Real-time video mosaicing with a high-resolution microendoscope.
Ontology highlight
ABSTRACT:
SUBMITTER: Bedard N
PROVIDER: S-EPMC3469983 | biostudies-other | 2012 Oct
REPOSITORIES: biostudies-other
Similar Datasets
Project description:The potential for improving the penetration depth of optical coherence tomography systems by using light sources with longer wavelengths has been known since the inception of the technique in the early 1990s. Nevertheless, the development of mid-infrared optical coherence tomography has long been challenged by the maturity and fidelity of optical components in this spectral region, resulting in slow acquisition, low sensitivity, and poor axial resolution. In this work, a mid-infrared spectral-domain optical coherence tomography system operating at a central wavelength of 4 µm and an axial resolution of 8.6 µm is demonstrated. The system produces two-dimensional cross-sectional images in real time enabled by a high-brightness 0.9- to 4.7-µm mid-infrared supercontinuum source with a pulse repetition rate of 1 MHz for illumination and broadband upconversion of more than 1-µm bandwidth from 3.58-4.63 µm to 820-865 nm, where a standard 800-nm spectrometer can be used for fast detection. The images produced by the mid-infrared system are compared with those delivered by a state-of-the-art ultra-high-resolution near-infrared optical coherence tomography system operating at 1.3 μm, and the potential applications and samples suited for this technology are discussed. In doing so, the first practical mid-infrared optical coherence tomography system is demonstrated, with immediate applications in real-time non-destructive testing for the inspection of defects and thickness measurements in samples that exhibit strong scattering at shorter wavelengths.
| S-EPMC6342823 | biostudies-literature
Project description:Drought in South Asia affect food and water security and pose challenges for millions of people. For policy-making, planning, and management of water resources at sub-basin or administrative levels, high-resolution datasets of precipitation and air temperature are required in near-real time. We develop a high-resolution (0.05°) bias-corrected precipitation and temperature data that can be used to monitor near real-time drought conditions over South Asia. Moreover, the dataset can be used to monitor climatic extremes (heat and cold waves, dry and wet anomalies) in South Asia. A distribution mapping method was applied to correct bias in precipitation and air temperature, which performed well compared to the other bias correction method based on linear scaling. Bias-corrected precipitation and temperature data were used to estimate Standardized precipitation index (SPI) and Standardized Precipitation Evapotranspiration Index (SPEI) to assess the historical and current drought conditions in South Asia. We evaluated drought severity and extent against the satellite-based Normalized Difference Vegetation Index (NDVI) anomalies and satellite-driven Drought Severity Index (DSI) at 0.05°. The bias-corrected high-resolution data can effectively capture observed drought conditions as shown by the satellite-based drought estimates. High resolution near real-time dataset can provide valuable information for decision-making at district and sub-basin levels.
| S-EPMC5625554 | biostudies-literature
Project description:Single-cell metabolic investigations are hampered by the absence of flexible tools to measure local partial pressure of O2 (pO2) at high spatial-temporal resolution. To this end, we developed an optical sensor capable of measuring local pericellular pO2 for subcellular resolution measurements with confocal imaging while simultaneously carrying out electrophysiological and/or chemo-mechanical single cell experiments. Here we present the OxySplot optrode, a ratiometric fluorescent O2-micro-sensor created by adsorbing O2-sensitive and O2-insensitive fluorophores onto micro-particles of silica. To protect the OxySplot optrode from the components and reactants of liquid environment without compromising access to O2, the micro-particles are coated with an optically clear silicone polymer (PDMS, polydimethylsiloxane). The PDMS coated OxySplot micro-particles are used alone or in a thin (~50 μm) PDMS layer of arbitrary shape referred to as the OxyMat. Additional top coatings on the OxyMat (e.g., fibronectin, laminin, polylysine, special photoactivatable surfaces etc.) facilitate adherence of cells. The OxySplots report the cellular pO2 and micro-gradients of pO2 without disrupting the flow of extracellular solutions or interfering with patch-clamp pipettes, mechanical attachments, and micro-superfusion. Since OxySplots and a cell can be imaged and spatially resolved, calibrated changes of pO2 and intracellular events can be imaged simultaneously. In addition, the response-time (t0.5 = 0.7 s, 0-160 mmHg) of OxySplots is ~100 times faster than amperometric Clark-type polarization microelectrodes. Two usage example of OxySplots with cardiomyocytes show (1) OxySplots measuring pericellular pO2 while tetramethylrhodamine methyl-ester (TMRM) was used to measure mitochondrial membrane potential (ΔΨm); and (2) OxySplots measuring pO2 during ischemia and reperfusion while rhod-2 was used to measure cytosolic [Ca2+]i levels simultaneously. The OxySplot/OxyMat optrode system provides an affordable and highly adaptable optical sensor system for monitoring pO2 with a diverse array of imaging systems, including high-speed, high-resolution confocal microscopes while physiological features are measured simultaneously.
| S-EPMC6613206 | biostudies-literature
Project description:RecA binds to single-stranded (ss) DNA to form a helical filament that catalyzes strand exchange with a homologous double-stranded (ds) DNA. The study of strand exchange in ensemble assays is limited by the diffusion limited homology search process, which masks the subsequent strand exchange reaction. We developed a single-molecule fluorescence assay with a few base-pair and millisecond resolution that can separate initial docking from the subsequent propagation of joint molecule formation. Our data suggest that propagation occurs in 3 bp increments with destabilization of the incoming dsDNA and concomitant pairing with the reference ssDNA. Unexpectedly, we discovered the formation of a dynamic complex between RecA and the displaced DNA that remains bound transiently after joint molecule formation. This finding could have important implications for the irreversibility of strand exchange. Our model for strand exchange links structural models of RecA to its catalytic function.
| S-EPMC3163668 | biostudies-literature
Project description: Not available
| S-EPMC6818086 | biostudies-literature
Project description:Single-pixel cameras capture images without the requirement for a multi-pixel sensor, enabling the use of state-of-the-art detector technologies and providing a potentially low-cost solution for sensing beyond the visible spectrum. One limitation of single-pixel cameras is the inherent trade-off between image resolution and frame rate, with current compressive (compressed) sensing techniques being unable to support real-time video. In this work we demonstrate the application of deep learning with convolutional auto-encoder networks to recover real-time 128?×?128 pixel video at 30 frames-per-second from a single-pixel camera sampling at a compression ratio of 2%. In addition, by training the network on a large database of images we are able to optimise the first layer of the convolutional network, equivalent to optimising the basis used for scanning the image intensities. This work develops and implements a novel approach to solving the inverse problem for single-pixel cameras efficiently and represents a significant step towards real-time operation of computational imagers. By learning from examples in a particular context, our approach opens up the possibility of high resolution for task-specific adaptation, with importance for applications in gas sensing, 3D imaging and metrology.
| S-EPMC5799195 | biostudies-literature
Project description:A novel real-time 2+1 three-dimensional(3D) measuring method based on bicolor grating video projection is proposed. Firstly, only two frames of bicolor gratings, in which the red channels are two sinusoidal fringes with a shifting phase of π/2 and the blue channels are the same background light equivalent to the DC component of the two sinusoidal fringes are encoded and arranged alternatively to synthesize into a repetitive bicolor grating video, While this video is projected onto the measured object, the real-time bicolor deformed pattern video can be recorded by using a color CMOS camera, and the bicolor deformed pattern sequence at different moments can be extracted by computer processing, so that the 2+1 algorithm can be used to accomplish real-time 3D measurement of moving object. Before measuring, we used the same method to design two sinusoidal fringes with a difference of π in their red channels, respectively, to calibrate the sensitivity ratio between the red and blue channels of the CMOS camera, which can effectively eliminate the chromaticity imbalance between R and B channels and reduce the color crosstalk. Experimental results and analysis confirm the feasibility and effectiveness of the proposed method. Because the proposed method needs a repetitive bicolor grating video synthesized with only two-frame bicolor gratings to be projected, the 3D measurement acquisition speed and real-time accuracy will be improved compared with the traditional 2+1 3D measuring method.
| S-EPMC8629212 | biostudies-literature
Project description:Objective. Atherosclerosis is a leading cause of mortality and morbidity. Optical endoscopy, ultrasound, and X-ray offer minimally invasive imaging assessments but have limited sensitivity for characterizing disease and therapeutic response. Magnetic resonance imaging (MRI) endoscopy is a newer idea employing tiny catheter-mounted detectors connected to the MRI scanner. It can see through vessel walls and provide soft-tissue sensitivity, but its slow imaging speed limits practical applications. Our goal is high-resolution MRI endoscopy with real-time imaging speeds comparable to existing modalities. Methods. Intravascular (3 mm) transmit-receive MRI endoscopes were fabricated for highly undersampled radial-projection MRI in a clinical 3-tesla MRI scanner. Iterative nonlinear reconstruction was accelerated using graphics processor units connected via a single ethernet cable to achieve true real-time endoscopy visualization at the scanner. MRI endoscopy was performed at 6-10 frames/sec and 200-300 μm resolution in human arterial specimens and porcine vessels ex vivo and in vivo and compared with fully sampled 0.3 frames/sec and three-dimensional reference scans using mutual information (MI) and structural similarity (3-SSIM) indices. Results. High-speed MRI endoscopy at 6-10 frames/sec was consistent with fully sampled MRI endoscopy and histology, with feasibility demonstrated in vivo in a large animal model. A 20-30-fold speed-up vs. 0.3 frames/sec reference scans came at a cost of ~7% in MI and ~45% in 3-SSIM, with reduced motion sensitivity. Conclusion. High-resolution MRI endoscopy can now be performed at frame rates comparable to those of X-ray and optical endoscopy and could provide an alternative to existing modalities, with MRI's advantages of soft-tissue sensitivity and lack of ionizing radiation.
| S-EPMC10521714 | biostudies-literature
Project description:Human infection with Chlamydophila (Chlamydia) psittaci can lead to psittacosis, a disease that occasionally results in severe pneumonia and other medical complications. C. psittaci is currently grouped into seven avian genotypes: A through F and E/B. Serological testing, outer membrane protein A (ompA) gene sequencing, and restriction fragment length polymorphism analysis are currently used for distinguishing these genotypes. Although accurate, these methods are time-consuming and require multiple confirmatory tests. By targeting the ompA gene, a real-time PCR assay has been developed to rapidly detect and genotype C. psittaci by light-upon-extension chemistry and high-resolution melt analysis. Using this assay, we screened 169 animal specimens; 98 were positive for C. psittaci (71.4% genotype A, 3.1% genotype B, 4.1% genotype E, and 21.4% unable to be typed). This test may provide insight into the distribution of each genotype among specific hosts and provide epidemiological and epizootiological data in human and mammalian/avian cases. This diagnostic assay may also have veterinary applications during chlamydial outbreaks, particularly with respect to identifying the sources and tracking the movements of a particular genotype when multiple animal facilities are affected.
| S-EPMC2620869 | biostudies-literature
Project description:Conventional tools for measurement of laser spectra (e.g. optical spectrum analysers) capture data averaged over a considerable time period. However, the generation spectrum of many laser types may involve spectral dynamics whose relatively fast time scale is determined by their cavity round trip period, calling for instrumentation featuring both high temporal and spectral resolution. Such real-time spectral characterisation becomes particularly challenging if the laser pulses are long, or they have continuous or quasi-continuous wave radiation components. Here we combine optical heterodyning with a technique of spatio-temporal intensity measurements that allows the characterisation of such complex sources. Fast, round-trip-resolved spectral dynamics of cavity-based systems in real-time are obtained, with temporal resolution of one cavity round trip and frequency resolution defined by its inverse (85 ns and 24 MHz respectively are demonstrated). We also show how under certain conditions for quasi-continuous wave sources, the spectral resolution could be further increased by a factor of 100 by direct extraction of phase information from the heterodyned dynamics or by using double time scales within the spectrogram approach.
| S-EPMC4794724 | biostudies-literature