A field-shaping multi-well avalanche detector for direct conversion amorphous selenium.
Ontology highlight
ABSTRACT:
SUBMITTER: Goldan AH
PROVIDER: S-EPMC3543372 | biostudies-other | 2013 Jan
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Amorphous selenium lacks the structural long-range order present in crystalline solids. However, the stark similarity in the short-range order that exists across its allotropic forms, augmented with a shift to non-activated extended-state transport at high electric fields beyond the onset of impact ionization, allowed us to perform this theoretical study, which describes the high-field extended-state hole transport processes in amorphous selenium by modeling the band-transport lattice theory of its crystalline counterpart trigonal selenium. An in-house bulk Monte Carlo algorithm is employed to solve the semiclassical Boltzmann transport equation, providing microscopic insight to carrier trajectories and relaxation dynamics of these non-equilibrium "hot" holes in extended states. The extended-state hole-phonon interaction and the lack of long-range order in the amorphous phase is modeled as individual scattering processes, namely acoustic, polar and non-polar optical phonons, disorder and dipole scattering, and impact ionization gain, which is modeled using a power law Keldysh fit. We have used a non-parabolic approximation to the density functional theory calculated valence band density of states. To validate our transport model, we calculate and compare our time of flight mobility, impact ionization gain, ensemble energy and velocity, and high field hole energy distributions with experimental findings. We reached the conclusion that hot holes drift around in the direction perpendicular to the applied electric field and are subject to frequent acceleration/deceleration caused by the presence of high phonon, disorder, and impurity scattering. This leads to a certain determinism in the otherwise stochastic impact ionization phenomenon, as usually seen in elemental crystalline solids.
| S-EPMC7905821 | biostudies-literature
Project description:Molecular oxygen excited to singlet state (Singlet oxygen, 1O2) becomes highly reactive and cytotoxic chemical. 1O2 is commonly generated by photoexcitation of dyes (photosensitizers), including the photodynamic therapy and diagnostics of cancer. However, the formation of singlet oxygen is often unwanted for various light-sensitive compounds, e.g. it causes the photobleaching of fluorescent probes. In either case, during a development of new photosensitive chemicals and drugs there is a need to evaluate the amount of 1O2 formed during photoexcitation. The direct approach in measuring the amount of singlet oxygen is based on the detection of its luminescence at 1270 nm. However, this luminescence is usually weak, which implies the use of highly sensitive single-photon detectors. Thus the existing instruments are commonly complicated and expensive. Here we suggest an approach and report a device to measure the 1O2 luminescence using low-cost InGaAs avalanche photodiode and simple electronics. The measurements can be performed in stationary (not time-resolved) mode in organic solvents such as tetrachloromethane (CCl4), ethanol and DMSO. In particular, we performed spectral-resolved measurements of the singlet oxygen luminescence in CCl4 with the device and demonstrated high complementarity to literature data. The simple setup allows to evaluate the efficiency (or speed) of singlet oxygen generation and hence facilitates the development and characterization of new photosensitizers and other photosensitive chemicals.
| S-EPMC9123435 | biostudies-literature
Project description:The nature of dark matter remains unknown to date, although several candidate particles are being considered in a dynamically changing research landscape1. Scalar field dark matter is a prominent option that is being explored with precision instruments, such as atomic clocks and optical cavities2-8. Here we describe a direct search for scalar field dark matter using a gravitational-wave detector, which operates beyond the quantum shot-noise limit. We set new upper limits on the coupling constants of scalar field dark matter as a function of its mass, by excluding the presence of signals that would be produced through the direct coupling of this dark matter to the beam splitter of the GEO600 interferometer. These constraints improve on bounds from previous direct searches by more than six orders of magnitude and are, in some cases, more stringent than limits obtained in tests of the equivalence principle by up to four orders of magnitude. Our work demonstrates that scalar field dark matter can be investigated or constrained with direct searches using gravitational-wave detectors and highlights the potential of quantum-enhanced interferometry for dark matter detection.
| S-EPMC8674151 | biostudies-literature
Project description:Liposomal formulations for the treatment of cancer and other diseases are the most common form of nanotechnology enabled pharmaceuticals (NEPs) submitted for market approval and in clinical application today. The accurate characterization of their physical-chemical properties is a key requirement; in particular, size, size distribution, shape, and physical-chemical stability are key among properties that regulators identify as critical quality attributes. Here we develop and validate an optimized method, based on multi-detector asymmetrical-flow field flow fractionation (MD-AF4) to accurately and reproducibly separate liposomal drug formulations into their component populations and to characterize their associated size and size distribution, whether monomodal or polymodal in nature. In addition, the results show that the method is suitable to measure liposomes in the presence of serum proteins and can yield information on the shape and physical stability of the structures. The optimized MD-AF4 based method has been validated across different instrument platforms, three laboratories, and multiple drug formulations following a comprehensive analysis of factors that influence the fractionation process and subsequent physical characterization. Interlaboratory reproducibility and intra-laboratory precision were evaluated, identifying sources of bias and establishing criteria for the acceptance of results. This method meets a documented high priority need in regulatory science as applied to NEPs such as Doxil and can be adapted to the measurement of other NEP forms (such as lipid nanoparticle therapeutics) with some modifications. Overall, this method will help speed up development of NEPS, and facilitate their regulatory review, ultimately leading to faster translation of innovative concepts from the bench to the clinic. Additionally, the approach used in this work (based on international collaboration between leading non-regulatory institutions) can be replicated to address other identified gaps in the analytical characterization of various classes of NEPs. Finally, a plan exists to pursue more extended interlaboratory validation studies to advance this method to a consensus international standard.
| S-EPMC7146538 | biostudies-literature
Project description:Cellulose nanocrystals (CNCs) are renewable, naturally derived polymeric nanomaterials receiving substantial attention for a wide range of potential applications. The recent availability of high quality reference materials will facilitate the development and validation of measurement methods needed to advance the scientific and commercial use of CNCs. In the present study, we demonstrate an optimized method to fractionate CNCs with narrow size dispersion based on asymmetrical-flow field-flow fractionation (AF4) coupled with on-line multi-angle light scattering (MALS), dynamic light scattering (DLS), and differential refractometry (dRI). A stable suspension of CNC (Certified Reference Material CNCD-1, National Research Council-Canada) in deionized water was prepared using a dispersion method provided by NRC and adopted from a protocol originally developed at the National Institute of Standards and Technology. The as-prepared material was initially characterized in batch mode to validate the NRC dispersion method. AF4 was then optimized for channel and cross flow, mobile phase composition, and injection volume, among other parameters. Additionally, suspensions containing (1.25-10) mg mL-1 CNC were injected directly into the dRI detector (off-line), yielding a dn/dc value of 0.148 ± 0.003 mL g-1. dRI was then used as an on-line mass sensitive detector to quantify recovery. Results show that maximum recovery (≈ 99%) was achieved under optimized conditions. The weight-averaged molar mass (Mw) was estimated at roughly 107 Da from a partial Zimm analysis. The optical radius of gyration, Rg, and the hydrodynamic radius, Rh, were measured during elution. The shape factor (Rg/Rh) ranged from 1.5 to 1.9 for the fractionated material, supporting an elongated or rod-like structure. To our knowledge, this is the first time that both the morphology and molar mass of CNCs have been directly measured for the full distribution of species. Finally, we developed and demonstrated a semi-preparatory fractionation method to separate CNCs at the milligram scale for off-line research and analysis.
| S-EPMC6057617 | biostudies-literature
Project description:Glasses are usually shaped through the viscous flow of a liquid before its solidification, as practiced in glass blowing. At or near room temperature (RT), oxide glasses are known to be brittle and fracture upon any mechanical deformation for shape change. Here, we show that with moderate exposure to a low-intensity (<1.8×10(-2) A cm(-2)) electron beam (e-beam), dramatic shape changes can be achieved for nanoscale amorphous silica, at low temperatures and strain rates >10(-4) per second. We show not only large homogeneous plastic strains in compression for nanoparticles but also superplastic elongations >200% in tension for nanowires (NWs). We also report the first quantitative comparison of the load-displacement responses without and with the e-beam, revealing dramatic difference in the flow stress (up to four times). This e-beam-assisted superplastic deformability near RT is useful for processing amorphous silica and other conventionally-brittle materials for their applications in nanotechnology.
| S-EPMC3047011 | biostudies-literature
Project description:Commonly deployed measurement systems for water waves are intrusive and measure a limited number of parameters. This results in difficulties in inferring detailed sea state information while additionally subjecting the system to environmental loading. Optical techniques offer a non-intrusive alternative, yet documented systems suffer a range of problems related to usability and performance. Here, we present experimental data obtained from a 256 × 256 Single Photon Avalanche Diode (SPAD) detector array used to measure water waves in a laboratory facility. 12 regular wave conditions are used to assess performance. Picosecond resolution time-of-flight measurements are obtained, without the use of dye, over an area of the water surface and processed to provide surface elevation data. The SPAD detector array is installed 0.487 m above the water surface and synchronized with a pulsed laser source with a wavelength of 532 nm and mean power <1 mW. Through analysis of the experimental results, and with the aid of an optical model, we demonstrate good performance up to a limiting steepness value, ka, of 0.11. Through this preliminary proof-of-concept study, we highlight the capability for SPAD-based systems to measure water waves within a given field-of-view simultaneously, while raising potential solutions for improving performance.
| S-EPMC8300601 | biostudies-literature
Project description:In this article we demonstrate the performance of a direct conversion amorphous selenium (a-Se) X-ray detector using biphenyldisnhydride/1,4 phenylenediamine (BPDA/PPD) polyimide (PI) as a hole-blocking layer. The use of a PI layer with a-Se allows detector operation at high electric fields (≥10 V/μm) while maintaining low dark current, without deterioration of transient performance. The hole mobility of the PI/a-Se device is measured by the time-of-flight method at different electric fields to investigate the effect of the PI layer on detector performance. It was found that hole mobility as high as 0.75 cm(2)/Vs is achievable by increasing the electric field in the PI/a-Se device structure. Avalanche multiplication is also shown to be achievable when using PI as a blocking layer. Increasing the electric field within a-Se reduces the X-ray ionization energy, increases hole mobility, and improves the dynamic range and sensitivity of the detector.
| S-EPMC3842535 | biostudies-other
Project description:Compared to polycrystalline semiconductors, amorphous semiconductors offer inherent cost-effective, simple and uniform manufacturing. Traditional amorphous hydrogenated Si falls short in electrical properties, necessitating the exploration of new materials. The creation of high-mobility amorphous n-type metal oxides, such as a-InGaZnO (ref. 1), and their integration into thin-film transistors (TFTs) have propelled advancements in modern large-area electronics and new-generation displays2-8. However, finding comparable p-type counterparts poses notable challenges, impeding the progress of complementary metal-oxide-semiconductor technology and integrated circuits9-11. Here we introduce a pioneering design strategy for amorphous p-type semiconductors, incorporating high-mobility tellurium within an amorphous tellurium suboxide matrix, and demonstrate its use in high-performance, stable p-channel TFTs and complementary circuits. Theoretical analysis unveils a delocalized valence band from tellurium 5p bands with shallow acceptor states, enabling excess hole doping and transport. Selenium alloying suppresses hole concentrations and facilitates the p-orbital connectivity, realizing high-performance p-channel TFTs with an average field-effect hole mobility of around 15 cm2 V-1 s-1 and on/off current ratios of 106-107, along with wafer-scale uniformity and long-term stabilities under bias stress and ambient ageing. This study represents a crucial stride towards establishing commercially viable amorphous p-channel TFT technology and complementary electronics in a low-cost and industry-compatible manner.
| S-EPMC11111403 | biostudies-literature
Project description:Light scattering at plasmonic nanoparticles and their assemblies has led to a wealth of applications in metamaterials and nano-optics. Although shaping of fields around nanostructures is widely studied, the influence of the field inside the nanostructures is often overlooked. The linear field distribution inside the structure taken to the third power causes third-harmonic generation, a nonlinear optical response of matter. Here we demonstrate by a far field Fourier imaging method how this simple fact can be used to shape complex fields around a single particle alone. We employ this scheme to switch the third-harmonic emission from a single point source to two spatially separated but coherent sources, as in Young's double-slit assembly. We envision applications as diverse as coherently feeding antenna arrays and optical spectroscopy of spatially extended electronic states.
| S-EPMC4735599 | biostudies-literature