The possibility of giant dielectric materials for multilayer ceramic capacitors.
Ontology highlight
ABSTRACT:
SUBMITTER: Ishii T
PROVIDER: S-EPMC3585747 | biostudies-other | 2013 Feb
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Understanding the electromechanical breakdown mechanisms of polycrystalline ceramics is critical to texture engineering for high-energy-density dielectric ceramics. Here, an electromechanical breakdown model is developed to fundamentally understand the electrostrictive effect on the breakdown behavior of textured ceramics. Taking the Na0.5 Bi0.5 TiO3 -Sr0.7 Bi0.2 TiO3 ceramic as an example, it is found that the breakdown process significantly depends on the local electric/strain energy distributions in polycrystalline ceramics, and reasonable texture design could greatly alleviate electromechanical breakdown. Then, high-throughput simulations are performed to establish the mapping relationship between the breakdown strength and different intrinsic/extrinsic variables. Finally, machine learning is conducted on the database from the high-throughput simulations to obtain the mathematical expression for semi-quantitatively predicting the breakdown strength, based on which some basic principles of texture design are proposed. The present work provides a computational understanding of the electromechanical breakdown behavior in textured ceramics and is expected to stimulate more theoretical and experimental efforts in designing textured ceramics with reliable electromechanical performances.
| S-EPMC10238190 | biostudies-literature
Project description:The copper end paste used in multilayer ceramic capacitors sintered in nitrogen atmosphere leads to carbon residues of organic vehicles, which leads to a reduction in electrode conductivity and high scrap rate. With an attempt to leave no residue in the sintering, the compatibility of solvents and thickeners should be improved because it has an important influence on the hierarchical volatilization and carbon residue of organic vehicles. In this work, the volatility of different solvents was compared, and several solvents were mixed in a definite proportion to prepare an organic vehicle with polyacrylate resins. The hierarchical volatility and solubility parameters of mixed solvents were effectively adjusted by changing proportions of different components. The thermogravimetric curves of resins and organic vehicles were measured by thermogravimetric analyzer, and the effect of solubility parameter on the dissolvability of resins in the solvent and the residual of organic vehicles were studied. Results showed that the hierarchical volatilization of solvents can be obtained by mixing different solvents; the intrinsic viscosity of the organic vehicle is higher, and the thermal decomposition residue of polyacrylate resins is lower when the solubility parameters of mixed solvents and polyacrylate resins are closer. The low residual sintering of organic vehicles can be achieved by using a mixed solvent with hierarchical volatility and approximate solubility parameters as resins.
| S-EPMC8879018 | biostudies-literature
Project description:For a high capacitance and high lifetime reliability of multilayer ceramic capacitors for automotive applications, the activation energy on thermal activation process can typically be calculated by using Arrhenius based Prokopowicz-Vaskas equation as a method for lifetime prediction. In this study, it is clearly observed that the activation energy shows to be constant in the range of ~ 1.5 eV for the prototype MLCCs, higher than the activation energy values of ~ 1.0 eV related to the motion or diffusion of oxygen vacancies reported in the previous literature. The activation energy value of ~ 1.5 eV for three prototype MLCCs is close to a half the energy band gap (Eg/2 ≈ 1.6 eV) of BaTiO3 obtained from specific environment, where oxygen vacancies are stabilized by external containment such as the effect of rare earth oxide additives. Due to an obvious difference in activation energy values, it difficult to explain the conduction mechanism for failure by only oxygen vacancy migration. Therefore, the concepts of electronic processes and oxygen vacancy should be considered together to understand conduction mechanism for failure of BaTiO3-based MLCCs in thermal activation processes. It can be useful as an indicator for future MLCC development with high lifetime reliability.
| S-EPMC10770127 | biostudies-literature
Project description:In recent years, the development of implantable electronics has been driven by the motivation to expand their field of application. The main intention is to implement advanced functionalities while increasing the degree of miniaturization and maintaining reliability. The intrinsic nonlinear properties of the electronic components, to be used anyway, could be utilized to resolve this issue. To master the implementation of functionalities in implantable electronics using the nonlinear properties of its electronic components, simulation models are of utmost importance. In this paper, we present a simulation model that is optimized in terms of consistency, computing time and memory consumption. Three circuit topologies of nonlinear capacitors, including hysteresis losses, are investigated. An inductively coupled measurement setup was realized to validate the calculations. The best results were obtained using the Trapezoid method in ANSYS with a constant step size and a resolution of 500 k points and using the Adams method in Mathcad with a resolution of 50 k points. An inductive coupling factor between 7% and 10% leads to a significant improvement in consistency compared to lower coupling factors. Finally, our results indicate that the nonlinear properties of the voltage rectifier capacitor can be neglected since these do not significantly affect the simulation results.
| S-EPMC7435732 | biostudies-literature
Project description:The construction and performance of a second generation of super dielectric material based electrostatic capacitors (EC), with energy density greater than 200 J·cm-³, which rival the best reported energy density of electric double layer capacitors (EDLC), also known as supercapacitors, are reported. The first generation super dielectric materials (SDM) are multi-material mixtures with dielectric constants greater than 1.0 × 10⁵, composed of a porous, electrically insulating powder filled with a polarizable, ion-containing liquid. Second-generation SDMs (TSDM), introduced here, are anodic titania nanotube arrays filled with concentrated aqueous salt solutions. Capacitors using TiO₂ based TSDM were found to have dielectric constants at ~0 Hz greater than 10⁷ in all cases, a maximum operating voltage of greater than 2 volts and remarkable energy density that surpasses the highest previously reported for EC capacitors by approximately one order of magnitude. A simple model based on the classic ponderable media model was shown to be largely consistent with data from nine EC type capacitors employing TSDM.
| S-EPMC5512908 | biostudies-other
Project description:Aim The aim of this in vitro study was to evaluate the new, multilayered, translucent zirconia and enhanced glass-ceramics to determine if their translucency (TP) and color stability (?E) are affected by thermocycling at 10,000, 30,000, and 50,000 cycles. Materials & methods Two pre-shaded, multilayer zirconia products: Prettau® 2 Dispersive® (PRT) and Prettau® 4 Anterior® Multi® (PRTA), and two glass-ceramic: IPS e.max CAD® HT (E.max) and Vita Suprinity® HT (VS) were used. All were prepared and sectioned to get plate specimens with dimensions 12.5x14.5x1 mm (n=12) for each material. The L*a*b* values were recorded using a spectrophotometer before and after thermocycling for 10,000, 30,000, and 50000 cycles. The translucencies of the specimens were calculated using the TP formula and the color changes were giving by the color differences ?E formula at each interval. Results One-way analysis of variance (ANOVA) was used to analyze the data followed by Scheffe's post-hoc test and multiple paired t-tests (P < 0.05). There was a statistically significant higher TP for E.max before (16.2) and after aging (16.9) (p<0.001**). All the tested groups showed a statistically significant increase in their TP at different intervals. PRT showed significantly higher ?E (p<0.001**) after 50,000 cycles. Conclusion There was a mild but significant increase in translucency in both Zirconia and glass-ceramic after thermocycling. In addition, all materials showed a significant color change with time, however, this is not clinically perceptible.
| S-EPMC7067582 | biostudies-literature
Project description:This study presents the construction and dielectric properties investigation of atomic-layer-deposition Al2O3/TiO2/HfO2 dielectric-film-based metal-insulator-metal (MIM) capacitors. The influence of the dielectric layer material and thickness on the performance of MIM capacitors are also systematically investigated. The morphology and surface roughness of dielectric films for different materials and thicknesses are analyzed via atomic force microscopy (AFM). Among them, the 25 nm Al2O3-based dielectric capacitor exhibits superior comprehensive electrical performance, including a high capacitance density of 7.89 fF·µm-2, desirable breakdown voltage and leakage current of about 12 V and 1.4 × 10-10 A·cm-2, and quadratic voltage coefficient of 303.6 ppm·V-2. Simultaneously, the fabricated capacitor indicates desirable stability in terms of frequency and bias voltage (at 1 MHz), with the corresponding slight capacitance density variation of about 0.52 fF·µm-2 and 0.25 fF·µm-2. Furthermore, the mechanism of the variation in capacitance density and leakage current might be attributed to the Poole-Frenkel emission and charge-trapping effect of the high-k materials. All these results indicate potential applications in integrated passive devices.
| S-EPMC9227371 | biostudies-literature
Project description:High-density integration in single component used for mobile communication is highly demanded with the miniaturization trend in multi-functional light-weighted mobile communication devices. Embedding passive components into multi-layered ceramic chips is also increasingly needed for high integrity. The need for high strength materials to be used in handheld devices has also increased. To this end, many attempts to join different low-temperature co-fired ceramics (LTCC) materials with different dielectric constants have been made, but failed with de-laminations or internal cracks mainly due to difference of thermal expansion coefficients. It is thought that this difference could be minimized with the use of common glass in different LTCC materials. In this study, several candidates of common glass were mixed with various fillers of LTCC to have various dielectric constants in the radio-frequency, and to minimize the mismatch in joining. Ca-Al-Si-O glass was mixed with 1.3MgO-TiO2, cordierite and CaTiO3. Mixtures were tape-cast and sintered to be compared with their micro-structures, dielectric properties and thermo-mechanical characteristics. When 1.3MgO-TiO2 with volumetric ratio of 30% was mixed with Ca-Al-Si-O glass, the measured dielectric constant was 7.9, the quality factor was 3708. With 45 volumetric percent of cordierite, the dielectric constant was 5 and the quality factor was 1052.
| S-EPMC4433905 | biostudies-literature
Project description:An investigation is made of wear mechanisms in a suite of dental materials with a ceramic component and tooth enamel using a laboratory test that simulates clinically observable wear facets. A ball-on-3-specimen wear tester in a tetrahedral configuration with a rotating hard antagonist zirconia sphere is used to produce circular wear scars on polished surfaces of dental materials in artificial saliva. Images of the wear scars enable interpretation of wear mechanisms, and measurements of scar dimensions quantify wear rates. Rates are lowest for zirconia ceramics, highest for lithium disilicate, with feldspathic ceramic and ceramic-polymer composite intermediate. Examination of wear scars reveals surface debris, indicative of a mechanism of material removal at the microstructural level. Microplasticity and microcracking models account for mild and severe wear regions. Wear models are used to evaluate potential longevity for each dental material. It is demonstrated that controlled laboratory testing can identify and quantify wear susceptibility under conditions that reflect the essence of basic occlusal contact. In addition to causing severe material loss, wear damage can lead to premature tooth or prosthetic failure.
| S-EPMC6414209 | biostudies-literature
Project description:Ceramic laser materials have come a long way since the first demonstration of lasing in 1964. Improvements in powder synthesis and ceramic sintering as well as novel ideas have led to notable achievements. These include the first Nd:yttrium aluminum garnet (YAG) ceramic laser in 1995, breaking the 1 KW mark in 2002 and then the remarkable demonstration of more than 100 KW output power from a YAG ceramic laser system in 2009. Additional developments have included highly doped microchip lasers, ultrashort pulse lasers, novel materials such as sesquioxides, fluoride ceramic lasers, selenide ceramic lasers in the 2 to 3 μm region, composite ceramic lasers for better thermal management, and single crystal lasers derived from polycrystalline ceramics. This paper highlights some of these notable achievements.
| S-EPMC5448906 | biostudies-other