Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Bifunctional thermoelectric tube made of tilted multilayer material as an alternative to standard heat exchangers.

ABSTRACT: Enormously large amount of heat produced by human activities is now mostly wasted into the environment without use. To realize a sustainable society, it is important to develop practical solutions for waste heat recovery. Here, we demonstrate that a tubular thermoelectric device made of tilted multilayer of Bi(0.5)Sb(1.5)Te3/Ni provides a promising solution. The Bi(0.5)Sb(1.5)Te3/Ni tube allows tightly sealed fluid flow inside itself, and operates in analogy with the standard shell and tube heat exchanger. We show that it achieves perfect balance between efficient heat exchange and high-power generation with a heat transfer coefficient of 4.0 kW/m(2)K and a volume power density of 10 kW/m(3) using low-grade heat sources below 100°C. The Bi(0.5)Sb(1.5)Te3/Ni tube thus serves as a power generator and a heat exchanger within a single unit, which is advantageous for developing new cogeneration systems in factories, vessels, and automobiles where cooling of excess heat is routinely carried out.

SUBMITTER: Takahashi K

PROVIDER: S-EPMC3603303 | biostudies-other | 2013

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Breaking the trade-off between thermal and electrical conductivities in the thermoelectric material of an artificially tilted multilayer.

Project description:Breaking the trade-off between thermoelectric (TE) parameters has long been demanded in order to highly enhance its performance. Here, we report the 'trade-off-free' interdependence between thermal conductivity (κ) and resistivity (ρ) in a TE/metal tilted multilayer and significant enhancement of TE power generation based on the off-diagonal thermoelectric (ODTE) effect, which generates transverse electrical current in response to vertical thermal current. ρ and κ can be simultaneously decreased by setting charge flow along more-electrically conductive layer and thermal flow across less-thermally conductive perpendicular direction by decreasing the tilting angle. Moreover, introducing porosity in the metal layer enables to decrease in κ without changing ρ, because the macroscopic ρ and κ of the tilted multilayer is respectively governed by the properties of the TE material and the metal with large dissimilarity. The obtained results reveal new strategies for developing trade-off-free TE materials, which will stimulate practical use of TE conversion for waste-heat recovery.

| S-EPMC4133718 | biostudies-literature

Microstructure and chemical data of the thermoelectric ZnSb material after joining to metallic electrodes and heat treatment.

Project description:The data presented in this article are related to the research article entitled: "Solder free joining as a highly effective method for making contact between thermoelectric materials and metallic electrodes" (Malik et al., 2017) [1]. This article presents microstructure obtained by scanning electron microscopy (SEM) and chemical analysis by energy dispersive X-ray spectroscopy (EDX) point measurements of the thermoelectric ZnSb legs after joining to metallic electrodes using solder (Zn-2Al) and free-soldering methods.

| S-EPMC5614718 | biostudies-literature

Comfortable, high-efficiency heat pump with desiccant-coated, water-sorbing heat exchangers.

Project description:Comfortable, efficient, and affordable heating, ventilation, and air conditioning systems in buildings are highly desirable due to the demands of energy efficiency and environmental friendliness. Traditional vapor-compression air conditioners exhibit a lower coefficient of performance (COP) (typically 2.8-3.8) owing to the cooling-based dehumidification methods that handle both sensible and latent loads together. Temperature- and humidity-independent control or desiccant systems have been proposed to overcome these challenges; however, the COP of current desiccant systems is quite small and additional heat sources are usually needed. Here, we report on a desiccant-enhanced, direct expansion heat pump based on a water-sorbing heat exchanger with a desiccant coating that exhibits an ultrahigh COP value of more than 7 without sacrificing any comfort or compactness. The pump's efficiency is doubled compared to that of pumps currently used in conventional room air conditioners, which is a revolutionary HVAC breakthrough. Our proposed water-sorbing heat exchanger can independently handle sensible and latent loads at the same time. The desiccants adsorb moisture almost isothermally and can be regenerated by condensation heat. This new approach opens up the possibility of achieving ultrahigh efficiency for a broad range of temperature- and humidity-control applications.

| S-EPMC5227918 | biostudies-literature

Thermofluidic heat exchangers for actuation of transcription in artificial tissues.

Project description:Spatial patterns of gene expression in living organisms orchestrate cell decisions in development, homeostasis, and disease. However, most methods for reconstructing gene patterning in 3D cell culture and artificial tissues are restricted by patterning depth and scale. We introduce a depth- and scale-flexible method to direct volumetric gene expression patterning in 3D artificial tissues, which we call "heat exchangers for actuation of transcription" (HEAT). This approach leverages fluid-based heat transfer from printed networks in the tissues to activate heat-inducible transgenes expressed by embedded cells. We show that gene expression patterning can be tuned both spatially and dynamically by varying channel network architecture, fluid temperature, fluid flow direction, and stimulation timing in a user-defined manner and maintained in vivo. We apply this approach to activate the 3D positional expression of Wnt ligands and Wnt/β-catenin pathway regulators, which are major regulators of development, homeostasis, regeneration, and cancer throughout the animal kingdom.

| S-EPMC7527231 | biostudies-literature

?-Ag2S: A Ductile Thermoelectric Material with High ZT.

Project description:Using first-principles calculation and Boltzmann electron/phonon transport theory, we present an accurate theoretical prediction of thermoelectric properties of the ?-Ag2S crystal, a ductile inorganic semiconductor reported experimentally [Nat. Mater. 2018, 17, 421]. The semiconductor ?-Ag2S has ultralow thermal conductivity associated with high anisotropy, which can be attributed to the complex crystalline structure and weak bonding. The optimal values of the Seebeck coefficient are 0.27 × 10-3 V/K for n-type and 0.21 × 10-3 V/K for p-type ?-Ag2S, respectively, which are comparable to those of many promising thermoelectric materials. As a consequence, a maximum ZT value of 0.97/1.12 can be realized for p-type/n-type ?-Ag2S at room temperature. More interestingly, the value of ZT can be further enhanced to 1.65 at room temperature by applying 5% compressive strain. Moreover, we find that the electronic thermal conductivity is a major factor limiting the ZT, which is several times the lattice thermal conductivity for n-type ?-Ag2S. Our work demonstrates the great advantage of the ?-Ag2S crystal as a ductile thermoelectric material and sparks new routes to improve its figure of merit.

| S-EPMC7097892 | biostudies-literature

Enhanced Light-Induced Transverse Thermoelectric Effect in Tilted BiCuSeO Film via the Ultra-thin AuNPs Layer.

Project description:Significant enhancement of light-induced transverse thermoelectric (LITT) effect in tilted BiCuSeO film has been achieved via introduction of an ultra-thin layer of gold nanoparticles (AuNPs) with the thickness of a few nanometers. In both cases of pulsed and continuous light irradiation, about two times increment in the LITT voltage sensitivity is observed for the BiCuSeO film coated with 4-nm-thick AuNPs layer. This can be ascribed to the increased photo-thermal conversion efficiency in the LITT effect owing to the efficient usage of the incident light of AuNPs layer. Thicker AuNPs layer will suppress the voltage sensitivity increment due to the electrical connectivity effect. This work provides an effective strategy for optimizing the performance of thermal-type optical detectors based on the LITT effect.

| S-EPMC6895342 | biostudies-literature

Machine-learning guided discovery of a new thermoelectric material.

Project description:Thermoelectric technologies are becoming indispensable in the quest for a sustainable future. Recently, an emerging phenomenon, the spin-driven thermoelectric effect (STE), has garnered much attention as a promising path towards low cost and versatile thermoelectric technology with easily scalable manufacturing. However, progress in development of STE devices is hindered by the lack of understanding of the fundamental physics and materials properties responsible for the effect. In such nascent scientific field, data-driven approaches relying on statistics and machine learning, instead of more traditional modeling methods, can exhibit their full potential. Here, we use machine learning modeling to establish the key physical parameters controlling STE. Guided by the models, we have carried out actual material synthesis which led to the identification of a novel STE material with a thermopower an order of magnitude larger than that of the current generation of STE devices.

| S-EPMC6391459 | biostudies-literature

n-type thermoelectric material Mg2Sn0.75Ge0.25 for high power generation.

Project description:Thermoelectric power generation is one of the most promising techniques to use the huge amount of waste heat and solar energy. Traditionally, high thermoelectric figure-of-merit, ZT, has been the only parameter pursued for high conversion efficiency. Here, we emphasize that a high power factor (PF) is equivalently important for high power generation, in addition to high efficiency. A new n-type Mg2Sn-based material, Mg2Sn0.75Ge0.25, is a good example to meet the dual requirements in efficiency and output power. It was found that Mg2Sn0.75Ge0.25 has an average ZT of 0.9 and PF of 52 μW⋅cm(-1)⋅K(-2) over the temperature range of 25-450 °C, a peak ZT of 1.4 at 450 °C, and peak PF of 55 μW⋅cm(-1)⋅K(-2) at 350 °C. By using the energy balance of one-dimensional heat flow equation, leg efficiency and output power were calculated with Th = 400 °C and Tc = 50 °C to be of 10.5% and 6.6 W⋅cm(-2) under a temperature gradient of 150 °C⋅mm(-1), respectively.

| S-EPMC4371904 | biostudies-literature

A Model for Material Metrics in Thermoelectric Thomson Coolers.

Project description:Thomson heat absorption corresponding to changes in the Seebeck coefficient with respect to temperature enables the design of thermoelectric coolers wherein Thomson cooling is the dominant term, i.e., the Thomson coolers. Thomson coolers extend the working range of Peltier coolers to larger temperature differences and higher electrical currents. The Thomson coefficient is small in most materials. Recently, large Thomson coefficient values have been measured attributed to thermally induced phase change during magnetic and structural phase transitions. The large Thomson coefficient observed can result in the design of highly efficient Thomson coolers. This work analyzes the performance of Thomson coolers analytically and sets the metrics for evaluating the performance of materials as their constituent components. The maximum heat flux when the Thomson coefficient is constant is obtained and the performance is compared to Peltier coolers. Three dimensionless parameters are introduced which determine the performance of the Thomson coolers and can be used to analyze the coefficient of performance, the maximum heat flux, and the maximum temperature difference of a Thomson cooler.

| S-EPMC10670593 | biostudies-literature

Chalcopyrite Nanoparticles as a Sustainable Thermoelectric Material.

Project description:In this report, copper iron sulfide nanoparticles with various composition were synthesized by a thermolysis based wet chemical method. These inherently sustainable nanoparticles were then fully characterized in terms of composition, structure, and morphology, as well as for suitability as a thermoelectric material. The merits of the material preparation include a straightforward bulk material formation where particles do not require any specialized treatment, such as spark plasma sintering or thermal heating. The Seebeck coefficient of the materials reveals P-type conductivity with a maximum value of 203 µV/K. The results give insight into how to design and create a new class of sustainable nanoparticle material for thermoelectric applications.

| S-EPMC5304799 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data