Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Graphene-based photovoltaic cells for near-field thermal energy conversion.

ABSTRACT: Thermophotovoltaic devices are energy-conversion systems generating an electric current from the thermal photons radiated by a hot body. While their efficiency is limited in far field by the Schockley-Queisser limit, in near field the heat flux transferred to a photovoltaic cell can be largely enhanced because of the contribution of evanescent photons, in particular for a source supporting a surface mode. Unfortunately, in the infrared where these systems operate, the mismatch between the surface-mode frequency and the semiconductor gap reduces drastically the potential of this technology. In this paper we propose a modified thermophotovoltaic device in which the cell is covered by a graphene sheet. By discussing the transmission coefficient and the spectral properties of the flux, we show that both the cell efficiency and the produced current can be enhanced, paving the way to promising developments for the production of electricity from waste heat.

SUBMITTER: Messina R

PROVIDER: S-EPMC3593225 | biostudies-other | 2013

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Graphene-based autonomous pyroelectric system for near-field energy conversion.

Project description:In the close vicinity of a hot solid, at distances smaller than the thermal wavelength, a strong electromagnetic energy density exists because of the presence of evanescent field. Here we introduce a many-body conversion principle to harvest this energy using graphene-based pyroelectric conversion devices made with an active layer encapsulated between two graphene field-effect transistors which are deposited on the source and on the cold sink. By tuning the bias voltage applied to the gates of these transistors, the thermal state and the spontaneous polarization of the active layer can be controlled at kHz frequencies. We demonstrate that the power density generated by these conversion systems can reach [Formula: see text] using pyroelectric Ericsson cycles, a value which surpasses the current production capacity of near-field thermophotovoltaic conversion devices by more than three orders of magnitude with low grade heat sources ([Formula: see text]) and small temperature differences ([Formula: see text]).

| S-EPMC8484632 | biostudies-literature

'Squeezing' near-field thermal emission for ultra-efficient high-power thermophotovoltaic conversion.

Project description:We numerically demonstrate near-field planar ThermoPhotoVoltaic systems with very high efficiency and output power, at large vacuum gaps. Example performances include: at 1200?°K emitter temperature, output power density 2?W/cm(2) with ~47% efficiency at 300?nm vacuum gap; at 2100?°K, 24?W/cm(2) with ~57% efficiency at 200?nm gap; and, at 3000?°K, 115?W/cm(2) with ~61% efficiency at 140?nm gap. Key to this striking performance is a novel photonic design forcing the emitter and cell single modes to cros resonantly couple and impedance-match just above the semiconductor bandgap, creating there a 'squeezed' narrowband near-field emission spectrum. Specifically, we employ surface-plasmon-polariton thermal emitters and silver-backed semiconductor-thin-film photovoltaic cells. The emitter planar plasmonic nature allows for high-power and stable high-temperature operation. Our simulations include modeling of free-carrier absorption in both cell electrodes and temperature dependence of the emitter properties. At high temperatures, the efficiency enhancement via resonant mode cross-coupling and matching can be extended to even higher power, by appropriately patterning the silver back electrode to enforce also an absorber effective surface-plasmon-polariton mode. Our proposed designs can therefore lead the way for mass-producible and low-cost ThermoPhotoVoltaic micro-generators and solar cells.

| S-EPMC4929479 | biostudies-literature

Structured graphene metamaterial selective absorbers for high efficiency and omnidirectional solar thermal energy conversion.

Project description:An ideal solar-thermal absorber requires efficient selective absorption with a tunable bandwidth, excellent thermal conductivity and stability, and a simple structure for effective solar thermal energy conversion. Despite various solar absorbers having been demonstrated, these conditions are challenging to achieve simultaneously using conventional materials and structures. Here, we propose and demonstrate three-dimensional structured graphene metamaterial (SGM) that takes advantages of wavelength selectivity from metallic trench-like structures and broadband dispersionless nature and excellent thermal conductivity from the ultrathin graphene metamaterial film. The SGM absorbers exhibit superior solar selective and omnidirectional absorption, flexible tunability of wavelength selective absorption, excellent photothermal performance, and high thermal stability. Impressive solar-to-thermal conversion efficiency of 90.1% and solar-to-vapor efficiency of 96.2% have been achieved. These superior properties of the SGM absorber suggest it has a great potential for practical applications of solar thermal energy harvesting and manipulation.

| S-EPMC7069956 | biostudies-literature

Observing of the super-Planckian near-field thermal radiation between graphene sheets.

Project description:Thermal radiation can be substantially enhanced in the near-field scenario due to the tunneling of evanescent waves. Monolayer graphene could play a vital role in this process owing to its strong infrared plasmonic response, however, which still lacks an experimental verification due to the technical challenges. Here, we manage to make a direct measurement about plasmon-mediated thermal radiation between two macroscopic graphene sheets using a custom-made setup. Super-Planckian radiation with efficiency 4.5 times larger than the blackbody limit is observed at a 430-nm vacuum gap on insulating silicon hosting substrates. The positive role of graphene plasmons is further confirmed on conductive silicon substrates which have strong infrared loss and thermal emittance. Based on these, a thermophotovoltaic cell made of the graphene-silicon heterostructure is lastly discussed. The current work validates the classic thermodynamical theory in treating graphene and also paves a way to pursue the application of near-field thermal management.

| S-EPMC6168489 | biostudies-other

Form-Stable Composite Phase Change Materials Based on Porous Copper-Graphene Heterostructures for Solar Thermal Energy Conversion and Storage.

Project description:Solar-thermal energy conversion and storage technology has attracted great interest in the past few decades. Phase change materials (PCMs), by storing and releasing solar energy, are able to effectively address the imbalance between energy supply and demand, but they still have the disadvantage of low thermal conductivity and leakage problems. In this work, new form-stable solar thermal storage materials by impregnating paraffin PCMs within porous copper-graphene (G-Cu) heterostructures were designed, which integrated high thermal conductivity, high solar energy absorption, and anti-leakage properties. In this new structure, graphene can directly absorb and store solar energy in the paraffin PCMs by means of phase change heat transfer. The porous structure provided good heat conduction, and the large surface area increased the loading capacity of solar thermal storage materials. The small pores and superhydrophobic surfaces of the modified porous G-Cu heterostructures effectively hindered the leakage issues during the phase change process. The experimental results exhibited that the thermal conductivity of the prepared form-stable PCM composites was up to 2.99 W/(m·K), and no leakage took place in the solar-thermal charging process. At last, we demonstrated that the PCM composites as an energy source were easily integrated with a thermoelectric chip to generate electric energy by absorbing and converting solar energy.

| S-EPMC10748072 | biostudies-literature

Thermionic Energy Conversion Based on Graphene van der Waals Heterostructures.

Project description:Seeking for thermoelectric (TE) materials with high figure of merit (or ZT), which can directly converts low-grade wasted heat (400 to 500 K) into electricity, has been a big challenge. Inspired by the concept of multilayer thermionic devices, we propose and design a solid-state thermionic devices (as a power generator or a refrigerator) in using van der Waals (vdW) heterostructure sandwiched between two graphene electrodes, to achieve high energy conversion efficiency in the temperature range of 400 to 500 K. The vdW heterostructure is composed of suitable multiple layers of transition metal dichalcogenides (TMDs), such as MoS2, MoSe2, WS2 and WSe2. From our calculations, WSe2 and MoSe2 are identified as two ideal TMDs (using the reported experimental material's properties), which can harvest waste heat at 400 K with efficiencies about 7% to 8%. To our best knowledge, this design is the first in combining the advantages of graphene electrodes and TMDs to function as a thermionic-based device.

| S-EPMC5384245 | biostudies-literature

Semiconductor-based Multilayer Selective Solar Absorber for Unconcentrated Solar Thermal Energy Conversion.

Project description:Solar thermal energy conversion has attracted substantial renewed interest due to its applications in industrial heating, air conditioning, and electricity generation. Achieving stagnation temperatures exceeding 200?°C, pertinent to these technologies, with unconcentrated sunlight requires spectrally selective absorbers with exceptionally low emissivity in the thermal wavelength range and high visible absorptivity for the solar spectrum. In this Communication, we report a semiconductor-based multilayer selective absorber that exploits the sharp drop in optical absorption at the bandgap energy to achieve a measured absorptance of 76% at solar wavelengths and a low emittance of approximately 5% at thermal wavelengths. In field tests, we obtain a peak temperature of 225?°C, comparable to that achieved with state-of-the-art selective surfaces. With straightforward optimization to improve solar absorption, our work shows the potential for unconcentrated solar thermal systems to reach stagnation temperatures exceeding 300?°C, thereby eliminating the need for solar concentrators for mid-temperature solar applications such as supplying process heat.

| S-EPMC5509749 | biostudies-literature

Photovoltaic Energy Conversion and Storage of Micro-Supercapacitors Based on Emulsion Self-Assembly of Upconverting Nanoparticles.

Project description:With the rapid need for new kinds of portable and wearable electronics, we must look to develop flexible, small-volume, and high-performance supercapacitors that can be easily produced and stored in a sustainable way. An integrated system simultaneously converting recyclable energy to electricity and storing energy is sought after. Here we report photovoltaic energy conversion and storage integrated micro-supercapacitors (MSCs) with asymmetric, flexible, and all-solid-state performances constructed from thousands of close-packed upconverting nanoparticles (UCNPs) via an emulsion-based self-assembly process using oleic acid (OA)-capped upconverting nanoparticles. The carbonated-UCNPs supraparticles (CSPs) are further coated with polypyrrole (PPy) to improve their electrochemical performance. Such a design can develop CSPs@PPy as electrode materials with high gravimetric capacitance, 308.6 F g-1 at 0.6 A g-1. The fabricated MSCs exhibit excellent areal capacitance, C s = 21.8 mF cm-2 at 0.36 A cm-2 and E = 0.00684 mWh cm-2, and have superior flexibility and cycling ability. The MSC devices have a sensitive near-infrared ray (NIR) photoelectrical response capability, which can capture the NIR of sunlight to convert it into electrical energy and store the electric energy due to an excellent capacitive performance. We propose a method for multifunctional integration of energy conversion and storage, and provide future research directions and potential applications of self-powered flexible wearable photonic electronics.

| S-EPMC8554843 | biostudies-literature

Biomass-Based Shape-Stabilized Composite Phase-Change Materials with High Solar-Thermal Conversion Efficiency for Thermal Energy Storage.

Project description:To alleviate the increasing energy crisis and achieve energy saving and consumption reduction in building materials, preparing shape-stabilized phase-change materials using bio-porous carbon materials from renewable organic waste to building envelope materials is an effective strategy. In this work, pine cone porous biomass carbon (PCC) was prepared via a chemical activation method using renewable biomaterial pine cone as a precursor and potassium hydroxide (KOH) as an activator. Polyethylene glycol (PEG) and octadecane (OD) were loaded into PCC using the vacuum impregnation method to prepare polyethylene glycol/pine cone porous biomass carbon (PEG/PCC) and octadecane/pine cone porous biomass carbon (OD/PCC) shape-stabilized phase-change materials. PCCs with a high specific surface area and pore volume were obtained by adjusting the calcination temperature and amount of KOH, which was shown as a caterpillar-like and block morphology. The shape-stabilized PEG/PCC and OD/PCC composites showed high phase-change enthalpies of 144.3 J/g and 162.3 J/g, and the solar-thermal energy conversion efficiencies of the PEG/PCC and OD/PCC reached 79.9% and 84.8%, respectively. The effects of the contents of PEG/PCC and OD/PCC on the temperature-controlling capability of rigid polyurethane foam composites were further investigated. The results showed that the temperature-regulating and temperature-controlling capabilities of the energy-storing rigid polyurethane foam composites were gradually enhanced with an increase in the phase-change material content, and there was a significant thermostatic plateau in energy absorption at 25 °C and energy release at 10 °C, which decreased the energy consumption.

| S-EPMC10534447 | biostudies-literature

Novel Magnetic-to-Thermal Conversion and Thermal Energy Management Composite Phase Change Material.

Project description:Superparamagnetic materials have elicited increasing interest due to their high-efficiency magnetothermal conversion. However, it is difficult to effectively manage the magnetothermal energy due to the continuous magnetothermal effect at present. In this study, we designed and synthesized a novel Fe₃O₄/PEG/SiO₂ composite phase change material (PCM) that can simultaneously realize magnetic-to-thermal conversion and thermal energy management because of outstanding thermal energy storage ability of PCM. The composite was fabricated by in situ doping of superparamagnetic Fe₃O₄ nanoclusters through a simple sol⁻gel method. The synthesized Fe₃O₄/PEG/SiO₂ PCM exhibited good thermal stability, high phase change enthalpy, and excellent shape-stabilized property. This study provides an additional promising route for application of the magnetothermal effect.

| S-EPMC6404046 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data