Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Magnetic tunnel junction design margin exploration for self-reference sensing scheme.

ABSTRACT: This work investigates the magnetic tunnel junction (MTJ) design requirements for the application of nondestructive self-reference sensing scheme, a novel sensing scheme featuring high tolerance of process variations, fast sensing speed, and no impact on device reliability. Unlike the conventional sensing scheme that requires a large TMR ratio and the uniform antiparallel and parallel resistances for MTJs, the nondestructive self-reference sensing scheme is more sensitive to the roll-off slope of MTJ's R-I or R-V curve. Our purpose is to provide a guidance to facilitate MTJ design used in the nondestructive self-reference scheme. In this work, we comprehensively investigate and analyze the design matrix by considering MTJ device physical properties, such as bias voltage dependent conductance, spin torque, etc. The manuscript suggests the approaches to optimize MTJ design for better trade-off between device properties and circuit design.

SUBMITTER: Sun Z

PROVIDER: S-EPMC3316674 | biostudies-other | 2012 Apr

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Giant thermal spin-torque-assisted magnetic tunnel junction switching.

Project description:Spin-polarized charge currents induce magnetic tunnel junction (MTJ) switching by virtue of spin-transfer torque (STT). Recently, by taking advantage of the spin-dependent thermoelectric properties of magnetic materials, novel means of generating spin currents from temperature gradients, and their associated thermal-spin torques (TSTs), have been proposed, but so far these TSTs have not been large enough to influence MTJ switching. Here we demonstrate significant TSTs in MTJs by generating large temperature gradients across ultrathin MgO tunnel barriers that considerably affect the switching fields of the MTJ. We attribute the origin of the TST to an asymmetry of the tunneling conductance across the zero-bias voltage of the MTJ. Remarkably, we estimate through magneto-Seebeck voltage measurements that the charge currents that would be generated due to the temperature gradient would give rise to STT that is a thousand times too small to account for the changes in switching fields that we observe.

| S-EPMC4450437 | biostudies-literature

Double MgO-Based Perpendicular Magnetic Tunnel Junction for Artificial Neuron.

Project description:A perpendicular spin transfer torque (p-STT)-based neuron was developed for a spiking neural network (SNN). It demonstrated the integration behavior of a typical neuron in an SNN; in particular, the integration behavior corresponding to magnetic resistance change gradually increased with the input spike number. This behavior occurred when the spin electron directions between double Co2Fe6B2 free and pinned layers in the p-STT-based neuron were switched from parallel to antiparallel states. In addition, a neuron circuit for integrate-and-fire operation was proposed. Finally, pattern-recognition simulation was performed for a single-layer SNN.

| S-EPMC7204637 | biostudies-literature

Parallel fabrication of magnetic tunnel junction nanopillars by nanosphere lithography.

Project description:We present a new method for fabricating magnetic tunnel junction nanopillars that uses polystyrene nanospheres as a lithographic template. Unlike the common approaches, which depend on electron beam lithography to sequentially fabricate each nanopillar, this method is capable of patterning a large number of nanopillars simultaneously. Both random and ordered nanosphere patterns have been explored for fabricating high quality tunneling junctions with magnetoresistance in excess of 100%, employing ferromagnetic layers with both out-of-plane and in-plane easy axis. Novel voltage induced switching has been observed in these structures. This method provides a cost-effective way of rapidly fabricating a large number of tunnel junction nanopillars in parallel.

| S-EPMC3674430 | biostudies-literature

Perpendicular magnetic tunnel junction with a strained Mn-based nanolayer.

Project description:A magnetic tunnel junction with a perpendicular magnetic easy-axis (p-MTJ) is a key device for spintronic non-volatile magnetoresistive random access memory (MRAM). Co-Fe-B alloy-based p-MTJs are being developed, although they have a large magnetisation and medium perpendicular magnetic anisotropy (PMA), which make it difficult to apply them to a future dense MRAM. Here, we demonstrate a p-MTJ with an epitaxially strained MnGa nanolayer grown on a unique CoGa buffer material, which exhibits a large PMA of more than 5 Merg/cm(3) and magnetisation below 500 emu/cm(3); these properties are sufficient for application to advanced MRAM. Although the experimental tunnel magnetoresistance (TMR) ratio is still low, first principles calculations confirm that the strain-induced crystal lattice distortion modifies the band dispersion along the tetragonal c-axis into the fully spin-polarised state; thus, a huge TMR effect can be generated in this p-MTJ.

| S-EPMC4960582 | biostudies-literature

Full voltage manipulation of the resistance of a magnetic tunnel junction.

Project description:One of the motivations for multiferroics research is to find an energy-efficient solution to spintronic applications, such as the solely electrical control of magnetic tunnel junctions. Here, we integrate spintronics and multiferroics by depositing MgO-based magnetic tunnel junctions on ferroelectric substrate. We fabricate two pairs of electrodes on the ferroelectric substrate to generate localized strain by applying voltage. This voltage-generated localized strain has the ability to modify the magnetic anisotropy of the free layer effectively. By sequentially applying voltages to these two pairs of electrodes, we successively and unidirectionally rotate the magnetization of the free layer in the magnetic tunnel junctions to complete reversible 180° magnetization switching. Thus, we accomplish a giant nonvolatile solely electrical switchable high/low resistance in magnetic tunnel junctions at room temperature without the aid of a magnetic field. Our results are important for exploring voltage control of magnetism and low-power spintronic devices.

| S-EPMC6910833 | biostudies-literature

Failure Analysis in Magnetic Tunnel Junction Nanopillar with Interfacial Perpendicular Magnetic Anisotropy.

Project description:Magnetic tunnel junction nanopillar with interfacial perpendicular magnetic anisotropy (PMA-MTJ) becomes a promising candidate to build up spin transfer torque magnetic random access memory (STT-MRAM) for the next generation of non-volatile memory as it features low spin transfer switching current, fast speed, high scalability, and easy integration into conventional complementary metal oxide semiconductor (CMOS) circuits. However, this device suffers from a number of failure issues, such as large process variation and tunneling barrier breakdown. The large process variation is an intrinsic issue for PMA-MTJ as it is based on the interfacial effects between ultra-thin films with few layers of atoms; the tunneling barrier breakdown is due to the requirement of an ultra-thin tunneling barrier (e.g., <1 nm) to reduce the resistance area for the spin transfer torque switching in the nanopillar. These failure issues limit the research and development of STT-MRAM to widely achieve commercial products. In this paper, we give a full analysis of failure mechanisms for PMA-MTJ and present some eventual solutions from device fabrication to system level integration to optimize the failure issues.

| S-EPMC5456535 | biostudies-other

Double Pinned Perpendicular-Magnetic-Tunnel-Junction Spin-Valve Providing Multi-level Resistance States.

Project description:A new design for high density integration greater than gigabits of perpendicular-magnetic-tunnel-junction (p-MTJ) spin-valve, called the double pinned (i.e., bottom and top pinned structures) p-MTJ spin-valve achieved a multi-level memory-cell operation exhibiting four-level resistances. Three key magnetic properties, the anisotropy exchange field (Hex) of the bottom pinned structure, the coercivity (Hc) of the double free-layer, and the Hc of the top pinned structure mainly determined four-level resistances producing tunneling-magnetoresistance (TMR) ratios of 152.6%, 33.6%, and 166.5%. The three key-design concepts are: i) the bottom pinned structure with a sufficiently large Hex to avoid a write-error, ii) the Hc of the double free-layer (i.e., ~0.1 kOe) much less than the Hc of the top pinned structure (i.e., ~1.0 kOe), and iii) the top pinned structure providing different electron spin directions.

| S-EPMC6695488 | biostudies-literature

Effect of second-order magnetic anisotropy on nonlinearity of conductance in CoFeB/MgO/CoFeB magnetic tunnel junction for magnetic sensor devices.

Project description:We studied the effect of second-order magnetic anisotropy on the linear conductance output of magnetic tunnel junctions (MTJs) for magnetic-field-sensor applications. Experimentally, CoFeB/MgO/CoFeB-based MTJs were fabricated, and the nonlinearity, NL was evaluated for different thicknesses, t of the CoFeB free layer from the conductance. As increasing t from 1.5 to 2.0?nm, maximum NL, NLmax was found to decrease from 1.86 to 0.17% within the dynamic range, Hd?=?1.0?kOe. For understanding the origin of such NL behavior, a theoretical model based on the Slonczewski model was constructed, wherein the NL was demonstrated to be dependent on both the normalized second-order magnetic anisotropy field of Hk2/|Hkeff| and the normalized dynamic range of Hd/|Hkeff|. Here, Hkeff, Hk2, are the effective and second-order magnetic anisotropy field of the free layer in MTJ. Remarkably, experimental NLmax plotted as a function of Hk2/|Hkeff| and Hd/|Hkeff|, which were measured from FMR technique coincided with the predictions of our model. Based on these experiment and calculation, we conclude that Hk2 is the origin of NL and strongly influences its magnitude. This finding gives us a guideline for understanding NL and pioneers a new prospective for linear-output MTJ sensors to control sensing properties by Hk2.

| S-EPMC6864244 | biostudies-literature

Competing Anisotropy-Tunneling Correlation of the CoFeB/MgO Perpendicular Magnetic Tunnel Junction: An Electronic Approach.

Project description:We intensively investigate the physical principles regulating the tunneling magneto-resistance (TMR) and perpendicular magnetic anisotropy (PMA) of the CoFeB/MgO magnetic tunnel junction (MTJ) by means of angle-resolved x-ray magnetic spectroscopy. The angle-resolved capability was easily achieved, and it provided greater sensitivity to symmetry-related d-band occupation compared to traditional x-ray spectroscopy. This added degree of freedom successfully solved the unclear mechanism of this MTJ system renowned for controllable PMA and excellent TMR. As a surprising discovery, these two physical characteristics interact in a competing manner because of opposite band-filling preference in space-correlated symmetry of the 3d-orbital. An overlooked but harmful superparamagnetic phase resulting from magnetic inhomogeneity was also observed. This important finding reveals that simultaneously achieving fast switching and a high tunneling efficiency at an ultimate level is improbable for this MTJ system owing to its fundamental limit in physics. We suggest that the development of independent TMR and PMA mechanisms is critical towards a complementary relationship between the two physical characteristics, as well as the realization of superior performance, of this perpendicular MTJ. Furthermore, this study provides an easy approach to evaluate the futurity of any emerging spintronic candidates by electronically examining the relationship between their magnetic anisotropy and transport.

| S-EPMC4657009 | biostudies-literature

A high-speed single sideband generator using a magnetic tunnel junction spin torque nano-oscillator.

Project description:An important property of spin-torque nano-oscillators (STNOs) is their ability to produce a frequency modulated (FM) signal, which is very critical for communication applications. We here demonstrate a novel single sideband (SSB) modulation phenomenon using a magnetic tunnel junction (MTJ)-based STNO, which saves transmission bandwidth and in principle should minimize attenuation for wireless communication. Experimentally, lower single sidebands (LSSBs) have been successfully demonstrated over a wide range of modulation frequency, f m = 150 MHz-1 GHz. The observed LSSBs are determined by the intrinsic properties of the device, which can be modeled well by a nonlinear frequency and amplitude modulation formulation and reproduced in macrospin simulations. Moreover, our macrospin simulation results show that the range of modulation current and modulation frequency for generating SSBs can be controlled by the field-like torque and biasing conditions.

| S-EPMC5647387 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data