Dynamic OCT measurement of corneal deformation by an air puff in normal and cross-linked corneas.
Ontology highlight
ABSTRACT:
SUBMITTER: Dorronsoro C
PROVIDER: S-EPMC3296536 | biostudies-other | 2012 Mar
REPOSITORIES: biostudies-other
Similar Datasets
Project description:ObjectiveTo validate a new method for reconstructing corneal biomechanical properties from air puff corneal deformation images using hydrogel polymer model corneas and porcine corneas.MethodsAir puff deformation imaging was performed on model eyes with artificial corneas made out of three different hydrogel materials with three different thicknesses and on porcine eyes, at constant intraocular pressure of 15 mmHg. The cornea air puff deformation was modeled using finite elements, and hyperelastic material parameters were determined through inverse modeling, minimizing the difference between the simulated and the measured central deformation amplitude and central-peripheral deformation ratio parameters. Uniaxial tensile tests were performed on the model cornea materials as well as on corneal strips, and the results were compared to stress-strain simulations assuming the reconstructed material parameters.ResultsThe measured and simulated spatial and temporal profiles of the air puff deformation tests were in good agreement (< 7% average discrepancy). The simulated stress-strain curves of the studied hydrogel corneal materials fitted well the experimental stress-strain curves from uniaxial extensiometry, particularly in the 0-0.4 range. Equivalent Young´s moduli of the reconstructed material properties from air-puff were 0.31, 0.58 and 0.48 MPa for the three polymer materials respectively which differed < 1% from those obtained from extensiometry. The simulations of the same material but different thickness resulted in similar reconstructed material properties. The air-puff reconstructed average equivalent Young´s modulus of the porcine corneas was 1.3 MPa, within 18% of that obtained from extensiometry.ConclusionsAir puff corneal deformation imaging with inverse finite element modeling can retrieve material properties of model hydrogel polymer corneas and real corneas, which are in good correspondence with those obtained from uniaxial extensiometry, suggesting that this is a promising technique to retrieve quantitative corneal biomechanical properties.
| S-EPMC5085055 | biostudies-literature
Project description:Introduction:The paper presents a commentary on the method of analysis of corneal vibrations occurring during eye pressure measurements with air-puff tonometers, for example, Corvis. The presented definition and measurement method allow for the analysis of image sequences of eye responses-cornea deformation. In particular, the outer corneal contour and sclera fragments are analysed, and 3D reconstruction is performed. Methods:On this basis, well-known parameters such as eyeball reaction or corneal response are determined. The next steps of analysis allow for automatic and reproducible separation of four different corneal vibrations. These vibrations are associated with (1) the location of the maximum of cornea deformation; (2) the cutoff area measured in relation to the cornea in a steady state; (3) the maximum of peaks occurring between applanations; and (4) the other characteristic points of the corneal contour. Results:The results obtained enable (1) automatic determination of the amplitude of vibrations; (2) determination of the frequency of vibrations; and (3) determination of the correlation between the selected types of vibrations. Conclusions:These are diagnostic features that can be directly applied clinically for new and archived data.
| S-EPMC5828335 | biostudies-other
Project description:PurposeTo determine if OCT angiography (OCTA)-derived vessel density measurements can extend the available dynamic range for detecting glaucoma compared with spectral-domain (SD) OCT-derived thickness measurements.DesignObservational, cross-sectional study.ParticipantsA total of 509 eyes from 38 healthy participants, 63 glaucoma suspects, and 193 glaucoma patients enrolled in the Diagnostic Innovations in Glaucoma Study.MethodsRelative vessel density and tissue thickness measurement floors of perifoveal vessel density (pfVD), circumpapillary capillary density (cpCD), circumpapillary retinal nerve fiber (cpRNFL) thickness, ganglion cell complex (GCC) thickness, and visual field (VF) mean deviation (MD) were investigated and compared with a previously reported linear change point model (CPM) and locally weighted scatterplot smoothing curves.Main outcome measuresEstimated vessel density and tissue thickness measurement floors and corresponding dynamic ranges.ResultsVisual field MD ranged from -30.1 to 2.8 decibels (dB). No measurement floor was found for pfVD, which continued to decrease constantly until very advanced disease. A true floor (i.e., slope of approximately 0 after observed CPM change point) was detected for cpRNFL thickness only. The post-CPM estimated floors were 49.5±2.6 μm for cpRNFL thickness, 70.7±1.0 μm for GCC thickness, and 31.2±1.1% for cpCD. Perifoveal vessel density reached the post-CPM estimated floor later in the disease (VF MD, -25.8±3.8 dB) than cpCD (VF MD, -19.3±2.4 dB), cpRNFL thickness (VF MD, -17.5±3.3 dB), and GCC thickness (VF MD, -13.9±1.8 dB; P < 0.001). The number of available measurement steps from normal values to the CPM estimated floor was greatest for cpRNFL thickness (8.9), followed by GCC thickness (7.4), cpCD (4.5), and pfVD (3.8).ConclusionsIn late-stage glaucoma, particularly when VF MD is worse than -14 dB, OCTA-measured pfVD is a promising tool for monitoring progression because it does not have a detectable measurement floor. However, the number of steps within the dynamic range of a parameter also needs to be considered. Although thickness parameters reached the floor earlier than OCTA-measured pfVD, there are more such steps with thickness than OCTA parameters.
| S-EPMC6589389 | biostudies-literature
Project description:BackgroundIndividuals who have failed one or more full thickness penetrating keratoplasties may be offered repeat corneal surgery using an artificial or donor cornea. An artificial or prosthetic cornea is known as a keratoprosthesis. Both donor and artificial corneal transplantations involve removal of the diseased and opaque recipient cornea (or the previously failed cornea) and replacement with another donor or prosthetic cornea.ObjectivesTo assess the effectiveness of artificial versus donor corneas in individuals who have had one or more failed donor corneal transplantations.Search methodsWe searched the Cochrane Central Register of Controlled Trials (CENTRAL) (which contains the Cochrane Eyes and Vision Trials Register) (2019, Issue 11); Ovid MEDLINE; Ovid Embase; LILACS (Latin American and Caribbean Health Sciences Literature database); ClinicalTrials.gov; and the World Health Organization (WHO) International Clinical Trials Registry Platform (ICTRP). We did not use any date or language restrictions in the electronic search for trials. We last searched the electronic databases on 4 November 2019.Selection criteriaTwo review authors independently assessed reports from the electronic searches to identify randomized controlled trials or controlled clinical trials. Any discrepancies were resolved by discussion or consultation.Data collection and analysisWe used standard methodological procedures expected by Cochrane. For discussion purposes, we summarized findings from relevant comparative case series. We performed no data synthesis.Main resultsWe did not identify any randomized controlled trials or controlled clinical trials comparing artificial corneas with donor corneas for repeat corneal transplantations.Authors' conclusionsThe optimal management for those individuals who have failed a conventional corneal transplantation is unknown. Currently, in some centers, artificial corneal devices are routinely recommended after just one graft failure, while in other centers, they are not recommended until after multiple graft failures, or not at all. To date, there have been no controlled trials comparing the visual outcomes and complications of artificial corneal devices (particularly the Boston type 1 keratoprosthesis, which is the most commonly implanted artificial corneal device) with repeat donor corneal transplantation, in order to guide surgeons and their patients. Such a trial is needed and would offer significant benefit to an ever-increasing pool of people with visual disability due to corneal opacification, most of whom are still in productive stages of their lives.
| S-EPMC7388900 | biostudies-literature
Project description:: Purpose: To improve numerical simulation of the non-contact tonometry test by using arbitrary Lagrangian-Eulerian deforming mesh in the coupling between computational fluid dynamics model of an air jet and finite element model of the human eye.MethodsComputational fluid dynamics model simulated impingement of the air puff and employed Spallart-Allmaras model to capture turbulence of the air jet. The time span of the jet was 30 ms and maximum Reynolds number was Re=2.3×104, with jet orifice diameter 2.4 mm and impinging distance 11 mm. The model of the human eye was analysed using finite element method with regional hyperelastic material variation and corneal patient-specific topography starting from stress-free configuration. The cornea was free to deform as a response to the air puff using an adaptive deforming mesh at every time step of the solution. Aqueous and vitreous humours were simulated as a fluid cavity filled with incompressible fluid with a density of 1000 kg/m3.ResultsUsing the adaptive deforming mesh in numerical simulation of the air puff test improved the traditional understanding of how pressure distribution on cornea changes with time of the test. There was a mean decrease in maximum pressure (at corneal apex) of 6.29 ± 2.2% and a development of negative pressure on a peripheral corneal region 2-4 mm away from cornea centre.ConclusionsThe study presented an improvement of numerical simulation of the air puff test, which will lead to more accurate intraocular pressure (IOP) and corneal material behaviour estimation. The parametric study showed that pressure of the air puff is different from one model to another, value-wise and distribution-wise, based on cornea biomechanical parameters.
| S-EPMC6982245 | biostudies-literature
Project description:ObjectiveTo assess the performance of convolutional neural networks (CNNs) for automated detection of keratoconus (KC) in standalone Scheimpflug-based dynamic corneal deformation videos.DesignRetrospective cohort study.ParticipantsWe retrospectively analyzed datasets with records of 734 nonconsecutive, refractive surgery candidates, and patients with unilateral or bilateral KC.MethodsWe first developed a video preprocessing pipeline to translate dynamic corneal deformation videos into 3-dimensional pseudoimage representations and then trained a CNN to directly identify KC from pseudoimages. We calculated the model's KC probability score cut-off and evaluated the performance by subjective and objective accuracy metrics using 2 independent datasets.Main outcome measuresArea under the receiver operating characteristics curve (AUC), accuracy, specificity, sensitivity, and KC probability score.ResultsThe model accuracy on the test subset was 0.89 with AUC of 0.94. Based on the external validation dataset, the AUC and accuracy of the CNN model for detecting KC were 0.93 and 0.88, respectively.ConclusionsOur deep learning-based approach was highly sensitive and specific in separating normal from keratoconic eyes using dynamic corneal deformation videos at levels that may prove useful in clinical practice.Financial disclosuresProprietary or commercial disclosure may be found in the Footnotes and Disclosures at the end of this article.
| S-EPMC10587634 | biostudies-literature
Project description:PurposeTo assess corneal microarchitecture and regional epithelial thickness profile in eyes with keratoconus, postoperative corneal ectasia (ectasia), and normal unoperated eyes (controls) using spectral-domain optical coherence tomography (SD-OCT).MethodsRegional corneal epithelial thickness profiles were measured with anterior segment SD-OCT (Optovue RTVue-100, Optovue Inc., Fremont, CA). Epithelial thickness was assessed at 21 points, 0.5 mm apart, across the central 6-mm of the corneal apex in the horizontal and vertical meridians.ResultsOne hundred twenty eyes were evaluated, including 49 eyes from 29 patients with keratoconus, 32 eyes from 16 patients with ectasia, and 39 eyes from 21 control patients. Average epithelial thickness at the corneal apex was 41.18 ± 6.47 μm (range: 30 to 51 μm) for keratoconus, 46.5 ± 6.72 μm for ectasia (range: 34 to 60 μm), and 50.45 ± 3.92 μm for controls (range: 42 to 55 μm). Apical epithelial thickness was significantly thinner in eyes with keratoconus (P < .0001) and ectasia (P = .0007) than in controls. Epithelial thickness ranges in all other areas varied widely for keratoconus (range: 21 to 101 μm) and ectasia (range: 30 to 82 μm) compared to controls (range: 43 to 64) (P = .0063).ConclusionSD-OCT demonstrated significant central and regional epithelial thickness profile differences between keratoconus, ectasia, and control eyes, with significant variability and unpredictability in ectatic eyes. This regional irregularity may necessitate direct epithelial thickness measurement for treatments where underlying stromal variations may be clinically relevant, including corneal collagen cross-linking or topography-guided ablations.
| S-EPMC4123636 | biostudies-literature
Project description:Application of the air-puff swept source optical coherence tomography (SS-OCT) instrument to determine the influence of viscoelasticity on the relation between overall the air-puff force and corneal apex displacement of porcine corneas ex vivo is demonstrated. Simultaneous recording of time-evolution of the tissue displacement and air pulse stimulus allows obtaining valuable information related in part to the mechanical properties of the cornea. A novel approach based on quantitative analysis of the corneal hysteresis of OCT data is presented. The corneal response to the air pulse is assessed for different well-controlled intraocular pressure (IOP) levels and for the progression of cross-linking-induced stiffness of the cornea. Micrometer resolution, fast acquisition and noncontact character of the air-puff SS-OCT measurements have potential to improve the in vivo assessment of mechanical properties of the human corneas.
| S-EPMC7065616 | biostudies-literature
Project description:The deformation measurement of a specular surface is of great importance during the quality inspection and installation of optical elements or wafers, especially those with large apertures. We propose a deflectometry method with speckle digital image correlation (DeSDIC) to realize the dynamic and high-accuracy measurement of the deformation on specular surfaces, with a simple system structure and robustness to noises and environmental vibrations. Random speckle pattern displayed on liquid crystal display is reflected by the original surface under test (SUT), and the distorted pattern is recorded by a camera. This originally distorted pattern is taken as the reference image, and the patterns captured afterwards are digitally correlated with the reference image to calculate the gradient change and deformation of the SUT. The theoretical relationships and an experimental one-step calibration scheme are proposed. Both static and dynamic deformations of a deformable mirror were experimentally measured to demonstrate the feasibility and accuracy of DeSDIC, which is comparable to phase-measuring deflectometry and interferometry.
| S-EPMC7085654 | biostudies-literature
Project description:This study was carried out to see the results of glycerol-preserved cornea (GPC) in emergency situation when fresh corneal tissue was not available. The aim was to study the outcome of corneal transplantation using GPC.This was a retrospective study. The medical records of all the patients were reviewed, who underwent keratoplasty using "GPC" during the period from October 2011 to December 2015. The indication of keratoplasty, duration of preservation of the GPC, and its outcome were analyzed. Descriptive statistics were applied.Out of the 222 penetrating keratoplasty (PKP) performed over the study period, the GPC was used in 34 patients (males = 31, 91.2%) aged 15-74 years. Therapeutic keratoplasty was performed in all cases in this cohort except one in which tectonic keratoplasty was done. The primary indication of PKP (91.2%) was infectious keratitis. Of these, 20 (64.5%) patients presented with perforated corneal ulcers. Post-PKP, ocular anatomy was preserved in 91.2%, and visual acuity of perception of light positive and accurate projection of rays in all the quadrants was obtained in 76.5% cases. Complications included glaucoma (n = 12, 35.1%), phthisis bulbi (n = 2, 5.9%), and graft reinfection and endophthalmitis after PKP (n = 1, 2.9%). The secondary procedure post-GPC and PKP were trabeculectomy with mitomycin C (n = 7, 58.3%) in patients not controlled on topical antiglaucoma medication. Optical keratoplasty was performed in (n = 3) 8.8% patients and triple procedure in (n = 2) 5.8% patients with good visual acuity postprocedure.Acellular GPCs are useful in emergency keratoplasty to avoid loss of vision and can save the eye.
| S-EPMC5549407 | biostudies-other