Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Real-time full bandwidth measurement of spectral noise in supercontinuum generation.

ABSTRACT: The ability to measure real-time fluctuations of ultrashort pulses propagating in optical fiber has provided significant insights into fundamental dynamical effects such as modulation instability and the formation of frequency-shifting rogue wave solitons. We report here a detailed study of real-time fluctuations across the full bandwidth of a fiber supercontinuum which directly reveals the significant variation in measured noise statistics across the spectrum, and which allows us to study correlations between widely separated spectral components. For two different propagation distances corresponding to the onset phase of spectral broadening and the fully-developed supercontinuum, we measure real time noise across the supercontinuum bandwidth, and we quantify the supercontinuum noise using statistical higher-order moments and a frequency-dependent intensity correlation map. We identify correlated spectral regions within the supercontinuum associated with simultaneous sideband generation, as well as signatures of pump depletion and soliton-like pump dynamics. Experimental results are in excellent agreement with simulations.

SUBMITTER: Wetzel B

PROVIDER: S-EPMC3508454 | biostudies-other | 2012

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Real-time multispeckle spectral-temporal measurement unveils the complexity of spatiotemporal solitons.

Project description:The dynamics of three-dimensional (3D) dissipative solitons originated from spatiotemporal interactions share many common characteristics with other multi-dimensional phenomena. Unveiling the dynamics of 3D solitons thus permits new routes for tackling multidisciplinary nonlinear problems and exploiting their instabilities. However, this remains an open challenge, as they are multi-dimensional, stochastic and non-repeatable. Here, we report the real-time speckle-resolved spectral-temporal dynamics of a 3D soliton laser using a single-shot multispeckle spectral-temporal technology that leverages optical time division multiplexing and photonic time stretch. This technology enables the simultaneous observation on multiple speckle grains to provide long-lasting evolutionary dynamics on the planes of cavity time (t) - roundtrip and spectrum (λ) - roundtrip. Various non-repeatable speckly-diverse spectral-temporal dynamics are discovered in both the early and established stages of the 3D soliton formation.

| S-EPMC7782776 | biostudies-literature

In-amplifier and cascaded mid-infrared supercontinuum sources with low noise through gain-induced soliton spectral alignment.

Project description:The pulse-to-pulse relative intensity noise (RIN) of near-infrared (near-IR) in-amplifier supercontinuum (SC) sources and mid-IR cascaded SC sources was experimentally and numerically investigated and shown to have significantly lowered noise due to the fundamental effect of gain-induced soliton-spectral alignment. The mid-IR SC source is based on a near-IR in-amplifier SC pumping a cascade of thulium-doped and ZBLAN fibers. We demonstrate that the active thulium-doped fiber not only extend the spectrum, but also to significantly reduce the RIN by up to 22% in the long wavelength region above 2??m. Using numerical simulations, we demonstrate that the noise reduction is the result of an interplay between absorption-emission processes and nonlinear soliton dynamics leading to the soliton-spectral alignment. In the same way we show that the RIN of the near-IR in-amplifier SC source is already significantly reduced because the spectral broadening takes place in an active fiber that also introduces soliton-spectral alignment. We further show that the low noise properties are transferred to the subsequent fluoride SC, which has a RIN lower than 10% (5%) in a broad region from 1.1-3.6??m (1.4-3.0??m). The demonstrated low noise significantly improves the applicability of these broadband sources for mid-IR imaging and spectroscopy.

| S-EPMC7237674 | biostudies-literature

Noise and spectral stability of deep-UV gas-filled fiber-based supercontinuum sources driven by ultrafast mid-IR pulses.

Project description:Deep-UV (DUV) supercontinuum (SC) sources based on gas-filled hollow-core fibers constitute perhaps the most viable solution towards ultrafast, compact, and tunable lasers in the UV spectral region, which can even also extend into the mid-infrared (IR). Noise and spectral stability of such broadband sources are key parameters that define their true potential and suitability towards real-world applications. In order to investigate the spectral stability and noise levels in these fiber-based DUV sources, we generate an SC spectrum that extends from 180 nm (through phase-matched dispersive waves - DWs) to 4 μm by pumping an argon-filled hollow-core anti-resonant fiber at a mid-IR wavelength of 2.45 μm. We characterize the long-term stability of the source over several days and the pulse-to-pulse relative intensity noise (RIN) of the DW at 275 nm. The results indicate no sign of spectral degradation over 110 hours, but the RIN of the DW pulses at 275 nm is found to be as high as 33.3%. Numerical simulations were carried out to investigate the spectral distribution of the RIN and the results confirm the experimental measurements and that the poor noise performance is due to the high RIN of the mid-IR pump laser, which was hitherto not considered in numerical modelling of these sources. The results presented herein provide an important step towards an understanding of the noise mechanism underlying such complex light-gas nonlinear interactions and demonstrate the need for pump laser stabilization.

| S-EPMC7080841 | biostudies-literature

Next generation ligand binding assays-review of emerging real-time measurement technologies.

Project description:Over the last few years, numerous ligand binding assay technologies that utilize real-time measurement have been introduced; however, an assemblage and evaluation of these technologies has not previously been published. Herein, we describe six emerging real-time measurement technologies: Maverick™, MX96 SPR™, NanoDLSay™, AMMP®/ViBE®, SoPrano™, and two Lab-on-a-Chip (LoC) microfluidic devices. The development stage gate of these technologies ranges from pre-commercial to commercially available. Due to the novelty, the application and utility of some of the technologies regarding bioanalysis are likely to evolve but it is our hope that this review will provide insight into the direction the development of real-time measurement technologies is moving and the vision of those that are taking us there. Following the technology discussions, a comprehensive summary table is presented.

| S-EPMC4147046 | biostudies-literature

Shot-noise limited, supercontinuum-based optical coherence tomography.

Project description:We present the first demonstration of shot-noise limited supercontinuum-based spectral domain optical coherence tomography (SD-OCT) with an axial resolution of 5.9 μm at a center wavelength of 1370 nm. Current supercontinuum-based SD-OCT systems cannot be operated in the shot-noise limited detection regime because of severe pulse-to-pulse relative intensity noise of the supercontinuum source. To overcome this disadvantage, we have developed a low-noise supercontinuum source based on an all-normal dispersion (ANDi) fiber, pumped by a femtosecond laser. The noise performance of our 90 MHz ANDi fiber-based supercontinuum source is compared to that of two commercial sources operating at 80 and 320 MHz repetition rate. We show that the low-noise of the ANDi fiber-based supercontinuum source improves the OCT images significantly in terms of both higher contrast, better sensitivity, and improved penetration. From SD-OCT imaging of skin, retina, and multilayer stacks we conclude that supercontinuum-based SD-OCT can enter the domain of shot-noise limited detection.

| S-EPMC8239030 | biostudies-literature

Electro-optic comb based real time ultra-high sensitivity phase noise measurement system for high frequency microwaves.

Project description:Recent progress in ultra low phase noise microwave generation indispensably depends on ultra low phase noise characterization systems. However, achieving high sensitivity currently relies on time consuming averaging via cross correlation, which sometimes even underestimates phase noise because of residual correlations. Moreover, extending high sensitivity phase noise measurements to microwaves beyond 10?GHz is very difficult because of the lack of suitable high frequency microwave components. In this work, we introduce a delayed self-heterodyne method in conjunction with sensitivity enhancement via the use of higher order comb modes from an electro-optic comb for ultra-high sensitivity phase noise measurements. The method obviates the need for any high frequency RF components and has a frequency measurement range limited only by the bandwidth (100?GHz) of current electro-optic modulators. The estimated noise floor is as low as -133?dBc/Hz, -155?dBc/Hz, -170?dBc/Hz and -171?dBc/Hz without cross correlation at 1?kHz, 10?kHz, 100?kHz and 1?MHz Fourier offset frequency for a 10?GHz carrier, respectively. Moreover, since no cross correlation is necessary, RF oscillator phase noise can be directly suppressed via feedback up to 100?kHz frequency offset.

| S-EPMC5460219 | biostudies-literature

Real-Time Fluorescence Measurement for Droplet Generation and Signal Detection in a Cylindrical Tube.

Project description:This study provides an approach for generating droplets in a cylindrical tube. This creative design utilizes a single tube to generate droplets for the emulsion polymerase chain reaction (PCR). We fabricated the multi-layered tube and detected samples in 1 mm microchannel length for the minimum disposable material used for droplet signal analysis. In this research, we verify the validity of the non-planar droplet chip with a single driving pump by experimentally analyzing the light intensity of the liquids during droplet processing in real time. Experimental observation shows that droplet diameter from 150 to 285 μm was obtained by the cylindrical tube with different dispersed liquid and gas pressure settings. Average size of droplets decreased by approximately 37% as the dispersed phase liquids change at the same flow pressure of 50 mbar. In this study, the effects of the laser site, 6-carboxyfluorescein (6-FAM) dye buffer, DNA reagent, and driving pressure are analyzed directly by the signal recorded during droplet generation in the cylindrical tube. Finally, we have developed a real-time detection method to count exon 19 deletion mutations of epidermal growth factor receptor (EGFR) in a droplet using a cylindrical tube. Two digital droplet PCR methods were compared in measuring the copy numbers of EGFR with the same target DNA concentration of 105 copies/μL.

| S-EPMC9996802 | biostudies-literature

Real-time noise cancellation with deep learning

Project description:Biological measurements are often contaminated with large amounts of non-stationary noise which require effective noise reduction techniques. We present a new real-time deep learning algorithm which produces adaptively a signal opposing the noise so that destructive interference occurs. As a proof of concept, we demonstrate the algorithm’s performance by reducing electromyogram noise in electroencephalograms with the usage of a custom, flexible, 3D-printed, compound electrode. With this setup, an average of 4dB and a maximum of 10dB improvement of the signal-to-noise ratio of the EEG was achieved by removing wide band muscle noise. This concept has the potential to not only adaptively improve the signal-to-noise ratio of EEG but can be applied to a wide range of biological, industrial and consumer applications such as industrial sensing or noise cancelling headphones.

| S-EPMC9678292 | biostudies-literature

Real-time full field laser Doppler imaging.

Project description:We present a full field laser Doppler imaging instrument, which enables real-time in vivo assessment of blood flow in dermal tissue and skin. This instrument monitors the blood perfusion in an area of about 50 cm(2) with 480 × 480 pixels per frame at a rate of 12-14 frames per second. Smaller frames can be monitored at much higher frame rates. We recorded the microcirculation in healthy skin before, during and after arterial occlusion. In initial clinical case studies, we imaged the microcirculation in burned skin and monitored the recovery of blood flow in a skin flap during reconstructive surgery indicating the high potential of LDI for clinical applications. Small animal imaging in mouse ears clearly revealed the network of blood vessels and the corresponding blood perfusion.

| S-EPMC3114216 | biostudies-other

GaAs-chip-based mid-infrared supercontinuum generation.

Project description:The mid-infrared spectral region opens up new possibilities for applications such as molecular spectroscopy with high spatial and frequency resolution. For example, the mid-infrared light provided by synchrotron sources has helped for early diagnosis of several pathologies. However, alternative light sources at the table-top scale would enable better access to these state-of-the-art characterizations, eventually speeding up research in biology and medicine. Mid-infrared supercontinuum generation in highly nonlinear waveguides pumped by compact fiber lasers represents an appealing alternative to synchrotrons. Here, we introduce orientation-patterned gallium arsenide waveguides as a new versatile platform for mid-infrared supercontinuum generation. Waveguides and fiber-based pump lasers are optimized in tandem to allow for the group velocities of the signal and the idler waves to match near the degeneracy point. This configuration exacerbates supercontinuum generation from 4 to 9 µm when waveguides are pumped at 2750 nm with few-nanojoule energy pulses. The brightness of the novel mid-infrared source exceeds that of the third-generation synchrotron source by a factor of 20. We also show that the nonlinear dynamics is strongly influenced by the choice of waveguide and laser parameters, thus offering an additional degree of freedom in tailoring the spectral profile of the generated light. Such an approach then opens new paths for high-brightness mid-infrared laser sources development for high-resolution spectroscopy and imaging. Furthermore, thanks to the excellent mechanical and thermal properties of the waveguide material, further power scaling seems feasible, allowing for the generation of watt-level ultra-broad frequency combs in the mid-infrared.

| S-EPMC10582246 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data