Large amplitude fluxional behaviour of elemental calcium under high pressure.
Ontology highlight
ABSTRACT:
SUBMITTER: Tse JS
PROVIDER: S-EPMC3330680 | biostudies-other | 2012
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Lithium, a prototypical simple metal under ambient conditions, has a surprisingly rich phase diagram under pressure, taking up several structures with reduced symmetry, low coordination numbers, and even semiconducting character with increasing density. Using first-principles calculations, we demonstrate that some predicted high-pressure phases of elemental Li also host topological electronic structures. Beginning at 80 GPa and coincident with a transition to the previously predicted Pbca phase, we find Li to be a Dirac nodal line semimetal. We further calculate that Li retains linearly dispersing energy bands near the Fermi energy in subsequent predicted higher-pressure phases and that it exhibits a Lifshitz transition between two Cmca phases at 220 GPa. The Fd[Formula: see text]m phase at 500 GPa forms buckled honeycomb layers that give rise to a Dirac crossing 1 eV below the Fermi energy. The well-isolated topological nodes near the Fermi level in these phases result from increasing p-orbital character with density at the Fermi level, itself a consequence of rising 1s core wavefunction overlap, and a preference for nonsymmorphic symmetries in the crystal structures favored at these pressures. Our results provide evidence that under pressure, bulk 3D materials with light elements, or even pure elemental systems, can undergo phase transitions hosting nontrivial topological phase transitions hosting nontrivial topological properties near the Fermi level with measurable consequences and that, through pressure, we can access these phases in elemental lithium.
| S-EPMC6511012 | biostudies-literature
Project description:The fluorescent Ca2+ sensitive dyes Fura Red (ratiometric) and Fluo-4 (non-ratiometric) are widely utilized for the optical assessment of Ca2+ fluctuations in vitro as well as in situ. The fluorescent behavior of these dyes is strongly depends on temperature, pH, ionic strength and pressure. It is crucial to understand the response of these dyes to pressure when applying calcium imaging technologies in the field of high pressure bioscience. Therefore, we use an optically accessible pressure vessel to pressurize physiological Ca2+-buffered solutions at different fixed concentrations of free Ca2+ (1 nM to 25.6 μM) and a specified dye concentration (12 μM) to pressures of 200 MPa, and record dye fluorescence intensity. Our results show that Fluo-4 fluorescence intensity is reduced by 31% per 100 MPa, the intensity of Fura Red is reduced by 10% per 100 MPa. The mean reaction volume for the dissociation of calcium from the dye molecules [Formula: see text] is determined to -17.8 ml mol-1 for Fluo-4 and -21.3 ml mol-1 for Fura Red. Additionally, a model is presented that is used to correct for pressure-dependent changes in pH and binding affinity of Ca2+ to EGTA, as well as to determine the influence of these changes on dye fluorescence.
| S-EPMC5072694 | biostudies-literature
Project description:Calcium carbonate which is extracted from the Earth in combination with other mineral impurities, is largely used in preparations for pediatric supplements. Elemental impurities in drug products pose toxicological concerns without therapeutic benefits. Thus, it is very urgent to assess the safety of chronic exposure to elements that may be present in trace amounts. In the present study, we developed high throughput ICP-MS method for the quantitative determination of 62 elemental impurities in high matric calcium carbonate samples and validated according to USP 233. Calcium carbonate preparations which state clearly used for child (including neonates, infants, toddlers and children) from 9 manufactures and two types of raw materials (light calcium carbonate and ground calcium carbonate) were investigated in terms of the content and variability of 62 elemental impurities. According to the results, ground calcium carbonate was more suitable to be used in pediatric preparations concerning elemental impurities. Parts of elemental impurities in CaCO3 preparations which are derived from the raw materials and the preparation process, may cause potential risks for children. These results indicate that it is necessary to establish a modern instrumental analysis method to evaluate and control elemental impurities in CaCO3 raw materials and preparations.
| S-EPMC8173443 | biostudies-literature
Project description:Viscoelastic shear properties of human vocal fold tissues were previously quantified by the shear moduli (G' and G?). Yet these small-strain linear measures were unable to describe any nonlinear tissue behavior. This study attempted to characterize the nonlinear viscoelastic response of the vocal fold lamina propria under large-amplitude oscillatory shear (LAOS) with a stress decomposition approach. Human vocal fold cover and vocal ligament specimens from eight subjects were subjected to LAOS rheometric testing with a simple-shear rheometer. The empirical total stress response was decomposed into elastic and viscous stress components, based on odd-integer harmonic decomposition approach with Fourier transform. Nonlinear viscoelastic measures derived from the decomposition were plotted in Pipkin space and as rheological fingerprints to observe the onset of nonlinearity and the type of nonlinear behavior. Results showed that both the vocal fold cover and the vocal ligament experienced intercycle strain softening, intracycle strain stiffening, as well as shear thinning both intercycle and intracycle. The vocal ligament appeared to demonstrate an earlier onset of nonlinearity at phonatory frequencies, and higher sensitivity to changes in frequency and strain. In summary, the stress decomposition approach provided much better insights into the nonlinear viscoelastic behavior of the vocal fold lamina propria than the traditional linear measures.
| S-EPMC5959278 | biostudies-literature
Project description:Characterization of high-amplitude propagating pressure waves (HAPWs or HAPCs) plays a key role in diagnosis of colon dysmotility using any type of colonic manometry. With the introduction of high-resolution manometry, more insight is gained into this most prominent propulsive motor pattern. Here, we use a water-perfused catheter with 84 sensors with intervals between measuring points of 1 cm throughout the colon, for 6-8 h, in 19 healthy subjects. The catheter contained a balloon to evoke distention. We explored as stimuli a meal, balloon distention, oral prucalopride, and bisacodyl injection, with a goal to optimally evoke HAPWs. We developed a quantitative measure of HAPW activity, the "HAPW Index." Our protocol elicited 290 HAPWs. 21% of HAPWs were confined to the proximal colon with an average amplitude of 75.3?±?3.3 mmHg and an average HAPW Index of 440?±?58 mmHg·m·s. 29% of HAPWs started in the proximal colon and ended in the transverse or descending colon, with an average amplitude of 87.9?±?3.1 mmHg and an average HAPW Index of 3,344?±?356 mmHg·m·s. Forty-nine percent of HAPWs started and ended in the transverse or descending colon with an average amplitude of 109.3?±?3.3 mmHg and an average HAPW Index of 2,071?±?195 mmHg·m·s. HAPWs with and without simultaneous pressure waves (SPWs) initiated the colo-anal reflex, often abolishing 100% of anal sphincter pressure. Rectal bisacodyl and proximal balloon distention were the most optimal stimuli to evoke HAPWs. These measures now allow for a confident diagnosis of abnormal motility in patients with colonic motor dysfunction.NEW & NOTEWORTHY High-amplitude propagating pressure waves (HAPWs) were characterized using 84 sensors throughout the entire colon in healthy subjects, taking note of site of origin, site of termination, amplitude, and velocity, and to identify optimal stimuli to evoke HAPWs. Three categories of HAPWs were identified, including the associated colo-anal reflex. Proximal balloon distention and rectal bisacodyl were recognized as reliable stimuli for evoking HAPWs, and a HAPW Index was devised to quantify this essential colonic motor pattern.
| S-EPMC7191456 | biostudies-literature
Project description:Experimental studies established that calcium undergoes several counterintuitive transitions under pressure: fcc --> bcc --> simple cubic --> Ca-IV --> Ca-V, and becomes a good superconductor in the simple cubic and higher-pressure phases. Here, using ab initio evolutionary simulations, we explore the behavior of Ca under pressure and find a number of new phases. Our structural sequence differs from the traditional picture for Ca, but is similar to that for Sr. The beta-tin (I4(1)/amd) structure, rather than simple cubic, is predicted to be the theoretical ground state at 0 K and 33-71 GPa. This structure can be represented as a large distortion of the simple cubic structure, just as the higher-pressure phases stable between 71 and 134 GPa. The structure of Ca-V, stable above 134 GPa, is a complex host-guest structure. According to our calculations, the predicted phases are superconductors with Tc increasing under pressure and reaching approximately 20 K at 120 GPa, in good agreement with experiment.
| S-EPMC2867850 | biostudies-other
Project description:BACKGROUND:Calcium-based and non-calcium-based phosphate binders have similar efficacy in the treatment of hyperphosphatemia; however, calcium-based binders may be associated with hypercalcemia, vascular calcification, and adynamic bone disease. SCOPE:A post hoc analysis was carried out of data from a 16-week, Phase IV study of patients with end-stage renal disease (ESRD) who switched to lanthanum carbonate monotherapy from baseline calcium acetate/calcium carbonate monotherapy. Of the intent-to-treat population (N=2520), 752 patients with recorded dose data for calcium acetate (n=551)/calcium carbonate (n=201) at baseline and lanthanum carbonate at week 16 were studied. Elemental calcium intake, serum phosphate, corrected serum calcium, and serum intact parathyroid hormone levels were analyzed. FINDINGS:Of the 551 patients with calcium acetate dose data, 271 (49.2%) had an elemental calcium intake of at least 1.5 g/day at baseline, and 142 (25.8%) had an intake of at least 2.0 g/day. Mean (95% confidence interval [CI]) serum phosphate levels were 6.1 (5.89, 6.21) mg/dL at baseline and 6.2 (6.04, 6.38) mg/dL at 16 weeks; mean (95% CI) corrected serum calcium levels were 9.3 (9.16, 9.44) mg/dL and 9.2 (9.06, 9.34) mg/dL, respectively. Of the 201 patients with calcium carbonate dose data, 117 (58.2%) had an elemental calcium intake of at least 1.5 g/day, and 76 (37.8%) had an intake of at least 2.0 g/day. Mean (95% CI) serum phosphate levels were 5.8 (5.52, 6.06) mg/dL at baseline and 5.8 (5.53, 6.05) mg/dL at week 16; mean (95% CI) corrected serum calcium levels were 9.7 (9.15, 10.25) mg/dL and 9.2 (9.06, 9.34) mg/dL, respectively. CONCLUSION:Calcium acetate/calcium carbonate phosphate binders, taken to control serum phosphate levels, may result in high levels of elemental calcium intake. This may lead to complications related to calcium balance.
| S-EPMC5279921 | biostudies-literature
Project description:High pressure can fundamentally alter the bonding patterns of chemical elements. Its effects include stimulating elements thought to be "inactive" to form unexpectedly stable compounds with unusual chemical and physical properties. Here, using an unbiased structure search method based on CALYPSO methodology and density functional total energy calculations, the phase stabilities and crystal structures of Li-Ar compounds are systematically investigated at high pressure up to 300?GPa. Two unexpected LimArn compounds (LiAr and Li3Ar) are predicted to be stable above 112?GPa and 119?GPa, respectively. A detailed analysis of the electronic structure of LiAr and Li3Ar shows that Ar in these compounds attracts electrons and thus behaves as an oxidizing agent. This is markedly different from the hitherto established chemical reactivity of Ar. Moreover, we predict that the P4/mmm phase of Li3Ar has a superconducting transition temperature of 17.6?K at 120?GPa.
| S-EPMC4652216 | biostudies-literature
Project description:Perovskite oxides ABO3 are important materials used as components in electronic devices. The highly compact crystal structure consists of a framework of corner-shared BO6 octahedra enclosing the A-site cations. Because of these structural features, forming a strong bond between A and B cations is highly unlikely and has not been reported in the literature. Here we report a pressure-induced first-order transition in PbRuO3 from a common orthorhombic phase (Pbnm) to an orthorhombic phase (Pbn21) at 32 GPa by using synchrotron X-ray diffraction. This transition has been further verified with resistivity measurements and Raman spectra under high pressure. In contrast to most well-studied perovskites under high pressure, the Pbn21 phase of PbRuO3 stabilized at high pressure is a polar perovskite. More interestingly, the Pbn21 phase has the most distorted octahedra and a shortest Pb-Ru bond length relative to the average Pb-Ru bond length that has ever been reported in a perovskite structure. We have also simulated the behavior of the PbRuO3 perovskite under high pressure by first principles calculations. The calculated critical pressure for the phase transition and evolution of lattice parameters under pressure match the experimental results quantitatively. Our calculations also reveal that the hybridization between a Ru:t2g orbital and an sp hybrid on Pb increases dramatically in the Pbnm phase under pressure. This pressure-induced change destabilizes the Pbnm phase to give a phase transition to the Pbn21 phase where electrons in the overlapping orbitals form bonding and antibonding states along the shortest Ru-Pb direction at P > Pc.
| S-EPMC3864321 | biostudies-literature
Project description:Because of its potentially broad industrial applications, a new synthesis of elastically stiffer and stronger glass has been a long standing interest in material science. Various chemical composition and synthesis condition have so far been extensively tested to meet this requirement. Since hydration of matter, in general, significantly reduces its stiffness, it has long been believed that an anhydrous condition has to be strictly complied in synthesis processes. Here we report elastic wave velocities of hydrous SiO2 glass determined in-situ up to ultrahigh-pressures of ~180 gigapascals, revealing that the elastic wave velocities of hydrous glass unexpectedly show the rapid increase with pressure and eventually become greater than those of anhydrous glass above ~15 gigapascals. Furthermore, anomalous change in the velocity gradient at ~100 gigapascals, probably caused by the change in Si-O coordination number from 6 to 6+, was also found at ~40 gigapascals lower pressure condition than that previously reported in anhydrous silica glass, implying that water is a highly effective impurity to make SiO2 glass much denser. This experimental discovery strongly indicates that hydration combined with pressurization is highly effective to synthesize elastically stiffer glass materials, which offers a new insight into the fabrication of industrially useful novel materials.
| S-EPMC6082893 | biostudies-other