Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Layered plasmonic cloaks to tailor the optical scattering at the nanoscale.

ABSTRACT: We discuss the rich scattering features offered by thin and thick plasmonic layers covering dielectric nanoparticles and their potential optical applications. The frequency position of scattering dips and peaks may be controlled to a large degree using plasmonic layers, which may dramatically vary the total scattering signature in the frequency range of interest. We show that complex and exotic spectra may be obtained using a single composite nanosphere, including dipole-dipole Fano resonances and electromagnetic induced transparency effects. The described phenomena are observable at any angle of observation, in the total scattering cross section and for realistic plasmonic materials, since they are based on purely dipolar fields. Enhanced field amplitudes are associated with these anomalous scattering features, which may be used to efficiently boost weak optical nonlinear effects. Exciting applications of these nanostructures are envisioned, such as efficient and tunable sensors, all-optical switches and memories, optical tagging and biomolecular imaging.

SUBMITTER: Monticone F

PROVIDER: S-EPMC3512086 | biostudies-other | 2012

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Optimizing the nanoscale quantitative optical imaging of subfield scattering targets.

Project description:The full 3-D scattered field above finite sets of features has been shown to contain a continuum of spatial frequency information and, with novel optical microscopy techniques and electromagnetic modeling, deep-subwavelength geometrical parameters can be determined. Similarly, by using simulations, scattering geometries and experimental conditions can be established to tailor scattered fields that yield lower parametric uncertainties while decreasing the number of measurements and the area of such finite sets of features. Such optimized conditions are reported through quantitative optical imaging in 193 nm scatterfield microscopy using feature sets up to four times smaller in area than state-of-the-art critical dimension targets.

| S-EPMC5815523 | biostudies-literature

Nanoscale on-chip all-optical logic parity checker in integrated plasmonic circuits in optical communication range.

Project description:The nanoscale chip-integrated all-optical logic parity checker is an essential core component for optical computing systems and ultrahigh-speed ultrawide-band information processing chips. Unfortunately, little experimental progress has been made in development of these devices to date because of material bottleneck limitations and a lack of effective realization mechanisms. Here, we report a simple and efficient strategy for direct realization of nanoscale chip-integrated all-optical logic parity checkers in integrated plasmonic circuits in the optical communication range. The proposed parity checker consists of two-level cascaded exclusive-OR (XOR) logic gates that are realized based on the linear interference of surface plasmon polaritons propagating in the plasmonic waveguides. The parity of the number of logic 1s in the incident four-bit logic signals is determined, and the output signal is given the logic state 0 for even parity (and 1 for odd parity). Compared with previous reports, the overall device feature size is reduced by more than two orders of magnitude, while ultralow energy consumption is maintained. This work raises the possibility of realization of large-scale integrated information processing chips based on integrated plasmonic circuits, and also provides a way to overcome the intrinsic limitations of serious surface plasmon polariton losses for on-chip integration applications.

| S-EPMC4829911 | biostudies-literature

Plasmonic Forward Scattering Effect in Organic Solar Cells: A Powerful Optical Engineering Method

Project description:In this report, plasmonic effects in organic photovoltaic cells (OPVs) are systematically analyzed using size-controlled silver nanoparticles (AgNPs, diameter: 10 ~ 100?nm), which were incorporated into the anodic buffer layer, poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS). The optical properties of AgNPs tuned by size considerably influence the performance levels of devices. The power conversion efficiency (PCE) was increased from 6.4% to 7.6% in poly[N-9-hepta-decanyl-2,7-carbazole-alt-5,5-(4,7-di-2-thienyl-2,1,3-benzothiadiazole)] (PCDTBT):[6,6]-phenyl C71-butyric acid methyl ester (PC70BM) based-OPVs and from 7.9% to 8.6% in polythieno[3,4-b]thiophene/benzodithiophene (PTB7):PC70BM based-OPVs upon embedding the AgNPs. The external quantum efficiency (EQE) was significantly enhanced by the absorption enhancement due to the plasmonic scattering effect. Finally, we verified the origin of the size-dependent plasmonic forwarding scattering effect of the AgNPs by visualizing the scattering field with near-field optical microscopy (NSOM) and through analytic optical simulations.

| S-EPMC3635054 | biostudies-literature

Hybrid plasmonic Au-TiN vertically aligned nanocomposites: a nanoscale platform towards tunable optical sensing.

Project description:Tunable plasmonic structure at the nanometer scale presents enormous opportunities for various photonic devices. In this work, we present a hybrid plasmonic thin film platform: i.e., a vertically aligned Au nanopillar array grown inside a TiN matrix with controllable Au pillar density. Compared to single phase plasmonic materials, the presented tunable hybrid nanostructures attain optical flexibility including gradual tuning and anisotropic behavior of the complex dielectric function, resonant peak shifting and change of surface plasmon resonances (SPRs) in the UV-visible range, all confirmed by numerical simulations. The tailorable hybrid platform also demonstrates enhanced surface plasmon Raman response for Fourier-transform infrared spectroscopy (FTIR) and photoluminescence (PL) measurements, and presents great potentials as designable hybrid platforms for tunable optical-based chemical sensing applications.

| S-EPMC9473282 | biostudies-literature

Nanoscale Hydration in Layered Manganese Oxides.

Project description:Birnessite is a layered MnO2 mineral capable of intercalating nanometric water films in its bulk. With its variable distributions of Mn oxidation states (MnIV, MnIII, and MnII), cationic vacancies, and interlayer cationic populations, birnessite plays key roles in catalysis, energy storage solutions, and environmental (geo)chemistry. We here report the molecular controls driving the nanoscale intercalation of water in potassium-exchanged birnessite nanoparticles. From microgravimetry, vibrational spectroscopy, and X-ray diffraction, we find that birnessite intercalates no more than one monolayer of water per interlayer when exposed to water vapor at 25 °C, even near the dew point. Molecular dynamics showed that a single monolayer is an energetically favorable hydration state that consists of 1.33 water molecules per unit cell. This monolayer is stabilized by concerted potassium-water and direct water-birnessite interactions, and involves negligible water-water interactions. Using our composite adsorption-condensation-intercalation model, we predicted humidity-dependent water loadings in terms of water intercalated in the internal and adsorbed at external basal faces, the proportions of which vary with particle size. The model also accounts for additional populations condensed on and between particles. By describing the nanoscale hydration of birnessite, our work secures a path for understanding the water-driven catalytic chemistry that this important layered manganese oxide mineral can host in natural and technological settings.

| S-EPMC7880569 | biostudies-literature

Plasmonic bound states in the continuum to tailor light-matter coupling.

Project description:Plasmon resonances play a pivotal role in enhancing light-matter interactions in nanophotonics, but their low-quality factors have hindered applications demanding high spectral selectivity. Here, we demonstrate the design and 3D laser nanoprinting of plasmonic nanofin metasurfaces, which support symmetry-protected bound states in the continuum up to the fourth order. By breaking the nanofins' out-of-plane symmetry in parameter space, we achieve high-quality factor (up to 180) modes under normal incidence. The out-of-plane symmetry breaking can be fine-tuned by the nanofins' triangle angle, opening a pathway to precisely control the ratio of radiative to intrinsic losses. This enables access to the under-, critical, and over-coupled regimes, which we exploit for pixelated molecular sensing. We observe a strong dependence of the sensing performance on the coupling regime, demonstrating the importance of judicious tailoring of light-matter interactions. Our demonstration provides a metasurface platform for enhanced light-matter interaction with a wide range of applications.

| S-EPMC9733921 | biostudies-literature

Optical Fiber Delivered Ultrafast Plasmonic Optical Switch.

Project description:Ultrafast optical switch based on plasmonic nanostructures has large application potentials in optical logic circuits and optical communication systems. Integration of plasmonic optical switching devices with optical fibers is a breakthrough for realizing practical applications in long-range optical data transmission or communication techniques. Here, the incorporation of plasmonic optical switch devices onto the end facets of optical fibers is reported, so that the switched optical signals are generated by interaction between femtosecond laser pulses and plasmonic nanostructures on one end of the fiber, and are delivered via the fiber waveguide to the other end for detection or decoding. "Quenching" of localized surface plasmon in the gold nanowires by its interaction with band-edge modulation in gold through strong optical excitation is the responsible photophysics. This work accomplishes for the first time the implementation of ultrafast plasmonic optical switch device on optical fiber tips for logic data transmission.

| S-EPMC8132049 | biostudies-literature

Wireless communication system via nanoscale plasmonic antennas.

Project description:Present on-chip optical communication technology uses near-infrared light, but visible wavelengths would allow system miniaturization and higher energy confinement. Towards this end, we report a nanoscale wireless communication system that operates at visible wavelengths via in-plane information transmission. Here, plasmonic antenna radiation mediates a three-step conversion process (surface plasmon???photon???surface plasmon) with in-plane efficiency (plasmon???plasmon) of 38% for antenna separation 4?0 (with ?0 the free-space excitation wavelength). Information transmission is demonstrated at bandwidths in the Hz and MHz ranges. This work opens the possibility of optical conveyance of information using plasmonic antennas for on-chip communication technology.

| S-EPMC4995427 | biostudies-literature

Controllable Tuning Plasmonic Coupling with Nanoscale Oxidation.

Project description:The nanoparticle on mirror (NPoM) construct is ideal for the strong coupling of localized plasmons because of its simple fabrication and the nanometer-scale gaps it offers. Both of these are much harder to control in nanoparticle dimers. Even so, realizing controllable gap sizes in a NPoM remains difficult and continuous tunability is limited. Here, we use reactive metals as the mirror so that the spacing layer of resulting metal oxide can be easily and controllably created with specific thicknesses resulting in continuous tuning of the plasmonic coupling. Using Al as a case study, we contrast different approaches for oxidation including electrochemical oxidation, thermal annealing, oxygen plasma treatments, and photo-oxidation by laser irradiation. The thickness of the oxidation layer is calibrated with depth-mode X-ray photoemission spectroscopy (XPS). These all consistently show that increasing the thickness of the oxidation layer blue-shifts the plasmonic resonance peak while the transverse mode remains constant, which is well matched by simulations. Our approach provides a facile and reproducible method for scalable, local and controllable fabrication of NPoMs with tailored plasmonic coupling, suited for many applications of sensing, photochemistry, photoemission, and photovoltaics.

| S-EPMC4485956 | biostudies-literature

Feasibility Study of an Optical Caustic Plasmonic Light Scattering Sensor for Human Serum Anti-Dengue Protein E Antibody Detection.

Project description:Antibody detection and accurate diagnosis of tropical diseases is essential to help prevent the spread of disease. However, most detection methods lack cost-effectiveness and field portability, which are essential features for achieving diagnosis in a timely manner. To address this, 3D-printed oblate spheroid sample chambers were fabricated to measure green light scattering of gold nanoparticles using an optical caustic focus to detect antibodies. Scattering signals of 20-200 nm gold nanoparticles using a green laser were compared to green light emitting diode (LED) light source signals and to Mie theory. The change in signal from 60 to 120 nm decreased in the order of Mie Theory > optical caustic scattering > 90° scattering. These results suggested that conjugating 60 nm gold nanoparticles and using an optical caustic system to detect plasmonic light scattering, would result in a sensitive test for detecting human antibodies in serum. Therefore, we studied the light scattering response of conjugated gold nanoparticles exposed to different concentrations of anti-protein E antibody, and a feasibility study of 10 human serum samples using dot blot and a handheld optical caustic-based sensor device. The overall agreement between detection methods suggests that the new sensor concept shows promise to detect gold nanoparticle aggregation in a homogeneous assay. Further testing and protocol optimization is needed to draw conclusions on the positive and negative predictive values for this new testing system.

| S-EPMC5617947 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data