtain high-quality MnGe nanostructures with a desired shape and a good controllability has been a barrier to make these materials practically applicable for spintronic devices. Here, we report, for the first time, an innovative growth approach to produce self-assembled and coherent magnetic MnGe nanodot arrays with an excellent reproducibility. Magnetotransport experiments reveal that the nanodot arrays possess giant magneto-resistance associated with geometrical effects. The discovery of the MnGe nanodot arrays paves the way towards next-generation high-density magnetic memories and spintronic devices with low-power dissipation.
| S-EPMC3211181 | biostudies-literature
Project description:We utilized a thermal radiation method to synthesize semiconducting hollow ZnO nanoballoons and metal-semiconductor concentric solid Zn/ZnO nanospheres from metallic solid Zn nanospheres. The chemical properties, crystalline structures, and photoluminescence mechanisms for the metallic solid Zn nanospheres, semiconducting hollow ZnO nanoballoons, and metal-semiconductor concentric solid Zn/ZnO nanospheres are presented. The PL emissions of the metallic Zn solid nanospheres are mainly dependent on the electron transitions between the Fermi level (E(F)) and the 3d band, while those of the semiconducting hollow ZnO nanoballoons are ascribed to the near band edge (NBE) and deep level electron transitions. The PL emissions of the metal-semiconductor concentric solid Zn/ZnO nanospheres are attributed to the electron transitions across the metal-semiconductor junction, from the E(F) to the valence and 3d bands, and from the interface states to the valence band. All three nanostructures are excellent room-temperature light emitters.
| S-EPMC4225553 | biostudies-literature
Project description:A large spin-dependent and electric field-tunable magnetoresistance of a two-dimensional electron system is a key ingredient for the realization of many novel concepts for spin-based electronic devices. The low magnetoresistance observed during the last few decades in devices with lateral semiconducting transport channels between ferromagnetic source and drain contacts has been the main obstacle for realizing spin field effect transistor proposals. Here, we show both a large two-terminal magnetoresistance in a lateral spin valve device with a two-dimensional channel, with up to 80% resistance change, and tunability of the magnetoresistance by an electric gate. The enhanced magnetoresistance is due to finite electric field effects at the contact interface, which boost spin-to-charge conversion. The gating scheme that we use is based on switching between uni- and bidirectional spin diffusion, without resorting to spin-orbit coupling. Therefore, it can also be employed in materials with low spin-orbit coupling.
| S-EPMC5702618 | biostudies-literature
Project description:Determining the exact occupation sites of the doping ions in spinel ferrites is vital for tailoring and improving their magnetic properties. In this study, the distribution and occupation sites of cations in MgFe2O4 and Zn-doped MgFe2O4 ferrite are imaged by Cs-STEM. The experimental STEM images along [001], [011] and [111] orientations suggest that the divalent Mg2+ cations occupy all A sites, and the trivalent Fe3+ cations occupy all B sites in MgFe2O4 ferrite prepared by electrospinning, which is consistent with the normal spinel structure. We further clarify that the preferred sites of dopant Zn2+ ions are Fe3+ crystallographic sites in the Zn-doped MgFe2O4 ferrite nanofibers. Magnetic measurements show that Zn doping affects the spin states of the Fe3+, and the Fe3+-O2--Fe3+ super-exchange interaction leads to enhancements in the magnetization and reduction in the Curie temperature. Our work should contribute a significant step toward eventually realizing the practical application of doped spinel ferrites.
| S-EPMC8999915 | biostudies-literature
Project description:First principle calculations are employed to calculate the electronic and magnetic properties of Co doped MoS2 by considering a variety of defects including all the possible defect complexes. The results indicate that pristine MoS2 is nonmagnetic. The materials with the existence of S vacancy or Mo vacancy alone are non-magnetic either. Further calculation demonstrates that Co substitution at Mo site leads to spin polarized state. Two substitutional CoMo defects tend to cluster and result in the non-magnetic behaviour. However, the existence of Mo vacancies leads to uniform distribution of Co dopants and it is energy favourable with ferromagnetic coupling, resulting in an intrinsic diluted magnetic semiconductor.
| S-EPMC4823719 | biostudies-literature
Project description:Transistors with exfoliated two-dimensional (2D) materials on a SiO2/Si substrate have been applied and have been proven effective in a wide range of applications, such as circuits, memory, photodetectors, gas sensors, optical modulators, valleytronics, and spintronics. However, these devices usually suffer from limited gate control because of the thick SiO2 gate dielectric and the lack of reliable transfer method. We introduce a new back-gate transistor scheme fabricated on a novel Al2O3/ITO (indium tin oxide)/SiO2/Si "stack" substrate, which was engineered with distinguishable optical identification of exfoliated 2D materials. High-quality exfoliated 2D materials could be easily obtained and recognized on this stack. Two typical 2D materials, MoS2 and ReS2, were implemented to demonstrate the enhancement of gate controllability. Both transistors show excellent electrical characteristics, including steep subthreshold swing (62 mV dec-1 for MoS2 and 83 mV dec-1 for ReS2), high mobility (61.79 cm2 V-1 s-1 for MoS2 and 7.32 cm2 V-1 s-1 for ReS2), large on/off ratio (~107), and reasonable working gate bias (below 3 V). Moreover, MoS2 and ReS2 photodetectors fabricated on the basis of the scheme have impressively leading photoresponsivities of 4000 and 760 A W-1 in the depletion area, respectively, and both have exceeded 106 A W-1 in the accumulation area, which is the best ever obtained. This opens up a suite of applications of this novel platform in 2D materials research with increasing needs of enhanced gate control.
| S-EPMC5438220 | biostudies-literature