Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Rayleigh-Lamb wave propagation on a fractional order viscoelastic plate.

ABSTRACT: A previous study of the authors published in this journal focused on mechanical wave motion in a viscoelastic material representative of biological tissue [Meral et al., J. Acoust. Soc. Am. 126, 3278-3285 (2009)]. Compression, shear and surface wave motion in and on a viscoelastic halfspace excited by surface and sub-surface sources were considered. It was shown that a fractional order Voigt model, where the rate-dependent damping component that is dependent on the first derivative of time is replaced with a component that is dependent on a fractional derivative of time, resulted in closer agreement with experiment as compared with conventional (integer order) models, such as those of Voigt and Zener. In the present study, this analysis is extended to another configuration and wave type: out-of-plane response of a viscoelastic plate to harmonic anti-symmetric Lamb wave excitation. Theoretical solutions are compared with experimental measurements for a polymeric tissue mimicking phantom material. As in the previous configurations the fractional order modeling assumption improves the match between theory and experiment over a wider frequency range. Experimental complexities in the present study and the reliability of the different approaches for quantifying the shear viscoelastic properties of the material are discussed.

SUBMITTER: Meral FC

PROVIDER: S-EPMC3063611 | biostudies-other | 2011 Feb

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Fractional-Order Traveling Wave Approximations for a Fractional-Order Neural Field Model.

Project description:In this work, we establish a fractional-order neural field mathematical model with Caputo's fractional derivative temporal order α considering 0 < α < 2, to analyze the effect of fractional-order on cortical wave features observed preceding seizure termination. The importance of this incorporation relies on the theoretical framework established by fractional-order derivatives in which memory and hereditary properties of a system are considered. Employing Mittag-Leffler functions, we first obtain approximate fractional-order solutions that provide information about the initial wave dynamics in a fractional-order frame. We then consider the Adomian decomposition method to approximate pulse solutions in a wider range of orders and longer times. The former approach establishes a direct way to investigate the initial relationships between fractional-order and wave features, such as wave speed and wave width. In contrast, the latter approach displays wave propagation dynamics in different fractional orders for longer times. Using the previous two approaches, we establish approximate wave solutions with characteristics consistent with in vivo cortical waves preceding seizure termination. In our analysis, we find consistent differences in the initial effect of the fractional-order on the features of wave speed and wave width, depending on whether α <1 or α>1. Both cases can model the shape of cortical wave propagation for different fractional-orders at the cost of modifying the wave speed. Our results also show that the effect of fractional-order on wave width depends on the synaptic threshold and the synaptic connectivity extent. Fractional-order derivatives have been interpreted as the memory trace of the system. This property and the results of our analysis suggest that fractional-order derivatives and neuronal collective memory modify cortical wave features.

| S-EPMC8987931 | biostudies-literature

Nonlinear Rayleigh wave propagation in thermoelastic media in dual-phase-lag.

Project description:A model of generalized thermoelasticity within dual-phase-lag is used to investigate nonlinear Rayleigh wave propagation in a half-space of a transversely isotropic elastic material. It is assumed that the coefficient of heat conduction is temperature-dependent, a fact that plays an important role in the coupling behaviour analysis of thermoelastic and piezo-thermoelastic solids. Taking such a dependence into account becomes a necessity at higher temperatures and in nano-structures, when the material properties can no longer be considered as constants. Normal mode analysis is applied to find a particular solution to the problem under consideration. A concrete case is solved under prescribed boundary conditions and tentative values of the different material coefficients. The results are discussed to reveal the effect of temperature dependence of the heat conduction coefficient, as well as the thermal relaxation times, on nonlinear Rayleigh wave propagation. All quantities of practical interest are illustrated in two-and three-dimensional plots. The presented results may be useful in the detection of the second harmonic amplitudes through measurements related to the propagating heat wave.

| S-EPMC9731999 | biostudies-literature

Stress Wave Propagation in Viscoelastic-Plastic Rock-Like Materials.

Project description:Rock-like materials are composites that can be regarded as a mixture composed of elastic, plastic, and viscous components. They exhibit viscoelastic-plastic behavior under a high-strain-rate loading according to element model theory. This paper presents an analytical solution for stress wave propagation in viscoelastic-plastic rock-like materials under a high-strain-rate loading and verifies the solution through an experimental test. A constitutive equation of viscoelastic-plastic rock-like materials was first established, and then kinematic and kinetic equations were then solved to derive the analytic solution for stress wave propagation in viscoelastic-plastic rock-like materials. An experimental test using the SHPB (Split Hopkinson Pressure Bar) for a concrete specimen was conducted to obtain a stress-strain curve under a high-strain-rate loading. Inverse analysis based on differential evolution was conducted to estimate undetermined variables for constitutive equations. Finally, the relationship between the attenuation factor and the strain rate in viscoelastic-plastic rock-like materials was investigated. According to the results, the frequency of the stress wave, viscosity coefficient, modulus of elasticity, and density play dominant roles in the attenuation of the stress wave. The attenuation decreases with increasing strain rate, demonstrating strongly strain-dependent attenuation in viscoelastic-plastic rock-like materials.

| S-EPMC5503082 | biostudies-other

Interaction of Shear and Rayleigh-Lamb Waves with Notches and Voids in Plate Waveguides.

Project description:This paper investigates the interaction of different shear- and Rayleigh-Lamb-guided waves in plates with a discontinuity such as a notch or an internal void. The problem was solved numerically using a finite element model and by exploiting an analytical solution obtainable for the double sharp changes of the cross-section that served as a reference. We aimed to elucidate the relation between the size and shape of the discontinuity and the reflection and transmission coefficients of the scattered field. Different sizes and profiles of the discontinuity were considered, with the shapes ranging from step changes of the height to ellipses, both symmetric and nonsymmetric. Regimes related to low and high values of the product frequency multiplied by the height of the plate were investigated. These showed how the mode conversion was related to the symmetry between the incident mode and the discontinuity, and to the actual existence of multiple propagating modes. The analysis presented was motivated by the need to set up procedures that exploit propagating waves not only to detect the presence of a notch, but also to characterize its size and shape.

| S-EPMC5551884 | biostudies-other

Rayleigh wave propagation method for the characterization of a thin layer of biomaterials.

Project description:An experimental method based on Rayleigh wave propagation was developed for quantifying the frequency-dependent viscoelastic properties of a small volume of expensive biomaterials over a broad frequency range. Synthetic silicone rubber and gelatin materials were fabricated and tested to evaluate the proposed method. Planar harmonic Rayleigh waves at different frequencies, from 80 to 4000 Hz, were launched on the surface of a sample composed of a substrate with known material properties coated with a thin layer of the soft material to be characterized. A transfer function method was used to obtain the complex Rayleigh wavenumber. An inverse wave propagation problem was solved and a complex nonlinear dispersion equation was obtained. The complex shear and elastic moduli of the sample materials were then calculated through the numerical solution of the obtained dispersion equation using the measured wavenumbers. The results were in good agreement with those of a previous independent study. The proposed method was found to be reliable and cost effective for the measurement of viscoelastic properties of a thin layer of expensive biomaterials, such as phonosurgical biomaterials, over a wide frequency range.

| S-EPMC3689832 | biostudies-other

Lamb-Wave-Based Tomographic Imaging Techniques for Hole-Edge Corrosion Monitoring in Plate Structures.

Project description:This study presents a novel monitoring method for hole-edge corrosion damage in plate structures based on Lamb wave tomographic imaging techniques. An experimental procedure with a cross-hole layout using 16 piezoelectric transducers (PZTs) was designed. The A0 mode of the Lamb wave was selected, which is sensitive to thickness-loss damage. The iterative algebraic reconstruction technique (ART) method was used to locate and quantify the corrosion damage at the edge of the hole. Hydrofluoric acid with a concentration of 20% was used to corrode the specimen artificially. To estimate the effectiveness of the proposed method, the real corrosion damage was compared with the predicted corrosion damage based on the tomographic method. The results show that the Lamb-wave-based tomographic method can be used to monitor the hole-edge corrosion damage accurately.

| S-EPMC5457213 | biostudies-other

Phase velocities and attenuations of shear, Lamb, and Rayleigh waves in plate-like tissues submerged in a fluid (L).

Project description:In the past several decades, the fields of ultrasound and magnetic resonance elastography have shown promising results in noninvasive estimates of mechanical properties of soft tissues. These techniques often rely on measuring shear wave velocity due to an external or internal source of force and relating the velocity to viscoelasticity of the tissue. The mathematical relationship between the measured velocity and material properties of the myocardial wall, arteries, and other organs with non-negligible boundary conditions is often complicated and computationally expensive. A simple relationship between the Lamb-Rayleigh dispersion and the shear wave dispersion is derived for both the velocity and attenuation. The relationship shows that the shear wave velocity is around 20% higher than the Lamb-Rayleigh velocity and that the shear wave attenuation is about 20% lower than the Lamb-Rayleigh attenuation. Results of numerical simulations in the frequency range 0-500 Hz are presented.

| S-EPMC3253592 | biostudies-other

Temperature affected guided wave propagation in a composite plate complementing the Open Guided Waves Platform.

Project description:The influence of temperature is regarded as particularly important for a structural health monitoring system based on ultrasonic guided waves. Since the temperature effect causes stronger signal changes than a typical defect, the former must be addressed and compensated for reliable damage assessment. Development of new temperature compensation techniques as well as the comparison of existing algorithms require high-quality benchmark measurements. This paper investigates a carbon fiber reinforced plastic (CFRP) plate that was fully characterized in previous research in terms of stiffness tensor and guided wave propagation. The same CFRP plate is used here for the analysis of the temperature effect for a wide range of ultrasound frequencies and temperatures. The measurement data are a contribution to the Open Guided Waves (OGW) platform: http://www.open-guided-waves.de . The technical validation includes initial results on the analysis of phase velocity variations with temperature and exemplary damage detection results using state-of-the-art signal processing methods that aim to suppress the temperature effect.

| S-EPMC6778066 | biostudies-literature

Generalized Fractional Derivative Anisotropic Viscoelastic Characterization.

Project description:Isotropic linear and nonlinear fractional derivative constitutive relations are formulated and examined in terms of many parameter generalized Kelvin models and are analytically extended to cover general anisotropic homogeneous or non-homogeneous as well as functionally graded viscoelastic material behavior. Equivalent integral constitutive relations, which are computationally more powerful, are derived from fractional differential ones and the associated anisotropic temperature-moisture-degree-of-cure shift functions and reduced times are established. Approximate Fourier transform inversions for fractional derivative relations are formulated and their accuracy is evaluated. The efficacy of integer and fractional derivative constitutive relations is compared and the preferential use of either characterization in analyzing isotropic and anisotropic real materials must be examined on a case-by-case basis. Approximate protocols for curve fitting analytical fractional derivative results to experimental data are formulated and evaluated.

| S-EPMC5448942 | biostudies-other

New Caputo-Fabrizio fractional order

Project description:Fractional derivative has a memory and non-localization features that make it very useful in modelling epidemics’ transition. The kernel of Caputo-Fabrizio fractional derivative has many features such as non-singularity, non-locality and an exponential form. Therefore, it is preferred for modeling disease spreading systems. In this work, we suggest to formulate COVID-19 epidemic transmission via

| S-EPMC7458115 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data