Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Influence of manganese doping to the full tensor properties of 0.24Pb(In1/2Nb1/2)O3-0.47Pb(Mg1/3Nb2/3)O3-0.29PbTiO3 single crystals.

ABSTRACT: Complete sets of elastic, piezoelectric, dielectric, and electromechanical properties of [001]c and [011]c poled pure and 0.5 wt. % manganese-doped 0.24Pb(In1/2Nb1/2)O3-0.47Pb(Mg1/3Nb2/3)O3-0.29PbTiO3 single crystals have been characterized at room temperature. The results indicate that manganese ion substitution in the B-site of perovskite 0.24PIN-0.47PMN-0.29PT single crystals makes the material harder with much higher mechanical quality factor Qm and slight decrease in piezoelectric and dielectric constants. The much improved Qm value (200-900) makes Mn-doped single crystals more suitable for high-power transducer applications than pure single crystals.

SUBMITTER: Sun E

PROVIDER: S-EPMC3592884 | biostudies-other | 2013 Feb

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Influence of Domain Size on the Scaling Effects in Pb(Mg1/3Nb2/3)O3-PbTiO3 Ferroelectric Crystals.

Project description:The property degradation observed in thin Pb(Mg(1/3)Nb(2/3))O(3)-PbTiO(3) (PMN-PT) crystals is believed to relate to large domains and subsequent clamping induced by surface-boundary. In this work, the properties were investigated as function of domain size, using controlled poling. The degraded piezoelectric and dielectric properties of thin PMN-PT were found to increase significantly, by decreasing domain size. Furthermore, the fine domain structure was found to be stable at 3kV/cm after 7.0×10(5) negative-pulse cycles, hence, enabling PMN-PT crystals for high-frequency (>20 MHz) ultrasound-transducers.

| S-EPMC3086291 | biostudies-literature

Bipolar loop-like non-volatile strain in the (001)-oriented Pb(Mg1/3Nb2/3)O3-PbTiO3 single crystals.

Project description:Strain has been widely used to manipulate the properties of various kinds of materials, such as ferroelectrics, semiconductors, superconductors, magnetic materials, and "strain engineering" has become a very active field. For strain-based information storage, the non-volatile strain is very useful and highly desired. However, in most cases, the strain induced by converse piezoelectric effect is volatile. In this work, we report a non-volatile strain in the (001)-oriented Pb(Mg1/3Nb2/3)O3-PbTiO3 single crystals and demonstrate an approach to measure the non-volatile strain. A bipolar loop-like S-E curve is revealed and a mechanism involving 109° ferroelastic domain switching is proposed. The non-volatile high and low strain states should be significant for applications in information storage.

| S-EPMC3975321 | biostudies-literature

Linear electro-optic properties of relaxor-based ferroelectric 0.24Pb(In1/2Nb1/2)O3-(0.76 - x)Pb(Mg1/3Nb2/3)O3-xPbTiO3 single crystals.

Project description:Linear electro-optic properties of 0.24Pb(In1/2Nb1/2)O3-(0.76 - x)Pb(Mg1/3Nb2/3)O3-xPbTiO3 single crystals, with compositions in the rhombohedral, morphotropic phase boundary (MPB) and tetragonal phases, have been investigated. Very large effective electro-optic coefficient [Formula: see text] (204 pm/V) was observed in a crystal with the MPB composition when it is poled along [001]. The rhombohedral phase (x = 0.27 and 0.30) single crystals poled along [111] direction and tetragonal phase (x = 0.39) single crystal poled along [001] direction are in single domain, and their electro-optic coefficients ([Formula: see text] = 76, 94, and 43 pm/V for the crystals with x = 0.27, 0.30, and 0.39, respectively) were found to be much higher than that of traditional electro-optic single crystal LiNbO3 ([Formula: see text] = 19.9 pm/V). The electro-optic coefficients of the single crystal in the rhombohedral phase have excellent temperature stability in the experimental temperature range of 10-40 °C. The half-wave voltage [Formula: see text] was calculated to be much lower (less than 1000 V) than that of LiNbO3 single crystal (2800 V). These superior properties make the ternary relaxor-PT single crystals very promising for electro-optic modulation applications.

| S-EPMC3724701 | biostudies-other

Hydrostatic piezoelectric properties of [011] poled Pb(Mg1/3Nb2/3)O3-PbTiO3 single crystals and 2-2 lamellar composites.

Project description:The hydrostatic piezoelectric properties of [011] poled Pb(Mg1/3Nb2/3)O3-PbTiO3 (PMN-PT) crystals and corresponding 2-2 crystal/epoxy composites were investigated. The crystal volume ratio and compositional dependencies of the hydrostatic charge and voltage coefficients (dh and gh ) and hydrostatic figure of merit (FOM) dh × gh were determined, where large FOM value of 3.2 pm(2)/N with high stability as a function of hydrostatic pressure was achieved for rhombohedral crystal composites. In addition, the stress amplification effects of the face-plate and different epoxy matrixes were investigated, with maximum FOM value being on the order of 92 pm(2)/N, indicating that 2-2 crystal/epoxy composites are promising materials for hydrostatic applications.

| S-EPMC3977785 | biostudies-other

Complete set of elastic, dielectric, and piezoelectric constants of [011]C poled rhombohedral Pb(In0.5Nb0.5)O3-Pb(Mg1/3Nb2/3)O3-PbTiO3:Mn single crystals.

Project description:Mn modified rhombohedral Pb(In0.5Nb0.5)O3-Pb(Mg1/3Nb2/3)O3-PbTiO3 (PIN-PMN-PT:Mn) single crystals poled along [011]C crystallographic direction exhibit a "2R" engineered domain configuration, with macroscopic mm2 symmetry. The complete sets of material constants were determined using combined resonance and ultrasonic methods, and compared to [001]C poled PIN-PMN-PT:Mn crystals. The thickness shear piezoelectric coefficient d15 and electromechanical coupling factor k15 were found to be on the order of ∼3000 pC/N and 0.92, respectively, with longitudinal piezoelectric coefficient d33 and coupling factor k33 being on the order of ∼1050 pC/N and 0.90. Of particular importance is that PIN-PMN-PT:Mn single crystals exhibited high mechanical quality factor Q33 ∼ 1000, comparable to "hard" PZT8 ceramics, which can also be confirmed by the low extrinsic contribution, being ≤2% from the Rayleigh analysis.

| S-EPMC3592883 | biostudies-other

Humidity Effects on Domain Structure and Polarization Switching of Pb(Zn1/3Nb2/3)O3-x%PbTiO3 (PZN-x%PT) Single Crystals.

Project description:The effect of relative humidity on the domain structure imaging and polarization switching process of Pb(Zn1/3Nb2/3)O3-x%PbTiO3 (PZN-x%PT) ferroelectric single crystals has been investigated by means of the piezoresponse force microscopy (PFM) and piezoresponse force spectroscopy (PFS) techniques. It was found that the PFM amplitude increases with the relative humidity, and that the ferroelectric hysteresis loops at different relative humidity levels show that the coercive bias decreases with the increase in relative humidity. These observed phenomena are attributed to the existence of the water layer between the probe tip and the sample surface in a humid atmosphere, which could affect the effect of the electric field distribution and screening properties at the ferroelectric sample surface. These results provide a better understanding of the water adsorption phenomena at the nanoscale in regard to the fundamental understanding of ferroelectrics' properties.

| S-EPMC8125925 | biostudies-literature

Strain assisted electrocaloric effect in PbZr0.95Ti0.05O3 films on 0.7Pb(Mg1/3Nb2/3)O3-0.3PbTiO3 substrate.

Project description:Solid state cooling technologies based on electrocaloric, magnetocaloric and mechanocaloric effects have received much attention during the past decade. To further improve the cooling efficiency and reduce the driving field, it is desirable to combine multiple effects in a single system. Here, we report on the caloric effects induced by both electric field and strain in PbZr0.95Ti0.05O3 films deposited on 0.7Pb(Mg1/3Nb2/3)O3-0.3PbTiO3 substrate. The isothermal entropy change (ΔS) induced by the antiferroelectric-ferroelectric phase transition of PbZr0.95Ti0.05O3 films is calculated to be 6.78 J K(-1) kg(-1). Furthermore, the strain from 0.7Pb(Mg1/3Nb2/3)O3-0.3PbTiO3 substrate can reduce the electric field where ΔS reaches the maximum by as much as 50 kV/cm. The electrocaloric efficiency is also increased from 0.366 to 0.378 by the strain effect. The electrocaloric effect in an antiferroelectric material assisted by strain may lead to more efficient solid state cooling technology.

| S-EPMC4632013 | biostudies-other

Manganese-doping enhanced local heterogeneity and piezoelectric properties in potassium tantalate niobate single crystals.

Project description:Ion doping, an effective way to modify the nature of materials, is beneficial for the improvement of material properties. Mn doping exhibits gain of piezoelectric properties in KTa1-x Nb x O3 (KTN). However, the impact mechanism of Mn ions on properties remains unclear. Here, the effects of Mn doping on local heterogeneity and piezoelectric properties in KTN are studied. The electric field-induced strain of Mn-doped KTN is ∼0.25% at 10 kV cm-1, 118% higher than that of pristine KTN. Meanwhile, as a result of Mn doping, the dielectric permittivity was tripled and the ferroelectricity was modified. The changes in A1(2TO), B1 + E(3TO) and E(4TO) vibrations characterized by Raman spectra indicate increased local polarization, weak correlation of dipoles and distorted lattices in Mn-doped KTN, respectively. First-principles calculations demonstrate stronger local heterogeneity introduced by Mn dopants, which weakens the dipole correlations and reduces domain sizes. As a result, the decreased domain sizes, combined with the larger ratio of lattice parameters c and a of the Mn-contained portion, are responsible for the higher piezoelectricity. This work reveals the impact on properties of KTN from Mn dopants and the prominent role of local heterogeneity in improving piezoelectricity, being valuable for the optimization and design of material properties.

| S-EPMC7924224 | biostudies-literature

Study on dielectric and piezoelectric properties of 0.7 Pb(Mg1/3Nb2/3)O3-0.3 PbTiO3 single crystal with nano-patterned composite electrode.

Project description:Effect of nano-patterned composite electrode and backswitching poling technique on dielectric and piezoelectric properties of 0.7 Pb(Mg1/3Nb2/3)O3-0.3 PbTiO3 was studied in this paper. Composite electrode consists of Mn nano-patterns with pitch size of 200 nm, and a blanket layer of Ti/Au was fabricated using a nanolithography based lift-off process, heat treatment, and metal film sputtering. Composite electrode and backswitching poling resulted in 27% increase of d33 and 25% increase of dielectric constant, and we believe that this is attributed to regularly defined nano-domains and irreversible rhombohedral to monoclinic phase transition in crystal. The results indicate that nano-patterned composite electrode and backswitching poling has a great potential in domain engineering of relaxor single crystals for advanced devices.

| S-EPMC3790807 | biostudies-other

Electric field manipulation of magnetic and transport properties in SrRuO3/Pb(Mg1/3Nb2/3)O3-PbTiO3 heterostructure.

Project description:The electric field manipulation of magnetic properties is currently of great interest for the opportunities provided in low-energy-consuming spintronics devices. Here, we report the effect of electric field on magnetic and transport properties of the ferromagnetic SrRuO(3) film which is epitaxially grown on Pb(Mg(1/3)Nb(2/3))O3-PbTiO(3) ferroelectric substrate. With the application of electric field on the substrate, the magnetization, Curie temperature and resistivity of SrRuO(3) are effectively modified. The mechanism of the electric field manipulation of these properties is ascribed to the rotations of RuO6 oxygen octahedra caused by the electric-field-induced strain, which changes the overlap and hybridization between the Ru 4d orbitals and O 2p orbitals, resulting in the modification of the magnetic and electronic properties.

| S-EPMC4227015 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data