Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Fabrication of hexagonally packed cell culture substrates using droplet formation in a T-shaped microfluidic junction.

ABSTRACT: A method is here proposed to fabricate ordered hexagonally packed cell culture substrates with hexagonally arranged cell patterning areas. We generated photo-sensitive polymeric microdroplets in a T-shaped microfluidic junction by an immiscible liquid, and then solidified the collective self-assembled hexagonal droplet array to obtain the cell culture substrate, on which we took the grooves formed between the solidified droplets as the hexagonally arranged cell patterning areas. The most promising advantage of our method is that we can actively tune the droplet size by simply adopting different volumetric flow rates of the two immiscible fluids to form cell culture substrates with differently sized cell patterning areas. Besides, the examination results of the cell culture substrate's characteristics validate whether our method is capable of creating substrates with high spatial uniformity. To verify the cell patterning function of our cell culture substrates, we used the semi-adherent RAW cells to demonstrate the effectiveness of patterning of suspended/adherent cells before/after adhesion. Over 90% cell viability and cell patterning rate suggest that our method may be a promising approach for future applications of cell patterning on biochips.

SUBMITTER: Peng Lee C

PROVIDER: S-EPMC3555912 | biostudies-other | 2013

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Controlling droplet incubation using close-packed plug flow.

Project description:Controlling droplet incubation is critical for droplet-based microfluidic applications; however, current techniques are either of limited precision or place strict limits on the incubation times that can be achieved. Here, we present a simple technique to control incubation time by exploiting close-packed plug flow. In contrast to other techniques, this technique is applicable to very short and very long incubation times.

| S-EPMC3085533 | biostudies-other

Surface-tension driven open microfluidic platform for hanging droplet culture.

Project description:The hanging droplet technique for three-dimensional tissue culture has been used for decades in biology labs, with the core technology remaining relatively unchanged. Recently microscale approaches have expanded the capabilities of the hanging droplet method, making it more user-friendly. We present a spontaneously driven, open hanging droplet culture platform to address many limitations of current platforms. Our platform makes use of two interconnected hanging droplet wells, a larger well where cells are cultured and a smaller well for user interface via a pipette. The two-well system results in lower shear stress in the culture well during fluid exchange, enabling shear sensitive or non-adherent cells to be cultured in a droplet. The ability to perform fluid exchanges in-droplet enables long-term culture, treatment, and characterization without disruption of the culture. The open well format of the platform was utilized to perform time-dependent coculture, enabling culture configurations with bone tissue scaffolds and cells grown in suspension. The open nature of the system allowed the direct addition or removal of tissue over the course of an experiment, manipulations that would be impractical in other microfluidic or hanging droplet culture platforms.

| S-EPMC4712910 | biostudies-literature

Microfluidic Droplet-Assisted Fabrication of Vessel-Supported Tumors for Preclinical Drug Discovery.

Project description:High-fidelity in vitro tumor models are important for preclinical drug discovery processes. Currently, the most commonly used model for in vitro drug testing remains the two-dimensional (2D) cell monolayer. However, the natural in vivo tumor microenvironment (TME) consists of extracellular matrix (ECM), supporting stromal cells and vasculature. They not only participate in the progression of tumors but also hinder drug delivery and effectiveness on tumor cells. Here, we report an integrated engineering system to generate vessel-supported tumors for preclinical drug screening. First, gelatin-methacryloyl (GelMA) hydrogel was selected to mimic tumor extracellular matrix (ECM). HCT-116 tumor cells were encapsulated into individual micro-GelMA beads with microfluidic droplet technique to mimic tumor-ECM interactions in vitro. Then, normal human lung fibroblasts were mingled with tumor cells to imitate the tumor-stromal interaction. The tumor cells and fibroblasts reconstituted in the individual GelMA microbead and formed a biomimetic heterotypic tumor model with a core-shell structure. Next, the cell-laden beads were consociated into a functional on-chip vessel network platform to restore the tumor-tumor microenvironment (TME) interaction. Afterward, the anticancer drug paclitaxel was tested on the individual and vessel-supported tumor models. It was demonstrated that the blood vessel-associated TME conferred significant additional drug resistance in the drug screening experiment. The reported system is expected to enable the large-scale fabrication of vessel-supported heterotypic tumor models of various cellular compositions. It is believed to be promising for the large-scale fabrication of biomimetic in vitro tumor models and may be valuable for improving the efficiency of preclinical drug discovery processes.

| S-EPMC10249002 | biostudies-literature

Droplet based microfluidic fabrication of designer microparticles for encapsulation applications.

Project description:Developing carriers of active ingredients with pre-determined release kinetics is a main challenge in the field of controlled release. In this work, we fabricate designer microparticles as carriers of active ingredients using droplet microfluidics. We show that monodisperse droplet templates do not necessarily produce monodisperse particles. Magnetic stirring, which is often used to enhance the droplet solidification rate, can promote breakup of the resultant microparticles into fragments; with an increase in the stirring time, microparticles become smaller in average size and more irregular in shape. Thus, the droplet solidification conditions affect the size, size distribution and morphology of the fabricated particles, and these attributes of the microparticles strongly influence their release kinetics. The smaller the average size of the microparticles is, the higher the initial release rate is. The release kinetics of drug carriers is strongly related to their characteristics. The understanding of this relationship enables the fabrication of tailor-designed carriers with a specified release rate, and even programmed release to meet the needs of applications that require a complex release profile of the active ingredients.

| S-EPMC3411553 | biostudies-other

Mode Transition of Droplet Formation in a Semi-3D Flow-Focusing Microfluidic Droplet System.

Project description:Uniform droplets have significant potential in many biological applications due to their higher surface area to volume ratio. This paper proposed a semi-three-dimensional (sime-3D) flow-focusing microfluidic system, which was fabricated using the multi-layer soft lithography method. Based on the semi-3D structure, we focus on droplets formation modes and droplet uniformity at different bulk concentration of surfactant. The relationships between droplets uniformity, droplets breakup processes (jetting mode, dripping mode and tip-streaming mode) and surfactant concentration was investigated. It was found that three droplet generation modes occur through adjusting the pressure ratio in two inlet channels and the concentration of surfactant in continuous phase liquid. The jetting mode would transform to the dripping mode or the tip-streaming mode as the pressure ratio in different surfactant concentrations increased. Furthermore, the uniformity of droplets could be improved through the transition of jetting to dripping mode. We assumed that the uniformity declined through the transition of jetting to tip-streaming, and explored the specific transitions from jetting to dripping mode and tip-streaming mode. Dripping mode leads to high droplet uniformity, and generation frequency decreases with increasing pressure ratio. Tip-streaming mode is considered as an extreme state of jetting mode, leading to higher formation frequency and smaller droplet size at low uniformity.

| S-EPMC6187513 | biostudies-literature

Dynamic Culture Substrates That Mimic the Topography of the Epidermal-Dermal Junction.

Project description:Impact statementIn human skin the junction between the epidermis and dermis undulates. Epidermal stem cells pattern according to their position relative to those undulations. Here we describe a rig in which epidermal cells are cultured on a collagen-coated poly(d,l-lactide-co-glycolide) (PLGA) membrane. When a vacuum is applied the membrane is induced to undulate. Stem cells cluster in response to the vacuum, whereas differentiating cells do not. Rho kinase inhibition results in loss of clustering, suggesting a role for Rho family members in the process. This dynamic platform is a new tool for investigating changes in the skin with age and disease.

| S-EPMC6388717 | biostudies-literature

The Combined Effects of Co-Culture and Substrate Mechanics on 3D Tumor Spheroid Formation within Microgels Prepared via Flow-Focusing Microfluidic Fabrication.

Project description:Tumor spheroids are considered a valuable three dimensional (3D) tissue model to study various aspects of tumor physiology for biomedical applications such as tissue engineering and drug screening as well as basic scientific endeavors, as several cell types can efficiently form spheroids by themselves in both suspension and adherent cell cultures. However, it is more desirable to utilize a 3D scaffold with tunable properties to create more physiologically relevant tumor spheroids as well as optimize their formation. In this study, bioactive spherical microgels supporting 3D cell culture are fabricated by a flow-focusing microfluidic device. Uniform-sized aqueous droplets of gel precursor solution dispersed with cells generated by the microfluidic device are photocrosslinked to fabricate cell-laden microgels. Their mechanical properties are controlled by the concentration of gel-forming polymer. Using breast adenocarcinoma cells, MCF-7, the effect of mechanical properties of microgels on their proliferation and the eventual spheroid formation was explored. Furthermore, the tumor cells are co-cultured with macrophages of fibroblasts, which are known to play a prominent role in tumor physiology, within the microgels to explore their role in spheroid formation. Taken together, the results from this study provide the design strategy for creating tumor spheroids utilizing mechanically-tunable microgels as 3D cell culture platform.

| S-EPMC6321249 | biostudies-literature

Single-cell RNA-seq of of dermal fibroblasts using microfluidic droplet capture (unstimulated cells)

Project description:The innate immune response - the expression programme that is initiated once a pathogen is sensed - is known to be variable among responding cells, as well as to rapidly evolve in the course of mammal evolution. To study the transcriptional divergence and cell-to-cell variability of this response, we stimulated dermal fibroblast cells from two primates (human and macaque) and two rodents (mouse and rat) with dsRNA - a mimic of viral RNA that elicits a rapid innate immune response. Subsequently, we profiled the response using bulk RNA-seq, scRNA-seq and ChIP-seq across the four species and across different time points.<br>This experiment contains data of dermal fibroblasts from 3 human individuals, unstimulated, sequenced by 10X Genomics technology. Corresponding data from stimulated cells are found under ArrayExpress accession <a href="/arrayexpress/experiments/E-MTAB-5989">E-MTAB-5989</a>.

2018-07-06 | E-MTAB-5988 | biostudies-arrayexpress

Single-cell RNA-seq of of dermal fibroblasts using microfluidic droplet capture (stimulated cells)

Project description:The innate immune response - the expression programme that is initiated once a pathogen is sensed - is known to be variable among responding cells, as well as to rapidly evolve in the course of mammal evolution. To study the transcriptional divergence and cell-to-cell variability of this response, we stimulated dermal fibroblast cells from two primates (human and macaque) and two rodents (mouse and rat) with dsRNA - a mimic of viral RNA that elicits a rapid innate immune response. Subsequently, we profiled the response using bulk RNA-seq, scRNA-seq and ChIP-seq across the four species and across different time points.<br>This experiment contains data of dermal fibroblasts from 3 human individuals, stimulated with dsRNA (poly I:C) for 6 hours, sequenced by 10X Genomics technology. Corresponding data from unstimulated cells are found under ArrayExpress accession <a href="/arrayexpress/experiments/E-MTAB-5988">E-MTAB-5988</a>.

2018-07-06 | E-MTAB-5989 | biostudies-arrayexpress

Fluid displacement during droplet formation at microfluidic flow-focusing junctions.

Project description:Microdroplets and microcapsules have been widely produced using microfluidic flow-focusing junctions for biomedical and chemical applications. However, the multiphase microfluidic flow at the flow-focusing junction has not been well investigated. In this study, the displacement of two (core and shell) aqueous fluids that disperse into droplets altogether in a carrier oil emulsion was investigated both numerically and experimentally. It was found that extensive displacement of the two aqueous fluids within the droplet during its formation could occur as a result of the shear effect of the carrier fluid and the capillary effect of interfacial tension. We further identified that the two mechanisms of fluid displacement can be evaluated by two dimensionless parameters. The quantitative relationship between the degree of fluid displacement and these two dimensionless parameters was determined experimentally. Finally, we demonstrated that the degree of fluid displacement could be controlled to generate hydrogel microparticles of different morphologies using planar or nonplanar flow-focusing junctions. These findings should provide useful guidance to the microfluidic production of microscale droplets or capsules for various biomedical and chemical applications.

| S-EPMC4605896 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data