Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Radiation-suppressed plasmonic open resonators designed by nonmagnetic transformation optics.

ABSTRACT: How to confine light energy associated with surface plasmon polaritons (SPPs) in a physical space with minimal radiation loss whereas creating maximum interacting section with surrounding environment is of particular interest in plasmonic optics. By virtue of transformation optics, we propose a design method of forming a polygonal surface-plasmonic resonator in fully open structures by applying the nonmagnetic affine transformation optics strategy. The radiation loss can be suppressed because SPPs that propagate in the designed open structures will be deceived as if they were propagating on a flat metal/dielectric interface without radiation. Because of the nonmagnetic nature of the transformation strategy, this design can be implemented with dielectric materials available in nature. An experimentally verifiable model is subsequently proposed for future experimental demonstration. Our design may find potential applications in omnidirectional sensing, light harvesting, energy storage and plasmonic lasing.

SUBMITTER: Xu H

PROVIDER: S-EPMC3491667 | biostudies-other | 2012

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Electrically tunable graphene plasmonic quasicrystal metasurfaces for transformation optics.

Project description:The past few years have witnessed tremendous achievements of transformation optics applied to metallic plasmonic systems. Due to the poor tunability of metals, however, the ultimate control over surface plasmons remains a challenge. Here we propose a new type of graphene plasmonic (GP) metasurfaces by shaping the dielectrics underneath monolayer graphene into specific photonic crystals. The radial and axial gradient-index (GRIN) lenses are implemented to demonstrate the feasibility and versatility of the proposal. It is found that the designed GP-GRIN lenses work perfectly well for focusing, collimating, and guiding the GP waves. Especially, they exhibit excellent performances in the THz regime as diverse as ultra-small focusing spot (λ0/60) and broadband electrical tunability. The proposed method offers potential opportunities in exploiting active transformational plasmonic elements operating at THz frequencies.

| S-EPMC4104397 | biostudies-literature

Dynamic coupling of plasmonic resonators.

Project description:We clarify the nature of dynamic coupling in plasmonic resonators and determine the dynamic coupling coefficient using a simple analytic model. We show that plasmonic resonators, such as subwavelength holes in a metal film which can be treated as bound charge oscillators, couple to each other through the retarded interaction of oscillating screened charges. Our dynamic coupling model offers, for the first time, a quantitative analytic description of the fundamental symmetric and anti-symmetric modes of coupled resonators which agrees with experimental results. Our model also reveals that plasmonic electromagnetically induced transparency arises in any coupled resonators of slightly unequal lengths, as confirmed by a rigorous numerical calculation and experiments.

| S-EPMC4766418 | biostudies-literature

Plasmonic Sensing with 3D Printed Optics.

Project description:Three-dimensional (3D) printing has undergone an exponential growth in popularity due to its revolutionary and near limitless manufacturing capabilities. Recent trends have seen this technology utilized across a variety of scientific disciplines, including the measurement sciences, but precise fabrication of optical components for high-performance biosensing has not yet been demonstrated. We report here 3D printing of high-quality, custom prisms by stereolithography that enable Kretschmann-configured plasmonic sensing of bacterial toxins. Simple benchtop polishing procedures render a smooth surface that supports propagation of surface plasmon polaritons with a deposited gold layer, which exhibit high bulk refractive index sensitivities and are capable of discriminating trace levels of cholera toxin on a supported lipid membrane interface. Further evidence of the flexibility of this manufacturing technique is demonstrated with printed prisms of varied geometries and in situ monitoring of nanoparticle growth by total internal reflection spectroscopy. This work represents the first example of 3D printed light-guiding sensing platforms and demonstrates the versatility and broad perspective of 3D printing in optical detection.

| S-EPMC6041471 | biostudies-literature

Revealing topology with transformation optics.

Project description:Symmetry deepens our insight into a physical system and its interplay with topology enables the discovery of topological phases. Symmetry analysis is conventionally performed either in the physical space of interest, or in the corresponding reciprocal space. Here we borrow the concept of virtual space from transformation optics to demonstrate how a certain class of symmetries can be visualised in a transformed, spectrally related coordinate space, illuminating the underlying topological transitions. By projecting a plasmonic system in a higher-dimensional virtual space onto a lower-dimensional system in real space, we show how transformation optics allows us to construct a topologically non-trivial system by inspecting its modes in the virtual space. Interestingly, we find that the topological invariant can be controlled via the singularities in the conformal mapping, enabling the intuitive engineering of edge states. The confluence of transformation optics and topology here can be generalized to other wave realms beyond photonics.

| S-EPMC8617177 | biostudies-literature

Engineering Near-Field SEIRA Enhancements in Plasmonic Resonators.

Project description:Engineering of the optical resonances in plasmonic resonators arrays is achieved by virtue of the intrinsic properties to the constituent structures such as composition, size and shape and by controlling the inter-resonator interactions by of virtue the array geometrical arrangement. The nanoscale confinement of the plasmonic field enhances light-matter interactions enabling, for instance, the surface enhanced infrared absorption (SEIRA) effect. However, the subwavelength confinement also poses an experimental challenge for discriminating the response stemming from the individual resonators and from the collective response in densely packed arrays. In this work, the photothermal induced resonance (PTIR) technique is leveraged to obtain nanoscale images and spectra of near-field SEIRA hot spots observed in isolated plasmonic resonators of different shapes and in selected resonators within closely packed plasmonic arrays informing on whether the interactions with neighboring resonators are beneficial or otherwise. Results are correlated with far-field spectra and theoretical calculations.

| S-EPMC4864996 | biostudies-literature

Strong vibrational coupling in room temperature plasmonic resonators.

Project description:Strong vibrational coupling has been realized in a variety of mechanical systems. However, there have been no experimental observations of strong coupling of the acoustic modes of plasmonic nanostructures, due to rapid energy dissipation in these systems. Here we realized strong vibrational coupling in ultra-high frequency plasmonic nanoresonators by increasing the vibrational quality factors by an order of magnitude. We achieved the highest frequency quality factor products of f × Q = 1.0 × 1013 Hz for the fundamental mechanical modes, which exceeds the value of 0.6 × 1013 Hz required for ground state cooling. Avoided crossing was observed between vibrational modes of two plasmonic nanoresonators with a coupling rate of g = 7.5 ± 1.2 GHz, an order of magnitude larger than the dissipation rates. The intermodal strong coupling was consistent with theoretical calculations using a coupled oscillator model. Our results enabled a platform for future observation and control of the quantum behavior of phonon modes in metallic nanoparticles.

| S-EPMC6449381 | biostudies-literature

Transformation optics with Fabry-Perot resonances.

Project description:Transformation optics is a powerful tool to design various novel devices, such as invisibility cloak. Fantastic effects from this technique are usually accompanied with singular mappings, resulting in challenging implementations and narrow bands of working frequencies. Here in this article, Fabry-Pérot resonances in materials of extreme anisotropy are used to design various transformation optical devices that are not only easy to realize but also work well for a set of resonant frequencies (multiple frequencies). As an example, a prototype of a cylindrical concentrator is fabricated for microwaves.

| S-EPMC4345524 | biostudies-literature

Record Purcell factors in ultracompact hybrid plasmonic ring resonators.

Project description:For integrated optical devices and traveling-wave resonators, realistic use of the superior wave-matter interaction offered by plasmonics is impeded by ohmic loss, which increases rapidly with mode volume reduction. In this work, we report composite hybrid plasmonic waveguides (CHPWs) that are not only capable of guiding subwavelength optical mode with long-range propagation but also unrestricted by stringent requirements in structural, material, or modal symmetry. In these asymmetric CHPWs, the versatility afforded by coupling dissimilar plasmonic modes provides improved fabrication tolerance and more degrees of device design optimization. Experimental realization of CHPWs demonstrates propagation loss and mode area of 0.03 dB/μm and 0.002 μm2, corresponding to the smallest combination among long-range plasmonic structures reported to date. CHPW ring resonators with 2.5-μm radius were realized with record Purcell factor compared with existing plasmonic and dielectric resonators of similar radii.

| S-EPMC6677546 | biostudies-literature

Controlling lightwave in Riemann space by merging geometrical optics with transformation optics.

Project description:In geometrical optical design, we only need to choose a suitable combination of lenses, prims, and mirrors to design an optical path. It is a simple and classic method for engineers. However, people cannot design fantastical optical devices such as invisibility cloaks, optical wormholes, etc. by geometrical optics. Transformation optics has paved the way for these complicated designs. However, controlling the propagation of light by transformation optics is not a direct design process like geometrical optics. In this study, a novel mixed method for optical design is proposed which has both the simplicity of classic geometrical optics and the flexibility of transformation optics. This mixed method overcomes the limitations of classic optical design; at the same time, it gives intuitive guidance for optical design by transformation optics. Three novel optical devices with fantastic functions have been designed using this mixed method, including asymmetrical transmissions, bidirectional focusing, and bidirectional cloaking. These optical devices cannot be implemented by classic optics alone and are also too complicated to be designed by pure transformation optics. Numerical simulations based on both the ray tracing method and full-wave simulation method are carried out to verify the performance of these three optical devices.

| S-EPMC5765110 | biostudies-literature

Defect-Tolerant Plasmonic Elliptical Resonators for Long-Range Energy Transfer.

Project description:Energy transfer allows energy to be moved from one quantum emitter to another. If this process follows the Förster mechanism, efficient transfer requires the emitters to be extremely close (<10 nm). To increase the transfer range, nanophotonic structures have been explored for photon- or plasmon-mediated energy transfer. Here, we fabricate high-quality silver plasmonic resonators to examine long-distance plasmon-mediated energy transfer. Specifically, we design elliptical resonators that allow energy transfer between the foci, which are separated by up to 10 ?m. The geometry of the ellipse guarantees that all plasmons emitted from one focus are collected and channeled through different paths to the other focus. Thus, energy can be transferred even if a micrometer-sized defect obstructs the direct path between the focal points. We characterize the spectral and spatial profiles of the resonator modes and show that these can be used to transfer energy between green- and red-emitting colloidal quantum dots printed with subwavelength accuracy using electrohydrodynamic nanodripping. Rate-equation modeling of the time-resolved fluorescence from the quantum dots further confirms the long-distance energy transfer.

| S-EPMC6774304 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data