Dataset Information

Distribution of lung tissue hysteresis during free breathing.

ABSTRACT: To characterize and quantify free breathing lung tissue motion distributions.Forty seven patient data sets were acquired using a 4DCT protocol consisting of 25 ciné scans at abutting couch positions on a 16-slice scanner. The tidal volume of each scan was measured by simultaneously acquiring spirometry and an abdominal pneumatic bellows. The concept of a characteristic breath was developed to manage otherwise natural breathing pattern variations. The characteristic breath was found by first dividing the breathing traces into individual breaths, from maximum exhalation to maximum exhalation. A linear breathing drift model was assumed and the drift removed for each breath. Breaths that exceeded one standard deviation in period or amplitude were removed from further analysis. A characteristic breath was defined by normalizing each breath to a common amplitude, aligning the peak inhalation times for all of the breaths, and determining the average time at each tidal volume, keeping inhalation and exhalation separate. Breathing motion trajectories were computed using a previously published five-dimensional lung tissue trajectory model which expresses the position of internal lung tissue, X, as: X(v,f:X0)=X0+α(X0)v+β(X0)f, where X0 is the internal lung tissue position at zero tidal volume and zero airflow, the scalar values v and f are the measured tidal volume and airflow, respectively, and the vectors α and β are fitted free parameters. In order to characterize the motion patterns, the trajectory elongations were examined throughout the subject's lungs. Elongation was defined here by generating a rectangular bounding box with one side parallel to the α vector and the box oriented in the plane defined by the α and β motion vectors. Hysteresis motion was defined as the ratio of the box dimensions aligned orthogonal to and parallel to the α vector. The 15th and 85th percentile of the elongation were used to characterize tissue trajectory hysteresis.The 15th and 85th percentile bounding box elongations were 0.090 ± 0.005 and 0.083 ± 0.013 in the upper left lung and 0.187 ± 0.037 and 0.203 ± 0.053, in the lower left lung. The 15th and 85th percentiles for the upper right lung were 0.092 ± 0.006 and 0.085 ± 0.013, and 0.184 ± 0.038, and 0.196 ± 0.043 in the lower right lung. Both percentiles were calculated for tidal volume displacements between 5 and 15 mm. In the left lung, the average elongations in the upper and lower lung were ζ=0.120 ± 0.064 and ζ=0.090 ± 0.055, respectively. The average elongations in the upper and lower right lung were ζ=0.107 ± 0.060 and ζ=0.082 ± 0.048, respectively. The elongation varied smoothly throughout the lungs.The hysteresis motion was relatively small compared to the volume-filling motion, contributing between 8% and 20% of the overall motion. Statistically significant differences were observed in the range of hysteresis contribution for upper and lower lung regions. The characteristic breath process provided an excellent method for defining an average breath. The characteristic breath had continuous tidal volume and airflow characteristics when the breath was continuously repeated,useful for generating patterns representative of realistic motion for breathing motion studies.

SUBMITTER: White B

PROVIDER: S-EPMC3612117 | biostudies-other | 2013 Apr

REPOSITORIES: biostudies-other

ACCESS DATA

Similar Datasets

Project description:PurposeAccurate verification of tumor position during irradiation could reduce the probability of target miss. We investigated whether a commercial gantry-mounted 2-dimensional (2D) kilo-voltage (kV) imaging system could be used for real-time 3D tumor tracking during volumetric modulated arc therapy (VMAT) lung stereotactic body radiation therapy (SBRT). Markerless tumor tracking on kV fluoroscopic images was validated using a life-like moving thorax phantom and subsequently performed on kV images continuously acquired before and during free-breathing VMAT lung SBRT.Methods and materialsThe 3D-printed/molded phantom containing 3 lung tumors was moved in 3D in TrueBeam developer mode, using simulated regular/irregular breathing patterns. Planar kV images were acquired at 7 frames/s during 11 Gy/fraction 10 MV flattening filter free VMAT. 2D reference templates were created for each gantry angle using the planning 4D computed tomography inspiration phase. kV images and templates were matched using normalized cross correlation to determine 2D tumor position, and triangulation of 2D matched projections determined the third dimension. 3D target tracking performed on cone beam computed tomography projection data from 18 patients (20 tumors) and real-time online tracking data from 2 of the 18 patients who underwent free-breathing VMAT lung SBRT are presented.ResultsFor target 1 and 2 of the phantom (upper lung and middle/medial lung, mean density -130 Hounsfield units), 3D results within 2 mm of the known position were present in 92% and 96% of the kV projections, respectively. For target 3 (inferior lung, mean density -478 Hounsfield units) this dropped to 80%. Benchmarking against the respiratory signal, 13/20 (65%) tumors (10.5 ± 11.1 cm3) were considered successfully tracked on the cone beam computed tomography data. Tracking was less successful (≤50% of the time) in 7/20 (1.2 ± 1.5 cm3). Successful online tracking during lung SBRT was demonstrated.Conclusions3D markerless tumor tracking on a standard linear accelerator using template matching and triangulation of free-breathing kV fluoroscopic images was possible in 65% of small lung tumors. The smallest tumors were most challenging.

Project description:BackgroundImaging the lung parenchyma with magnetic resonance imaging (MRI) is challenging due to cardiac and respiratory motion, the low proton density and short T2* relaxation time, and therefore not well established in the clinical routine. As a further step in facilitating lung MRI for longitudinal monitoring, this study aimed to assess the reproducibility of 2D ultrashort echo time (UTE)-derived lung function parameters in healthy subjects.MethodsIn this study, a 2D UTE technique was combined with tiny golden angle (tyGA) ordering. Data were acquired either during breath-holds (BH) or continuously during free-breathing (FB) at a field strength of 3T. Retrospective self-gating (image- and k-space-based) was used to reconstruct respiratory and cardiac multistage images from the FB acquisitions. The reproducibility of functional lung parameters derived from BH and FB acquisitions was assessed for three independent examinations (M1-3). M1 and M2 were acquired within 2 h, whereas M3 was acquired at least 14 d after M1/2. Different respiratory and cardiac phases were reconstructed for three coronal slices. Quantitative analysis including proton fraction (fP ), apparent signal-to-noise ratio (apparent SNR), fractional ventilation (FV), and perfusion (f) was performed by two independent observers, and inter-measurement and inter-observer repeatability were assessed.ResultsAll scans could be performed successfully in all volunteers. Intraclass correlation coefficients (ICC) of inter-measurement and inter-observer variability, and Bland-Altman analysis showed good to very good reproducibility. Larger breathing amplitudes were observed in the BH acquisitions, which also showed lower reproducibility when compared with the FB acquisitions. For the FB approach, the ICC ranged between 0.70 and 0.98 for all measurements, and ranged between 0.86 and 0.97 for the two observers. No bias or significant differences were observed between the three measurements or the two observers in healthy volunteers.ConclusionsThe study proves the feasibility of FB 2D tyGA UTE for lung imaging. Functional parameters derived from FB acquisitions are reproducible in healthy volunteers, allowing for further investigation of this technique in patients with various underlying diseases.

Project description:Introduction: Low-intensity endurance training is frequently performed at gradually higher training intensities than intended, resulting in a shift towards threshold training. By restricting oral breathing and only allowing for nasal breathing this shift might be reduced. Methods: Nineteen physically healthy adults (3 females, age: 26.5 ± 5.1 years; height: 1.77 ± 0.08 m; body mass: 77.3 ± 11.4 kg; VO2peak: 53.4 ± 6.6 mL·kg-1 min-1) performed 60 min of self-selected, similar (144.7 ± 56.3 vs. 147.0 ± 54.2 W, p = 0.60) low-intensity cycling with breathing restriction (nasal-only breathing) and without restrictions (oro-nasal breathing). During these sessions heart rate, respiratory gas exchange data and power output data were recorded continuously. Results: Total ventilation (p < 0.001, ηp 2 = 0.45), carbon dioxide release (p = 0.02, ηp 2 = 0.28), oxygen uptake (p = 0.03, ηp 2 = 0.23), and breathing frequency (p = 0.01, ηp 2 = 0.35) were lower during nasal-only breathing. Furthermore, lower capillary blood lactate concentrations were found towards the end of the training session during nasal-only breathing (time x condition-interaction effect: p = 0.02, ηp 2 = 0.17). Even though discomfort was rated marginally higher during nasal-only breathing (p = 0.03, ηp 2 = 0.24), ratings of perceived effort did not differ between the two conditions (p ≥ 0.06, ηp 2 = 0.01). No significant "condition" differences were found for intensity distribution (time spent in training zone quantified by power output and heart rate) (p ≥ 0.24, ηp 2 ≤ 0.07). Conclusion: Nasal-only breathing seems to be associated with possible physiological changes that may help to maintain physical health in endurance athletes during low intensity endurance training. However, it did not prevent participants from performing low-intensity training at higher intensities than intended. Longitudinal studies are warranted to evaluate longitudinal responses of changes in breathing patterns.

Dataset Information

Distribution of lung tissue hysteresis during free breathing.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets