Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Enhanced gas sensing in pristine carbon nanotubes under continuous ultraviolet light illumination.

ABSTRACT: The advance of nanomaterials has opened new opportunities to develop ever more sensitive sensors owing to their high surface-to-volume ratio. However, it is challenging to achieve intrinsic sensitivities of nanomaterials for ultra-low level detections due to their vulnerability against contaminations. Here we show that despite considerable achievements in the last decade, continuous in situ cleaning of carbon nanotubes with ultraviolet light during gas sensing can still dramatically enhance their performance. For instance in nitric oxide detection, while sensitivity in air is improved two orders of magnitude, under controlled environment it reaches a detection limit of 590 parts-per-quadrillion (ppq) at room temperature. Furthermore, aiming for practical applications we illustrate how to address gas selectivity by introducing a gate bias. The concept of continuous in situ cleaning not only reveals the tremendous sensing potential of pristine carbon nanotubes but also more importantly it can be applied to other nanostructures.

SUBMITTER: Chen G

PROVIDER: S-EPMC3315270 | biostudies-other | 2012

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

The effect of light intensity on microalgae biofilm structures and physiology under continuous illumination.

Project description:The interest by biofilm-based microalgae technologies has increased lately due to productivity improvement, energy consumption reduction and easy harvesting. However, the effect of light, one key factor for system's operation, received less attention than for planktonic cultures. This work assessed the impact of Photon Flux Density (PFD) on Chlorella vulgaris biofilm dynamics (structure, physiology, activity). Microalgae biofilms were cultivated in a flow-cell system with PFD from 100 to 500 [Formula: see text]. In the first stage of biofilm development, uniform cell distribution was observed on the substratum exposed to 100 [Formula: see text] while cell clusters were formed under 500 [Formula: see text]. Though similar specific growth rate in exponential phase (ca. 0.3 [Formula: see text]) was obtained under all light intensities, biofilm cells at 500 [Formula: see text] seem to be ultimately photoinhibited (lower final cell density). Data confirm that Chlorella vulgaris showed a remarkable capability to cope with high light. This was marked for sessile cells at 300 [Formula: see text], which reduce very rapidly (in 2 days) their chlorophyll-a content, most probably to reduce photodamage, while maintaining a high final cell density. Besides cellular physiological adjustments, our data demonstrate that cellular spatial organization is light-dependent.

| S-EPMC10784318 | biostudies-literature

Defect-Induced Gas-Sensing Properties of a Flexible SnS Sensor under UV Illumination at Room Temperature.

Project description:Tin sulfide (SnS) is known for its effective gas-detecting ability at low temperatures. However, the development of a portable and flexible SnS sensor is hindered by its high resistance, low response, and long recovery time. Like other chalcogenides, the electronic and gas-sensing properties of SnS strongly depend on its surface defects. Therefore, understanding the effects of its surface defects on its electronic and gas-sensing properties is a key factor in developing low-temperature SnS gas sensors. Herein, using thin SnS films annealed at different temperatures, we demonstrate that SnS exhibits n-type semiconducting behavior upon the appearance of S vacancies. Furthermore, the presence of S vacancies imparts the n-type SnS sensor with better sensing performance under UV illumination at room temperature (25 °C) than that of a p-type SnS sensor. These results are thoroughly investigated using various experimental analysis techniques and theoretical calculations using density functional theory. In addition, n-type SnS deposited on a polyimide substrate can be used to fabricate high-stability flexible sensors, which can be further developed for real applications.

| S-EPMC7583859 | biostudies-literature

Surface-plasmon-enhanced ultraviolet emission of Au-decorated ZnO structures for gas sensing and photocatalytic devices.

Project description:Pure and Au-decorated sub-micrometer ZnO spheres were successfully grown on glass substrates by simple chemical bath deposition and photoreduction methods. The analysis of scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images, energy-dispersive X-ray spectroscopy (EDS), UV-vis absorption, and photoluminescence (PL) spectra results were used to verify the incorporation of plasmonic Au nanoparticles (NPs) on the ZnO film. Time-resolved photoluminescence (TRPL) spectra indicated that a surface plasmonic effect exists with a fast rate of charge transfer from Au nanoparticles to the sub-micrometer ZnO sphere, which suggested the strong possibility of the use of the material for the design of efficient catalytic devices. The NO2 sensing ability of as-deposited ZnO films was investigated with different gas concentrations at an optimized sensing temperature of 120 °C. Surface decoration of plasmonic Au nanoparticles provided an enhanced sensitivity (141 times) with improved response (?Res = 9 s) and recovery time (?Rec = 39 s). The enhanced gas sensing performance and photocatalytic degradation processes are suggested to be attributed to not only the surface plasmon resonance effect, but also due to a Schottky barrier between plasmonic Au and ZnO structures.

| S-EPMC5852533 | biostudies-other

EML1 (CNG-modulin) controls light sensitivity in darkness and under continuous illumination in zebrafish retinal cone photoreceptors.

Project description:The ligand sensitivity of cGMP-gated (CNG) ion channels in cone photoreceptors is modulated by CNG-modulin, a Ca(2+)-binding protein. We investigated the functional role of CNG-modulin in phototransduction in vivo in morpholino-mediated gene knockdown zebrafish. Through comparative genomic analysis, we identified the orthologue gene of CNG-modulin in zebrafish, eml1, an ancient gene present in the genome of all vertebrates sequenced to date. We compare the photoresponses of wild-type cones with those of cones that do not express the EML1 protein. In the absence of EML1, dark-adapted cones are ∼5.3-fold more light sensitive than wild-type cones. Previous qualitative studies in several nonmammalian species have shown that immediately after the onset of continuous illumination, cones are less light sensitive than in darkness, but sensitivity then recovers over the following 15-20 s. We characterize light sensitivity recovery in continuously illuminated wild-type zebrafish cones and demonstrate that sensitivity recovery does not occur in the absence of EML1.

| S-EPMC3818550 | biostudies-literature

Enhanced CO Sensing Performances of PdO/WO<sub>3</sub> Determined by Heterojunction Structure under Illumination.

Project description:The CO sensing performances and mechanism of PdO/WO3-based sensors were investigated by experiments and density functional theory calculations. The CO sensing performance can be significantly enhanced by decorating WO3 with PdO, which is attributed to the catalyst (chemical sensitization) and P-N junction (electronic effect). On the one hand, PdO is an excellent catalyst used to promote the adsorption of oxygen species. On the other hand, the constructed P-N junction structure between PdO and WO3 can facilitate the migration of carriers and suppress the recombination of electrons and holes, which promote the adsorption of more oxygen species. Furthermore, the calculation results verify that decorating WO3 with PdO can significantly enhance the CO sensing response by providing more adsorption sites available for oxygen species and make more electrons to transfer from CO to PdO/WO3 configuration. Moreover, the band gap energies of the WO3 sensor can be reduced by PdO decoration, and the light absorption range in the visible light region can be expanded. More photogenerated electron-hole pairs can be produced based on the P-N junction structure, which can promote the progress of electrochemical reactions. Thus, the PdO/WO3 material can be a promising candidate to detect CO, and it can effectively utilize the UV-visible light to destruct the CO contaminant.

| S-EPMC7659150 | biostudies-literature

A Gas Sensing Channel Composited with Pristine and Oxygen Plasma-Treated Graphene.

Project description:Oxygen plasma treatment has been reported as an effective way of improving the response of graphene gas sensors. In this work, a gas sensor based on a composite graphene channel with a layer of pristine graphene (G) at the bottom and an oxygen plasma-treated graphene (OP-G) as a covering layer was reported. The OP-G on top provided oxygen functional groups and serves as the gas molecule grippers, while the as-grown graphene beneath serves as a fast carrier transport path. Thus, the composite channel (OP-G/G) demonstrated significantly improved response in NH₃ gas sensing tests compared with the pristine G channel. Moreover, the OP-G/G channel showed faster response and recovering process than the OP-G channel. Since this kind of composite channel is fabricated from chemical vapor deposited graphene and patterned with standard photolithography, the device dimension was much smaller than a gas sensor fabricated from reduced graphene oxide and it is favorable for the integration of a large number of sensing units.

| S-EPMC6387050 | biostudies-literature

Gas Sensing with Iridium Oxide Nanoparticle Decorated Carbon Nanotubes.

Project description:The properties of multi-wall carbon nanotubes decorated with iridium oxide nanoparticles (IrOx-MWCNTs) are studied to detect harmful gases such as nitrogen dioxide and ammonia. IrOx nanoparticles were synthetized using a two-step method, based on a hydrolysis and acid condensation growth mechanism. The metal oxide nanoparticles obtained were employed for decorating the sidewalls of carbon nanotubes. Iridium-oxide nanoparticle decorated carbon nanotube material showed higher and more stable responses towards NH₃ and NO₂ than bare carbon nanotubes under different experimental conditions, establishing the optimal operating temperatures and estimating the limits of detection and quantification. Furthermore, the nanomaterials employed were studied using different morphological and compositional characterization techniques and a gas sensing mechanism is proposed.

| S-EPMC6339137 | biostudies-literature

NO gas sensing kinetics at room temperature under UV light irradiation of In2O3 nanostructures.

Project description:In2O3 nanostructure sensors were fabricated by arc-discharging a source composed of a graphite tube containing indium. The NO gas sensing properties, as well as the morphology, structure, and electrical properties, were examined at room temperature under UV light illumination. In particular, the response and recovery kinetics of the sensor at room temperature under various UV light intensities were studied. The maximum response signal was observed at an intermediate UV light intensity, which could be corroborated by a nano-size effect based on the conduction model of a resistive chemical nano sensor. The mechanism for the enhanced adsorption/desorption kinetics for NO in an air environment under UV light irradiation is discussed in detail. Furthermore, the general requirements of the sensor, including the stability, repeatability, and selectivity, are discussed.

| S-EPMC5054382 | biostudies-other

Construction of Embedded Heterostructured SrZrO3/Flower-like MoS2 with Enhanced Dye Photodegradation under Solar-Simulated Light Illumination.

Project description:SrZrO3/flower-like MoS2 composites with an embedded heterostructure were synthesized via a simple two-step hydrothermal method and their performance was evaluated by photodegradation of methylene blue (MB) under solar-simulated light irradiation. The sandwiched flower-like MoS2 with a high Mo(VI) ratio was adopted as the matrix, and SrZrO3 was grown between the MoS2 layers, forming an intense contact interface, which promotes the efficient separation and transport of photoinduced carriers. The enhanced photocatalytic degradation of 99.7% after 80 min of irradiation is exhibited over the MS5 sample (5 wt % SrZrO3 loading amount on the MoS2 matrix). Moreover, the ratio of Mo(VI) and the superoxide radical plays a crucial role in the photodegradation of MB, and the higher the ratio the better the performance. This work provided a strategy to design a new kind of photocatalyst for photocatalysis and indicated that MoS2 is preferably adopted as a matrix rather than as a loading component.

| S-EPMC7191852 | biostudies-literature

Conformal Self-Assembly of Nanospheres for Light-Enhanced Airtightness Monitoring and Room-Temperature Gas Sensing.

Project description:The fabrication of conformal nanostructures on microarchitectures is of great significance for diverse applications. Here a facile and universal method was developed for conformal self-assembly of nanospheres on various substrates including convex bumps and concave holes. Hydrophobic microarchitectures could be transferred into superhydrophilic ones using plasma treatment due to the formation of numerous hydroxyl groups. Because of superhydrophilicity, the nanosphere suspension spread on the microarchitectures quickly and conformal self-assembly of nanospheres can be realized. Besides, the feature size of the conformal nanospheres on the substrates could be further regulated by plasma treatment. After transferring two-dimensional tungsten disulfide sheets onto the conformal nanospheres, the periodic nanosphere array was demonstrated to be able to enhance the light harvesting of WS2. Based on this, a light-enhanced room-temperature gas sensor with a fast recovery speed (<35 s) and low detecting limit (500 ppb) was achieved. Moreover, the WS2-covered nanospheres on the microarchitectures were very sensitive to the changes in air pressure due to the formation of suspended sheets on the convex bumps and concave holes. A sensitive photoelectronic pressure sensor that was capable of detecting the airtightness of vacuum devices was developed using the WS2-decorated hierarchical architectures. This work provides a simple method for the fabrication of conformal nanospheres on arbitrary substrates, which is promising for three-dimensional microfabrication of multifunctional hierarchical microarchitectures for diverse applications, such as biomimetic compound eyes, smart wetting surfaces and photonic crystals.

| S-EPMC8308308 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data